Test Report_DTS_WLAN_Part 1

FCC ID: QISVOG-LX9

Test Report

Download: PDF
FCCID_4179066

FCC RF Test Report Product Name: Smart Phone Model Number: VOG-L29/VOG-L09 Report No.: SYBH(Z-RF)20181224014002-2002 FCC ID: QISVOG-LX9 APPROVED PREPARED Authorized (Lab Manager) (Test Engineer) BY DATE 2019-01-28 2019-01-28 Reliability Laboratory of Huawei Technologies Co., Ltd. (Global Compliance and Testing Center of Huawei Technologies Co., Ltd) No.2, New City Avenue, Songshan Lake Sci. & Tech. Industry Park, Dongguan, 523808, P.R.C Telephone: +86 769 23830808 Fax: +86 769 23837628

RF Report for VOG-L29/VOG-L09 Public ※ ※ Notice ※ ※ 1. The laboratory has passed the accreditation by The American Association for Laboratory Accreditation (A2LA). The accreditation number is 2174.01. 2. The laboratory has been recognized by the US Federal Communications Commission (FCC) to perform compliance testing subject to the Commission's Certification rules. The Designation Number is CN1173, and the Test Firm Registration Number is 294140. 3. The laboratory has been recognized by the Innovation, Science and Economic Development Canada (ISED) to test to Canadian radio equipment requirements. The CAB identifier is CN0003, an d the ISED# is 21741. 4. The laboratory (Reliability Lab of Huawei Technologies Co., Ltd) is also named “Global Compliance and Testing Center of Huawei Technologies Co., Ltd”, the both names have coexisted since 2009. 5. The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. 6. The test report is invalid if there is any evidence of erasure and/or falsification. 7. The test report is only valid for the test samples. 8. Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without prior written approval from the laboratory. 9. If any question about this report, please contact the laboratory (PublicGCTC@huawei.com). Report No.: Huawei Proprietary and Confidential Page 2 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public MODIFICATION RECORD No. Report No Modification Description 1 SYBH(Z-RF)2018122 First release. 4014002-2002 DECLARATION Type Description Multiple The present report applies to single model. Models The present report applies to several models. The practical measurements are Applications performed with the model VOG-L29. These models utilize the similar radio design, shielding, interface, physical layout and so on. The differences and modifications between these models are declared by the applicant and showed in General Description All others between these models are identical. The present report only presents the worst test case of all modes, see relevant test results for detailed. Report No.: Huawei Proprietary and Confidential Page 3 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public 1 Table of contents 1 Table of contents ................................................................................. 4 2 General Information ............................................................................... 5 2.1 Test standard/s ........................................................................... 5 2.2 Test Environment ......................................................................... 5 2.3 Test Laboratories ......................................................................... 5 2.4 Applicant and Manufacturer ................................................................. 6 2.5 Application details ......................................................................... 6 3 Test Summary ................................................................................... 6 4 Description of the Equipment under Test (EUT) ....................................................... 8 4.1 General Description ....................................................................... 8 4.2 EUT Identity ............................................................................. 11 4.3 Technical Description ..................................................................... 12 5 General Test Conditions / Configurations ............................................................ 14 5.1 Test Modes ............................................................................. 14 5.2 EUT Configurations....................................................................... 14 5.3 Antenna requirements .................................................................... 16 5.4 Description of tests ....................................................................... 17 5.5 Test Setups ............................................................................. 19 5.6 Test Conditions .......................................................................... 22 5.7 Main Instruments ......................................................................... 26 6 Measurement Uncertainty ......................................................................... 28 Report No.: Huawei Proprietary and Confidential Page 4 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public 2 General Information 2.1 Test standard/s 47 CFR FCC Part 2, Subpart J Applied Rules : 47 CFR FCC Part 15, Subpart C FCC KDB 558074 D01 DTS Meas Guidance v05 FCC KDB 662911 D01 Multiple Transmitter Output v02r01 Test Method : ANSI C63.10-2013, American National Standard for Testing Unlicensed Wireless Devices. 2.2 Test Environment Temperature : TN 15 to 30 °C during room temperature tests Ambient Relative Humidity: 20 to 85 % Atmospheric Pressure: Not applicable VL 3.6 V Power supply : VN 3.82 V DC by Battery VH 4.35 V NOTE 1: 1) VN= nominal voltage, VL= low extreme test voltage, VH= High extreme test voltage; TN= normal temperature, TL= low extreme test temperature, TH= High extreme test temperature. NOTE 2: The values used in the test report may be stringent than the declared. 2.3 Test Laboratories RELIABILITY LABORATORY OF HUAWEI TECHNOLOGIES CO., Test Location 1 : LTD. No.2, New City Avenue, Songshan Lake Sci. & Tech. Industry Park, Address of Test Location 1 : Dongguan, 523808, P.R.C Report No.: Huawei Proprietary and Confidential Page 5 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public 2.4 Applicant and Manufacturer Company Name : HUAWEI TECHNOLOGIES CO., LTD Administration Building, Headquarters of Huawei Technologies Co., Ltd., Address : Bantian, Longgang District, Shenzhen, 518129, P.R.C 2.5 Application details Date of Receipt Sample: 2019-01-02 Start of test: 2019-01-03 End of test: 2019-01-28 3 Test Summary FCC Rule Test Item Requirements Test Result Verdict No. Refer to No. DTS (6 dB) 15.247(a)(2) ≥ 500 kHz. SYBH(Z-RF)2018 Pass Bandwidth 1218028001-2002 Refer to No. Occupied --- No limit SYBH(Z-RF)2018 Pass Bandwidth 1218028001-2002 KDB Refer to No. Duty Cycle 558074 D01 No limit SYBH(Z-RF)2018 Pass （6.0） 1218028001-2002 Maximum FCC: For directional gain: Conducted < 30 Refer to No. Average 15.247(b)(3) dBm – (G[dBi] – 6 [dB]); Otherwise: SYBH(Z-RF)2018 Pass Output Power Conducted < 30 dBm, 1218028001-2002 Maximum Refer to No. Power 15.247(e) Conducted < 8 dBm/3 kHz. SYBH(Z-RF)2018 Pass Spectral 1218028001-2002 Density Level Band Edges Refer to No. Compliance SYBH(Z-RF)2018 Pass 1218028001-2002 Unwanted < -30 dBr/100 kHz if total average power ≤ 15.247(d) Emissions into power limit. Refer to No. Non-Restricted SYBH(Z-RF)2018 Pass Frequency 1218028001-2002 Bands Report No.: Huawei Proprietary and Confidential Page 6 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public FCC Rule Test Item Requirements Test Result Verdict No. Unwanted Emissions into 15.247(d) Refer to No. Restricted 15.209 FCC Part 15.209 field strength limit; SYBH(Z-RF)2018 Pass Frequency (NOTE 1) 1218028001-2002 Bands (Radiated) AC Power Line Refer to No. Conducted 15.207 FCC Part 15.207 conducted limit; SYBH(Z-RF)2018 Pass Emissions 1218028001-2002 Note1: According to KDB 558074 D01, antenna-port conducted measurements are acceptable as an alternative to radiated measurements for demonstrating compliance to the limits in the restricted frequency bands. If conducted measurements are performed, then proper impedance matching must be ensured and an additional radiated test for cabinet/case emissions will also be required. Note2: The transmitter has an integral PCB loop antenna that is enclosed within the housing of the EUT and meets the requirements of FCC 15.203 Note3: We do not test 2.4G WIFI of VOG-L29/VOG-L09, all test data can refer to No. SYBH(Z-RF)20181218028001-2002 of VOG-L04(FCC ID:QISVOG-L04). Report No.: Huawei Proprietary and Confidential Page 7 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public 4 Description of the Equipment under Test (EUT) 4.1 General Description VOG-L29 is a subscriber equipment in the GSM/WCDMA/LTE system. The GSM frequency band includes GSM850 and GSM900 and DCS1800 and PCS1900.The UMTS frequency band is B1 and B2 and B4 and B5 and B6 and B8 and B19. The LTE frequency band is B1 and B2 and B3 and B4 and B5 and B6 and B7 and B8 and B9 and B12 and B17and B18 and B19 and B20 and B26 and B28 and B32 and B34 and B38 and B39 and B40 and B41. The Mobile Phone implements such functions as RF signal receiving/transmitting, LTE/HSPA/UMTS and GSM/GPRS/EDGE protocol processing, voice, video MMS service, GPS, Bluetooth, NFC, Wi-Fi and Wirelessly Charging etc. VOG-L29 is a dual SIM smart phone, and one of the SIM card interfaces could be used as Nano memory card interface. Externally it provides type C USB charging port, and the port could be used as the earphone port or data-transfer port. VOG-L09 is a subscriber equipment in the GSM/WCDMA/LTE system. The GSM frequency band includes GSM850 and GSM900 and DCS1800 and PCS1900.The UMTS frequency band is B1 and B2 and B4 and B5 and B6 and B8 and B19. The LTE frequency band is B1 and B2 and B3 and B4 and B5 and B6 and B7 and B8 and B9 and B12 and B17and B18 and B19 and B20 and B26 and B28 and B32 and B34 and B38 and B39 and B40 and B41. The Mobile Phone implements such functions as RF signal receiving/transmitting, LTE/HSPA/UMTS and GSM/GPRS/EDGE protocol processing, voice, video MMS service, GPS, Bluetooth, NFC, Wi-Fi and Wirelessly Charging etc. VOG-L09 provides one SIM card interface and one Nano memory card interface. Externally it provides type C USB charging port, and the port could be used as the earphone port or data-transfer port. The difference between VOG-L29 and VOG-L09 The only difference between VOG-L29 and VOG-L09 is that VOG-L09 deletes into single SIM card by software. Other parts of the two models are the same. The difference between VOG-L29 and VOG-L04 is show in the below table. Model VOG-L29 VOG-L04 PCB The same The same Frequency-G The same The same SM Report No.: Huawei Proprietary and Confidential Page 8 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public Frequency-W The same The same CDMA The same Different Frequency-LT Support B32 Support B66 E Unsupport B66 Unsupport B32 The same Different 4*4 Mimo Support B1、B3、B7 Support B2、B4、B7、B66 SIM Card Dual Single Support B32 Location ID: SAW filter:Z3401,Z4104, B32 Diplexer:Z3402,Z5403 B32 RF RF low noise amplifier:U3405,U4103 Unsupport B32 circuit Capacitor:C3422,C3423,C3425,C3442,C2912,C3 Delete components related to the B32 RF circuit. 411,L3533,L4416,C3418,C4102 Inductor:L3412,L3422,L3413,L3408,L4124,L4137, L4139,L4140 Function Description:B32 main RF circuit and Har diversity RF circuit dwa Support B1/3/7 4*4MIMO and delete/replace Support B2/7/66(4) 4*4MIMO and delete/replace re components related circuit; components related circuit; Location ID: 4*4 Location ID: B1/3/7 MIMO(t B2/7/66(4) SAW filter: SAW filter of the 4th antenna :Z4403 he 3rd SAW filter of the 4th antenna :Z4403 (Vendor:KYOCERA type:SF18-1842M8SUA3) & 4th (Vendor:MURATA type:SATEY1G96AU3F0AR00) SAW filter of the 3rd antenna :Z4301 antenn SAW filter of the 3rd antenna :Z4301 (Vendor:KYOCERA type:SF18-1842M8SUA3) a) (Vendor:MURATA type:SATEY1G96AU3F0AR00) Capacitor:L5507,C5401,C5402,C5517,C3411,L35 Inductor:L4419,L4412,L4416,C5444,C5407,L5510 33,L4416 Function Description:B2/7/66(4) 4*4MIMO RF Inductor:L5510,L4330,L5415,L3408,L4419 circuit Function Description: B1/3/7 4*4MIMO RF circuit Report No.: Huawei Proprietary and Confidential Page 9 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public Unsupport CA_1-3-32 and delete/replace Unsupport B66 and delete/replace components components related circuit; related circuit; Support B66 &Support CA_2-66 Support CA_1-3-32 B1/B3/ Location ID: Location ID: B32 & B2/B7/B66(4) diversity TRI SAW filter:Z4105 B1/B3 Quadruplexer:Z3502(Vendor:QORVO, B2/B66 (Vendor:MURATA type:SATEY1G96AU3F0AR00) type:QM25002TR13-5KHW) RF B2/B66(B4) Quadruplexer:Z3502( Capacitor:C3533 &CA Vendor:KYOCERA type:SQ25-1745K6SUA4) B2 SAW filter: Z4101(Vendor:MURATA ect. circuit Capacitor:C3401,C3402,C3504,L4110 type:SAFFB1G96AB0F0AR1X ect. ) Inductor:L3532,L4111,L4112,L4107,L4109,L4114,L L4123,L4122,L3523,L3532,C3520,L3512,L4419 4108,L4118,C3520,L3533,L3512 Function Description:B2 RX and CA_1-3-32 Function Description:B2/B66 Single-band and CA diplexer RF circuit main and diversity RF circuits B7 receiving matching circuit is adjusted to include: B7 receive matching circuit include: B7 RX Inductor:C4101 circuit Inductor:L4127,L4126 B7 diversity TRI SAW filter:Z4105(Vendor:MURATA type:SATEY1G96AU3F0AR00) Software Different Different Dimensions The same The same Appearance The same The same main antenna The same The same DIV antenna The same The same BT/Wi-Fi The same The same antenna MIMO The same The same antenna NFC The same The same WPC The same The same Supported CA configuration Different Different s for DL CA Supported CA configuration The same The same s for UL CA Others NA NA Note1: Only 2.4G WIFI test data included in this report. Note2: We do not test 2.4G WIFI of VOG-L29/VOG-L09, all test data can refer to No. SYBH(Z-RF)20181218028001-2002 of VOG-L04(FCC ID:QISVOG-L04). Report No.: Huawei Proprietary and Confidential Page 10 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public 4.2 EUT Identity NOTE: Unless otherwise noted in the report, the functional boards installed in the units shall be selected from the below list, but not means all the functional boards listed below shall be installed in one unit. 4.2.1 Board Board Description Software Version Hardware Version Main Board 9.1.0.84(C432E84R1P1) HL2VOGUEM 4.2.2 Sub- Assembly Sub-Assembly Sub-Assembly Model Manufacturer Description Name Huawei Input voltage: 100-240V ~50/60Hz 1.2A Adapter HW-100400A00 Technologies Output voltage: 5V 2A OR 9V 2A Co., Ltd. OR 10V 4A Huawei Input voltage: 100-240V ~50/60Hz 1.2A Adapter HW-100400U00 Technologies Output voltage: 5V 2A OR 9V 2A Co., Ltd. OR 10V 4A Huawei Input voltage: 100-240V ~50/60Hz 1.2A Adapter HW-100400E00 Technologies Output voltage: 5V 2A OR 9V 2A Co., Ltd. OR 10V 4A Huawei Input voltage: 100-240V ~50/60Hz 1.2A Adapter HW-100400B00 Technologies Output voltage: 5V 2A OR 9V 2A Co., Ltd. OR 10V 4A Rated capacity: 4100mAh Huawei Nominal Voltage: +3.82V Battery HB486486ECW Technologies Co., Ltd. Charging Voltage: +4.4V Report No.: Huawei Proprietary and Confidential Page 11 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public 4.3 Technical Description NOTE: For the detailed technical descriptions, see the applicant/manufacturer’s specifications or user manual. Characteristics Description IEEE 802.11 802.11b (20 MHz channel bandwidth), 802.11g (20 MHz channel bandwidth) WLAN Mode 802.11n (20 MHz channel bandwidth), 802.11n (40 MHz channel bandwidth) Supported TX/RX Operating 2412-2462 fc = 2407 MHz + N * 5 MHz, where: Range MHz band - fc = “Operating Frequency” in MHz, - N = “Channel Number” with the range from 1 to 11 for the 20 MHz channel bandwidth, or 3 to 9 for the 40 MHz channel bandwidth. Data Rate 802.11b 1 Mbps, 2 Mbps, 5.5 Mbps, 11 Mbps 802.11g 6 Mbps, 9 Mbps, 12 Mbps, 18 Mbps, 24 Mbps, 36 Mbps, 48 Mbps, 54 Mbps 802.11g CDD 6 Mbps, 9 Mbps, 12 Mbps, 18 Mbps, 24 Mbps, 36 Mbps, 48 Mbps, 54 Mbps 802.11n MCS 0 to MCS 7 (SISO) 802.11n MCS 8 to MCS 15 (MIMO) Modulation Type DBPSK/DQPSK/CCK (DSSS), BPSK/QPSK/16QAM/64QAM (OFDM). Emission 11M8G7D (for 802.11b mode), 16M8G7D (for 802.11g mod), 17M6G7D (for Designator 802.11n20 mode),37M0G7D (for 802.11n40 mode) TX Power Control Supported, Not Supported Standby Mode Supported, Not Supported Equipment Type Stand-alone equipment, Plug-in radio device, Combined equipment Antenna Description Isotropic Antenna Type Integral External Dedicated Ports Ant 1, Ant 2, Ant 3 Smart System SISO (for 802.11b/g/n), CDD (for 802.11g), 2 Tx & 2 Rx, MIMO (for 802.11n), 2 Tx & 2 Rx, Diversity (for 802.11b/g) : Tx & Rx Gain Ant 1: -1.4 dBi (per antenna port, max.) Ant 2: -5.2 dBi (per antenna port, max.) Remark When the EUT is put into service, the practical maximum antenna gain should NOT exceed the value as described above. Report No.: Huawei Proprietary and Confidential Page 12 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public Characteristics Description Power Supply Type External DC mains, Battery, AC/DC Adapter, Powered over Ethernet (PoE). Other Report No.: Huawei Proprietary and Confidential Page 13 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public 5 General Test Conditions / Configurations 5.1 Test Modes NOTE: Worst cases for each IEEE 802.11 mode are selected to perform tests. Test Mode Test Modes Description 11B IEEE 802.11b with data rate of 1 Mbps using SISO mode. 11G IEEE 802.11g with data rate of 6 Mbps using SISO mode. 11G CDD IEEE 802.11g with data rate of 6 Mbps using CDD mode. 11N20 IEEE 802.11n with data date of MCS0 and bandwidth of 20 MHz using SISO mode. 11N20m IEEE 802.11n with data date of MCS8 and bandwidth of 20 MHz using MIMO mode. 11N40 IEEE 802.11n with data date of MCS0 and bandwidth of 40 MHz using SISO mode. 11N40m IEEE 802.11n with data date of MCS8 and bandwidth of 40 MHz using MIMO mode. 5.2 EUT Configurations 5.2.1 General Configurations Configuration Description Test Antenna Ports Until otherwise specified, - All TX tests are performed at all TX antenna ports of the EUT, and - All RX tests are performed at all RX antenna ports of the EUT. Multiple RF Sources Other than the tested RF source of the EUT, other RF source(s) are disabled or shutdown during measurements. 5.2.2 Customized Configurations Test Mode Antenna Port Power Conf., Duty cycle [%] Ant 1 16.5 99.92 11B Ant 2 15.5 99.94 CH1/2: 10 99.19 CH10: 8.5 Ant 1 CH11: 7 Others:16.5 11G CH1/2: 10 99.38 CH10: 8.5 Ant 2 CH11: 7 Others:15.5 ANT1+ANT2 Total 99.15 11G_CDD Ant 1 CH1/2: 13 Report No.: Huawei Proprietary and Confidential Page 14 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public CH10: 11.5 99.34 Ant 2 CH11: 10 Others:19 CH1/2: 10 99.12 CH10: 8.5 Ant 1 CH11: 7 Others:15.5 11N20 CH1/2: 10 99.33 CH10: 8.5 Ant 2 CH11: 7 Others:14.5 ANT1+ANT2 Total 99.19 Ant 1 CH1/2: 13 11N20M CH10: 11.5 98.62 Ant 2 CH11: 10 Others:18 CH3/8: 5.5 98.23 CH4: 7 Ant 1 CH5/6:14.0 CH7: 6.5 CH9: 5.0 11N40 CH3/8: 5.5 98.73 CH4: 7 Ant 2 CH5/6:13.0 CH7: 6.5 CH9: 5.0 ANT1+ANT2 Total 96.80 Ant 1 CH3/8: 8.5 CH4: 10 11N40M CH5/6:16.5 97.42 Ant 2 CH7: 9.5 CH9: 8.0 Report No.: Huawei Proprietary and Confidential Page 15 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public 5.3 Antenna requirements Excerpt from §15.203 of the FCC Rules/Regulations: “An intentional radiator antenna shall be designed to ensure that no antenna other than that furnished by the responsible party can be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section.” The antennas of the VOG-L29/VOG-L09 are permanently attached. There are no provisions for connection to an external antenna. Conclusion: The EUT FCC ID: QISVOG-LX9 unit complies with the requirement of §15.203. Ch. Frequency (MHz) Ch. Frequency (MHz) 01 2412 . . . . 06 2437 . . . . 11 2462 Frequency/ Channel Operations Report No.: Huawei Proprietary and Confidential Page 16 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public 5.4 Description of tests 5.4.1 Bandwidth measurement (a) Connect EUT test port to spectrum analyzer. (b) Set the EUT to transmit maximum output power at 2.4GHz, then set the measured frequency number and test the bandwidth with spectrum analyzer. 5.4.2 Average output power (a) Connect EUT test port to spectrum analyzer. (b) Set the EUT to transmit maximum output power at 2.4GHz. (c) Then set the EUT to transmit at high, middle and low frequency and measure the conducted output power separately. 5.4.3 Band edge spurious emission (a) Connect EUT test port to spectrum analyzer (b) Set the EUT to transmit maximum output power at 2.4GHz. (c) Then set the EUT to transmit at high, low frequency and measure the conducted band edge spurious separately. 5.4.4 Conducted RF spurious (a) Connect EUT test port to spectrum analyzer (b) Set the EUT to transmit maximum output power at 2.4GHz. (c) Then set the EUT to transmit at high, middle and low frequency and measure the conducted spurious separately. 5.4.5 Power spectral density (a) Connect EUT test port to spectrum analyzer (b) Set the EUT to transmit maximum output power at 2.4GHz. (c) Then set the EUT to transmit at high, middle and low frequency and measure the conducted power spectral density. 5.4.6 Radiated spurious emission & spurious in restricted band For frequency below 1GHz, the test site semi-anechoic chamber has met the requirement of NSA tolerance 4dB according to the standards: ANSI C63.10 (2013). The EUT was set-up on insulator 80cm above the Ground Plane. For frequency above 1GHz, the test site full-anechoic chamber has met the requirement of ANSI C63.10 (2013). The EUT was set-up on insulator 150cm above the Ground Plane. The set-up and test methods were according to ANSI C63.10:2013.The Radiated Disturbance measurements were made using a Rohde and Schwarz Test Receiver and control software. A preliminary scan and a final scan of the emissions were made by using test script of software; the emissions were measured using a Quasi-Peak Detector below 1GHz, Peak Detector and AV Detector above 1GHz. The maximal emission value was acquired by adjusting the antenna height, polarisation and turntable azimuth in accordance with the software setup. Normally, the height range of antenna Report No.: Huawei Proprietary and Confidential Page 17 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public was 1m to 4m,and the azimuth range of turntable was 0°to 360°. The receive antenna has two polarizations V and H. A portable or small unlicensed wireless device shall be placed on a non-metallic test fixture or other nonmetallic support during testing. The supporting fixture shall permit orientation of the EUT in each of three orthogonal (x, y, z) axis positions such that emissions from the EUT are maximized. The EUT communicates with the BTS simulator through Air interface. The EUT operated on the typical channel. Measurement bandwidth: 30 MHz – 1000 MHz: 120 kHz Measurement bandwidth: 1000 MHz – 10th Carrier Frequency: 1 MHz 5.4.7 Conducted Emission at Power Port The Table-top EUT was placed upon a non-metallic table 0.8 m above the horizontal metal reference ground plane. EUT was connected to LISN and LISN was connected to reference Ground Plane. EUT was 80cm from LISN. The set-up and test methods were according to ANSI C63.10: 2013. Conducted Disturbance at AC Port measurements were undertaken on the L and N Lines. The emissions were measured using a Quasi-Peak Detector and Average Detector. The EUT communicates with the BTS simulator through Air interface, the BTS simulator controls the Wireless Modem to transmitter the maximum power which defined in specification of product. The Wireless Modem operated on the typical channel. Measurement bandwidth (RBW) for 150kHz to 30 MHz: 9 kHz; Report No.: Huawei Proprietary and Confidential Page 18 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public 5.5 Test Setups 5.5.1 Test Setup 1 The WLAN component’s antenna ports(s) of the EUT are connected to the measurement instrument per an appropriate attenuator. The EUT is controlled by PC/software to emit the specified signals for the purpose of measurements. Jumper Cable for connecting to RF Cables (If applicable) RF Cables for testing EUT Attenuator WLAN Measurement Component Instrument WLAN component's antenna port(s) Power Control Supply PC 5.5.2 Test Setup 2 The semi-anechoic chamber and full-anechoic chamber has met the requirement of ANSI C63.4. The test distance is 3m.The setup is according to ANSI C63.4 and CAN/CSA-CEI/IEC CISPR 22. The maximal emission value is acquired by adjusting the antenna height, polarisation and turntable azimuth. Normally, the height range of antenna is 1 m to 4 m, the azimuth range of turntable is 0°to 360°, and the receive antenna has two polarizations Vertical (V) and Horizontal (H). Report No.: Huawei Proprietary and Confidential Page 19 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public (Below 1 GHz) (Above 1 GHz) Report No.: Huawei Proprietary and Confidential Page 20 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public 5.5.3 Test Setup 3 The mains cable of the EUT (maybe per AC/DC Adapter) must be connected to LISN. The LISN shall be placed 0.8 m from the boundary of EUT and bonded to a ground reference plane for LISN mounted on top of the ground reference plane. This distance is between the closest points of the LISN and the EUT. All other units of the EUT and associated equipment shall be at least 0.8m from the LISN. Ground connections, where required for safety purposes, shall be connected to the reference ground point of the LISN and, where not otherwise provided or specified by the manufacturer, shall be of same length as the mains cable and run parallel to the mains connection at a separation distance of not more than 0.1 m. Shielding room 0.4m EUT Table m 0.8 0.8m m :1 ble r ca we 1 m Po le: Receive c ab ing Power input LISN ou d Gr D≤10cm GRP Report No.: Huawei Proprietary and Confidential Page 21 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public 5.6 Test Conditions Test Case Test Conditions Configuration Description DTS (6 dB) Measurement Method FCC KDB 558074 D01 §8.2 Option 2. Bandwidth Test Environment TN/VN Test Setup Test Setup 1 EUT Configuration 11B_L@Ant1, 11B_L@Ant2, 11B_M@Ant1, 11B_M@Ant2, 11B_H@Ant1, 11B_H@Ant2, 11G_L@Ant1, 11G_L@Ant2, 11G_M@Ant1, 11G_M@Ant2, 11G_H@Ant1, 11G_H@Ant2, 11G_CDD_L@Ant1, 11G_CDD _L@Ant2, 11G_CDD _M@Ant1, 11G_CDD _M@Ant2, 11G_CDD _H@Ant1, 11G_CDD _H@Ant2, 11N20_L@Ant1, 11N20_L@Ant2, 11N20_M@Ant1, 11N20_M@Ant2, 11N20_H@Ant1, 11N20_H@Ant2, 11N20m_L@Ant1, 11N20m_L@Ant2, 11N20m_M@Ant1, 11N20m_M@Ant2, 11N20m_H@Ant1, 11N20m_H@Ant2, 11N40_L@Ant1, 11N40_L@Ant2, 11N40_M@Ant1, 11N40_M@Ant2, 11N40_H@Ant1, 11N40_H@Ant2, 11N40m_L@Ant1, 11N40m_L@Ant2, 11N40m_M@Ant1, 11N40m_M@Ant2, 11N40m_H@Ant1, 11N40m_H@Ant2, Occupied Measurement Method FCC KDB 558074 D01 §8.2 Option 2. Bandwidth Test Environment TN/VN Test Setup Test Setup 1 EUT Configuration 11B_L@Ant1, 11B_L@Ant2, 11B_M@Ant1, 11B_M@Ant2, 11B_H@Ant1, 11B_H@Ant2, 11G_L@Ant1, 11G_L@Ant2, 11G_M@Ant1, 11G_M@Ant2, 11G_H@Ant1, 11G_H@Ant2, 11G_CDD_L@Ant1, 11G_CDD _L@Ant2, 11G_CDD _M@Ant1, 11G_CDD _M@Ant2, 11G_CDD _H@Ant1, 11G_CDD _H@Ant2, 11N20_L@Ant1, 11N20_L@Ant2, 11N20_M@Ant1, 11N20_M@Ant2, 11N20_H@Ant1, 11N20_H@Ant2, 11N20m_L@Ant1, 11N20m_L@Ant2, 11N20m_M@Ant1, 11N20m_M@Ant2, 11N20m_H@Ant1, 11N20m_H@Ant2, 11N40_L@Ant1, 11N40_L@Ant2, 11N40_M@Ant1, 11N40_M@Ant2, 11N40_H@Ant1, 11N40_H@Ant2, 11N40m_L@Ant1, 11N40m_L@Ant2, 11N40m_M@Ant1, 11N40m_M@Ant2, 11N40m_H@Ant1, 11N40m_H@Ant2, Maximum Measurement Method FCC KDB 558074 D01 §8.3.2.2 Conducted Test Environment TN/VN Average Output Test Setup Test Setup 1 Power EUT Configuration 11B_L@Ant1, 11B_L@Ant2, 11B_M@Ant1, 11B_M@Ant2, Report No.: Huawei Proprietary and Confidential Page 22 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public Test Case Test Conditions Configuration Description 11B_H@Ant1, 11B_H@Ant2, 11G_L@Ant1, 11G_L@Ant2, 11G_M@Ant1, 11G_M@Ant2, 11G_H@Ant1, 11G_H@Ant2, 11G_CDD_L@Ant1, 11G_CDD _L@Ant2, 11G_CDD _M@Ant1, 11G_CDD _M@Ant2, 11G_CDD _H@Ant1, 11G_CDD _H@Ant2, 11N20_L@Ant1, 11N20_L@Ant2, 11N20_M@Ant1, 11N20_M@Ant2, 11N20_H@Ant1, 11N20_H@Ant2, 11N20m_L@Ant1, 11N20m_L@Ant2, 11N20m_M@Ant1, 11N20m_M@Ant2, 11N20m_H@Ant1, 11N20m_H@Ant2, 11N40_L@Ant1, 11N40_L@Ant2, 11N40_M@Ant1, 11N40_M@Ant2, 11N40_H@Ant1, 11N40_H@Ant2, 11N40m_L@Ant1, 11N40m_L@Ant2, 11N40m_M@Ant1, 11N40m_M@Ant2, 11N40m_H@Ant1, 11N40m_H@Ant2, Maximum Power Measurement Method FCC KDB 558074 D01 §8.4 Spectral Density Test Environment TN/VN Level Test Setup Test Setup 1 EUT Configuration 11B_L@Ant1, 11B_L@Ant2, 11B_M@Ant1, 11B_M@Ant2, 11B_H@Ant1, 11B_H@Ant2, 11G_L@Ant1, 11G_L@Ant2, 11G_M@Ant1, 11G_M@Ant2, 11G_H@Ant1, 11G_H@Ant2, 11G_CDD_L@Ant1, 11G_CDD _L@Ant2, 11G_CDD _M@Ant1, 11G_CDD _M@Ant2, 11G_CDD _H@Ant1, 11G_CDD _H@Ant2, 11N20_L@Ant1, 11N20_L@Ant2, 11N20_M@Ant1, 11N20_M@Ant2, 11N20_H@Ant1, 11N20_H@Ant2, 11N20m_L@Ant1, 11N20m_L@Ant2, 11N20m_M@Ant1, 11N20m_M@Ant2, 11N20m_H@Ant1, 11N20m_H@Ant2, 11N40_L@Ant1, 11N40_L@Ant2, 11N40_M@Ant1, 11N40_M@Ant2, 11N40_H@Ant1, 11N40_H@Ant2, 11N40m_L@Ant1, 11N40m_L@Ant2, 11N40m_M@Ant1, 11N40m_M@Ant2, 11N40m_H@Ant1, 11N40m_H@Ant2, Band Edges Measurement Method FCC KDB 558074 D01 §8.7 Compliance Test Environment TN/VN Test Setup Test Setup 1 EUT Configuration 11B_L@Ant1, 11B_L@Ant2, 11B_H@Ant1, 11B_H@Ant2, 11G_L@Ant1, 11G_L@Ant2, 11G_H@Ant1, 11G_H@Ant2, 11G_CDD_L@Ant1, 11G_CDD _L@Ant2, 11G_CDD _H@Ant1, 11G_CDD _H@Ant2, 11N20_L@Ant1, 11N20_L@Ant2, 11N20_H@Ant1, 11N20_H@Ant2, 11N20m_L@Ant1,11N20m_L@Ant2,11N20m_H@Ant1,11N20m_H@A nt2, 11N40_L@Ant1, 11N40_L@Ant2, 11N40_H@Ant1, 11N40_H@Ant2, Report No.: Huawei Proprietary and Confidential Page 23 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public Test Case Test Conditions Configuration Description 11N40m_L@Ant1,11N40m_L@Ant2,11N40m_H@Ant1,11N40m_H@A nt2, Unwanted Measurement Method FCC KDB 558074 D01 §8.5 Emissions into Test Environment TN/VN Non-Restricted Test Setup Test Setup 1 Frequency Bands EUT Configuration 11B_L@Ant1, 11B_L@Ant2, 11B_M@Ant1, 11B_M@Ant2, 11B_H@Ant1, 11B_H@Ant2, 11G_L@Ant1, 11G_L@Ant2, 11G_M@Ant1, 11G_M@Ant2, 11G_H@Ant1, 11G_H@Ant2, 11G_CDD_L@Ant1, 11G_CDD _L@Ant2, 11G_CDD _M@Ant1, 11G_CDD _M@Ant2, 11G_CDD _H@Ant1, 11G_CDD _H@Ant2, 11N20_L@Ant1, 11N20_L@Ant2, 11N20_M@Ant1, 11N20_M@Ant2, 11N20_H@Ant1, 11N20_H@Ant2, 11N20m_L@Ant1, 11N20m_L@Ant2, 11N20m_M@Ant1, 11N20m_M@Ant2, 11N20m_H@Ant1, 11N20m_H@Ant2, 11N40_L@Ant1, 11N40_L@Ant2, 11N40_M@Ant1, 11N40_M@Ant2, 11N40_H@Ant1, 11N40_H@Ant2, 11N40m_L@Ant1, 11N40m_L@Ant2, 11N40m_M@Ant1, 11N40m_M@Ant2, 11N40m_H@Ant1, 11N40m_H@Ant2, Unwanted Measurement Method ANSI C63.10; FCC KDB 558074 D01 §8.6, Radiated Emissions into Test Environment TN/VN Restricted Test Setup Test Setup 2 Frequency Bands EUT Placement Flatwise, Upright, Hung (Radiated) EUT Configuration (1) 30 MHz to 1 GHz: 11B_L@Ant1 (Worst Conf.). (2) 1 GHz to 3 GHz: 11B_L@Ant1, 11B_L@Ant2, 11B_H@Ant1, 11B_H@Ant2, 11G_L@Ant1, 11G_L@Ant2, 11G_H@Ant1, 11G_H@Ant2, 11G_CDD_L@Ant1, 11G_CDD _L@Ant2, 11G_CDD _H@Ant1, 11G_CDD _H@Ant2, 11N20_L@Ant1, 11N20_L@Ant2, 11N20_H@Ant1, 11N20_H@Ant2, 11N20m_L@Ant1,11N20m_L@Ant2,11N20m_H@Ant1,11N20m_H@A nt2 11N40_L@Ant1, 11N40_L@Ant2, 11N40_H@Ant1, 11N40_H@Ant2, 11N40m_L@Ant1,11N40m_L@Ant2,11N40m_H@Ant1,11N40m_H@A nt2, (3) 3 GHz to 18 GHz: 11B_L@Ant1 (Worse Conf.), 11B_H@Ant1 (Worse Conf.). (4) 18 GHz to 26.5 GHz: 11B_L@Ant1 (Worse Conf.), 11B_H@Ant1 (Worse Conf.). AC Power Line Measurement Method AC mains conducted. Report No.: Huawei Proprietary and Confidential Page 24 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public Test Case Test Conditions Configuration Description Conducted Test Environment TN/VN Emissions Test Setup Test Setup 3 EUT Configuration 11B_L@Ant1 (Worst Conf.). Report No.: Huawei Proprietary and Confidential Page 25 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public 5.7 Main Instruments This table gives a complete overview of the RF measurement equipment. Devices used during the test described are marked Main Test Equipment(BT/WIFI test system) Marked Equipment Name Manufacturer Model Serial Number Cal Date Cal-Due JS1120-3 BT/WIFI test JS Tonscend JS0806-2 188060102 2018/05/30 2019/05/30 system Power Detecting & R&S OSP-B157 101429 2018/07/23 2019/07/23 Samplig Unit Power Sensor R&S NRP2 103085/106211 2018/05/17 2019/05/17 DC Power Supply KEITHLEY 2303 1342889 2018/10/24 2019/10/24 DC Power Supply KEITHLEY 2303 000500E 2018/05/21 2019/05/21 DC Power Supply KEITHLEY 2303 1288003 2017/12/21 2018/12/21 DC Power Supply KEITHLEY 2303 000381E 2018/05/21 2019/05/21 DC Power Supply KEITHLEY 2303 000510E 2018/05/21 2019/05/21 DC Power Supply KEITHLEY 2303 1342896 2018/10/24 2019/10/24 5624600294001 Temperature Chamber WEISS WKL64 2018/10/24 2019/10/24 0 Spectrum Analyzer Agilent N9030A MY51380032 2018/07/23 2019/07/23 Spectrum Analyzer Agilent N9030A MY49431698 2018/07/23 2019/07/23 Spectrum Analyzer Keysight N9040B MY57212529 2018/06/28 2019/06/28 Signal Analyzer R&S FSQ31 200021 2018/07/23 2019/07/23 Signal Analyzer R&S FSU26 201069 2018/11/2 2019/11/2 Universal Radio R&S CMW500 164699 2018/03/15 2019/03/15 Communication Tester Universal Radio R&S CMW500 159302 2018/07/23 2019/07/23 Communication Tester Wireless Agilent N4010A MY49081592 2018/07/23 2019/07/23 Communication Test set Signal generator Agilent E8257D MY51500314 2018/04/27 2019/04/27 Signal generator Agilent E8257D MY49281095 2018/07/23 2019/07/23 Vector Signal Generator R&S SMW200A 103447 2018/05/31 2019/05/31 Vector Signal Generator R&S SMU200A 104162 2018/07/23 2019/07/23 Main Test Equipment( RE test system) Marked Equipment Name Manufacturer Model Serial Number Cal Date Cal-Due Test receiver R&S ESU26 100387 2019/01/15 2020/01/14 LOOP R&S HFH2-Z2 100262 2017/04/25 2019/04/25 Antennas(9kHz-30MHz) LOOP R&S HFH2-Z2 100263 2017/04/25 2019/04/25 Report No.: Huawei Proprietary and Confidential Page 26 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public Antennas(9kHz-30MHz) Trilog Broadband SCHWARZBE VULB 9163 9163-357 2017/04/21 2019/04/20 Antenna (30M~3GHz) CK Trilog Broadband SCHWARZBE VULB 9163 9163-520 2017/3/29 2019/3/28 Antenna (30M~3GHz) CK Trilog Broadband SCHWARZBE VULB 9163 9163-491 2017/3/29 2019/3/28 Antenna (30M~3GHz) CK Trilog Broadband SCHWARZBE VULB 9163 9163-356 2018/4/9 2020/4/8 Antenna (30M~3GHz) CK Double-Ridged Waveguide Horn R&S HF907 100305 2017/4/21 2019/4/20 Antenna (1G~18GHz) Double-Ridged Waveguide Horn R&S HF906 100684 2017/5/27 2019/5/26 Antenna (1G~18GHz) Double-Ridged Waveguide Horn R&S HF906 100683 2017/3/29 2019/3/28 Antenna (1G~18GHz) Pyramidal Horn Antenna(18GHz-26.5G ETS-Lindgren 3160-09 5140299 2017/07/20 2019/07/19 Hz) Pyramidal Horn Antenna(18GHz-26.5G ETS-Lindgren 3160-09 00206665 2018/4/21 2020/4/20 Hz) Pyramidal Horn Antenna(26.5GHz-40G ETS-Lindgren 3160-10 00205695 2018/04/20 2020/04/19 Hz) Pyramidal Horn Antenna(26.5GHz-40G ETS-Lindgren 3160-10 LM5947 2017/07/20 2019/07/19 Hz) Measurement Software R&S EMC32 V9.25.0 / / / Main Test Equipment( CE test system) Marked Equipment Name Manufacturer Model Serial Number Cal Date Cal-Due Test receiver R&S ESU26 100387 2019/01/15 2020/01/14 Test receiver R&S ESCI 101163 2019/01/15 2020/01/14 Artificial Main Network R&S ENV4200 100134 2018/05/08 2019/05/07 Line Impedance R&S ENV216 100382 2018/05/08 2019/05/07 Stabilization Network Measurement Software R&S EMC32 V9.25.0 / / / Report No.: Huawei Proprietary and Confidential Page 27 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002

RF Report for VOG-L29/VOG-L09 Public 6 Measurement Uncertainty For a 95% confidence level (k = 2), the measurement expanded uncertainties for defined systems, in accordance with the recommendations of ISO 17025 as following: Test Item Extended Uncertainty Transmit Output Power Data Power [dBm] U = 0.39 dB RF Power Density, Conducted Power [dBm] U = 0.64 dB Bandwidth Magnitude [kHz] 20MHz: U=41.78kHz 40MHz: U=82.12kHz Band Edge Compliance Disturbance Power [dBm] U = 0.9 dB Spurious Emissions, Conducted Disturbance Power [dBm] 20MHz~3.6GHz：U＝0.88dB 3.6GHz~8.4GHz：U＝1.08dB 8.4GHz~13.6GHz：U＝1.24dB 13.6GHz~22GHz：U＝1.34dB 22GHz~26.5GHz：U＝1.36dB Field Strength of Spurious ERP/EIRP [dBm] For 3 m Chamber: Radiation U = 5.90 dB (30 MHz-1 GHz) U = 4.94 dB (1 GHz-18 GHz) U = 4.24 dB (18 GHz-26.5 GHz) Frequency Stability Frequency Accuracy [Hz] U=41.58Hz AC Power Line Conducted Disturbance Voltage[dBμV] U=2.3 dB Emissions Duty Cycle Duty Cycle [%] U=±2.06 % END Report No.: Huawei Proprietary and Confidential Page 28 of 28 SYBH(Z-RF)2018122401400 Copyright © Huawei Technologies Co., Ltd. 2-2002


Document Created: 2019-01-31 15:29:58
Document Modified: 2019-01-31 15:29:58
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC