Test Report_8CC_R1

FCC ID: QISVOG-LX9

Test Report

Download: PDF
FCCID_4178023

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/1000205 Page: 1 of 19 TEST REPORT Application No.: HR/2019/10002 Applicant: Huawei Technologies Co., Ltd. Address of Applicant: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Manufacturer: Huawei Technologies Co., Ltd. Address of Manufacturer: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Factory: Huawei Technologies Co., Ltd. Address of Factory: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Equipment Under Test (EUT): EUT Name: Smart Phone Model No.: VOG-L29 VOG-L09 Trade mark: HUAWEI FCC ID: QISVOG-LX9 Standard(s) : 47 CFR Part 18 Date of Receipt: 2019-01-02 Date of Test: 2019-01-09 to 2019-01-10 Date of Issue: 2019-01-31 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Keny Xu EMC Laboratory Manager

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/1000205 Page: 2 of 19 Revision Record Version Chapter Date Modifier Remark 01 2019-01-31 Original Authorized for issue by: Leo Lai /Project Engineer Eric Fu /Reviewer

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/1000205 Page: 3 of 19 2 Test Summary Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted 47 CFR Part 18 FCC MP-5 Part 18.307 Pass disturbance Radiated emission 47 CFR Part 18 FCC MP-5 Part 18.305 Pass Note: The differences between are L29 and L04 as follows: Model VOG-L29 VOG-L04 PCB The same The same Frequency- The same The same GSM Frequency- The same The same WCDMA The same Different Frequency- Support B32 Support B66 LTE Unsupport B66 Unsupport B32 The same Different 4*4 Mimo Support B1、B3、B7 Support B2、B4、B7、B66 SIM Card Dual Single Support B32 Location ID: SAW filter:Z3401,Z4104, B32 B32 Diplexer:Z3402,Z5403 Unsupport B32 Hard RF RF low noise amplifier:U3405,U4103 Delete components related to the B32 RF ware circui Capacitor:C3422,C3423,C3425,C3442,C29 circuit. t 12,C3411,L3533,L4416,C3418,C4102 Inductor:L3412,L3422,L3413,L3408,L4124, L4137,L4139,L4140 Function Description:B32 main RF circuit and diversity RF circuit

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/1000205 Page: 4 of 19 Support B1/3/7 4*4MIMO and Support B2/7/66(4) 4*4MIMO and delete/replace components related circuit; delete/replace components related circuit; Location ID: Location ID: B1/3/7 4*4 B2/7/66(4) SAW filter: SAW filter of the 4th antenna :Z4403 MIM SAW filter of the 4th antenna :Z4403 (Vendor:KYOCERA type:SF18- O(the (Vendor:MURATA 1842M8SUA3) 3rd & type:SATEY1G96AU3F0AR00) SAW filter of the 3rd antenna :Z4301 4th SAW filter of the 3rd antenna :Z4301 (Vendor:KYOCERA type:SF18- anten (Vendor:MURATA 1842M8SUA3) na) type:SATEY1G96AU3F0AR00) Capacitor:L5507,C5401,C5402,C5517,C341 Inductor:L4419,L4412,L4416,C5444,C5407,L 1,L3533,L4416 5510 Inductor:L5510,L4330,L5415,L3408,L4419 Function Description:B2/7/66(4) 4*4MIMO Function Description: B1/3/7 4*4MIMO RF RF circuit circuit Unsupport CA_1-3-32 and delete/replace Unsupport B66 and delete/replace components related circuit; components related circuit; Support B66 &Support CA_2-66 B1/B Support CA_1-3-32 Location ID: 3/B32 Location ID: B2/B7/B66(4) diversity TRI SAW filter:Z4105 & B1/B3 (Vendor:MURATA B2/B Quadruplexer:Z3502(Vendor:QORVO, type:SATEY1G96AU3F0AR00) 66 type:QM25002TR13-5KHW) B2/B66(B4) RF Capacitor:C3533 Quadruplexer:Z3502( Vendor:KYOCERA &CA B2 SAW filter: Z4101(Vendor:MURATA ect. type:SQ25-1745K6SUA4) circui type:SAFFB1G96AB0F0AR1X ect. ) Capacitor:C3401,C3402,C3504,L4110 t L4123,L4122,L3523,L3532,C3520,L3512,L4 Inductor:L3532,L4111,L4112,L4107,L4109,L4 419 114,L4108,L4118,C3520,L3533,L3512 Function Description:B2 RX and CA_1-3-32 Function Description:B2/B66 Single-band diplexer RF circuit and CA main and diversity RF circuits B7 receiving matching circuit is adjusted to include: B7 B7 receive matching circuit include: RX Inductor:C4101 circui Inductor:L4127,L4126 B7 diversity TRI SAW t filter:Z4105(Vendor:MURATA type:SATEY1G96AU3F0AR00) Software Different Different Dimensions The same The same Appearance The same The same main The same The same antenna DIV antenna The same The same BT/Wi-Fi The same The same

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/1000205 Page: 5 of 19 antenna MIMO The same The same antenna NFC The same The same WPC The same The same Supported CA Different Different configuratio ns for DL CA Supported CA The same The same configuratio ns for UL CA Others NA NA The differences between are L29 and L09 as follows: Model VOG-L29 VOG-L09 PCB The same The same Frequency-GSM The same The same Frequency-WCDMA The same The same Frequency-LTE The same The same 4*4 Mimo The same The same SIM Card Dual Single B32 RF circuit The same The same 4*4 MIMO(the 3rd & 4th The same The same antenna) Hardware B1/B3/B32 & B2/B66 RF &CA The same The same circuit B7 RX circuit The same The same Software The same The same Dimensions The same The same Appearance The same The same main antenna The same The same DIV antenna The same The same BT/Wi-Fi antenna The same The same MIMO antenna The same The same NFC The same The same WPC The same The same Supported CA configurations for DL CA The same The same Supported CA configurations for UL CA The same The same

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/1000205 Page: 6 of 19 Others NA NA Remark: The only difference between L29 and L09 is the SIM card number, L29 support dual SIM cards, but L09 support single SIM card, no more other hardware difference. According to the differences between L04, L09 and L29 ,all the data in this report were copied from the L04 report(HR/2019/1000201).

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/1000205 Page: 7 of 19 3 Contents Page 1 COVER PAGE ............................................................................................................................................1 2 TEST SUMMARY .......................................................................................................................................3 3 CONTENTS ................................................................................................................................................7 4 GENERAL INFORMATION ........................................................................................................................8 4.1 DETAILS OF E.U.T. ...............................................................................................................................8 4.2 DESCRIPTION OF SUPPORT UNITS .........................................................................................................8 4.3 MEASUREMENT UNCERTAINTY ..............................................................................................................8 4.4 TEST LOCATION....................................................................................................................................9 4.5 TEST FACILITY ......................................................................................................................................9 4.6 DEVIATION FROM STANDARDS ...............................................................................................................9 4.7 ABNORMALITIES FROM STANDARD CONDITIONS .....................................................................................9 5 EQUIPMENT LIST ....................................................................................................................................10 6 RADIO SPECTRUM MATTER TEST RESULTS .....................................................................................11 6.1 CONDUCTED DISTURBANCE .................................................................................................................11 6.1.1 E.U.T. Operation ..........................................................................................................................11 6.1.2 Test Setup Diagram .....................................................................................................................11 6.1.3 Measurement Procedure and Data.............................................................................................11 6.2 RADIATED EMISSION ...........................................................................................................................14 6.2.1 E.U.T. Operation ..........................................................................................................................15 6.2.2 Test Setup Diagram .....................................................................................................................15 6.2.3 Measurement Procedure and Data.............................................................................................16 7 PHOTOGRAPHS ......................................................................................................................................19 7.1 TEST SETUP .......................................................................................................................................19 7.2 EUT CONSTRUCTIONAL DETAILS (EUT PHOTOS).................................................................................19

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/1000205 Page: 8 of 19 4 General Information 4.1 Details of E.U.T. Power supply: DC 3.82V from internal battery or AC/DC adapter Antenna Type: Loop Antenna Modulation Type: Load Modulation Operation Frequency: 110kHz-148kHz 4.2 Description of Support Units Description Manufacturer Model No. Specification Smart Phone Huawei VOG-L04 --- Adapter Huawei HW-05045U00 --- USB Cable Huawei WA0009 100cm shielded 4.3 Measurement Uncertainty No. Item Measurement Uncertainty 1 Radio Frequency ± 7.25 x 10-8 2 Duty cycle ± 0.37% 3 Occupied Bandwidth ± 3% 4 RF conducted power ± 0.75dB 5 RF power density ± 2.84dB 6 Conducted Spurious emissions ± 0.75dB ± 4.5dB (below 1GHz) 7 RF Radiated power ± 4.8dB (above 1GHz) ± 4.5dB (Below 1GHz) 8 Radiated Spurious emission test ± 4.8dB (Above 1GHz) 9 Temperature test ± 1°C 10 Humidity test ± 3% 11 Supply voltages ± 1.5% 12 Time ± 3%

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/1000205 Page: 9 of 19 4.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 4.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C. 4.6 Deviation from Standards None 4.7 Abnormalities from Standard Conditions None

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/1000205 Page: 10 of 19 5 Equipment List Conducted disturbance Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shielding Room ChangZhou ZhongYu GB-88 SEM001-06 2017-05-10 2020-05-09 Measurement Software AUDIX e3 V5.4.1221d N/A N/A N/A Coaxial Cable SGS N/A SEM024-01 2018-07-12 2019-07-11 LISN Rohde & Schwarz ENV216 SEM007-01 2018-09-25 2019-09-24 LISN ETS-LINDGREN 3816/2 SEM007-02 2018-04-02 2019-04-01 EMI Test Receiver Rohde & Schwarz ESCI SEM004-02 2018-04-02 2019-04-01 Radiated emission Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date 10m Semi-Anechoic SAEMC FSAC1018 SEM001-03 2018-03-31 2021-03-30 Chamber e3 V8.2014-6- Measurement Software AUDIX N/A N/A N/A 27 Coaxial Cable SGS N/A SEM029-01 2018-07-12 2019-07-11 EMI Test Receiver Rohde & Schwarz ESR SEM004-03 2018-04-02 2019-04-01 (9kHz-7GHz) Trilog-Broadband Antenna Schwarzbeck VULB9168 SEM003-18 2016-06-29 2019-06-28 30MHz-1GHz) Sonoma Instrument Pre-amplifier 310N SEM005-04 2018-04-13 2019-04-12 Co Active Loop Antenna ETS-Lindgren 6502 SEM003-08 2017-08-22 2020-08-21 General used equipment Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shanghai Humidity/ Temperature Meteorological ZJ1-2B SEM002-03 2018-09-27 2019-09-26 Indicator Industry Factory Shanghai Humidity/ Temperature Meteorological ZJ1-2B SEM002-04 2018-09-27 2019-09-26 Indicator Industry Factory Humidity/ Temperature Mingle N/A SEM002-08 2018-09-27 2019-09-26 Indicator Changchun Barometer Meteorological DYM3 SEM002-01 2018-04-08 2019-04-07 Industry Factory

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/1000205 Page: 11 of 19 6 Radio Spectrum Matter Test Results 6.1 Conducted disturbance Test Requirement Part 18.307 Test Method: FCC MP-5 Limit: 6.1.1 E.U.T. Operation Operating Environment: Temperature: 21.7 C Humidity: 57.5 % RH Atmospheric Pressure: 1000 mbar Test mode e: Charge mode_Keep the EUT in charging and reverse charging 6.1.2 Test Setup Diagram 6.1.3 Measurement Procedure and Data

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/1000205 Page: 12 of 19 Mode:e; Line:Live Line

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/1000205 Page: 13 of 19 Mode:e; Line:Neutral Line

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/1000205 Page: 14 of 19 6.2 Radiated emission Test Requirement Part 18.305 Test Method: FCC MP-5 Measurement Distance: 3m Limit: 1Fieldstrength may not exceed 10 μV/m at 1600 meters. Consumer equipment operating below 1000 MHz is not permitted the increase in field strength otherwise permitted here for power over 500 watts. 2Reduced to the greatest extent possible. 3Field strength may not exceed 10 μV/m at 1600 meters. Consumer equipment is not permitted the increase in field strength otherwise permitted here for over 500 watts. 4Induction cooking ranges manufactured prior to February 1, 1980, shall be subject to the field strength limits for miscellaneous ISM equipment.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/1000205 Page: 15 of 19 6.2.1 E.U.T. Operation Operating Environment: Temperature: 25 C Humidity: 51 % RH Atmospheric Pressure: 1030 mbar Pretest these e: Charge mode_Keep the EUT in charging and reverse charging modes to find f: Charge mode_Keep the EUT in reverse charging the worst case: The worst case f: Charge mode_Keep the EUT in reverse charging for final test: Test Mode: 6.2.2 Test Setup Diagram

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/1000205 Page: 16 of 19 6.2.3 Measurement Procedure and Data Test Procedure: a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 10 meter semi-anechoic chamber(30MHz-1000MHz) and 10 meter semi-anechoic chamber(9kHz-30MHz). The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 10 meters(30MHz-1000MHz) and 10 meter (9kHz-30MHz) away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Above 30MHz: The Analyzer/Receiver scanned from 30MHz to 1000MHz.The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. Below 30MHz: The Analyzer/Receiver scanned from 9kHz to 30MHz.The antenna height is 2 meters above the ground to determine the maximum value of the field strength. e. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was tuned to heights 2 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. f. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. g. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. h. Repeat above procedures until all frequencies measured was complete. i. Measurement Requirement: 1)This product belongs to non-ISM equipment, the field strength limit is 15uV/m at 300 meter distance. 2)Limit: 20log(15uV/m) +20log (300/3) =23.52+40=63.52dBuV/m at 3 meters distance

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/1000205 Page: 17 of 19 Mode f: 9kHz-150kHz

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/1000205 Page: 18 of 19 Mode f: 150kHz-30MHz

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: HR/2019/1000205 Page: 19 of 19 7 Photographs 7.1 Test Setup Please refer to setup photos. 7.2 EUT Constructional Details (EUT Photos) Please refer to external and internal photos for details. - End of the Report -


Document Created: 2019-03-28 09:21:37
Document Modified: 2019-03-28 09:21:37
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC