Test Report_NII_Part 1

FCC ID: QISVOG-LX9

Test Report

Download: PDF
FCCID_4178752

FCC RF Test Report Product Name: Smart Phone Model Number: VOG-L29/VOG-L09 Report No.: SYBH(Z-RF)20181224014002-2005 FCC ID：QISVOG-LX9 APPROVED PREPARED Authorized (Lab Manager) (Test Engineer) BY DATE 2019-01-28 2019-01-28 Reliability Laboratory of Huawei Technologies Co., Ltd. (Global Compliance and Testing Center of Huawei Technologies Co., Ltd) No.2, New City Avenue, Songshan Lake Sci. & Tech. Industry Park, Dongguan, 523808, P.R.C Telephone: +86 769 23830808 Fax: +86 769 23837628

RF Report for VOG-L29/VOG-L09 Public ※ ※ Notice ※ ※ 1. The laboratory has passed the accreditation by The American Association for Laboratory Accreditation (A2LA). The accreditation number is 2174.01. 2. The laboratory has been recognized by the US Federal Communications Commission (FCC) to perform compliance testing subject to the Commission's Certification rules. The Designation Number is CN1173, and the Test Firm Registration Number is 294140. 3. The laboratory has been recognized by the Innovation, Science and Economic Development Canada (ISED) to test to Canadian radio equipment requirements. The CAB identifier is CN0003, an d the ISED# is 21741. 4. The laboratory (Reliability Lab of Huawei Technologies Co., Ltd) is also named “Global Compliance and Testing Center of Huawei Technologies Co., Ltd”, the both names have coexisted since 2009. 5. The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. 6. The test report is invalid if there is any evidence of erasure and/or falsification. 7. The test report is only valid for the test samples. 8. Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without prior written approval from the laboratory. 9. If any question about this report, please contact the laboratory (PublicGCTC@huawei.com). Report No.: Huawei Proprietary and Confidential Page 2 of 23 SYBH(Z-RF)20181224014002-2 Copyright © Huawei Technologies Co., Ltd. 005

RF Report for VOG-L29/VOG-L09 Public MODIFICATION RECORD No. Report No Modification Description 1 SYBH(Z-RF)2018122 First release. 4014002-2005 DECLARATION Type Description Multiple The present report applies to single model. Models The present report applies to several models. The practical measurements are Applications performed with the model VOG-L29. These models utilize the similar radio design, shielding, interface, physical layout and so on. The differences and modifications between these models are declared by the applicant and showed in General Description All others between these models are identical. The present report only presents the worst test case of all modes, see relevant test results for detailed. Report No.: Huawei Proprietary and Confidential Page 3 of 23 SYBH(Z-RF)20181224014002-2 Copyright © Huawei Technologies Co., Ltd. 005

RF Report for VOG-L29/VOG-L09 Public 1 Table of contents 1 Table of contents .................................................................................................................................................... 4 2 General Information ................................................................................................................................................ 5 2.1 Test standard/s ......................................................................................................................................... 5 2.2 Test Environment ...................................................................................................................................... 5 2.3 Test Laboratories ...................................................................................................................................... 6 2.4 Applicant and Manufacturer ...................................................................................................................... 6 2.5 Application details ..................................................................................................................................... 6 3 Test Summary ........................................................................................................................................................ 7 3.1 Measurement Technical Requirements ..................................................................................................... 7 4 Description of the Equipment under Test (EUT) ..................................................................................................... 9 4.1 General Description .................................................................................................................................. 9 4.2 EUT Identity ............................................................................................................................................ 12 4.3 Technical Description .............................................................................................................................. 13 5 General Test Conditions / Configurations ............................................................................................................. 15 5.1 Test Modes ............................................................................................................................................. 15 5.2 EUT Configurations ................................................................................................................................. 15 5.3 Test Setups ............................................................................................................................................. 18 5.4 Test Conditions ....................................................................................................................................... 21 6 Main Test Instruments .......................................................................................................................................... 22 7 Measurement Uncertainty..................................................................................................................................... 23 Report No.: Huawei Proprietary and Confidential Page 4 of 23 SYBH(Z-RF)20181224014002-2 Copyright © Huawei Technologies Co., Ltd. 005

RF Report for VOG-L29/VOG-L09 Public 2 General Information 2.1 Test standard/s 47 CFR FCC Part 2, Subpart J Applied Rules : 47 CFR FCC Part 15, Subpart C 47 CFR FCC Part 15, Subpart E FCC KDB 789033 D02 General UNII Test Procedures New Rules v02 FCC KDB 558074 D01 DTS Meas Guidance v04 Test Method : FCC KDB 662911 D01 Multiple Transmitter Output v02r01 ANSI C63.10-2013, American National Standard for Testing Unlicensed Wireless Devices 2.2 Test Environment Temperature : TN 15 to 30 °C during room temperature tests Ambient Relative Humidity: 20 to 85 % Atmospheric Pressure: Not applicable VL 3.6 V Power supply : VN 3.82 V DC by Battery VH 4.35 V NOTE 1: 1) VN= nominal voltage, VL= low extreme test voltage, VH= High extreme test voltage; TN= normal temperature, TL= low extreme test temperature, TH= High extreme test temperature. NOTE 2: The values used in the test report may be stringent than the declared. Report No.: Huawei Proprietary and Confidential Page 5 of 23 SYBH(Z-RF)20181224014002-2 Copyright © Huawei Technologies Co., Ltd. 005

RF Report for VOG-L29/VOG-L09 Public 2.3 Test Laboratories RELIABILITY LABORATORY OF HUAWEI TECHNOLOGIES CO., Test Location 1 : LTD. No.2, New City Avenue, Songshan Lake Sci. & Tech. Industry Park, Address of Test Location 1 : Dongguan, 523808, P.R.C 2.4 Applicant and Manufacturer Company Name : HUAWEI TECHNOLOGIES CO., LTD Administration Building, Headquarters of Huawei Technologies Co., Ltd., Address : Bantian, Longgang District, Shenzhen, 518129, P.R.C 2.5 Application details Date of Receipt Sample: 2019-01-02 Start of test: 2019-01-03 End of test: 2019-01-28 Report No.: Huawei Proprietary and Confidential Page 6 of 23 SYBH(Z-RF)20181224014002-2 Copyright © Huawei Technologies Co., Ltd. 005

RF Report for VOG-L29/VOG-L09 Public 3 Test Summary 3.1 Measurement Technical Requirements 3.1.1 U-NII (5150-5250, 5250-5350, 5470-5725 MHz, 5725-5850) FCC Rule Test Item Band Requirements Test Result Verdict No. 15.403(i) 5150-5250 15.407(a)(1) 15.403(i) 5250-5350 No limit. Emission 15.407(a)(2) Refer to No. Pass Bandwidth 15.403(i) SYBH(Z-RF)20181218028001-2005 5470-5725 15.407(a)(2) 15.403(i) 5725-5850 ≥ 500 kHz. 15.407(e) 5150-5250 5250-5350 KDB Occupied Refer to No. 789033 D02 No limit. Pass Bandwidth SYBH(Z-RF)20181218028001-2005 5470-5725 §D 5725-5850 KDB Refer to No. Duty Cycle 5150-5850 789033 D02 No limit. SYBH(Z-RF)20181218028001-2005 §B FCC: 15.407(a)(1) conducted 5150-5250 15.407(a)(4) < 250mW (avg during transmission) FCC: conducted 15.407(a)(2) 5250-5350 <MIN{250mW,11dBm+10*lg(EBW)} Pass Maximum 15.407(a)(4) (avg during transmission) Refer to No. Output FCC: SYBH(Z-RF)20181218028001-2005 Power 15.407(a)(2) conducted 5470-5725 15.407(a)(4) <MIN{250mW,11dBm+10*lg(EBW)} (avg during transmission) conducted 5725-5850 15.407(a)(3) < 1W (avg during transmission) Report No.: Huawei Proprietary and Confidential Page 7 of 23 SYBH(Z-RF)20181224014002-2 Copyright © Huawei Technologies Co., Ltd. 005

RF Report for VOG-L29/VOG-L09 Public FCC Rule Test Item Band Requirements Test Result Verdict No. FCC 15.407(a)(1) conducted 5150-5250 15.407(a)(4) <11dBm/MHz (avg during transmission) conducted maximum 15.407(a)(2) 5250-5350 <11dBm/MHz Power 15.407(a)(4) Refer to No. (avg during transmission) Spectral SYBH(Z-RF)20181218028001-2005 conducted Density 15.407(a)(2) 5470-5725 <11dBm/MHz 15.407(a)(4) (avg during transmission) conducted 15.407(a)(3) 5725-5850 <30dBm/500KHz 15.407(a)(4) (avg during transmission) 5150-5250 Frequency 5250-5350 Refer to No. 15.407(g) FCC Part 15.407(g) Pass Stability 5470-5725 SYBH(Z-RF)20181218028001-2005 5725-5850 Note1: The transmitter has an integral PCB loop antenna that is enclosed within the housing of the EUT and meets the requirements of FCC 15.203 Note2: We do not test 5G WIFI of VOG-L29/VOG-L09, all test data can refer to No. SYBH(Z-RF)20181218028001-2005 of VOG-L04(FCC ID:QISVOG-L04). Report No.: Huawei Proprietary and Confidential Page 8 of 23 SYBH(Z-RF)20181224014002-2 Copyright © Huawei Technologies Co., Ltd. 005

RF Report for VOG-L29/VOG-L09 Public 4 Description of the Equipment under Test (EUT) 4.1 General Description VOG-L29 is a subscriber equipment in the GSM/WCDMA/LTE system. The GSM frequency band includes GSM850 and GSM900 and DCS1800 and PCS1900.The UMTS frequency band is B1 and B2 and B4 and B5 and B6 and B8 and B19. The LTE frequency band is B1 and B2 and B3 and B4 and B5 and B6 and B7 and B8 and B9 and B12 and B17and B18 and B19 and B20 and B26 and B28 and B32 and B34 and B38 and B39 and B40 and B41. The Mobile Phone implements such functions as RF signal receiving/transmitting, LTE/HSPA/UMTS and GSM/GPRS/EDGE protocol processing, voice, video MMS service, GPS, Bluetooth, NFC, Wi-Fi and Wirelessly Charging etc. VOG-L29 is a dual SIM smart phone, and one of the SIM card interfaces could be used as Nano memory card interface. Externally it provides type C USB charging port, and the port could be used as the earphone port or data-transfer port. VOG-L09 is a subscriber equipment in the GSM/WCDMA/LTE system. The GSM frequency band includes GSM850 and GSM900 and DCS1800 and PCS1900.The UMTS frequency band is B1 and B2 and B4 and B5 and B6 and B8 and B19. The LTE frequency band is B1 and B2 and B3 and B4 and B5 and B6 and B7 and B8 and B9 and B12 and B17and B18 and B19 and B20 and B26 and B28 and B32 and B34 and B38 and B39 and B40 and B41. The Mobile Phone implements such functions as RF signal receiving/transmitting, LTE/HSPA/UMTS and GSM/GPRS/EDGE protocol processing, voice, video MMS service, GPS, Bluetooth, NFC, Wi-Fi and Wirelessly Charging etc. VOG-L09 provides one SIM card interface and one Nano memory card interface. Externally it provides type C USB charging port, and the port could be used as the earphone port or data-transfer port. The difference between VOG-L29 and VOG-L09 The only difference between VOG-L29 and VOG-L09 is that VOG-L09 deletes into single SIM card by software. Other parts of the two models are the same. The difference between VOG-L29 and VOG-L04 is show in the below table. Model VOG-L29 VOG-L04 PCB The same The same Frequency-G The same The same SM Frequency-W The same The same CDMA Report No.: Huawei Proprietary and Confidential Page 9 of 23 SYBH(Z-RF)20181224014002-2 Copyright © Huawei Technologies Co., Ltd. 005

RF Report for VOG-L29/VOG-L09 Public The same Different Frequency-LT Support B32 Support B66 E Unsupport B66 Unsupport B32 The same Different 4*4 Mimo Support B1、B3、B7 Support B2、B4、B7、B66 SIM Card Dual Single Support B32 Location ID: SAW filter:Z3401,Z4104, B32 Diplexer:Z3402,Z5403 B32 RF RF low noise amplifier:U3405,U4103 Unsupport B32 circuit Capacitor:C3422,C3423,C3425,C3442,C2912,C3 Delete components related to the B32 RF circuit. 411,L3533,L4416,C3418,C4102 Inductor:L3412,L3422,L3413,L3408,L4124,L4137, L4139,L4140 Function Description:B32 main RF circuit and Har diversity RF circuit dwa Support B1/3/7 4*4MIMO and delete/replace Support B2/7/66(4) 4*4MIMO and delete/replace re components related circuit; components related circuit; Location ID: 4*4 Location ID: B1/3/7 MIMO(t B2/7/66(4) SAW filter: SAW filter of the 4th antenna :Z4403 he 3rd SAW filter of the 4th antenna :Z4403 (Vendor:KYOCERA type:SF18-1842M8SUA3) & 4th (Vendor:MURATA type:SATEY1G96AU3F0AR00) SAW filter of the 3rd antenna :Z4301 antenn SAW filter of the 3rd antenna :Z4301 (Vendor:KYOCERA type:SF18-1842M8SUA3) a) (Vendor:MURATA type:SATEY1G96AU3F0AR00) Capacitor:L5507,C5401,C5402,C5517,C3411,L35 Inductor:L4419,L4412,L4416,C5444,C5407,L5510 33,L4416 Function Description:B2/7/66(4) 4*4MIMO RF Inductor:L5510,L4330,L5415,L3408,L4419 circuit Function Description: B1/3/7 4*4MIMO RF circuit Report No.: Huawei Proprietary and Confidential Page 10 of 23 SYBH(Z-RF)20181224014002-2 Copyright © Huawei Technologies Co., Ltd. 005

RF Report for VOG-L29/VOG-L09 Public Unsupport CA_1-3-32 and delete/replace Unsupport B66 and delete/replace components components related circuit; related circuit; Support B66 &Support CA_2-66 Support CA_1-3-32 B1/B3/ Location ID: Location ID: B32 & B2/B7/B66(4) diversity TRI SAW filter:Z4105 B1/B3 Quadruplexer:Z3502(Vendor:QORVO, B2/B66 (Vendor:MURATA type:SATEY1G96AU3F0AR00) type:QM25002TR13-5KHW) RF B2/B66(B4) Quadruplexer:Z3502( Capacitor:C3533 &CA Vendor:KYOCERA type:SQ25-1745K6SUA4) B2 SAW filter: Z4101(Vendor:MURATA ect. circuit Capacitor:C3401,C3402,C3504,L4110 type:SAFFB1G96AB0F0AR1X ect. ) Inductor:L3532,L4111,L4112,L4107,L4109,L4114,L L4123,L4122,L3523,L3532,C3520,L3512,L4419 4108,L4118,C3520,L3533,L3512 Function Description:B2 RX and CA_1-3-32 Function Description:B2/B66 Single-band and CA diplexer RF circuit main and diversity RF circuits B7 receiving matching circuit is adjusted to include: B7 receive matching circuit include: B7 RX Inductor:C4101 circuit Inductor:L4127,L4126 B7 diversity TRI SAW filter:Z4105(Vendor:MURATA type:SATEY1G96AU3F0AR00) Software Different Different Dimensions The same The same Appearance The same The same main antenna The same The same DIV antenna The same The same BT/Wi-Fi The same The same antenna MIMO The same The same antenna NFC The same The same WPC The same The same Supported CA configuration Different Different s for DL CA Supported CA configuration The same The same s for UL CA Others NA NA Note1: Only 5G WIFI test data included in this report Note2: We do not test 5G WIFI of VOG-L29/VOG-L09, all test data can refer to No. SYBH(Z-RF)20181218028001-2005 of VOG-L04(FCC ID:QISVOG-L04). Report No.: Huawei Proprietary and Confidential Page 11 of 23 SYBH(Z-RF)20181224014002-2 Copyright © Huawei Technologies Co., Ltd. 005

RF Report for VOG-L29/VOG-L09 Public 4.2 EUT Identity NOTE: Unless otherwise noted in the report, the functional boards installed in the units shall be selected from the below list, but not means all the functional boards listed below shall be installed in one unit. 4.2.1 Board Board Description Software Version Hardware Version Main Board 9.1.0.84(C432E84R1P1) HL2VOGUEM 4.2.2 Sub-Assembly Sub-Assembly Sub-Assembly Model Manufacturer Description Name Huawei Input voltage: 100-240V ~50/60Hz 1.2A Adapter HW-100400A00 Technologies Output voltage: 5V 2A OR 9V 2A Co., Ltd. OR 10V 4A Huawei Input voltage: 100-240V ~50/60Hz 1.2A Adapter HW-100400U00 Technologies Output voltage: 5V 2A OR 9V 2A Co., Ltd. OR 10V 4A Huawei Input voltage: 100-240V ~50/60Hz 1.2A Adapter HW-100400E00 Technologies Output voltage: 5V 2A OR 9V 2A Co., Ltd. OR 10V 4A Huawei Input voltage: 100-240V ~50/60Hz 1.2A Adapter HW-100400B00 Technologies Output voltage: 5V 2A OR 9V 2A Co., Ltd. OR 10V 4A Rated capacity: 4100mAh Huawei Nominal Voltage: +3.82V Battery HB486486ECW Technologies Co., Ltd. Charging Voltage: +4.4V Report No.: Huawei Proprietary and Confidential Page 12 of 23 SYBH(Z-RF)20181224014002-2 Copyright © Huawei Technologies Co., Ltd. 005

RF Report for VOG-L29/VOG-L09 Public 4.3 Technical Description Characteristics Description IEEE 802.11 802.11a (20 MHz channel bandwidth) , 802.11n (20 MHz channel bandwidth), WLAN Mode 802.11n (40 MHz channel bandwidth), 802.11ac (20 MHz channel Supported bandwidth), 802.11ac (40 MHz channel bandwidth), 802.11ac (80 MHz channel bandwidth), 802.11ac (160 MHz channel bandwidth) TX/RX Operating All fc = 5000 MHz + N * 5 MHz, where: Range - fc = “Operating Frequency” in MHz, - N = “Channel Number”. 5150-5250 N = 36 to 48 with step of 4 for the 20 MHz channel bandwidth. MHz (U-NII) N = 38 to 46 with step of 8 for the 40 MHz channel bandwidth. N = 42 for the 80 MHz channel bandwidth. N = 50 for the 160 MHz channel bandwidth 5250-5350 N = 52 to 64 with step of 4 for the 20 MHz channel bandwidth. MHz (U-NII) N = 54 to 62 with step of 8 for the 40 MHz channel bandwidth. N = 58 for the 80 MHz channel bandwidth. 5470-5650 N = 100 to 128 with step of 4 for the 20 MHz channel bandwidth. MHz (U-NII) N = 102 to 126 with step of 8 for the 40 MHz channel bandwidth. (for FCC) N = 106 to 122 with step of 16 for the 80 MHz channel bandwidth. N = 114 for the 160 MHz channel bandwidth. 5650-5725 N = 132 to 140 with step of 4 for the 20 MHz channel bandwidth. MHz (U-NII) N = 134 to 134 with step of 8 for the 40 MHz channel bandwidth. 5725-5850MH N = 149 to 165 with step of 4 for the 20 MHz channel bandwidth. z(U-NII) N = 151 to 159 with step of 8 for the 40 MHz channel bandwidth. N = 155 for the 80 MHz channel bandwidth. Modulation Type 802.11a: BPSK/QPSK/16QAM/64QAM (OFDM). 802.11n: BPSK/QPSK/16QAM/64QAM (OFDM). 802.11ac: BPSK/QPSK/16QAM/64QAM/256QAM (OFDM). Emission 17M1G7D (for 802.11a mod), Designator U-NII(5150-52 18M0G7D (for 802.11n 20 MHz mode), 50, 5250-5350, 36M6G7D (for 802.11n 40 MHz mode), 5470-5725, 18M0G7D (for 802.11ac 20 MHz mode) 5725-5850) 36M6G7D (for 802.11ac 40 MHz mode) 75M6G7D (for 802.11ac 80 MHz mode) 156MG7D (for 802.11ac 160 MHz mode) TX Power Control Supported, Not Supported (TPC) Equipment Type Stand-alone equipment, Plug-in radio device, Combined equipment Antenna Description Isotropic Antenna Report No.: Huawei Proprietary and Confidential Page 13 of 23 SYBH(Z-RF)20181224014002-2 Copyright © Huawei Technologies Co., Ltd. 005

RF Report for VOG-L29/VOG-L09 Public Characteristics Description Type Integral External Dedicated Ports Ant 1, Ant 2, Ant 3, Ant 4 Smart System SISO (for 802.11a/n/ac), CDD (for 802.11a), 2 Tx & 2 Rx, MIMO (for 802.11a/ac), 2 Tx & 2 Rx, Diversity (for 802.11a/n/ac) : Tx & Rx Gain Ant 1: -2.9 dBi (per antenna port, max.) Ant 2: -1.2 dBi (per antenna port, max.) Remark When the EUT is put into service, the practical maximum antenna gain should NOT exceed the value as described above. Power Supply Type External DC mains, Battery, AC/DC Adapter, Powered over Ethernet (PoE). Other Report No.: Huawei Proprietary and Confidential Page 14 of 23 SYBH(Z-RF)20181224014002-2 Copyright © Huawei Technologies Co., Ltd. 005

RF Report for VOG-L29/VOG-L09 Public 5 General Test Conditions / Configurations 5.1 Test Modes NOTE: Worst cases for each IEEE 802.11 mode are selected to perform tests. Test Mode Test Modes Description 11A IEEE 802.11a with data rate of 6 Mbps using SISO mode. 11A CDD IEEE 802.11a with data rate of 6 Mbps using CDD mode. 11N20 IEEE 802.11n with data date of MCS0 and bandwidth of 20 MHz using SISO mode. 11N20m IEEE 802.11n with data date of MCS8 and bandwidth of 20 MHz using MIMO mode. 11N40 IEEE 802.11n with data date of MCS0 and bandwidth of 40 MHz using SISO mode. 11N40m IEEE 802.11n with data date of MCS8 and bandwidth of 40 MHz using MIMO mode. 11AC20 IEEE 802.11ac with data date of MCS0 and bandwidth of 20 MHz using SISO mode. 11AC20m IEEE 802.11ac with data date of MCS8 and bandwidth of 20 MHz using SISO mode. 11AC40 IEEE 802.11ac with data date of MCS0 and bandwidth of 40 MHz using SISO mode. 11AC40m IEEE 802.11ac with data date of MCS8 and bandwidth of 40 MHz using MIMO mode. 11AC80 IEEE 802.11ac with data date of MCS0 and bandwidth of 80 MHz using SISO mode. 11AC80m IEEE 802.11ac with data date of MCS8 and bandwidth of 80 MHz using MIMO mode. 11AC160 IEEE 802.11ac with data date of MCS0 and bandwidth of 160 MHz using SISO mode. 11AC160m IEEE 802.11ac with data date of MCS8 and bandwidth of 160 MHz using MIMO mode. 5.2 EUT Configurations 5.2.1 General Configurations Configuration Description Test Antenna Ports Until otherwise specified,  All TX tests are performed at all TX antenna ports of the EUT, and  All RX tests are performed at all RX antenna ports of the EUT. Multiple RF Sources Other than the tested RF source of the EUT, other RF source(s) are disabled or shutdown during measurements. 5.2.2 Customized Configurations Test Mode Antenna Port Power Conf., Duty cycle [%] CH36/64/100:9 99.19 CH140:9.5 Ant 1 CH165: 13.5 11A Others: 14.5 CH36/64/100:9 99.19 Ant 2 CH140:9.5 CH165: 13.5 Report No.: Huawei Proprietary and Confidential Page 15 of 23 SYBH(Z-RF)20181224014002-2 Copyright © Huawei Technologies Co., Ltd. 005

RF Report for VOG-L29/VOG-L09 Public Others: 14 ANT1+ANT2 Total 99.19 Ant 1 CH36/64/100:12 11A CDD CH140:12.5 99.19 Ant 2 CH165: 16.5 Others: 17.3 CH36/64/100:9 99.12 CH140:9.5 Ant 1 CH165: 13.5 Others: 14.5 11N20 CH36/64/100:9 99.12 CH140:9.5 Ant 2 CH165: 13.5 Others: 14 ANT1+ANT2 Total 98.38 Ant 1 CH36/64/100:12 11N20M CH140:12.5 98.38 Ant 2 CH165: 16.5 Others: 17.3 CH38/102/134:8 98.23 CH62:7.5 Ant 1 CH159:13 Others: 14 11N40 CH38/102/134:8 98.31 CH62:7.5 Ant 2 CH159:13 Others: 13.5 ANT1+ANT2 Total 96.96 Ant 1 CH38/102/134:11 11N40M CH62:10.5 96.96 Ant 2 CH159:16 Others: 16.8 CH36/64/100:9 99.13 CH140:9.5 Ant 1 CH165: 13.5 Others: 14.5 11AC20 CH36/64/100:9 99.13 CH140:9.5 Ant 2 CH165: 13.5 Others: 14 ANT1+ANT2 Total 99.13 Ant 1 11AC20M CH36/64/100:12 Ant 2 CH140:12.5 99.13 Report No.: Huawei Proprietary and Confidential Page 16 of 23 SYBH(Z-RF)20181224014002-2 Copyright © Huawei Technologies Co., Ltd. 005

RF Report for VOG-L29/VOG-L09 Public CH165: 16.5 Others: 17.3 CH38/102/134:8 98.24 CH62:7.5 Ant 1 CH159:13 Others: 14 11AC40 CH38/102/134:8 98.24 CH62:7.5 Ant 2 CH159:13 Others: 13.5 ANT1+ANT2 Total 98.4 Ant 1 CH38/102/134:11 11AC40M CH62:10.5 98.4 Ant 2 CH159:16 Others: 16.8 CH155: 10 96.9 Ant 1 Others: 5 11AC80 CH155: 10 96.9 Ant 2 Others: 5 Ant 1 ANT1+ANT2 Total 96.9 11AC80M CH155: 13 Ant 2 96.9 Others: 8 Ant 1 5 94.36 11AC160 Ant 2 5 94.36 Ant 1 ANT1+ANT2 Total 94.36 11AC160M Ant 2 8 94.36 Report No.: Huawei Proprietary and Confidential Page 17 of 23 SYBH(Z-RF)20181224014002-2 Copyright © Huawei Technologies Co., Ltd. 005

RF Report for VOG-L29/VOG-L09 Public 5.3 Test Setups 5.3.1 Test Setup 1 The WLAN component’s antenna ports(s) of the EUT are connected to the measurement instrument per an appropriate attenuator. The EUT is controlled by PC/software to emit the specified signals for the purpose of measurements. Jumper Cable for connecting to RF Cables (If applicable) RF Cables EUT for testing WLAN Measurement Attenuator Component Instrument WLAN component's antenna port Power Control Grounding Supply PC (only for grounded device) 5.3.2 Test Setup 2 The test site semi-anechoic chamber has met the requirement of NSA tolerance 4 dB according to the standards: ANSI C63.4. The test distance is 3 m (for 30 MHz to 26.5 GHz) or 1 m (for 26.5 GHz to 40 GHz).The setup is according to ANSI C63.10, ANSI C63.4 and CAN/CSA-CEI/IEC CISPR 22. The maximal emission value is acquired by adjusting the antenna height, polarisation and turntable azimuth. Normally, the height range of antenna is 1 m to 4 m, the azimuth range of turntable is 0°to 360°, and the receive antenna has two polarizations Vertical (V) and Horizontal (H). Report No.: Huawei Proprietary and Confidential Page 18 of 23 SYBH(Z-RF)20181224014002-2 Copyright © Huawei Technologies Co., Ltd. 005

RF Report for VOG-L29/VOG-L09 Public Semi-Anechoic Chamber MAX:4 m Antenna EUT Preamplifier MIN:1 m Signal 0.8 m cable AE Grounding GRP Receiver Ferrite Clamp (only for grounded device) (Below 1 GHz) (Above 1 GHz) Report No.: Huawei Proprietary and Confidential Page 19 of 23 SYBH(Z-RF)20181224014002-2 Copyright © Huawei Technologies Co., Ltd. 005

RF Report for VOG-L29/VOG-L09 Public 5.3.3 Test Setup 3 The mains cable of the EUT (maybe per AC/DC Adapter) must be connected to LISN. The LISN shall be placed 0.8 m from the boundary of EUT and bonded to a ground reference plane for LISN mounted on top of the ground reference plane. This distance is between the closest points of the LISN and the EUT. All other units of the EUT and associated equipment shall be at least 0.8m from the LISN. Ground connections, where required for safety purposes, shall be connected to the reference ground point of the LISN and, where not otherwise provided or specified by the manufacturer, shall be of same length as the mains cable and run parallel to the mains connection at a separation distance of not more than 0.1 m. Shielding room 0.4m EUT Table m 0.8 0.8m m :1 a b le e rc w 1m Po le : Receive c ab ded n in g o u Power input LISN ou nd or gr ) e Gr nly f evic (o d D≤10cm GRP Report No.: Huawei Proprietary and Confidential Page 20 of 23 SYBH(Z-RF)20181224014002-2 Copyright © Huawei Technologies Co., Ltd. 005

RF Report for VOG-L29/VOG-L09 Public 5.4 Test Conditions Test Case Test Conditions Configuration Description Emission Meas. Method FCC KDB 789033 D02 §C). Bandwidth Test Env. TN/VN (EBW) Test Setup Test Setup 1 EUT Conf. All EUT conf. with Tx modes. Occupied Meas. Method FCC KDB 789033 D02 §D). Bandwidth Test Env. TN/VN (OBW) Test Setup Test Setup 1 EUT Conf. All EUT conf. with Tx modes. Maximum Meas. Method FCC KDB 789033 D02 §E)2)b) Method SA-1 and d) Method SA-2. Conducted Test Env. TN/VN Output Power Test Setup Test Setup 1 EUT Conf. All EUT conf. with Tx modes. Maximum Meas. Method FCC KDB 789033 D02 §F). Power Spectral Test Env. TN/VN Density Test Setup Test Setup 1 EUT Conf. All EUT conf. with Tx modes. 15.407(g) Meas. Method Frequence Stability Frequency (1) -30 °C to +50 °C with step 10 °C at Rated Voltage; Test Env. Stability (2) VL, VN and VH of Rated Voltage at Ambient Climate. Test Setup Test Setup 1 EUT Conf. Ch.36,Ch.165 Report No.: Huawei Proprietary and Confidential Page 21 of 23 SYBH(Z-RF)20181224014002-2 Copyright © Huawei Technologies Co., Ltd. 005

RF Report for VOG-L29/VOG-L09 Public 6 Main Test Instruments This table gives a complete overview of the RF measurement equipment. Devices used during the test described are marked Main Test Equipment(BT/WIFI test system) Marked Equipment Name Manufacturer Model Serial Number Cal Date Cal-Due JS1120-3 BT/WIFI JS Tonscend JS0806-2 188060102 2018/05/30 2019/05/30 test system Power Detecting & R&S OSP-B157 101429 2018/07/23 2019/07/23 Samplig Unit 103085/10621 Power Sensor R&S NRP2 2018/05/17 2019/05/17 1 DC Power Supply KEITHLEY 2303 1342889 2018/10/24 2019/10/24 DC Power Supply KEITHLEY 2303 000500E 2018/05/21 2019/05/21 DC Power Supply KEITHLEY 2303 000381E 2018/05/21 2019/05/21 DC Power Supply KEITHLEY 2303 000510E 2018/05/21 2019/05/21 Temperature 562460029400 WEISS WKL64 2018/12/13 2019/12/13 Chamber 10 Spectrum Analyzer Agilent N9030A MY51380032 2018/07/23 2019/07/23 Spectrum Analyzer Agilent N9030A MY49431698 2018/07/23 2019/07/23 Spectrum Analyzer Keysight N9040B MY57212529 2018/06/28 2019/06/28 Signal Analyzer R&S FSQ31 200021 2018/07/23 2019/07/23 Signal Analyzer R&S FSU26 201069 2018/11/2 2019/11/2 Universal Radio Communication R&S CMW500 164699 2018/03/15 2019/03/15 Tester Universal Radio Communication R&S CMW500 159302 2018/07/23 2019/07/23 Tester Wireless Communication Test Agilent N4010A MY49081592 2018/07/23 2019/07/23 set Signal generator Agilent E8257D MY51500314 2018/04/27 2019/04/27 Signal generator Agilent E8257D MY49281095 2018/07/23 2019/07/23 Vector Signal R&S SMW200A 103447 2018/05/31 2019/05/31 Generator Vector Signal R&S SMU200A 104162 2018/07/23 2019/07/23 Generator Report No.: Huawei Proprietary and Confidential Page 22 of 23 SYBH(Z-RF)20181224014002-2 Copyright © Huawei Technologies Co., Ltd. 005

RF Report for VOG-L29/VOG-L09 Public 7 Measurement Uncertainty For a 95% confidence level (k = 2), the measurement expanded uncertainties for defined systems, in accordance with the recommendations of ISO 17025 as following: Test Item Extended Uncertainty Transmit Output Power Data Power [dBm] U = 0.58 dB RF Power Density, Conducted Power [dBm] U = 0.64 dB Bandwidth Magnitude [kHz] 20MHz: U=41.78kHz 40MHz: U=82.12kHz 80MHz: U=163.5kHz Frequency Stability Frequency Accuracy [Hz] U=82.24Hz Duty Cycle Duty Cycle [%] U=±2.06 % END Report No.: Huawei Proprietary and Confidential Page 23 of 23 SYBH(Z-RF)20181224014002-2 Copyright © Huawei Technologies Co., Ltd. 005


Document Created: 2019-02-02 12:27:52
Document Modified: 2019-02-02 12:27:52
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC