Test Report_Wi-Fi_2.4GHz

FCC ID: QISELE-L04M

Test Report

Download: PDF

                      FCC&ISED
                    RF Test Report
                      Product Name: Smart Phone

                        Model Number: ELE-L04m


             Report No.: SYBH(Z-RF) 20190401017001-2004
                            FCC ID:QISELE-L04M
                              IC: 6369A-ELEL04M


                                    APPROVED                            PREPARED
       Authorized
                                   (Lab Manager)                       (Test Engineer)

          BY


         DATE                       2019-04-30                           2019-04-30




            Reliability Laboratory of Huawei Technologies Co., Ltd.

  (Global Compliance and Testing Center of Huawei Technologies Co., Ltd.)


No.2, New City Avenue, Songshan Lake Sci. & Tech. Industry Park, Dongguan, 523808, P.R.C
                Telephone: +86 769 23830808        Fax: +86 769 23837628


           RF Report for ELE-L04m                                                                  Public




                                    ※     ※         Notice            ※     ※


   1. The laboratory has passed the accreditation by The American Association for Laboratory

   Accreditation (A2LA). The accreditation number is 2174.01.

   2. The laboratory has been recognized by the US Federal Communications Commission (FCC) to

   perform compliance testing subject to the Commission's Certification rules. The Designation Number

   is CN1173, and the Test Firm Registration Number is 294140.

   3. The laboratory has been recognized by the Innovation, Science and Economic Development

   Canada (ISED) to test to Canadian radio equipment requirements. The CAB identifier is CN0003, an

   d the ISED# is 21741.

   4. The laboratory (Reliability Lab of Huawei Technologies Co., Ltd) is also named “Global Compliance

   and Testing Center of Huawei Technologies Co., Ltd”, the both names have coexisted since 2009.

   5. The test report is invalid if not marked with the signatures of the persons responsible for preparing

   and approving the test report.

   6. The test report is invalid if there is any evidence of erasure and/or falsification.

   7. The test report is only valid for the test samples.

   8. Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes

   without prior written approval from the laboratory.

   9. If any question about this report, please contact the laboratory (PublicGCTC@huawei.com).




Report No.: SYBH(Z-RF)                  Huawei Proprietary and Confidential                           Page 2 of 22
20190401017001-2004                  Copyright © Huawei Technologies Co., Ltd.


            RF Report for ELE-L04m                                                                    Public




                                             MODIFICATION RECORD



   No.    Report No                       Modification Description
   1      SYBH(Z-RF)                      First release.
          20190401017001-2004


                                                   DECLARATION
   Type               Description
   Multiple                The present report applies to single model.
   Models                  The present report applies to several models. The practical measurements are
   Applications            performed with the model


                           The present report only presents the worst test case of all modes, see relevant test
                           results for detailed.




Report No.: SYBH(Z-RF)                    Huawei Proprietary and Confidential                           Page 3 of 22
20190401017001-2004                    Copyright © Huawei Technologies Co., Ltd.


             RF Report for ELE-L04m                                                                                                                                                    Public




   1    Table of contents

   1    Table of contents ............................................................................................................................................................................. 4
   2    General Information ........................................................................................................................................................................ 5
       2.1            Test standard/s ................................................................................................................................................................ 5
       2.2            Test Environment............................................................................................................................................................. 5
       2.3            Test Laboratories ............................................................................................................................................................. 5
       2.4            Applicant and Manufacturer .......................................................................................................................................... 6
       2.5            Application details............................................................................................................................................................ 6
   3    Test Summary .................................................................................................................................................................................. 6
   4    Description of the Equipment under Test (EUT) ...................................................................................................................... 8
       4.1            General Description ........................................................................................................................................................ 8
       4.2            EUT Identity ...................................................................................................................................................................... 8
       4.3            Technical Description ................................................................................................................................................... 10
   5    General Test Conditions / Configurations ................................................................................................................................ 12
       5.1            Test Modes ..................................................................................................................................................................... 12
       5.2            EUT Configurations ....................................................................................................................................................... 12
       5.3            Antenna requirements .................................................................................................................................................. 14
       5.4            Description of tests ........................................................................................................................................................ 15
       5.5            Test Setups ..................................................................................................................................................................... 17
       5.6            Test Conditions .............................................................................................................................................................. 18
   6    Main Test Instruments .................................................................................................................................................................. 21
       6.1            Current Test Project/Report ........................................................................................................................................ 21
   7    Measurement Uncertainty ........................................................................................................................................................... 22
   8    Appendixes ..................................................................................................................................................................................... 22




Report No.: SYBH(Z-RF)                                            Huawei Proprietary and Confidential                                                                                       Page 4 of 22
20190401017001-2004                                            Copyright © Huawei Technologies Co., Ltd.


           RF Report for ELE-L04m                                                                 Public




   2     General Information

   2.1    Test standard/s


                                     47 CFR FCC Part 2, Subpart J
                                     47 CFR FCC Part 15, Subpart C
   Applied Rules :
                                     ISED RSS-Gen Issue 5
                                     ISED RSS-247 Issue2
                                     FCC KDB 558074 D01 DTS Meas Guidance v05r01
                                     FCC KDB 662911 D01 Multiple Transmitter Output v02r01
   Test Method :
                                     ANSI C63.10-2013, American National Standard for Testing Unlicensed
                                     Wireless Devices.


   2.2    Test Environment
   Temperature :                      TN       15 to 30      °C during room temperature tests
   Ambient Relative Humidity:         25 to 75 %
   Atmospheric Pressure:            Not applicable
   Power supply :                     VN     3.8              V    DC by Battery

   NOTE 1: 1) VN= nominal voltage, VL= low extreme test voltage, VH= High extreme test voltage;

            TN= normal temperature, TL= low extreme test temperature, TH= High extreme test temperature.

   NOTE 2: The values used in the test report may be stringent than the declared.


   2.3    Test Laboratories


                                     RELIABILITY LABORATORY OF HUAWEI TECHNOLOGIES CO.,
   Test Location 1 :
                                     LTD.
                                     No.2, New City Avenue, Songshan Lake Sci. & Tech. Industry Park,
   Address of Test Location 1 :
                                     Dongguan, 523808, P.R.C




Report No.: SYBH(Z-RF)                 Huawei Proprietary and Confidential                          Page 5 of 22
20190401017001-2004                 Copyright © Huawei Technologies Co., Ltd.


           RF Report for ELE-L04m                                                                       Public




   2.4     Applicant and Manufacturer


   Company Name :                       HUAWEI TECHNOLOGIES CO., LTD
                                        Administration Building, Headquarters of Huawei Technologies Co., Ltd.,
   Address :
                                        Bantian, Longgang District, Shenzhen, 518129, P.R.C


   2.5     Application details


   Date of Receipt Sample:              2019-04-15
   Start of test:                       2019-04-16
   End of test:                         2019-04-30



   3     Test Summary


                         FCC Rule         ISED Rule                              Test
   Test Item                                            Requirements                          Verdict     Testing
                         No.              No.                                    Result
                                                                                                         location
                                                                                                           Test
   DTS (6 dB)                             RSS-247,                               Appendix
                         15.247(a)(2)                   ≥ 500 kHz.                            Pass       Location
   Bandwidth                              5.2                                        A
                                                                                                             1
                                          RSS-247,
                                                                                                           Test
   Occupied                               5.2                                    Appendix
                         ---                            No limit                              Pass       Location
   Bandwidth                              RSS-Gen,                                   B
                                                                                                             1
                                          6.7
                         KDB                                                                               Test
                                                                                 Appendix
   Duty Cycle            558074 D01       --            No limit                              Pass       Location
                                                                                     C
                         (6.0)                                                                               1
                                                        FCC: For directional
                                                        gain: Conducted < 30
                                                        dBm – (G[dBi] – 6
                                                                                                           Test
   Maximum Average                        RSS-247,      [dB]); Otherwise:        Appendix
                         15.247(b)(3)                                                         Pass       Location
   Output Power                           5.4           Conducted < 30 dBm,          D
                                                                                                             1
                                                        ISED: Conducted < 30
                                                        dBm.
                                                        EIRP< 36 dBm,
   Maximum Power                                                                                           Test
                                          RSS-247,      Conducted < 8 dBm/3      Appendix
   Spectral Density      15.247(e)                                                            Pass       Location
                                          5.2           kHz.                         E
   Level                                                                                                     1
   Band Edges                                           < -30 dBr/100 kHz if                               Test
                                          RSS-247,                               Appendix
   Compliance            15.247(d)                      total average power ≤                 Pass       Location
                                          5.5                                        F
                                                        power limit.                                         1



Report No.: SYBH(Z-RF)                  Huawei Proprietary and Confidential                               Page 6 of 22
20190401017001-2004                  Copyright © Huawei Technologies Co., Ltd.


           RF Report for ELE-L04m                                                                       Public



                         FCC Rule       ISED Rule                                  Test
   Test Item                                           Requirements                           Verdict     Testing
                         No.            No.                                        Result
                                                                                                         location
   Unwanted
                                                                                                           Test
   Emissions into                                                                  Appendix
                                                                                              Pass       Location
   Non-Restricted                                                                     G
                                                                                                             1
   Frequency Bands

   NOTE 1: According to KDB 558074 D01, antenna-port conducted measurements are acceptable as an
   alternative to radiated measurements for demonstrating compliance to the limits in the restricted frequency
   bands. If conducted measurements are performed, then proper impedance matching must be ensured and
   an additional radiated test for cabinet/case emissions will also be required.
   NOTE2: The transmitter has an integral PCB loop antenna that is enclosed within the housing of the EUT
   and meets the requirements of FCC 15.203




Report No.: SYBH(Z-RF)                  Huawei Proprietary and Confidential                               Page 7 of 22
20190401017001-2004                  Copyright © Huawei Technologies Co., Ltd.


             RF Report for ELE-L04m                                                                          Public




   4       Description of the Equipment under Test (EUT)

   4.1      General Description

   ELE-L04m is subscriber equipment in the GSM/WCDMA/LTE system. The GSM frequency band includes GSM850
   and GSM900 and DCS1800 and PCS1900.The UMTS frequency band is B1 and B2 and B4 and B5 and B6 and B8
   and B19. The ELE-L04m LTE frequency band is B1 and B2 and B3 and B4 and B5 and B6 and B7 and B8 and B9 and
   B12 and B17 and B18 and B19 and B20 and B26 and B28 and B34 and B38 and B39 and B41 and B66. The
   ELE-L04m LTE frequency band for intra-band carrier aggregation uplink operation band is CA_1C and CA_3C and
   CA_7C and CA_38C and CA_39C and CA_41C. The Mobile Phone implements such functions as RF signal
   receiving/transmitting LTE/HSPA/UMTS and GSM/GPRS/EDGE protocol processing, voice, video MMS service, GPS,
   AGPS and WIFI etc. Externally it provides one micro SD card interface, earphone port (to provide voice service) and
   one SIM card interface. ELE-L04m is single SIM smart phone. It also provides Bluetooth module to synchronize data
   between a PC and the phone, or to use the built-in modem of the phone to access the Internet with a PC, or to
   exchange data with other Bluetooth devices.
   Note: Only 2.4G WIFI test data included in this report.


   4.2      EUT Identity

   NOTE:        Unless otherwise noted in the report, the functional boards installed in the units shall be
                selected from the below list, but not means all the functional boards listed below shall be
                installed in one unit.


   4.2.1     Board


                                                          Board
                Description                         Software Version                       Hardware Version
                Main Board                  5.0.1.130(SP3C792E1R1P11)                          HL3ELLEM


   4.2.2     Sub- Assembly


                                                        Sub-Assembly
   Sub-Assembly
                           Model                 Manufacturer              Description
   Name
                                                                       Input voltage: 100V-240V~50/60Hz, 0.75A
                                            Huawei Technologies
   Adapter            HW-050450B00                                     Output voltage: 5V             2A OR4.5V
                                            Co., Ltd.
                                                                                       5A OR 5V       4.5A
                                                                       Input voltage: 100V-240V~50/60Hz, 0.75A
                                            Huawei Technologies
   Adapter            HW-050450E00                                     Output voltage: 5V             2A OR4.5V
                                            Co., Ltd.
                                                                                       5A OR 5V       4.5A
                                                                       Input voltage: 100V-240V~50/60Hz, 0.75A
                                            Huawei Technologies
   Adapter            HW-050450U00                                     Output voltage: 5V             2A OR4.5V
                                            Co., Ltd.
                                                                                5A OR 5V             4.5A


Report No.: SYBH(Z-RF)                      Huawei Proprietary and Confidential                                Page 8 of 22
20190401017001-2004                      Copyright © Huawei Technologies Co., Ltd.


             RF Report for ELE-L04m                                                                Public


                                                     Sub-Assembly
   Sub-Assembly
                          Model              Manufacturer              Description
   Name
                                                                   Input voltage: 100V-240V~50/60Hz, 0.75A
                                         Huawei Technologies
   Adapter            HW-050450A00                                 Output voltage: 5V        2A OR4.5V
                                         Co., Ltd.
                                                                            5A OR 5V        4.5A
                                                                   Input voltage: 100V-240V~50/60Hz, 0.75A
                                         Huawei Technologies
   Adapter            HW-050450E01                                 Output voltage: 5V        2A OR4.5V
                                         Co., Ltd.
                                                                            5A OR 5V        4.5A
                                                                   Input voltage: 100V-240V~50/60Hz, 0.75A
                                         Huawei Technologies
   Adapter            HW-050450A01                                 Output voltage: 5V        2A OR4.5V
                                         Co., Ltd.
                                                                           5A OR 5V        4.5A
                                                                   Rated capacity: 3550mAh mAh

                                         Huawei Technologies       Nominal Voltage:      +3.85V
   Battery            HB436380ECW
                                         Co., Ltd.
                                                                   Charging Voltage:      +4.43V


   4.2.3     Wireless charging case

       Wireless charging case               C-ELE Wireless charging case
       Manufacturer                         Huawei Technologies Co., Ltd.
       Wireless charging power              10W max
       Connector rating                     5A max
      Rated operating voltage               9V
       Charging efficiency                  >75%
       Operating temperature                -10 ℃~40 ℃
       Storage temperature                  -40 ℃~70℃




Report No.: SYBH(Z-RF)                   Huawei Proprietary and Confidential                         Page 9 of 22
20190401017001-2004                   Copyright © Huawei Technologies Co., Ltd.


           RF Report for ELE-L04m                                                                        Public




   4.3    Technical Description

   NOTE:        For the detailed technical descriptions, see the applicant/manufacturer’s specifications or user
                manual.
   Characteristics        Description
   IEEE 802.11                802.11b (20 MHz channel bandwidth),                802.11g (20 MHz channel bandwidth)
   WLAN Mode                  802.11n (20 MHz channel bandwidth),                802.11n (40 MHz channel bandwidth)
   Supported
   TX/RX Operating        2412-2462           fc = 2407 MHz + N * 5 MHz, where:
   Range                    MHz band          -       fc = “Operating Frequency” in MHz,
                                              -       N = “Channel Number” with the range from 1 to 11 for the 20
                                                      MHz channel bandwidth, or 3 to 9 for the 40 MHz channel
                                                      bandwidth.
   Data Rate              802.11b             1 Mbps, 2 Mbps, 5.5 Mbps, 11 Mbps
                          802.11g             6 Mbps, 9 Mbps, 12 Mbps, 18 Mbps, 24 Mbps, 36 Mbps, 48 Mbps,
                                              54 Mbps
                          802.11g CDD         6 Mbps, 9 Mbps, 12 Mbps, 18 Mbps, 24 Mbps, 36 Mbps, 48 Mbps,
                                              54 Mbps
                          802.11n             MCS 0 to MCS 7
                          (SISO)
                          802.11n             MCS 8 to MCS 15
                          (MIMO)
   Modulation Type        DBPSK/DQPSK/CCK (DSSS), BPSK/QPSK/16QAM/64QAM (OFDM).
   Emission               11M8G7D (for 802.11b mode), 16M7G7D (for 802.11g mod), 17M6G7D (for
   Designator             802.11n20 mode), 36M9G7D (for 802.11n40 mode)
   TX Power Control           Supported,          Not Supported
   Standby Mode               Supported,          Not Supported
   Equipment Type             Stand-alone equipment,          Plug-in radio device,        Combined equipment
   Antenna                Description         Isotropic Antenna
                          Type                     Integral (permanent fixed antenna, which may be built-in,

                                              designed as an indispensable part of EUT)
                                                   Dedicated (removable antenna supplied with EUT, designed as
                                              an indispensable part of EUT)
                          Ports                    Ant 1,     Ant 2,     Ant 3
                          Smart System             SISO (for 802.11b/g/n),
                                                   CDD (for 802.11g), 2 Tx & 2 Rx,
                                                   MIMO (for 802.11n), 2 Tx & 2 Rx,
                                                   Diversity (for 802.11b/g) :         Tx &       Rx
                          Gain                Ant 1: -2.56 dBi (per antenna port, max.)
                                              Ant 2: -7.17 dBi (per antenna port, max.)
                          Remark              When the EUT is put into service, the practical maximum antenna



Report No.: SYBH(Z-RF)                     Huawei Proprietary and Confidential                            Page 10 of 22
20190401017001-2004                     Copyright © Huawei Technologies Co., Ltd.


           RF Report for ELE-L04m                                                                   Public


   Characteristics       Description
                                             gain should NOT exceed the value as described above.
   Power Supply          Type                   External DC mains,

                                                Battery,

                                                AC/DC Adapter,

                                                Powered over Ethernet (PoE).

                                                USB

                                                Other_____




Report No.: SYBH(Z-RF)                    Huawei Proprietary and Confidential                        Page 11 of 22
20190401017001-2004                    Copyright © Huawei Technologies Co., Ltd.


             RF Report for ELE-L04m                                                                     Public




   5       General Test Conditions / Configurations

   5.1      Test Modes

   NOTE:       Worst cases for each IEEE 802.11 mode are selected to perform tests.


   Test Mode          Test Modes Description
   11B                IEEE 802.11b with data rate of 1 Mbps using SISO mode.
   11G                IEEE 802.11g with data rate of 6 Mbps using SISO mode.
   11G CDD            IEEE 802.11g with data rate of 6 Mbps using CDD mode.
   11N20              IEEE 802.11n with data date of MCS0 and bandwidth of 20 MHz using SISO mode.
   11N20m             IEEE 802.11n with data date of MCS8 and bandwidth of 20 MHz using MIMO mode.
   11N40              IEEE 802.11n with data date of MCS0 and bandwidth of 40 MHz using SISO mode.
   11N40m             IEEE 802.11n with data date of MCS8 and bandwidth of 40 MHz using MIMO mode.


   5.2      EUT Configurations

   5.2.1     General Configurations


   Configuration               Description
   Test Antenna Ports          Until otherwise specified,
                               -      All TX tests are performed at all TX antenna ports of the EUT, and
                               -      All RX tests are performed at all RX antenna ports of the EUT.
   Multiple RF Sources         Other than the tested RF source of the EUT, other RF source(s) are disabled or
                               shutdown during measurements.
   Sensors and Antenna         Sensors and Antenna optimization function should be disabled during testing by
                               software method to get the stable maximum power and avoid the influence of
                               uncertain conditions


   5.2.2     Customized Configurations


             Test Mode                     Antenna Port                 Power Conf.,          Duty cycle [%]
                                                                          CH1: 16.0                  99.92
                11B                             Ant 1
                                                                         Others: 17.5
                                                                          CH1: 16.0                  99.92
                11B                             Ant 2
                                                                         Others: 17.0
                                                                         CH1/11: 10.0                99.19
                11G                             Ant 1
                                                                         Others: 16.5
                                                                         CH1/11: 10.0                99.19
                11G                             Ant 2
                                                                         Others: 16.0
                                                                         CH1/11: 13.0                99.19
             11G_CDD                         Ant 1+Ant 2
                                                                         Others: 19.3



Report No.: SYBH(Z-RF)                     Huawei Proprietary and Confidential                             Page 12 of 22
20190401017001-2004                     Copyright © Huawei Technologies Co., Ltd.


           RF Report for ELE-L04m                                                      Public


                                                                    CH1/11: 10.0    99.12
             11N20                         Ant 1
                                                                    Others: 15.5
                                                                    CH1/11: 10.0    99.12
             11N20                         Ant 2
                                                                    Others: 15.0
                                                                    CH1/11: 13.0    98.3
            11N20M                     Ant 1+ Ant 2
                                                                    Others: 18.3
                                                                      CH3: 7.5      97.24
             11N40                         Ant 1                    CH4/5/6: 15.5
                                                                    CH7/8/9: 6.5
                                                                      CH3: 7.5      97.32
             11N40                         Ant 2                    CH4/5/6: 15.5
                                                                    CH7/8/9: 6.5
                                                                      CH3: 10.5     95.12
            11N40M                     Ant 1+ Ant 2                 CH4/5/6: 18.3
                                                                    CH7/8/9: 9.5




Report No.: SYBH(Z-RF)                 Huawei Proprietary and Confidential              Page 13 of 22
20190401017001-2004                 Copyright © Huawei Technologies Co., Ltd.


           RF Report for ELE-L04m                                                                    Public




   5.3    Antenna requirements

   Excerpt from §15.203 of the FCC Rules/Regulations:
   “An intentional radiator antenna shall be designed to ensure that no antenna other than that furnished by
   the responsible party can be used with the device. The use of a permanently attached antenna or of an
   antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with
   the provisions of this section.”


   The antennas of the ELE-L04m are permanently attached.
   There are no provisions for connection to an external antenna.


   Conclusion:
   The EUT FCC ID: QISELE-L04M unit complies with the requirement of §15.203.
   Ch. Frequency (MHz)


                                            Ch.              Frequency (MHz)
                                            01                      2412


                                             .                        .
                                             .                        .


                                            06                      2437
                                             .                        .
                                             .                        .
                                            11                      2462



                                          Frequency/ Channel Operations




Report No.: SYBH(Z-RF)                   Huawei Proprietary and Confidential                          Page 14 of 22
20190401017001-2004                   Copyright © Huawei Technologies Co., Ltd.


           RF Report for ELE-L04m                                                                           Public




   5.4     Description of tests

   5.4.1 Bandwidth measurement
   (a) Connect EUT test port to spectrum analyzer.
   (b) Set the EUT to transmit maximum output power at 2.4GHz, then set the measured frequency
   number and test the bandwidth with spectrum analyzer.

   5.4.2 Average output power
   (a) Connect EUT test port to spectrum analyzer.
   (b) Set the EUT to transmit maximum output power at 2.4GHz.
   (c) Then set the EUT to transmit at high, middle and low frequency and measure the conducted output
   power separately.

   5.4.3 Band edge spurious emission
   (a) Connect EUT test port to spectrum analyzer
   (b) Set the EUT to transmit maximum output power at 2.4GHz.
   (c) Then set the EUT to transmit at high, low frequency and measure the conducted band edge
   spurious separately.

   5.4.4 Conducted RF spurious
   (a) Connect EUT test port to spectrum analyzer
   (b) Set the EUT to transmit maximum output power at 2.4GHz.
   (c) Then set the EUT to transmit at high, middle and low frequency and measure the conducted
   spurious separately.

   5.4.5    Power spectral density
   (a) Connect EUT test port to spectrum analyzer
   (b) Set the EUT to transmit maximum output power at 2.4GHz.
   (c) Then set the EUT to transmit at high, middle and low frequency and measure the conducted power spectral density.


   5.4.6 Radiated spurious emission & spurious in restricted band
   For frequency below 1GHz, the test site semi-anechoic chamber has met the requirement of NSA
   tolerance 4dB according to the standards: ANSI C63.10 (2013). The EUT was set-up on insulator
   80cm above the Ground Plane. For frequency above 1GHz, the test site full-anechoic chamber has
   met the requirement of ANSI C63.10 (2013). The EUT was set-up on insulator 150cm above the
   Ground Plane.
   The set-up and test methods were according to ANSI C63.10:2013.The Radiated Disturbance
   measurements were made using a Rohde and Schwarz Test Receiver and control software.

   A preliminary scan and a final scan of the emissions were made by using test script of software; the
   emissions were measured using a Quasi-Peak Detector below 1GHz, Peak Detector and AV Detector
   above 1GHz. The maximal emission value was acquired by adjusting the antenna height, polarisation
   and turntable azimuth in accordance with the software setup. Normally, the height range of antenna



Report No.: SYBH(Z-RF)                    Huawei Proprietary and Confidential                                Page 15 of 22
20190401017001-2004                    Copyright © Huawei Technologies Co., Ltd.


           RF Report for ELE-L04m                                                                 Public


   was 1m to 4m,and the azimuth range of turntable was 0°to 360°. The receive antenna has two
   polarizations V and H.

   A portable or small unlicensed wireless device shall be placed on a non-metallic test fixture or other
   nonmetallic support during testing. The supporting fixture shall permit orientation of the EUT in each of
   three orthogonal (x, y, z) axis positions such that emissions from the EUT are maximized.

   The EUT communicates with the BTS simulator through Air interface. The EUT operated on the
   typical channel.

   Measurement bandwidth: 30 MHz – 1000 MHz: 120 kHz
   Measurement bandwidth: 1000 MHz – 10th Carrier Frequency:          1 MHz

   5.4.7 Conducted Emission at Power Port
   The Table-top EUT was placed upon a non-metallic table 0.8 m above the horizontal metal reference
   ground plane. EUT was connected to LISN and LISN was connected to reference Ground Plane. EUT
   was 80cm from LISN. The set-up and test methods were according to ANSI C63.10: 2013.

   Conducted Disturbance at AC Port measurements were undertaken on the L and N Lines. The
   emissions were measured using a Quasi-Peak Detector and Average Detector.

   The EUT communicates with the BTS simulator through Air interface, the BTS simulator controls the
   Wireless Modem to transmitter the maximum power which defined in specification of product. The
   Wireless Modem operated on the typical channel.

   Measurement bandwidth (RBW) for 150kHz to 30 MHz: 9 kHz;




Report No.: SYBH(Z-RF)                 Huawei Proprietary and Confidential                         Page 16 of 22
20190401017001-2004                 Copyright © Huawei Technologies Co., Ltd.


             RF Report for ELE-L04m                                                                         Public




   5.5      Test Setups

   5.5.1     Test Setup 1

   The WLAN component’s antenna ports(s) of the EUT are connected to the measurement instrument per an appropriate
   attenuator. The EUT is controlled by PC/software to emit the specified signals for the purpose of measurements.



                                         Jumper Cable for
                                      connecting to RF Cables
                                           (If applicable)              RF Cables
                                                                        for testing

         EUT                                                           Attenuator
                             WLAN                                                                Measurement
                           Component                                                              Instrument


                                                         WLAN
                                                      component's
                                                     antenna port(s)


           Power      Control
           Supply      PC




Report No.: SYBH(Z-RF)                     Huawei Proprietary and Confidential                                Page 17 of 22
20190401017001-2004                     Copyright © Huawei Technologies Co., Ltd.


           RF Report for ELE-L04m                                                                    Public




   5.6     Test Conditions


   Test Case             Test Conditions
                         Configuration             Description
   DTS (6 dB)            Measurement Method        FCC KDB 558074 D01 §8.2 Option 2.
   Bandwidth             Test Environment          TN/VN
                         Test Setup                Test Setup 1
                         EUT Configuration         11B_L@Ant1, 11B_L@Ant2, 11B_M@Ant1, 11B_M@Ant2,
                                                   11B_H@Ant1, 11B_H@Ant2,
                                                   11G_L@Ant1, 11G_L@Ant2, 11G_M@Ant1, 11G_M@Ant2,
                                                   11G_H@Ant1, 11G_H@Ant2,
                                                   11G_CDD_L@Ant1, 11G_CDD _L@Ant2, 11G_CDD _M@Ant1,
                                                   11G_CDD _M@Ant2, 11G_CDD _H@Ant1, 11G_CDD _H@Ant2,
                                                   11N20_L@Ant1, 11N20_L@Ant2, 11N20_M@Ant1, 11N20_M@Ant2,
                                                   11N20_H@Ant1, 11N20_H@Ant2,
                                                   11N20m_L@Ant1, 11N20m_L@Ant2, 11N20m_M@Ant1,
                                                   11N20m_M@Ant2, 11N20m_H@Ant1, 11N20m_H@Ant2,
                                                   11N40_L@Ant1, 11N40_L@Ant2, 11N40_M@Ant1, 11N40_M@Ant2,
                                                   11N40_H@Ant1, 11N40_H@Ant2,
                                                   11N40m_L@Ant1, 11N40m_L@Ant2, 11N40m_M@Ant1,
                                                   11N40m_M@Ant2, 11N40m_H@Ant1, 11N40m_H@Ant2,
   Occupied              Measurement Method        FCC KDB 558074 D01 §8.2 Option 2.
   Bandwidth             Test Environment          TN/VN
                         Test Setup                Test Setup 1
                         EUT Configuration         11B_L@Ant1, 11B_L@Ant2, 11B_M@Ant1, 11B_M@Ant2,
                                                   11B_H@Ant1, 11B_H@Ant2,
                                                   11G_L@Ant1, 11G_L@Ant2, 11G_M@Ant1, 11G_M@Ant2,
                                                   11G_H@Ant1, 11G_H@Ant2,
                                                   11G_CDD_L@Ant1, 11G_CDD _L@Ant2, 11G_CDD _M@Ant1,
                                                   11G_CDD _M@Ant2, 11G_CDD _H@Ant1, 11G_CDD _H@Ant2,
                                                   11N20_L@Ant1, 11N20_L@Ant2, 11N20_M@Ant1, 11N20_M@Ant2,
                                                   11N20_H@Ant1, 11N20_H@Ant2,
                                                   11N20m_L@Ant1, 11N20m_L@Ant2, 11N20m_M@Ant1,
                                                   11N20m_M@Ant2, 11N20m_H@Ant1, 11N20m_H@Ant2,
                                                   11N40_L@Ant1, 11N40_L@Ant2, 11N40_M@Ant1, 11N40_M@Ant2,
                                                   11N40_H@Ant1, 11N40_H@Ant2,
                                                   11N40m_L@Ant1, 11N40m_L@Ant2, 11N40m_M@Ant1,
                                                   11N40m_M@Ant2, 11N40m_H@Ant1, 11N40m_H@Ant2,
   Maximum               Measurement Method        FCC KDB 558074 D01 §8.3.2.2
   Conducted             Test Environment          TN/VN
   Average Output        Test Setup                Test Setup 1
   Power                 EUT Configuration         11B_L@Ant1, 11B_L@Ant2, 11B_M@Ant1, 11B_M@Ant2,
                                                   11B_H@Ant1, 11B_H@Ant2,


Report No.: SYBH(Z-RF)                        Huawei Proprietary and Confidential                     Page 18 of 22
20190401017001-2004                        Copyright © Huawei Technologies Co., Ltd.


           RF Report for ELE-L04m                                                                    Public


   Test Case             Test Conditions
                         Configuration             Description
                                                   11G_L@Ant1, 11G_L@Ant2, 11G_M@Ant1, 11G_M@Ant2,
                                                   11G_H@Ant1, 11G_H@Ant2,
                                                   11G_CDD_L@Ant1, 11G_CDD _L@Ant2, 11G_CDD _M@Ant1,
                                                   11G_CDD _M@Ant2, 11G_CDD _H@Ant1, 11G_CDD _H@Ant2,
                                                   11N20_L@Ant1, 11N20_L@Ant2, 11N20_M@Ant1, 11N20_M@Ant2,
                                                   11N20_H@Ant1, 11N20_H@Ant2,
                                                   11N20m_L@Ant1, 11N20m_L@Ant2, 11N20m_M@Ant1,
                                                   11N20m_M@Ant2, 11N20m_H@Ant1, 11N20m_H@Ant2,
                                                   11N40_L@Ant1, 11N40_L@Ant2, 11N40_M@Ant1, 11N40_M@Ant2,
                                                   11N40_H@Ant1, 11N40_H@Ant2,
                                                   11N40m_L@Ant1, 11N40m_L@Ant2, 11N40m_M@Ant1,
                                                   11N40m_M@Ant2, 11N40m_H@Ant1, 11N40m_H@Ant2,
   Maximum Power         Measurement Method        FCC KDB 558074 D01 §8.4
   Spectral Density      Test Environment          TN/VN
   Level                 Test Setup                Test Setup 1
                         EUT Configuration         11B_L@Ant1, 11B_L@Ant2, 11B_M@Ant1, 11B_M@Ant2,
                                                   11B_H@Ant1, 11B_H@Ant2,
                                                   11G_L@Ant1, 11G_L@Ant2, 11G_M@Ant1, 11G_M@Ant2,
                                                   11G_H@Ant1, 11G_H@Ant2,
                                                   11G_CDD_L@Ant1, 11G_CDD _L@Ant2, 11G_CDD _M@Ant1,
                                                   11G_CDD _M@Ant2, 11G_CDD _H@Ant1, 11G_CDD _H@Ant2,
                                                   11N20_L@Ant1, 11N20_L@Ant2, 11N20_M@Ant1, 11N20_M@Ant2,
                                                   11N20_H@Ant1, 11N20_H@Ant2,
                                                   11N20m_L@Ant1, 11N20m_L@Ant2, 11N20m_M@Ant1,
                                                   11N20m_M@Ant2, 11N20m_H@Ant1, 11N20m_H@Ant2,
                                                   11N40_L@Ant1, 11N40_L@Ant2, 11N40_M@Ant1, 11N40_M@Ant2,
                                                   11N40_H@Ant1, 11N40_H@Ant2,
                                                   11N40m_L@Ant1, 11N40m_L@Ant2, 11N40m_M@Ant1,
                                                   11N40m_M@Ant2, 11N40m_H@Ant1, 11N40m_H@Ant2,
   Band Edges            Measurement Method        FCC KDB 558074 D01 §8.7
   Compliance            Test Environment          TN/VN
                         Test Setup                Test Setup 1
                         EUT Configuration         11B_L@Ant1, 11B_L@Ant2, 11B_H@Ant1, 11B_H@Ant2,
                                                   11G_L@Ant1, 11G_L@Ant2, 11G_H@Ant1, 11G_H@Ant2,
                                                   11G_CDD_L@Ant1, 11G_CDD _L@Ant2, 11G_CDD _H@Ant1,
                                                   11G_CDD _H@Ant2,
                                                   11N20_L@Ant1, 11N20_L@Ant2, 11N20_H@Ant1, 11N20_H@Ant2,
                                                   11N20m_L@Ant1,11N20m_L@Ant2,11N20m_H@Ant1,11N20m_H@A
                                                   nt2,
                                                   11N40_L@Ant1, 11N40_L@Ant2, 11N40_H@Ant1, 11N40_H@Ant2,
                                                   11N40m_L@Ant1,11N40m_L@Ant2,11N40m_H@Ant1,11N40m_H@A
                                                   nt2,



Report No.: SYBH(Z-RF)                        Huawei Proprietary and Confidential                     Page 19 of 22
20190401017001-2004                        Copyright © Huawei Technologies Co., Ltd.


           RF Report for ELE-L04m                                                                         Public


   Test Case             Test Conditions
                         Configuration             Description
   Unwanted              Measurement Method        FCC KDB 558074 D01 §8.5
   Emissions into        Test Environment          TN/VN
   Non-Restricted        Test Setup                Test Setup 1
   Frequency Bands       EUT Configuration         11B_L@Ant1,      11B_L@Ant2,        11B_M@Ant1,      11B_M@Ant2,
                                                   11B_H@Ant1, 11B_H@Ant2,
                                                   11G_L@Ant1,      11G_L@Ant2,        11G_M@Ant1,      11G_M@Ant2,
                                                   11G_H@Ant1, 11G_H@Ant2,
                                                   11G_CDD_L@Ant1, 11G_CDD _L@Ant2, 11G_CDD _M@Ant1,
                                                   11G_CDD _M@Ant2, 11G_CDD _H@Ant1, 11G_CDD _H@Ant2,
                                                   11N20_L@Ant1, 11N20_L@Ant2, 11N20_M@Ant1, 11N20_M@Ant2,
                                                   11N20_H@Ant1, 11N20_H@Ant2,
                                                   11N20m_L@Ant1,           11N20m_L@Ant2,           11N20m_M@Ant1,
                                                   11N20m_M@Ant2, 11N20m_H@Ant1, 11N20m_H@Ant2,
                                                   11N40_L@Ant1, 11N40_L@Ant2, 11N40_M@Ant1, 11N40_M@Ant2,
                                                   11N40_H@Ant1, 11N40_H@Ant2,
                                                   11N40m_L@Ant1, 11N40m_L@Ant2, 11N40m_M@Ant1,
                                                   11N40m_M@Ant2, 11N40m_H@Ant1, 11N40m_H@Ant2,




Report No.: SYBH(Z-RF)                        Huawei Proprietary and Confidential                          Page 20 of 22
20190401017001-2004                        Copyright © Huawei Technologies Co., Ltd.


           RF Report for ELE-L04m                                                                 Public




   6     Main Test Instruments

   6.1    Current Test Project/Report
   Main Test Equipments(BT/WIFI test system)

   Equipment Name                Manufacturer Model           Serial Number      Cal Date     Cal-Due
   DC Power Supply               KEITHLEY      2303           1342896            2018/10/24   2019/10/24
   Spectrum Analyzer             Agilent       N9030A         MY51380032         2018/07/23   2019/07/23




Report No.: SYBH(Z-RF)                  Huawei Proprietary and Confidential                        Page 21 of 22
20190401017001-2004                  Copyright © Huawei Technologies Co., Ltd.


           RF Report for ELE-L04m                                                                          Public




   7    Measurement Uncertainty

   For a 95% confidence level (k = 2), the measurement expanded uncertainties for defined systems, in accordance with
   the recommendations of ISO 17025 as following:


   Test Item                                                               Extended Uncertainty
   Transmit Output Power Data             Power [dBm]                      U = 0.39 dB
   RF Power Density, Conducted            Power [dBm]                      U = 0.64 dB
   Bandwidth                              Magnitude [kHz]                  20MHz: U=41.78kHz

                                                                           40MHz: U=82.12kHz

   Band Edge Compliance                   Disturbance Power [dBm]          U = 0.9 dB
   Spurious Emissions, Conducted          Disturbance Power [dBm]          20MHz~3.6GHz:U=0.88dB
                                                                           3.6GHz~8.4GHz:U=1.08dB
                                                                           8.4GHz~13.6GHz:U=1.24dB
                                                                           13.6GHz~22GHz:U=1.34dB
                                                                           22GHz~26.5GHz:U=1.36dB
   Frequency Stability                    Frequency Accuracy [Hz]          U=41.58Hz

   Duty Cycle                             Duty Cycle [%]                   U=±2.06 %



   8    Appendixes


                     Appendix No.                                                  Description

        SYBH(Z-RF)20190401017001-2004-A                                   Appendix for 2.4G WLAN


                                                         END




Report No.: SYBH(Z-RF)                    Huawei Proprietary and Confidential                               Page 22 of 22
20190401017001-2004                    Copyright © Huawei Technologies Co., Ltd.



Document Created: 2019-05-15 10:27:05
Document Modified: 2019-05-15 10:27:05

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC