WLAN Test Report

FCC ID: QISTRT-LX1

Test Report

Download: PDF
FCCID_3344512

alp «_ "a HUAWEI (7 erified by GCTC fea Chas E.. omm $§yIm, s\ C MB %fFf SS P ERIAM § $ /g $y T/y (Gccrebmen) /’//'l/m\\‘\\\\ CNAS LO310 /"/,,/m\\\\‘\\ TESTING CERT #2174.01 FCC RF Test Report Product Name: Smart Phone Model Number: TRT—LX1 Report No: SYBH(Z—RF)014022017—2004 FCC ID: QISTRT—LX1 Reliability Laboratory of Huawei Technologies Co. (Global Compliance and Testing Center of Huawei Technologies Co., Ltd) Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518

RF Test Report of TRT-LX1 Notice 1. The laboratory has Passed the accreditation by China National Accreditation Service for Conformity Assessment (CNAS). The accreditation number is L0310. 2. The laboratory has Passed the accreditation by The American Association for Laboratory Accreditation (A2LA). The accreditation number is 2174.01. 3. The laboratory has been listed by the US Federal Communications Commission to perform electromagnetic emission measurements. The site recognition number is 97456. 4. The laboratory has been listed by Industry Canada to perform electromagnetic emission measurements. The recognition numbers of test site are 6369A-1. 5. The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. 6. The test report is invalid if there is any evidence of erasure and/or falsification. 7. The test report is only valid for the test samples. 8. Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without prior written approval from the laboratory. 9. The laboratory (Reliability Lab of Huawei Technologies Co., Ltd) is also named as “Global Compliance and Testing Center of Huawei Technologies Co., Ltd”, the both names have coexisted since 2009. Report No: Huawei Proprietary and Confidential Page 2 of 19 SYBH(Z-RF)014022017-2004 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of TRT-LX1 Applicant: Huawei Technologies Co., Ltd. Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Date of Receipt Sample: 2017-02-24 Start Date of Test: 2017-02-25 End Date of Test: 2017-03-15 Test Result: Pass Approved by Senior 2017-03-16 Roger Zhang Engineer: Date Name Signature Prepared by: 2017-03-15 Mao Wenli Date Name Signature Report No: Huawei Proprietary and Confidential Page 3 of 19 SYBH(Z-RF)014022017-2004 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of TRT-LX1 CONTENT 1 General Information ................................................................................................................................................ 5 1.1 Applied Standard........................................................................................................................................ 5 1.2 Test Location ............................................................................................................................................. 5 1.3 Test Environment Condition ....................................................................................................................... 5 2 Test Summary ........................................................................................................................................................ 6 3 Description of the Equipment under Test (EUT) ..................................................................................................... 7 3.1 General Description ................................................................................................................................... 7 3.2 EUT Identity ............................................................................................................................................... 7 3.3 Technical Description ................................................................................................................................. 8 4 General Test Conditions / Configurations ............................................................................................................... 9 4.1 Test Modes ................................................................................................................................................ 9 4.2 EUT Configurations .................................................................................................................................... 9 4.3 Test Environments ................................................................................................................................... 10 4.4 Antenna requirements .............................................................................................................................. 10 4.5 Description of tests................................................................................................................................... 11 4.6 Test Setups .............................................................................................................................................. 13 4.7 Test Conditions ........................................................................................................................................ 16 5 Main Test Instruments .......................................................................................................................................... 18 6 Appendixes ........................................................................................................................................................... 19 Report No: Huawei Proprietary and Confidential Page 4 of 19 SYBH(Z-RF)014022017-2004 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of TRT-LX1 1 General Information 1.1 Applied Standard Applied Rules: 47 CFR FCC Part 2, Subpart J 2014 47 CFR FCC Part 15, Subpart C 2014 Test Method: FCC KDB 558074 D01 DTS Meas Guidance v03r04 ANSI C63.10-2013, American National Standard for Testing Unlicensed Wireless Devices. 1.2 Test Location Test Location: Reliability Laboratory of Huawei Technologies Co., Ltd. Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C 1.3 Test Environment Condition Ambient Temperature: 19.5to 25 °C Ambient Relative Humidity: 40 to 55 % Atmospheric Pressure: Not applicable Report No: Huawei Proprietary and Confidential Page 5 of 19 SYBH(Z-RF)014022017-2004 Copyright © Huawei Technologies Co., Ltd.

s < HUAWEI RF Test Report of TRT—LX1 2 Test Summary Test Item FCC Part No. Requirements Test Result Verdict DTS (6 dB) Bandwidth 15.247(a)(2) 2500 kHz. Appendix A Pass Appendix B Occupied Bandwidth Pass KDB 558074 (6.0) 22 . Duty Cycle No limit Appendix C Pass For directional gain: < 30 Maximum Conducted Average dBm — (G[dBi] — 6 [dB]), L 15.247(0)(3) . Appendix D Pass Output Power Average; Otherwise: < 30 dBm, Average. For directional gain: < 8 . . dBm/3 kHz — (G[dBi] — 6 Maximum Power Spectral Density . Level 15.247(e) [dB]), Average. Appendix E Pass eve Otherwise: < 8 dBm/3 kHz, Average. Band Edges Compliance . . <—30 dBm/100 kHz if Appendix F Pass 15.247(d) total average power S Unwanted Emissions into m . power limit. Appendix G Pass Non—Restricted Frequency Bands Unwanted Emissions into 15.247(d) FCC Part 15.209 field Restricted Frequency Bands 15.209 strength limit; Appendix H Pass (Radiated) (NOTE 1) AC Power Line Conducted FCC Part 15.207 . 15.207 20 Appendix I Pass Emissions conducted limit; NOTE 1: According to KDB 558074, antenna—port conducted measurements are acceptable as an alternative to radiated measurements for demonstrating compliance to the limits in the restricted frequency bands. If conducted measurements are performed, then proper impedance matching must be ensured and an additional radiated test for cabinet/case emissions will also be required. Report No: Huawei Proprietary and Confidential Page 6 of 19 SYBH(Z—RF)014022017—2004 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of TRT-LX1 3 Description of the Equipment under Test (EUT) 3.1 General Description TRT-LX1 is subscriber equipment in the GSM/UMTS/LTE system.The GSM frequency band includes GSM850 and GSM900 and DCS1800 and PCS1900. The UMTS frequency band is band I/II/V/VIII. The LTE frequency band is band I/III/V/VII/VIII/XX.The Mobile Phone implements such functions as RF signal receiving/transmitting, LTE/UMTS and GSM/GPRS/EDGE protocol processing, voice, video MMS service, GPS and WIFI etc. Externally it provides micro SD card interface, earphone port (to provide voice service) and USIM card interface. It also provides bluetooth module to synchronize data between a PC and the phone, or to use the built-in modem of the phone to access the Internet with a PC, or to exchange data with other bluetooth devices. . NOTE: Only 2.4G WIFI test data included in this report. . 3.2 EUT Identity NOTE: Unless otherwise noted in the report, the functional boards installed in the units shall be selected from the below list, but not means all the functional boards listed below shall be installed in one unit. 3.2.1 Board Board Description Hardware Version Software Version Main Board HL1TRTM TRT-LX1C900B058 3.2.2 Sub-Assembly Sub-Assembly Sub-Assembly Name Model Manufacturer Description Huawei Technologies Input Voltage: ~100-240V Adapter HW-050200E01 Co., Ltd. Output Voltage: 5V/2A Huawei Technologies Input Voltage: ~100-240V Adapter HW-050200B01 Co., Ltd. Output Voltage: 5V/2A Huawei Technologies I Input Voltage: ~100-240V Adapter HW-050200A01 Co., Ltd. Output Voltage: 5V/2A Huawei Technologies Rated capacity: 3900mAh Battery HB406689ECW Co., Ltd. Nominal Voltage: +3.82V Report No: Huawei Proprietary and Confidential Page 7 of 19 SYBH(Z-RF)014022017-2004 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of TRT-LX1 3.3 Technical Description Characteristics Description IEEE 802.11 WLAN 802.11b (20 MHz channel bandwidth), 802.11g (20 MHz channel bandwidth) Mode Supported 802.11n (20 MHz channel bandwidth), 802.11n (40 MHz channel bandwidth) TX/RX Operating 2412-2462 fc = 2407 MHz + N * 5 MHz, where: Range MHz band - fc = “Operating Frequency” in MHz, - N = “Channel Number” with the range from 1 to 11 for the 20 MHz channel bandwidth, or 3 to 9 for the 40 MHz channel bandwidth Data Rate 802.11b 1 Mbps, 2 Mbps, 5.5 Mbps, 11 Mbps 802.11g 6 Mbps, 9 Mbps, 12 Mbps, 18 Mbps, 24 Mbps, 36 Mbps, 48 Mbps, 54 Mbps 802.11n (SISO) MCS 0 to MCS 7 Modulation Type DBPSK/DQPSK/CCK (DSSS), BPSK/QPSK/16QAM/64QAM (OFDM). Emission Designator 10M1G7D (for 802.11b mode), 16M5G7D (for 802.11g mod), 17M6G7D (for 802.11n20 mode), 35M6G7D (for 802.11n40 mode) TX Power Control Supported, Not Supported Standby Mode Supported, Not Supported Equipment Type Stand-alone equipment, Plug-in radio device, Combined equipment Antenna Description Isotropic Antenna Type External, Integrated Ports Ant 1, Ant 2, Ant 3 Smart System SISO (for 802.11b/g/n), Diversity (for 802.11b/g) : Tx & Rx Gain ANT1:-2 dBi (per antenna port, max.) Remark When the EUT is put into service, the practical maximum antenna gain should NOT exceed the value as described above. Power Supply Type AC/DC Adapter PoE: Other: Report No: Huawei Proprietary and Confidential Page 8 of 19 SYBH(Z-RF)014022017-2004 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of TRT-LX1 4 General Test Conditions / Configurations 4.1 Test Modes NOTE: Worst cases for each IEEE 802.11 mode are selected to perform tests. Test Mode Test Modes Description 11B IEEE 802.11b with data rate of 1 Mbps using SISO mode. 11G IEEE 802.11g with data rate of 6 Mbps using SISO mode. 11N20 IEEE 802.11n with data date of MCS0 and bandwidth of 20 MHz using SISO mode. 11N40 IEEE 802.11n with data date of MCS0 and bandwidth of 40 MHz using SISO mode. 4.2 EUT Configurations 4.2.1 General Configurations Configuration Description Test Antenna Ports Until otherwise specified, - All TX tests are performed at all TX antenna ports of the EUT, and - All RX tests are performed at all RX antenna ports of the EUT. Multiple RF Sources Other than the tested RF source of the EUT, other RF source(s) are disabled or shutdown during measurements. 4.2.2 Customized Configurations Test Mode RF Ch. TX Freq. [MHz] Ch. BW [MHz] Power Conf., per Port Duty cycle [%] 11B L Ch No. 1 / 2412 MHz 20 16 98 11B M Ch No. 6 / 2437 MHz 20 16 98 11B H Ch No. 11 / 2462 MHz 20 16 98 11G L Ch No. 1 / 2412 MHz 20 14 87 11G M Ch No. 6 / 2437 MHz 20 14 87 11G H Ch No. 11 / 2462 MHz 20 14 87 11N20 L Ch No. 1 / 2412 MHz 20 12 86 11N20 M Ch No. 6/ 2437 MHz 20 12 86 11N20 H Ch No. 11 / 2462 MHz 20 12 86 11N40 L Ch No. 3 / 2422 MHz 40 12 76 11N40 M Ch No. 6 / 2437 MHz 40 12 76 11N40 H Ch No. 9 / 2452 MHz 40 12 76 Report No: Huawei Proprietary and Confidential Page 9 of 19 SYBH(Z-RF)014022017-2004 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of TRT-LX1 4.3 Test Environments NOTE: The values used in the test report may be stringent than the declared. Environment Parameter Selected Values During Tests Temperature Voltage Relative Humidity NTNV Ambient 3.8VDC Ambient 4.4 Antenna requirements Excerpt from §15.203 of the FCC Rules/Regulations: “An intentional radiator antenna shall be designed to ensure that no antenna other than that furnished by the responsible party can be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section.” The antennas of the TRT-LX1 are permanently attached. There are no provisions for connection to an external antenna. Conclusion: The EUT FCC ID: QISTRT-LX1 unit complies with the requirement of §15.203. Ch. Frequency (MHz) Ch. Frequency (MHz) 01 2412 . . . . 06 2437 . . . . 11 2462 Frequency/ Channel Operations Report No: Huawei Proprietary and Confidential Page 10 of 19 SYBH(Z-RF)014022017-2004 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of TRT-LX1 4.5 Description of tests 4.5.1 Bandwidth measurement (a) Connect EUT test port to spectrum analyzer. (b) Set the EUT to transmit maximum output power at 2.4GHz, then set the measured frequency number and test the bandwidth with spectrum analyzer. 4.5.2 Duty Cycle measurement (a) Connect EUT test port to spectrum analyzer. (b) Set the EUT to transmit maximum output power at 2.4GHz, then set the measured frequency number and test the Duty Cycle with spectrum analyzer. 4.5.3 Maximum Conducted Average Output Power (a) Connect EUT test port to spectrum analyzer. (b) Set the EUT to transmit maximum output power at 2.4GHz. (c) Then set the EUT to transmit at high, middle and low frequency and measure the conducted output power separately. 4.5.4 Band edge spurious emission (a) Connect EUT test port to spectrum analyzer (b) Set the EUT to transmit maximum output power at 2.4GHz. (c) Then set the EUT to transmit at high, low frequency and measure the conducted band edge spurious separately. 4.5.5 Conducted RF spurious (a) Connect EUT test port to spectrum analyzer (b) Set the EUT to transmit maximum output power at 2.4GHz. (c) Then set the EUT to transmit at high, middle and low frequency and measure the conducted spurious separately. 4.5.6 Power spectral density (a) Connect EUT test port to spectrum analyzer (b) Set the EUT to transmit maximum output power at 2.4GHz. (c) Then set the EUT to transmit at high, middle and low frequency and measure the conducted power spectral density. 4.5.7 Radiated spurious emission & spurious in restricted band The test site semi-anechoic chamber has met the requirement of NSA tolerance 4dB according to the standards: ANSI C63.10 (2013). The EUT was set-up on insulator 80cm above the Ground Plane. The set-up and test methods were according to ANSI C63.10:2013.The Radiated Disturbance measurements were made using a Rohde and Schwarz Test Receiver and control software. A preliminary scan and a final scan of the emissions were made by using test script of software; the emissions were measured using a Quasi-Peak Detector below 1GHz, Peak Detector and AV Detector Report No: Huawei Proprietary and Confidential Page 11 of 19 SYBH(Z-RF)014022017-2004 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of TRT-LX1 above 1GHz. The maximal emission value was acquired by adjusting the antenna height, polarisation and turntable azimuth in accordance with the software setup. Normally, the height range of antenna was 1m to 4m,and the azimuth range of turntable was 0°to 360°. The receive antenna has two polarizations V and H. A portable or small unlicensed wireless device shall be placed on a non-metallic test fixture or other nonmetallic support during testing. The supporting fixture shall permit orientation of the EUT in each of three orthogonal (x, y, z) axis positions such that emissions from the EUT are maximized. The EUT communicates with the BTS simulator through Air interface. The EUT operated on the typical channel. Measurement bandwidth: 30 MHz – 1000 MHz: 120 kHz Measurement bandwidth: 1000 MHz – 10th Carrier Frequency: 1 MHz 4.5.8 Conducted Emission at Power Port The Table-top EUT was placed upon a non-metallic table 0.8 m above the horizontal metal reference ground plane. EUT was connected to LISN and LISN was connected to reference Ground Plane. EUT was 80cm from LISN. The set-up and test methods were according to ANSI C63.10: 2013. Conducted Disturbance at AC Port measurements were undertaken on the L and N Lines. The emissions were measured using a Quasi-Peak Detector and Average Detector. The EUT communicates with the BTS simulator through Air interface, the BTS simulator controls the Wireless Modem to transmitter the maximum power which defined in specification of product. The Wireless Modem operated on the typical channel. Measurement bandwidth (RBW) for 150kHz to 30 MHz: 9 kHz; Report No: Huawei Proprietary and Confidential Page 12 of 19 SYBH(Z-RF)014022017-2004 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of TRT-LX1 4.6 Test Setups 4.6.1 Test Setup 1 The WLAN component’s antenna ports(s) of the EUT are connected to the measurement instrument per an appropriate attenuator. The EUT is controlled by PC/software to emit the specified signals for the purpose of measurements. Jumper Cable for connecting to RF Cables (If applicable) RF Cables for testing EUT Attenuator WLAN Measurement Component Instrument WLAN component's antenna port(s) Power Control Supply PC 4.6.2 Test Setup 2 The test site semi-anechoic chamber has met the requirement of NSA tolerance 4 dB according to the standards: ANSI C63.4. The test distance is 3m.The setup is according to ANSI C63.4 and CAN/CSA-CEI/IEC CISPR 22. The maximal emission value is acquired by adjusting the antenna height, polarisation and turntable azimuth. Normally, the height range of antenna is 1 m to 4 m, the azimuth range of turntable is 0° to 360°, and the receive antenna has two polarizations Vertical (V) and Horizontal (H). Report No: Huawei Proprietary and Confidential Page 13 of 19 SYBH(Z-RF)014022017-2004 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of TRT-LX1 Semi-Anechoic Chamber MAX:4 m Antenna EUT Preamplifier MIN:1 m 0.8 m AE Signal wire GRP Ferrite Clamp Receiver (Below 1 GHz) (Above 1 GHz) Report No: Huawei Proprietary and Confidential Page 14 of 19 SYBH(Z-RF)014022017-2004 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of TRT-LX1 4.6.3 Test Setup 3 The mains cable of the EUT (maybe per AC/DC Adapter) must be connected to LISN. The LISN shall be placed 0.8 m from the boundary of EUT and bonded to a ground reference plane for LISN mounted on top of the ground reference plane. This distance is between the closest points of the LISN and the EUT. All other units of the EUT and associated equipment shall be at least 0.8m from the LISN. Ground connections, where required for safety purposes, shall be connected to the reference ground point of the LISN and, where not otherwise provided or specified by the manufacturer, shall be of same length as the mains cable and run parallel to the mains connection at a separation distance of not more than 0.1 m. Shielding room 0.4m EUT Table m 0.8 0.8m 1m le : cab w er 1m Po le: Receive c ab i ng Power input LISN ou d Gr D≤10cm GRP Report No: Huawei Proprietary and Confidential Page 15 of 19 SYBH(Z-RF)014022017-2004 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of TRT-LX1 4.7 Test Conditions Test Case Test Conditions Configuration Description DTS (6 dB) Measurement Method FCC KDB 558074 §8.1 Option 2. Bandwidth Test Environment NTNV Test Setup Test Setup 1 EUT Configuration 11B_L, 11B_M, 11B_H 11G_L, 11G_M, 11G_H 11N20_L, 11 N20_M, 11 N20_H 11N40_L, 11 N40_M, 11 N40_H Occupied Measurement Method FCC KDB 558074 §8.2 Option 2. Bandwidth Test Environment NTNV Test Setup Test Setup 1 EUT Configuration 11B_L, 11B_M, 11B_H 11G_L, 11G_M, 11G_H 11N20_L, 11 N20_M, 11 N20_H 11N40_L, 11 N40_M, 11 N40_H Maximum Measurement Method FCC KDB 558074 §9.2 .2. 4 Conducted Test Environment NTNV Average Output Test Setup Test Setup 1 Power EUT Configuration 11B_L, 11B_M, 11B_H 11G_L, 11G_M, 11G_H 11N20_L, 11 N20_M, 11 N20_H 11N40_L, 11 N40_M, 11 N40_H Maximum Power Measurement Method FCC KDB 558074§10.1 (peak PSD). Spectral Density Test Environment NTNV Level Test Setup Test Setup 1 EUT Configuration 11B_L, 11B_M, 11B_H 11G_L, 11G_M, 11G_H 11N20_L, 11 N20_M, 11 N20_H 11N40_L, 11 N40_M, 11 N40_H Band Edges Measurement Method FCC KDB 558074 §13.0. Compliance Test Environment NTNV Test Setup Test Setup 1 EUT Configuration 11B_L, 11B_M, 11B_H 11G_L, 11G_M, 11G_H 11N20_L, 11 N20_M, 11 N20_H 11N40_L, 11 N40_M, 11 N40_H Unwanted Measurement Method FCC KDB 558074 §11.0 Emissions into Test Environment NTNV Non-Restricted Test Setup Test Setup 1 Report No: Huawei Proprietary and Confidential Page 16 of 19 SYBH(Z-RF)014022017-2004 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of TRT-LX1 Test Case Test Conditions Configuration Description Frequency Bands EUT Configuration 11B_L, 11B_M, 11B_H 11G_L, 11G_M, 11G_H 11N20_L, 11 N20_M, 11 N20_H 11N40_L, 11 N40_M, 11 N40_H Unwanted Measurement Method ANSI C63.10; FCC KDB 558074 §12.1, Radiated Emissions into Test Environment NTNV Restricted Test Setup Test Setup 2 Frequency Bands EUT Placement Flatwise, Upright, Hung (Radiated) EUT Configuration 11B_L, 11B_M, 11B_H 11G_L, 11G_M, 11G_H 11N20_L, 11 N20_M, 11 N20_H 11N40_L, 11 N40_M, 11 N40_H AC Power Line Measurement Method Part 15.207 Conducted Test Environment NTNV Emissions Test Setup Test Setup 3 EUT Configuration (Worst Conf.). Report No: Huawei Proprietary and Confidential Page 17 of 19 SYBH(Z-RF)014022017-2004 Copyright © Huawei Technologies Co., Ltd.

s < HUAWEI RF Test Report of TRT—LX1 5 Main Test Instruments Main Test Equipments Equipment Name Manufacturer Model Serial Number Cal Date Cal— Due Power supply KEITHLEY 2303 1342889 2016/10/13 2017/10/12 Wireless Communication ! unicall Agilent m4cioa mv4gosisg2 2o18§6 201785 Test set . | Radi Universal Radio Rss CMU2z200 123299 201814 201714 Communication Tester Spectrum Analyzer Agilent N9020A MY52090652 2016/6/29 2017/6/29 . | Radi Universal Radio Ras Cmws00 126854 201812229 201712729 Communication Tester Signal Analyzer R&S FSQ31 200021 2016/8/5 2017/8/5 Spectrum Analyzer Agilent N9030A MY49431698 2016/8/5 2017/8/5 Temperature Chamber WEISS WKL64 56246002940010 2016/12/21 2017/12/21 Signal generator Agilent E8257D MY49281095 2016/8/5 2017/8/5 Vector Signal Generator R&S SMU200A 104162 2016/8/5 2017/8/5 Test receiver R&S ESU26 100387 2016/6/21 2017/6/21 Test receiver R&S ESCI 101163 2016/11/10 2017/1/10 Spectrum analyzer R&S FSU3 200474 2016/5/24 2017/5/24 Spectrum analyzer R&S FSU43 100144 2016/6/2 2017/6/2 LOOP R&S HFH2—Z2 100262 2015/4/30 2017/4/29 Antennas(OkHz—30MHz) LOOP 0o R&S HFH2—Z2 100263 2015/4/30 2017/4/29 Antennas(OkHz—30MHz) Trilog Broadband Antenna VULB 09 SCHWARZBECK 9163—490 2015/4/30 2017/4/29 (30M~3GHz) 9163 Trilog Broadband Antenna VULB 09 SCHWARZBECK 9163—520 2015/4/30 2017/4/29 (30M~3GHz) 9163 Double—Ridged Waveguide Horn R&S HF907 100304 2015/4/30 2017/4/29 Antenna (1G~18GHz) double ridged horn whie antenna (0.8G—18GHz) ag Rss HF9o7 100305 2015430 2017/4/29 Report No: Huawei Proprietary and Confidential Page 18 of 19 SYBH(Z—RF)014022017—2004 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of TRT-LX1 Pyramidal Horn ETS-Lindgren Sep-60 5140299 2015/7/15 2017/7/14 Antenna(18GHz-26.5GHz) Artificial Main Network R&S ENV4200 100134 2016/6/2 2017/6/2 Line Impedance R&S ENV216 100382 2016/6/2 2017/6/2 Stabilization Network Signal Generator Agilent E4438C MY49071538 2016/12/15 2017/12/15 Power Detecting & R&S OSP-B157 100914 2016/8/5 2017/8/5 Sampling Unit Software Information Test Item Software Name Manufacturer Version RE EMC32 R&S V9.25.0 CE EMC32 R&S V9.25.0 6 Appendixes Appendix No. Description SYBH(Z-RF)014022017-2004-A Appendix for 2.4G WLAN END Report No: Huawei Proprietary and Confidential Page 19 of 19 SYBH(Z-RF)014022017-2004 Copyright © Huawei Technologies Co., Ltd.


Document Created: 2017-12-28 23:35:27
Document Modified: 2017-12-28 23:35:27
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC