Test Report_BLE

FCC ID: QISSNE-LX3

Test Report

Download: PDF
FCCID_4003925

FCC RF Test Report Product Name: Smart Phone Model Number: SNE-LX3 Report No.: SYBH(Z-RF)20180813013001-2003 FCC ID：QISSNE-LX3 Reliability Laboratory of Huawei Technologies Co., Ltd. (Global Compliance and Testing Center of Huawei Technologies Co., Ltd) No.2 New City Avenue Songshan Lake Sci. &Tech. Industry Park, Dongguan, Guangdong, 523808, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518

RF Test Report of SNE-LX3 Notice 1. The laboratory has passed the accreditation by China National Accreditation Service for Conformity Assessment (CNAS). The accreditation number is L0310. 2. The laboratory has passed the accreditation by The American Association for Laboratory Accreditation (A2LA). The accreditation number is 2174.01 . 3. The laboratory has been recognized by the US Federal Communications Commission (FCC) to perform compliance testing subject to the Commission's Certification rules. The Designation Number is CN1173, and the Test Firm Registration Number is 294140. 4. The laboratory has been listed by Industry Canada to perform electromagnetic emission measurements. The recognition numbers of test site are 6369A-1. 5. The laboratory (Reliability Lab of Huawei Technologies Co., Ltd) is also named “Global Compliance and Testing Center of Huawei Technologies Co., Ltd”, the both names have coexisted since 2009. 6. The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. 7. The test report is invalid if there is any evidence of erasure and/or falsification. 8. The test report is only valid for the test samples. 9. Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without prior written approval from the laboratory. Report No.: Huawei Proprietary and Confidential Page 2 of 16 SYBH(Z-RF)20180813013001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of SNE-LX3 Applicant: Huawei Technologies Co., Ltd. Address: No.2 New City Avenue Songshan Lake Sci. &Tech. Industry Park, Dongguan, Guangdong, 523808, P.R.C Date of Receipt Sample: 2018-08-22 Start Date of Test: 2018-08-27 End Date of Test: 2018-09-10 Test Result: Pass Approved by Senior 2018-09-10 He Hao Engineer: Date Name Signature Prepared by: 2018-09-10 ZhouLingbo Date Name Signature Report No.: Huawei Proprietary and Confidential Page 3 of 16 SYBH(Z-RF)20180813013001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of SNE-LX3 CONTENT 1 General Information ................................................................................................................................................ 5 1.1 Applied Standard....................................................................................................................................... 5 1.2 Test Location............................................................................................................................................. 5 1.3 Test Environment Condition ...................................................................................................................... 5 2 Test Summary ........................................................................................................................................................ 6 3 Description of the Equipment under Test (EUT) ..................................................................................................... 7 3.1 General Description .................................................................................................................................. 7 3.2 EUT Identity .............................................................................................................................................. 7 3.3 Technical Description ................................................................................................................................ 9 4 General Test Conditions / Configurations ............................................................................................................. 10 4.1 EUT Configurations ................................................................................................................................. 10 4.2 Test Environments .................................................................................................................................. 10 4.3 Test Setups ............................................................................................................................................. 11 4.4 Test Conditions ....................................................................................................................................... 14 5 Main Test Instruments .......................................................................................................................................... 15 6 Measurement Uncertainty..................................................................................................................................... 16 7 Appendixes ........................................................................................................................................................... 16 Report No.: Huawei Proprietary and Confidential Page 4 of 16 SYBH(Z-RF)20180813013001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of SNE-LX3 1 General Information 1.1 Applied Standard Applied Rules: 47 CFR FCC Part 2, Subpart J 47 CFR FCC Part 15, Subpart C Test Method: FCC KDB 558074 D01 DTS Meas Guidance v04 ANSI C63.10-2013, American National Standard for Testing Unlicensed Wireless Devices. 1.2 Test Location Test Location : Reliability Laboratory of Huawei Technologies Co., Ltd. Address: No.2 New City Avenue Songshan Lake Sci. &Tech. Industry Park, Dongguan, Guangdong, P.R.C 1.3 Test Environment Condition Ambient Temperature: 19.5to 25 °C Ambient Relative Humidity: 40 to 55 % Atmospheric Pressure: Not applicable Report No.: Huawei Proprietary and Confidential Page 5 of 16 SYBH(Z-RF)20180813013001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of SNE-LX3 2 Test Summary Test Item FCC Rule No. Requirements Test Result Verdict DTS (6 dB) Bandwidth 15.247(a)(2) ≥ 500 kHz. Appendix A Pass Occupied Bandwidth --- No limit. Appendix B Pass Duty Cycle KDB 558074 D01 No limit. Appendix C Pass （6.0） FCC: For directional gain: Maximum Conducted Average Conducted < 30 dBm – 15.247(b)(3) Appendix D Pass Output Power (G[dBi] – 6 [dB]); Otherwise: Conducted < 30 dBm, Maximum Power Spectral 15.247(e) Conducted < 8 dBm/3 kHz. Appendix E Pass Density Level Band Edges Compliance Appendix F Pass < -30 dBr/100 kHz if total Unwanted Emissions into 15.247(d) average power ≤ power limit. Non-Restricted Frequency Appendix G Pass Bands Unwanted Emissions into 15.247(d) FCC Part 15.209 field Restricted Frequency Bands 15.209 Appendix H Pass strength limit; (Radiated) (NOTE 1) AC Power Line Conducted FCC Part 15.207 conducted 15.207 Appendix I Pass Emissions limit; NOTE : According to KDB 558074 D01, antenna-port conducted measurements are acceptable as an alternative to radiated measurements for demonstrating compliance to the limits in the restricted frequency bands. If conducted measurements are performed, then proper impedance matching must be ensured and an additional radiated test for cabinet/case emissions will also be required. Report No.: Huawei Proprietary and Confidential Page 6 of 16 SYBH(Z-RF)20180813013001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of SNE-LX3 3 Description of the Equipment under Test (EUT) 3.1 General Description SNE-LX3 is subscriber equipment in the GSM/WCDMA/LTE system. The GSM frequency band includes GSM850 and GSM900 and DCS1800 and PCS1900.The UMTS frequency band is B1 and B2 and B4 and B5 and B8. The LTE frequency band is B2 and B4 and B5 and B7 and B12 and B17 and B28. The Mobile Phone implements such functions as RF signal receiving/transmitting, LTE/HSPA/UMTS and GSM/GPRS/EDGE protocol processing, voice, video MMS service, GPS, AGPS, NFC and WIFI etc. Externally it provides one micro SD card interface (it can also used as SIM card interface), earphone port (to provide voice service) and one SIM card interface. It also provides Bluetooth module to synchronize data between a PC and the phone, or to use the built-in modem of the phone to access the Internet with a PC, or to exchange data with other Bluetooth devices. SNE-LX3 may support single SIM or double SIM .Model SNE-LX3 is a smart phone with dual SIM or single SIM. The difference of them is only for SIM CARD. SNE-LX3 single SIM is deleted one SIM by software. Note: Only Bluetooth BLE test data included in this report. 3.2 EUT Identity NOTE: Unless otherwise noted in the report, the functional boards installed in the units shall be selected from the below list, but not means all the functional boards listed below shall be installed in one unit. 3.2.1 Board Board Description Hardware Version Software Version Main Board HL2SNEL21M SNE-LX3 8.2.0.118M(C900) Report No.: Huawei Proprietary and Confidential Page 7 of 16 SYBH(Z-RF)20180813013001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of SNE-LX3 3.2.2 Sub- Assembly Sub-Assembly Sub-Assembly Name Model Manufacturer Description Input voltage: 100-240V ~50/60Hz 0.5A Huawei Technologies Adapter HW-059200BHQ Output voltage: 5V 2A OR Co.,Ltd 9V 2A Input voltage: 100-240V ~50/60Hz 0.5A Huawei Technologies Adapter HW-059200AHQ Output voltage: 5V 2A OR Co.,Ltd 9V 2A Input voltage: 100-240V ~50/60Hz 0.5A Huawei Technologies Adapter HW-059200UHQ Output voltage: 5V 2A OR Co.,Ltd 9V 2A Input voltage: 100-240V ~50/60Hz 0.5A Huawei Technologies Adapter HW-059200EHQ Output voltage: 5V 2A OR Co.,Ltd 9V 2A Input voltage: 100-240V ~50/60Hz 0.5A Huawei Technologies Adapter HW-090200BH0 Output voltage: 5V 2A OR Co.,Ltd 9V 2A Input voltage: 100-240V ~50/60Hz 0.5A Huawei Technologies Adapter HW-090200AH0 Output voltage: 5V 2A OR Co.,Ltd 9V 2A Input voltage: 100-240V ~50/60Hz 0.5A Huawei Technologies Adapter HW-090200UH0 Output voltage: 5V 2A OR Co.,Ltd 9V 2A Input voltage: 100-240V ~50/60Hz 0.5A Huawei Technologies Adapter HW-090200EH0 Output voltage: 5V 2A OR Co.,Ltd 9V 2A Huawei Technologies Input voltage: 100-240V ~50/60Hz 0.5A Adapter HW-050200R01 Co.,Ltd Output voltage: 5V 2A Rated capacity: 3650mAh Huawei Technologies Rechargeable Li-ion HB386589ECW Nominal Voltage: +3.82V Co.,Ltd Charging Voltage: +4.40V Report No.: Huawei Proprietary and Confidential Page 8 of 16 SYBH(Z-RF)20180813013001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of SNE-LX3 3.3 Technical Description Characteristics Description TX/RX Operating 2400-2483.5 fc = 2402 MHz + N * 2 MHz, where: Range MHz band - fc = “Operating Frequency” in MHz, - N = “Channel Number” with the range from 0 to 39. Modulation Type Digital GFSK, Emission Designator GFSK for BT 4.2: 710KFXD Bluetooth Power Class Class 1 Antenna Description Isotropic Antenna Antenna Type External, Integrated Antenna Gain 0.1 dBi (per antenna port, max.) Power Supply AC/DC Adapter PoE: Other: Report No.: Huawei Proprietary and Confidential Page 9 of 16 SYBH(Z-RF)20180813013001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of SNE-LX3 4 General Test Conditions / Configurations 4.1 EUT Configurations 4.1.1 General Configurations Configuration Description Test Antenna Ports Until otherwise specified, - All TX tests are performed at all TX antenna ports of the EUT, and - All RX tests are performed at all RX antenna ports of the EUT. Multiple RF Sources Other than the tested RF source of the EUT, other RF source(s) are disabled or shutdown during measurements. 4.1.2 Customized Configurations # EUT Conf. Signal Description Operating Frequency Duty cycle TM1_Ch0 GFSK for BT 4.2 modulation, package type DH5, hopping off. Ch No. 0 / 2402 MHz 60.5% TM1_Ch19 GFSK for BT 4.2 modulation, package type DH5, hopping off. Ch No. 19 / 2440 MHz 60.5% TM1_Ch39 GFSK for BT 4.2 modulation, package type DH5, hopping off. Ch No. 39 / 2480 MHz 60.5% 4.2 Test Environments NOTE: The values used in the test report may be stringent than the declared. Environment Parameter Selected Values During Tests Temperature Voltage Relative Humidity NTNV Ambient 3.8 VDC Ambient Report No.: Huawei Proprietary and Confidential Page 10 of 16 SYBH(Z-RF)20180813013001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of SNE-LX3 4.3 Test Setups 4.3.1 Test Setup 1 The Bluetooth component’s antenna ports(s) of the EUT are connected to the measurement instrument per an appropriate attenuator. The EUT is controlled by Bluetooth System Simulator and/or PC/software to emit the specified signals for the purpose of measurements. Jumper Cable for connecting to RF Cables (If applicable) Measurement Attenuator Instrument EUT Bluetooth RF Cables Power for testing Component Splitter Bluetooth Bluetooth System component's antenna port Simulator Power Control Supply PC 4.3.2 Test Setup 2 The semi-anechoic chamber and full-anechoic chamber has met the requirement of ANSI C63.4. The test distance is 3m.The setup is according to ANSI C63.4 and CAN/CSA-CEI/IEC CISPR 22. The maximal emission value is acquired by adjusting the antenna height, polarisation and turntable azimuth. Normally, the height range of antenna is 1 m to 4 m, the azimuth range of turntable is 0°to 360°, and the receive antenna has two polarizations Vertical (V) and Horizontal (H). Report No.: Huawei Proprietary and Confidential Page 11 of 16 SYBH(Z-RF)20180813013001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of SNE-LX3 (Below 1 GHz) (Above 1 GHz) Report No.: Huawei Proprietary and Confidential Page 12 of 16 SYBH(Z-RF)20180813013001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of SNE-LX3 4.3.3 Test Setup 3 The mains cable of the EUT (maybe per AC/DC Adapter) must be connected to LISN. The LISN shall be placed 0.8 m from the boundary of EUT and bonded to a ground reference plane for LISN mounted on top of the ground reference plane. This distance is between the closest points of the LISN and the EUT. All other units of the EUT and associated equipment shall be at least 0.8m from the LISN. Ground connections, where required for safety purposes, shall be connected to the reference ground point of the LISN and, where not otherwise provided or specified by the manufacturer, shall be of same length as the mains cable and run parallel to the mains connection at a separation distance of not more than 0.1 m. Shielding room 0.4m EUT Table m 0.8 0.8m m :1 ble r ca we :1 m Po ble Receive a gc LISN din Power input ou Gr D≤10cm GRP Report No.: Huawei Proprietary and Confidential Page 13 of 16 SYBH(Z-RF)20180813013001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of SNE-LX3 4.4 Test Conditions Test Case Test Conditions Configuration Description 6dB Emission Meas. Method FCC KDB 558074 D01 §8.1 Option 2. Bandwidth (EBW) Test Env. NTNV Test Setup Test Setup 1 EUT Conf. TM1_Ch0, TM1_Ch19, TM1_Ch39. Occupied Meas. Method FCC KDB 558074 D01 §8.2 Option 2. Bandwidth Test Env. NTNV Test Setup Test Setup 1 EUT Conf. TM1_Ch0, TM1_Ch19, TM1_Ch39. Maximum Meas. Method FCC KDB 558074 D01 §9.2 .2. 4 Conducted Average Test Env. NTNV Output Power Test Setup Test Setup 1 EUT Conf. TM1_Ch0, TM1_Ch19, TM1_Ch39. Maximum Power Meas. Method FCC KDB 558074 D01§10.1 Spectral Density Test Env. NTNV Level Test Setup Test Setup 1 EUT Conf. TM1_Ch0, TM1_Ch19, TM1_Ch39. Band edge spurious Meas. Method FCC KDB 558074 D01§13.0. emission Test Env. NTNV Test Setup Test Setup 1 EUT Conf. TM1_Ch0, TM1_Ch39. Unwanted Meas. Method FCC KDB 558074 D01§11.0 Emissions into Test Env. NTNV Non-Restricted Test Setup Test Setup 1 Frequency Bands EUT Conf. TM1_Ch0, TM1_Ch19, TM1_Ch39. Unwanted Meas. Method ANSI C63.10; FCC KDB 558074 D01§12.1, Radiated Emissions into Test Env. NTNV Restricted Test Setup Test Setup 2 Frequency Bands EUT Conf. 30 MHz -1 GHz TM1_Ch0 (Worst Conf.). (Radiated) 1-3 GHz TM1_Ch0, TM1_Ch19, TM1_Ch39. 3-18 GHz TM1_Ch19 (Worst Conf.), 18-26.5 GHz TM1_Ch0 (Worst Conf.). AC Power Line Meas. Method AC mains conducted. Conducted Pre: RBW = 10 kHz; Det. = Peak. Emissions Final: RBW = 9 kHz; Det. = CISPR Quasi-Peak & Average. Test Env. NTNV Test Setup Test Setup 3 EUT Conf. TM1_Ch39. Report No.: Huawei Proprietary and Confidential Page 14 of 16 SYBH(Z-RF)20180813013001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of SNE-LX3 5 Main Test Instruments Conducted: Main Test Equipments Equipment Name Manufacturer Model Serial Number Cal Date Cal- Due Spectrum Analyzer Agilent N9030A MY49431698 2018/7/23 2019/7/22 Signal generator Agilent E8257D MY51500314 2018/04/27 2019/04/26 Radiation: Main Test Equipments Equipment Name Manufacturer Model Serial Number Cal Date Cal- Due Test receiver R&S ESU26 100387 2018/1/20 2019/1/19 Test receiver R&S ESCI 101163 2018/1/20 2019/1/19 Spectrum analyzer R&S FSU3 200474 2018/1/20 2019/1/19 Spectrum analyzer R&S FSU43 100144 2018/1/20 2019/1/19 LOOP R&S HFH2-Z2 100262 2017/4/25 2019/4/25 Antennas(9kHz-30MHz) LOOP R&S HFH2-Z2 100263 2017/4/25 2019/4/25 Antennas(9kHz-30MHz) Trilog Broadband Antenna VULB SCHWARZBECK 9163-357 2017/4/21 2019/4/20 (30M~3GHz) 9163 Double-Ridged Waveguide R&S HF907 100304 2017/5/27 2019/5/27 Horn Antenna (1G~18GHz) Pyramidal Horn ETS-Lindgren 3160-09 5140299 2017/7/20 2019/7/19 Antenna(18GHz-26.5GHz) Artificial Main Network R&S ENV4200 100134 2018/5/8 2019/5/7 Line Impedance R&S ENV216 100382 2018/5/8 2019/5/7 Stabilization Network Software Information Test Item Software Name Manufacturer Version RE EMC32 R&S V9.25.0 CE EMC32 R&S V9.25.0 Report No.: Huawei Proprietary and Confidential Page 15 of 16 SYBH(Z-RF)20180813013001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of SNE-LX3 6 Measurement Uncertainty For a 95% confidence level (k = 2), the measurement expanded uncertainties for defined systems, in accordance with the recommendations of ISO 17025 as following: Test Item Extended Uncertainty Transmit Output Power Data Power [dBm] U = 0.39 dB RF Power Density, Conducted Power [dBm] U = 0.64 dB Bandwidth Magnitude [%] U=7% Band Edge Compliance Disturbance Power [dBm] U = 0.9 dB Spurious Emissions, Conducted Disturbance Power [dBm] 20MHz~3.6GHz：U＝0.88dB 3.6GHz~8.4GHz：U＝1.08dB 8.4GHz~13.6GHz：U＝1.24dB 13.6GHz~22GHz：U＝1.34dB 22GHz~26.5GHz：U＝1.36dB Field Strength of Spurious Radiation ERP/EIRP [dBm] For 3 m Chamber: U = 5.90 dB (30 MHz-1 GHz) U = 4.94 dB (1 GHz-18 GHz) U = 4.24 dB (18 GHz-26.5 GHz) Frequency Stability Frequency Accuracy [Hz] U=41.58Hz AC Power Line Conducted Emissions Disturbance Voltage[dBμV] U=2.3 dB Duty Cycle Duty Cycle [%] U=±2.06 % 7 Appendixes Appendix No. Description SYBH(Z-RF)20180813013001-2003-A Appendix for Bluetooth BLE END Report No.: Huawei Proprietary and Confidential Page 16 of 16 SYBH(Z-RF)20180813013001-2003 Copyright © Huawei Technologies Co., Ltd.


Document Created: 2018-09-10 18:11:21
Document Modified: 2018-09-10 18:11:21
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC