RF test report

FCC ID: QISANE-LX2J

Test Report

Download: PDF
FCCID_3851130

\\\// s PEAAT t m 4 — e x wi‘./g s in ibei‘k CNAS 3\\\_///’; s *= EBsA ilac—mrA & \E//é erified ’/7/_—\\\3 PeSuNe Me [aAccrEDITED) ( HUAWEI by GCTC /’//,,Im\‘\\\‘\ CNAS LO310 nlidats®® TESTING CERT #2174.01 FCC RF Test Report Product Name: Smart Phone Model Number: ANE—LX2J, HWV32 Report No.: SYBH(Z—RF)20180206036002—2001 FCC ID: QISANE—LX2J Reliability Laboratory of Huawei Technologies Co., Ltd. (Global Compliance and Testing Center of Huawei Technologies Co., Ltd) Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518

RF Test Report of ANE-LX2J, HWV32 Notice 1. The laboratory has passed the accreditation by China National Accreditation Service for Conformity Assessment (CNAS). The accreditation number is L0310. 2. The laboratory has passed the accreditation by The American Association for Laboratory Accreditation (A2LA). The accreditation number is 2174.01 3. The laboratory has been recognized by the US Federal Communications Commission (FCC) to perform compliance testing subject to the Commission's Certification rules. The Designation Number is CN1173, and the Test Firm Registration Number is 294140. 4. The laboratory has been listed by Industry Canada to perform electromagnetic emission measurements. The recognition numbers of test site are 6369A-1. 5. The laboratory (Reliability Lab of Huawei Technologies Co., Ltd) is also named “Global Compliance and Testing Center of Huawei Technologies Co., Ltd”, the both names have coexisted since 2009. 6. The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. 7. The test report is invalid if there is any evidence of erasure and/or falsification. 8. The test report is only valid for the test samples. 9. Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without prior written approval from the laboratory. Report No.: Huawei Proprietary and Confidential Page 2 of 31 SYBH(Z-RF)20180206036002-2001 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of ANE-LX2J, HWV32 Applicant: Huawei Technologies Co., Ltd. Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Date of Receipt Sample: 2018-02-23 Start Date of Test: 2018-02-24 End Date of Test: 2018-03-14 Test Result: Pass Approved by Senior 2018-03-15 Roger Zhang Engineer: Date Name Signature Prepared by: 2018-03-15 zhoulingbo Date Name Signature Report No.: Huawei Proprietary and Confidential Page 3 of 31 SYBH(Z-RF)20180206036002-2001 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of ANE-LX2J, HWV32 CONTENT 1 General Information ................................................................................................................................................ 5 1.1 Applied Standard........................................................................................................................................ 5 1.2 Test Location ............................................................................................................................................. 5 1.3 Test Environment Condition ....................................................................................................................... 5 2 Test Summary ........................................................................................................................................................ 6 2.1 Cellular Band (824-849 MHz paired with 869-894 MHz) ............................................................................ 6 2.2 PCS Band (1850-1910 MHz paired with 1930-1990 MHz) ......................................................................... 7 2.3 BRS&EBS Band (2500-2570 MHz paired with 2620-2690 MHz) ............................................................... 8 2.4 Band41 (2545-2655 MHz paired with 2545-2655 MHz) ............................................................................. 9 3 Description of the Equipment under Test (EUT) ................................................................................................... 10 3.1 General Description ................................................................................................................................. 10 3.2 EUT Identity ............................................................................................................................................. 10 3.3 Technical Specification ............................................................................................................................ 12 4 General Test Conditions / Configurations ............................................................................................................. 14 4.1 Test Modes .............................................................................................................................................. 14 4.2 Test Environment ..................................................................................................................................... 14 4.3 Test Frequency ........................................................................................................................................ 15 4.4 DESCRIPTION OF TESTS ...................................................................................................................... 19 4.5 Test Setups .............................................................................................................................................. 25 4.6 Test Conditions ........................................................................................................................................ 28 5 Main Test Instruments .......................................................................................................................................... 30 6 Measurement Uncertainty..................................................................................................................................... 31 7 Appendixes ........................................................................................................................................................... 31 Report No.: Huawei Proprietary and Confidential Page 4 of 31 SYBH(Z-RF)20180206036002-2001 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of ANE-LX2J, HWV32 1 General Information 1.1 Applied Standard Applied Rules: 47 CFR FCC Part 02 47 CFR FCC Part 22 47 CFR FCC Part 24 47 CFR FCC Part 27 Test Method: FCC KDB 971168 D01 Power Meas License Digital Systems v03 1.2 Test Location Test Location : Reliability Laboratory of Huawei Technologies Co., Ltd. Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C 1.3 Test Environment Condition Ambient Temperature: 19.5 to 25 °C Ambient Relative Humidity: 40 to 55 % Atmospheric Pressure: Not applicable Report No.: Huawei Proprietary and Confidential Page 5 of 31 SYBH(Z-RF)20180206036002-2001 Copyright © Huawei Technologies Co., Ltd.

aliz Huawer RF Test Report of ANE—LX2J, HWV32 2 Test Summary 2.1 Cellular Band (824—849 MHz paired with 869—894 MHz) Verdict Test Item FCC Rule No. Requirements Test Result . (Note1 ) Effective Isotropic; 2.1046, ( pic) § FCC: ERP < 7 W. Appendix A Pass Radiated Power §22.913 Output Data Peak—Average 9 Limits13 dB Appendix B Pass Ratio Modulation §2.1047 Digital modulation Appendix C Pass Characteristics OBW: No limit. . Bandwidth §2.1049 20. Appendix D Pass EBW : No limit. <—13 dBm/1%"EBW, in 1 MHz bands Band Edges §2.1051, L L L . . L immediately outside and adjacent to the Appendix E Pass Compliance §22.917 frequency block. Spurious h FCC: —13 dBm/100 kHz, from 9 kHz to 10 Emission at §2.1051, , . . , harmonics but outside authorized operating Appendix F Pass Antenna §22.917 frequency ranges. Terminals Field Strength of . §2.1053, . Spurious §22.917 FCC: < —13 dBm/100 kHz. Appendix G Pass Radiation ' Frequency §2.1055, . +2.5ppm. Appendix H Pass Stability §22.355 NOTE 1: For the verdict, the "N/A" denotes "not applicable", the "NT" denotes "not tested". Report No.: Huawei Proprietary and Confidential Page 6 of 31 SYBH(Z—RF)20180206036002—2001 Copyright © Huawei Technologies Co., Ltd.

s < HUAWEI RF Test Report of ANE—LX2J, HWV32 2.2 PCS Band (1850—1910 MHz paired with 1930—1990 MHz) Test Item FCC Rule Requirements Test Result Verdict No. (Note1 ) Effectwe (Isotropic) §2.1046, | Radiated Power Output EIRP < 2 W Appendix A Pass §24.232 Data Peak—Average Ratio §2.1046. Limit<13 dB Appendix B Pass §24.232 Modulation Characteristics §2.1047 Digital modulation Appendix C Pass . CBW: No limit. , Bandwidth §2.1049 EBW: No limit. Appendix D Pass <—13 dBm/1%*EBW, in 1 Band Edges Compliance §2.1051, MHz bands immediately Appendix E Pass §24.238 outside and adjacent to the frequency block. <—13 dBm/1 MHz, from 9 Spurious EmISS.IOn at §2.1051, kle to 10" hérmomcs bll,lt Appendix F Pass Antenna Terminals §24.238 outside authorized operating frequency ranges. Field Strengtlh ?f Spurious §2.1053, 13 dBm/1 MHz. Appendix G Pass Radiation §24.238 m §2.1055, L Frequency Stability §24.235 <+2.5 ppm. Appendix H Pass NOTE 1:For the verdict, the "N/A" denotes "not applicable", the "N/T" denotes "not tested". Report No.: Huawei Proprietary and Confidential Page 7 of 31 SYBH(Z—RF)20180206036002—2001 Copyright © Huawei Technologies Co., Ltd.

aliz< HUAWEI RF Test Report of ANE—LX2J, HWV32 2.3 BRS&EBS Band (2500—2570 MHz paired with 2620—2690 MHz) FCC Rule . Verdict Test Item Requirements Test Result No. (Note1 ) Effective (Isotropic) §2.1046, Radiated Power EIRP < 2W Appendix A Pass §27.50(h) Output Data Peak—Average Ratio §27.50(a) Limits13 dB Appendix B Pass Modulation 2 . . 22. §2.1047 Digital modulation Appendix C Pass Characteristics OBW: No limit. Bandwidth §2.1049 Appendix D Pass EBW: No limit. 24rEsw Channel prrcauy —?0dBm Edge —1ocBm hS as:ni‘?gfih_“ 17. —lo]:)‘gm -f.?‘a‘g’m PA N n gt——— Band Edges §2.1051, 1 1 U Eca 1 . I td Pb Appendix E Pass Compliance §27.53(md) | boag ob d 5.5MiHz 4M .. WMk uubte O~ lakte RBW22%°EBW R‘BW >2X°EBW X=Max {61(Hz, EBW Channel Edge Spurious Emission 22 §2.1051, 25 4Bm/ at Antenna _ 1 MHz Appendix F Pass . §27.53(m) E—ie—i Terminals ; 0 kHz 95 MHz XMHz 10" harmonics X=Max {6MHz, EBW} Channel Edge Field Strength of §2.1053, 25 dBm/ 25dBim/ . 1 _1 MHz 1 MHz Appendix G Pass Spurious Radiation §27.53(m) —e—i —«— 0 kHz 95 MHz XMHz 10" harmonics X=Max {6MHz, EBW} m §2.1055, Within authorized bands of . Frequency Stability . Appendix H Pass §27.54 operation/frequency block. NOTE 1: For the verdict, the "N/A" denotes "not applicable", the "N/T" denotes "not tested". Report No.: Huawei Proprietary and Confidential Page 8 of 31 SYBH(Z—RF)20180206036002—2001 Copyright © Huawei Technologies Co., Ltd.

s < HUAWEI RF Test Report of ANE—LX2J, HWV32 2.4 Band41 (2545—2655 MHz paired with 2545—2655 MHz) Test Item FCC Rule Requirements Test Result Verdict No. (Note1 ) Effective (Isotropic) EIRP < 2W Appendix A Pass §2.1046, Radiated Power §27.50(h) Output Data Peak—Average Ratio §27.50(a) FCC:Limit<13 dB Appendix B Pass Modulation 2. . : 22. §2.1047 Digital modulation Appendix C Pass Characteristics Bandwidth OBW: No limit. . §2.1049 20 Appendix D Pass EBW No limit. Band Edges . 2x»2BW Channel proegy Compllance ~10dBm Edge ~1lodBm mes®" S 3e‘ im ~10dBm —10dBm mA o y 4 §2.1051, 1 101 Poa i I td Pb d Appendix E Pass §27.53(m) | Loau ob 4 5.5MHz «n 1M,, We Ntz O—4) Mriz RGW » 2%°EBW R‘EW 220EBW X=Max [61tHz. EBW] Spurious Emission at Channal Edge Antenna Terminals §2.1051, 25dBm/ 25dBm/ _1 MHz 1 MHz _ Appendix F Pass §27.53(m) —e—] E—«— 9 kHz s5 Mbz JGUHz 10" harmonics X=Max {6MHz, EBW} i Field Strength of Channel Edge Spurious Radiation §2.1053, —25dBm/ —25dBm _1 MHz 1 MHz _ Appendix G Pass §27.53(m) —e—] E—«— 9 kHz s5 Mbz JGUHz 10" harmonics X=Max {6MHz, EBW} Frequency Stability §2.1055, Within authorized bands of . . Appendix H Pass §27.54 operation/frequency block. Report No.: Huawei Proprietary and Confidential Page 9 of 31 SYBH(Z—RF)20180206036002—2001 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of ANE-LX2J, HWV32 3 Description of the Equipment under Test (EUT) 3.1 General Description ANE-LX2J, HWV32 is subscriber equipment in the GSM/CDMA/WCDMA/LTE system. The GSM frequency band includes GSM850 and GSM900 and DCS1800 and PCS1900.The UMTS frequency band is B1 and B2 and B5 and B6 and B8 and B19. The LTE frequency band is B1 and B3 and B5 and B7 and B8 and B18 and B19 and B26 and B28 and B41. The Mobile Phone implements such functions as RF signal receiving/transmitting, LTE/HSPA/UMTS and GSM/GPRS/EDGE protocol processing, voice, video MMS service, GPS, AGPS and WIFI etc. Externally it provides one micro SD card (it can also used as SIM card interface), earphone port (to provide voice service) and one SIM card interface. ANE-LX2J, HWV32 is dual SIM smart phone. It also provides Bluetooth module to synchronize data between a PC and the phone, or to use the built-in modem of the phone to access the Internet with a PC, or to exchange data with other Bluetooth devices. Note: Only GSM850/1900&WCDMA850/1900&LTE band 7 /5/41 test data included in this report. 3.2 EUT Identity NOTE: Unless otherwise noted in the report, the functional boards installed in the units shall be selected from the below list, but not means all the functional boards listed below shall be installed in one unit. 3.2.1 Board Board Description Hardware Version Software Version Main Board HL3ANNEM ANE-LX2J 8.0.0.46(C900) Report No.: Huawei Proprietary and Confidential Page 10 of 31 SYBH(Z-RF)20180206036002-2001 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of ANE-LX2J, HWV32 3.2.2 Sub-Assembly Sub-Assembly Sub-Assembly Model Manufacturer Description Name Input voltage: 100-240V ~50/60Hz Huawei Technologies 0.5A Adapter HW-059200AHQ Co., Ltd. Output voltage: 5V 2A OR 9V 2A Input voltage: 100-240V ~50/60Hz Huawei Technologies 0.5A Adapter HW-059200UHQ Co., Ltd. Output voltage: 5V 2A OR 9V 2A Input voltage: 100-240V ~50/60Hz Huawei Technologies 0.5A Adapter HW-090200JHQ Co., Ltd. Output voltage: 5V 2A OR 9V 2A Input voltage: 100-240V ~50/60Hz Huawei Technologies 0.5A Adapter HW-090200UH0 Co., Ltd. Output voltage: 5V 2A OR 9V 2A Input voltage: 100-240V ~50/60Hz Huawei Technologies 0.5A Adapter HW-090200AH0 Co., Ltd. Output voltage: 5V 2A OR 9V 2A Input voltage: 100-240V ~50/60Hz Huawei Technologies 0.5A Adapter HW-090200JH0 Co., Ltd. Output voltage: 5V 2A OR 9V 2A Rated capacity: 2900mAh Li-Polymer Huawei Technologies Nominal Voltage: +3.82V HB366481ECW Battery Co., Ltd. Charging Voltage: +4.40V Report No.: Huawei Proprietary and Confidential Page 11 of 31 SYBH(Z-RF)20180206036002-2001 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of ANE-LX2J, HWV32 3.3 Technical Specification Characteristics Description Radio System Type GSM UMTS LTE Supported Frequency Range Transmission (TX): 824 to 849 MHz GSM850/ WCDMA850 Receiving (RX): 869 to 894 MHz Transmission (TX): 1850 to 1910 MHz GSM1900/ WCDMA1900 Receiving (RX): 1930 to 1990 MHz LTE BAND7 Transmission (TX): 2500 to 2570 MHz Receiving (RX): 2620 to 2690 MHz Transmission (TX): 824 to 849 MHz LTE BAND5 Receiving (RX): 869 to 894 MHz Transmission (TX): 2545 to 2655MHz LTE BAND41 Receiving (RX): 2545 to 2655 MHz TX and RX Antenna Ports TX & RX port: 1 TX-only port: 0 RX-only port: 1 Target TX Output Power GSM850: 32.5dBm GSM1900 29.7dBm UMTS850 23.5dBm UMTS1900: 23dBm LTE Band 7: 22.5dBm LTE Band 5: 22.5dBm LTE Band 41: 22.5dBm Supported Channel Bandwidth GSM system: 200 kHz UMTS system: 5 MHz LTE band 7 5MHz, 10MHz , 15MHz , 20MHz LTE band 5 1.4MHz, 3MHz, 5MHz, 10MHz LTE band 41 5MHz, 10MHz , 15MHz , 20MHz Designation of Emissions GSM850: 246KGXW, 250KG7W (Note: the necessary bandwidth of GSM1900: 245KGXW, 253KG7W which is the worst value from the UMTS850: 4M14F9W measured occupied bandwidths for UMTS1900: 4M14F9W each type of channel bandwidth LTE BAND7: 4M53G7D (5 MHz QPSK modulation), configuration.) 4M53W7D (5 MHz 16QAM modulation) 9M01G7D (10 MHz QPSK modulation), 9M03W7D (10 MHz 16QAM modulation) 13M5G7D (15 MHz QPSK modulation), 13M5W7D (15 MHz 16QAM modulation) 18M0G7D (20 MHz QPSK modulation), Report No.: Huawei Proprietary and Confidential Page 12 of 31 SYBH(Z-RF)20180206036002-2001 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of ANE-LX2J, HWV32 Characteristics Description 18M1W7D (20 MHz 16QAM modulation) LTE BAND5: 1M10G7D (1.4 MHz QPSK modulation), 1M10W7D (1.4 MHz 16QAM modulation) 2M71G7D (3 MHz QPSK modulation), 2M71W7D (3 MHz 16QAM modulation) 4M51G7D (5 MHz QPSK modulation), 4M51W7D (5 MHz 16QAM modulation) 9M00G7D (10 MHz QPSK modulation), 9M01W7D (10 MHz 16QAM modulation) LTE BAND41: 4M49G7D (5 MHz QPSK modulation), 4M49W7D (5 MHz 16QAM modulation) 8M97G7D (10 MHz QPSK modulation), 8M95W7D (10 MHz 16QAM modulation) 13M5G7D (15 MHz QPSK modulation), 13M5W7D (15 MHz 16QAM modulation) 18M0G7D (20 MHz QPSK modulation), 18M0W7D (20 MHz 16QAM modulation) Report No.: Huawei Proprietary and Confidential Page 13 of 31 SYBH(Z-RF)20180206036002-2001 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of ANE-LX2J, HWV32 4 General Test Conditions / Configurations 4.1 Test Modes NOTE: The test mode(s) are selected according to relevant radio technology specifications. Test Mode Test Modes Description GSM/TM1 GSM system, GSM/GPRS, GMSK modulation GSM/TM2 GSM system, EDGE, 8PSK modulation UMTS/TM1 WCDMA system, QPSK modulation LTE/TM1 LTE system, QPSK modulation LTE/TM2 LTE system, 16QAM modulation 4.2 Test Environment Environment Parameter Selected Values During Tests Relative Humidity Ambient Temperature TN Ambient VL 3.6V Voltage VN 3.8V VH 4.35V NOTE: VL= lower extreme test voltage VN= nominal voltage VH= upper extreme test voltage TN= normal temperature Report No.: Huawei Proprietary and Confidential Page 14 of 31 SYBH(Z-RF)20180206036002-2001 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of ANE-LX2J, HWV32 4.3 Test Frequency RF Channel Test Mode TX / RX Low (L) Middle (M) High (H) Channel 128 Channel 190 Channel 251 TX 824.2MHz 836.6MHz 848.8MHz GSM850 Channel 128 Channel 190 Channel 251 RX 869.2MHz 881.6MHz 893.8MHz Channel 4132 Channel 4182 Channel 4233 TX 826.4MHz 836.4MHz 846.6MHz WCDMA850 Channel 4357 Channel 4407 Channel 4458 RX 871.4MHz 881.4MHz 891.6MHz RF Channel Test Mode TX / RX Low (L) Middle (M) High (H) Channel 512 Channel 661 Channel 810 TX 1850.2MHz 1880.0MHz 1909.8MHz GSM1900 Channel 512 Channel 661 Channel 810 RX 1930.2 MHz 1960.0 MHz 1989.8 MHz Channel 9262 Channel9400 Channel9538 TX 1852.4MHz 1880.0MHz 1907.6MHz WCDMA1900 Channel 9662 Channel 9800 Channel 9938 RX 1932.4 MHz 1960.0 MHz 1987.6 MHz Report No.: Huawei Proprietary and Confidential Page 15 of 31 SYBH(Z-RF)20180206036002-2001 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of ANE-LX2J, HWV32 RF Channel Test Mode TX / RX Low (B) Middle (M) High (T) Channel 20775 Channel 21100 Channel 21425 TX (5M) 2502.5 MHz 2535 MHz 2567.5 MHz Channel 20800 Channel 21100 Channel 21400 TX (10M) 2505 MHz 2535 MHz 2565 MHz Channel 20825 Channel 21100 Channel 21375 TX (15M) 2507.5 MHz 2535 MHz 2562.5 MHz Channel 20850 Channel 21100 Channel 21350 TX (20M) 2510 MHz 2535 MHz 2560 MHz LTE Band 7 Channel 2775 Channel 3100 Channel 3425 RX (5M) 2622.5 MHz 2655 MHz 2687.5 MHz Channel 2800 Channel 3100 Channel 3400 RX (10M) 2625 MHz 2655 MHz 2685 MHz Channel 2825 Channel 3100 Channel 3375 RX (15M) 2627.5 MHz 2655 MHz 2682.5 MHz Channel 2850 Channel 3100 Channel 3350 RX (20M) 2630 MHz 2655 MHz 2680 MHz RF Channel Test Mode TX / RX Low (B) Middle (M) High (T) Channel 20407 Channel 20525 Channel 20643 TX(1.4M) 824.7 MHz 836.5 MHz 848.3 MHz LTE Band 5 Channel 20415 Channel 20525 Channel 20635 TX(3M) 825.5 MHz 836.5 MHz 847.5 MHz Report No.: Huawei Proprietary and Confidential Page 16 of 31 SYBH(Z-RF)20180206036002-2001 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of ANE-LX2J, HWV32 RF Channel Test Mode TX / RX Low (B) Middle (M) High (T) Channel 20425 Channel 20525 Channel 20625 TX(5M) 826.5 MHz 836.5 MHz 846.5 MHz Channel 20450 Channel 20525 Channel 20600 TX(10M) 829 MHz 836.5 MHz 844 MHz Channel 2407 Channel 2525 Channel 2643 RX(1.4M) 869.7 MHz 881.5 MHz 893.3 MHz Channel 2415 Channel 2525 Channel 2635 RX (3M) 870.5 MHz 881.5 MHz 892.5 MHz Channel 2425 Channel 2525 Channel 2625 RX(5M) 871.5 MHz 881.5 MHz 891.5 MHz Channel 2450 Channel 2525 Channel 2600 RX (10M) 874 MHz 881.5 MHz 889 MHz RF Channel Test Mode TX / RX Low (B) Middle (M) High (T) Channel 40165 Channel 40690 Channel 41215 TX(5M) 2547.5 MHz 2600 MHz 2652.5 MHz Channel 40190 Channel 40690 Channel 41190 TX(10M) 2550 MHz 2600 MHz 2650 MHz LTE Band 41 Channel 40215 Channel 40690 Channel 41165 TX(15M) 2552.5 MHz 2600 MHz 2647.5 MHz Channel 40240 Channel 40690 Channel 41140 TX(20M) 2555 MHz 2600 MHz 2645 MHz RX(5M) Channel 40165 Channel 40690 Channel 41215 Report No.: Huawei Proprietary and Confidential Page 17 of 31 SYBH(Z-RF)20180206036002-2001 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of ANE-LX2J, HWV32 RF Channel Test Mode TX / RX Low (B) Middle (M) High (T) 2547.5 MHz 2600 MHz 2652.5 MHz Channel 40190 Channel 40690 Channel 41190 RX(10M) 2550 MHz 2600 MHz 2650 MHz Channel 40215 Channel 40690 Channel 41165 RX(15M) 2552.5 MHz 2600 MHz 2647.5 MHz Channel 40240 Channel 40690 Channel 41140 RX(20M) 2555 MHz 2600 MHz 2645 MHz Report No.: Huawei Proprietary and Confidential Page 18 of 31 SYBH(Z-RF)20180206036002-2001 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of ANE-LX2J, HWV32 4.4 DESCRIPTION OF TESTS 4.4.1 Radiated Power and Radiated Spurious Emissions Radiated spurious emissions are investigated indoors in a semi-anechoic chamber to determine the frequencies producing the worst case emissions. Final measurements for radiated power and radiated spurious emissions are performed on the 3 meter OATS per the guidelines of ANSI/TIA-603-D-2010. The equipment under test was transmitting while connected to its integral antenna and is placed on a wooden turntable 80cm above the ground plane and 3 meters from the receive antenna. The spectrum is scanned from the lowest frequency generated in the equipment up to a frequency including its 10th harmonic. The receive antenna height is adjusted between 1 and 4 meter height, the turntable is rotated through 360 degrees, and the EUT is manipulated through all orthogonal planes representative of its typical use to achieve the highest reading on the receive spectrum analyzer. Emissions are also investigated with the receive antenna horizontally and vertically polarized. A portable or small unlicensed wireless device shall be placed on a non-metallic test fixture or other non-metallic support during testing. The supporting fixture shall permit orientation of the EUT in each of three orthogonal (x, y, z) axis positions such that emissions from the EUT are maximized. Measure the EUT maximum RF power and record the result. A half-wave dipole is then substituted in place of the EUT. For emissions above 3GHz, a horn antenna is substituted in place of the EUT. The substitute antenna is driven by a signal generator with the level of the signal generator being adjusted to obtain the same receive spectrum analyzer level previously recorded from the spurious emission from the EUT. The power of the emission is calculated using the following formula: Pd [dBm] = Pg [dBm] – cable loss [dB] + antenna gain [dBd/dBi] Where, Pd is the dipole equivalent power, Pg is the generator output into the substitution antenna, and the antenna gain is the gain of the substitute antenna used relative to either a half-wave dipole (dBd) or an isotropic source (dBi). The substitute level is equal to Pg [dBm] – cable loss [dB]. The calculated Pd levels are then compared to the absolute spurious emission limit of -13dBm which is equivalent to the required minimum attenuation of 43 + 10log10(Power [Watts]). Test Procedures Used KDB 971168 D01 v03-Section 5.2.2 / KDB 971168 D01 v03-Section 5.8 ANSI/TIA-603-D-2010-Section 2.2.17 / ANSI/TIA-603-D-2010-Section 2.2.12 Note: Reference test setup 3 Report No.: Huawei Proprietary and Confidential Page 19 of 31 SYBH(Z-RF)20180206036002-2001 Copyright © Huawei Technologies Co., Ltd.

aliz Huawer RF Test Report of ANE—LX2J, HWV32 4.4.2 Peak—Average Ratio A peak to average ratio measurement is performed at the conducted port of the EUT. For WCDMA signals, the spectrum analyzers Complementary Cumulative Distribution Function (CCDF) measurement profile is used to determine the largest deviation between the average and the peak power of the EUT in a given bandwidth. The CCDF curve shows how much time the peak waveform spends at or above a given average power level. The percent of time the signal spends at or above the level defines the probability for that particular power level. For GSM signals, an average and a peak trace are used on a spectrum analyzer to determine the largest deviation between the average and the peak power of the EUT in a bandwidth greater than the emission bandwidth. The traces are generated with the spectrum analyzer set to zero span mode. Test Procedures Used KDB 971168 DO1 v03—Section 5.7.2 Test Settings 1. The signal analyzer‘s CCDF measurement profile enabled 2. Frequency= carrier center frequency 3, Measurement BW > EBW of signal 4, for continuous transmissions, set to 1ms 5. Record the maximum PAPR level associated with a probability of 0.1%. Note: Reference test setup 1 Report No.: Huawei Proprietary and Confidential Page 20 of 31 SYBH(Z—RF)20180206036002—2001 Copyright © Huawei Technologies Co., Ltd.

aliz Huawer RF Test Report of ANE—LX2J, HWV32 4.4.3 Occupied Bandwidth The occupied bandwidth, that is the frequency bandwidth such that, below its lower and above its upper frequency limits, the mean powers radiated are each equal to 0.5 percent of the total mean power radiated by a given emission shall be measured. The span of the analyzer shall be set to capture all products of the modulation process, including the emission skirts. The resolution bandwidth shall be set to as close to 1 percent of the selected span as is possible without being below 1 percent. The video bandwidth shall be set to 3 times the resolution bandwidth. Video averaging is not permitted. Where practical, a sampling detector shall be used since a peak or, peak hold, may produce a wider bandwidth than actual. The trace data points are recovered and are directly summed in linear terms. The recovered amplitude data points, beginning at the lowest frequency, are placed in a running sum until 0.5 percent of the total is reached and that frequency recorded. The process is repeated for the highest frequency data points. This frequency is recorded. The span between the two recorded frequencies is the occupied bandwidth. Test Procedures Used KDB 971168 DO1 v03—Section 4.3 Test Settings 1. SET RBW=1—5% of OBW 2. SET VBW 2 3*RBW 3. Detector: Peak 4. Trace mode= max hold. 5, Sweep= auto couple 6. Steps 1—5 were repeated after it is stable Note: Reference test setup 1. Report No.: Huawei Proprietary and Confidential Page 21 of 31 SYBH(Z—RF)20180206036002—2001 Copyright © Huawei Technologies Co., Ltd.

aliz Huawer RF Test Report of ANE—LX2J, HWV32 4.4.4 Band Edge Compliance the 1 MHz bands immediately outside and adjacent to the frequency block a resolution bandwidth of at least one percent of the emission bandwidth of the fundamental emission of the transmitter may be employed. The emission power must be attenuated below the transmitting power (P) by a factor of at least 43+10log:oP dB. Test Procedures Used KDB 971168 DO1 v03—Section 6 Test Settings 1. SET RBW 2 1% of Emission BW. 2, SET VBW about three times of RBW 3. Detector: RMS 4. Trace mode= max hold. 5. Span= 2MHz Note: Reference test setup 1. Report No.: Huawei Proprietary and Confidential Page 22 of 31 SYBH(Z—RF)20180206036002—2001 Copyright © Huawei Technologies Co., Ltd.

aliz Huawer RF Test Report of ANE—LX2J, HWV32 4.4.5 Spurious and Harmonic Emissions at Antenna Terminal The level of the carrier and the various conducted spurious and harmonic frequencies is measured by means of a calibrated spectrum analyzer. The spectrum is scanned from the lowest frequency generated in the equipment up to a frequency including its 10« harmonic. On any frequency outside a licensee‘s frequency block, the power of any emission shall be attenuated below the transmitter power (P) by at least 43 + 10 log(P) dB. Compliance with these provisions is based on the use of measurement instrumentation employing a resolution bandwidth of 1 MHz or greater. However, in the 1 MHz bands immediately outside and adjacent to the frequency block a resolution bandwidth of at least one percent of the emission bandwidth of the fundamental emission of the transmitter may be employed. The emission bandwidth is defined as the width of the signal between two points, one below the carrier center frequency and one above the carrier center frequency, outside of which all emission are attenuated at least 26 dB below the transmitter power. Test Procedures Used KDB 971168 DO1 v03—Section 6 Test Settings 1. 9kHz~150kHz, RBW = 1KHz, VBW > 3X RBW, 150kHz~30MHz, RBW = 10KHz, VBW > 3X RBW, S0OMHz~1GHz, RBW = 100 kHz, VBW = 300 kHz. Above 1GHz, RBW =1 MHz, VBW =3 MHz. 2. Detector: Peak 3. Trace mode= max hold. Note: Reference test setup 1. Report No.: Huawei Proprietary and Confidential Page 23 of 31 SYBH(Z—RF)20180206036002—2001 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of ANE-LX2J, HWV32 4.4.6 Frequency Stability / Temperature Variation Frequency stability testing is performed in accordance with the guidelines of ANSI/TIA-603-D-2010. The frequency stability of the transmitter is measured by: a.) Temperature: The temperature is varied from -30°C to +50°C in 10°C increments using an environmental chamber. b.) Primary Supply Voltage: The primary supply voltage is varied from 85% to 115% of the nominal value for non hand-carried battery and AC powered equipment. For hand-carried, battery-powered equipment, primary supply voltage is reduced to the battery operating end point which shall be specified by the manufacturer. Specification – The frequency stability shall be sufficient to ensure that the fundamental emission stays within the authorized frequency block. The frequency stability of the transmitter shall be maintained within ±0.00025% (±2.5 ppm ) of the center frequency. Time Period and Procedure: 1. The carrier frequency of the transmitter is measured at room temperature (20°C to provide a reference). 2. The equipment is turned on in a “standby” condition for fifteen minutes before applying power to the transmitter. Measurement of the carrier frequency of the transmitter is made within one minute after applying power to the transmitter. 3. Frequency measurements are made at 10°C intervals ranging from -30°C to +50°C. A period of at least one half-hour is provided to allow stabilization of the equipment at each temperature level. Test Procedures Used ANSI/TIA-603-D-2010 Note: Reference test setup 2. Report No.: Huawei Proprietary and Confidential Page 24 of 31 SYBH(Z-RF)20180206036002-2001 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of ANE-LX2J, HWV32 4.5 Test Setups 4.5.1 Test Setup 1 Control EUT Wireless Computer Control Communication port(s) Antenna Power port(s) Divider Power Power Spectrum Supply port Anlyzer Report No.: Huawei Proprietary and Confidential Page 25 of 31 SYBH(Z-RF)20180206036002-2001 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of ANE-LX2J, HWV32 4.5.2 Test Setup 2 Temperature Chamber Wireless Control EUT Communication Computer Control port(s) Antenna Power port(s) Divider Power Power Spectrum Supply port Anlyzer Report No.: Huawei Proprietary and Confidential Page 26 of 31 SYBH(Z-RF)20180206036002-2001 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of ANE-LX2J, HWV32 4.5.3 Test Setup 3 NOTE: Effective radiated power (ERP) and Equivalent Isotropic Radiated Power(EIRP) refers to the radiation power output of the EUT, assuming all emissions are radiated from half-wave dipole antennas. 4.5.3.1 Step 1: Pre-test Semi- and/or Full- Anechoic Chamber Measurement Antenna Measurement EUT 3m System 4.5.3.2 Step 2: Substitution method to verify the maximum ERP/EIRP Semi- and/or Full- Anechoic Chamber Measurement Substitution Antenna Antenna Measurement 3m System Signal Generator Report No.: Huawei Proprietary and Confidential Page 27 of 31 SYBH(Z-RF)20180206036002-2001 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of ANE-LX2J, HWV32 4.6 Test Conditions Test Case Test Conditions Transmit Average Power, Test Env. Ambient Climate & Rated Voltage Output Total Test Setup Test Setup 1 Power Data RF Channels L, M, H (TX) (L= low channel, M= middle channel, H= high channel ) Test Mode GSM/TM1,GSM/TM2,UMTS/TM1,LTE/TM1,LTE/TM2 Average Power, Test Env. Ambient Climate & Rated Voltage Spectral Density Test Setup Test Setup 1 (if required) RF Channels L, M, H (TX) (L= low channel, M= middle channel, H= high channel ) Test Mode GSM/TM1,GSM/TM2,UMTS/TM1,LTE/TM1,LTE/TM2 Peak-to-Average Ratio Test Env. Ambient Climate & Rated Voltage (if required) Test Setup Test Setup 1 RF Channels L, M, H (TX) (L= low channel, M= middle channel, H= high channel ) Test Mode GSM/TM1,GSM/TM2,UMTS/TM1,LTE/TM1,LTE/TM2 Modulation Characteristics Test Env. Ambient Climate & Rated Voltage Test Setup Test Setup 1 RF Channels M (TX) (L= low channel, M= middle channel, H= high channel ) Test Mode GSM/TM1,GSM/TM2,UMTS/TM1,LTE/TM1,LTE/TM2 Bandwidth Occupied Test Env. Ambient Climate & Rated Voltage Bandwidth Test Setup Test Setup 1 RF Channels L, M, H (TX) (L= low channel, M= middle channel, H= high channel ) Test Mode GSM/TM1,GSM/TM2,UMTS/TM1,LTE/TM1,LTE/TM2 Emission Test Env. Ambient Climate & Rated Voltage Bandwidth Test Setup Test Setup 1 (if required) RF Channels L, M, H (TX) (L= low channel, M= middle channel, H= high channel ) Test Mode GSM/TM1,GSM/TM2,UMTS/TM1,LTE/TM1,LTE/TM2 Band Edges Compliance Test Env. Ambient Climate & Rated Voltage Test Setup Test Setup 1 RF Channels L, H (TX) (L= low channel, M= middle channel, H= high channel ) Test Mode GSM/TM1,GSM/TM2,UMTS/TM1,LTE/TM1,LTE/TM2 Spurious Emission at Antenna Test Env. Ambient Climate & Rated Voltage Terminals Test Setup Test Setup 1 RF Channels L, M, H (TX) (L= low channel, M= middle channel, H= high channel ) Report No.: Huawei Proprietary and Confidential Page 28 of 31 SYBH(Z-RF)20180206036002-2001 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of ANE-LX2J, HWV32 Test Case Test Conditions Test Mode GSM/TM1,GSM/TM2,UMTS/TM1,LTE/TM1,LTE/TM2 Field Strength of Spurious Test Env. Ambient Climate & Rated Voltage Radiation Test Setup Test Setup 3 Test Mode GSM/TM1,GSM/TM2,UMTS/TM1/TM2/TM3,LTE/TM1,LTE/TM2 NOTE: If applicable, the EUT conf. that has maximum power density (based on the equivalent power level) is selected. RF Channels L, M, H (TX) (L= low channel, M= middle channel, H= high channel ) Frequency Stability Test Env. (1) -30 °C to +50 °C with step 10 °C at Rated Voltage; (2) VL, VN and VH of Rated Voltage at Ambient Climate. Test Setup Test Setup 2 RF Channels L, M, H (TX) (L= low channel, M= middle channel, H= high channel ) Test Mode GSM/TM1,GSM/TM2,UMTS/TM1,LTE/TM1,LTE/TM2 Report No.: Huawei Proprietary and Confidential Page 29 of 31 SYBH(Z-RF)20180206036002-2001 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of ANE-LX2J, HWV32 5 Main Test Instruments Main Test Equipments Equipment Name Manufacturer Model Serial Number Cal Date Cal- Due Power supply KEITHLEY 2303 000500E 2017/5/31 2018/5/30 Wireless Communication Agilent N4010A MY49081592 2017/7/31 2018/7/30 Test set Universal Radio R&S CMU200 110932 2017/5/2 2018/5/1 Communication Tester Spectrum Analyzer Agilent N9020A MY52090652 2017/7/10 2018/7/9 Universal Radio R&S CMW500 126854 2017/10/19 2018/10/18 Communication Tester Signal Analyzer R&S FSQ31 200021 2017/7/31 2018/7/30 Spectrum Analyzer Agilent N9030A MY49431698 2017/7/31 2018/7/30 Spectrum Analyzer Agilent N9030B MY57140531 2017/12/19 2018/12/18 Temperature Chamber WEISS WKL64 56246002940010 2017/12/13 2018/12/12 Test receiver R&S ESU26 100387 2018/1/20 2019/1/19 Test receiver R&S ESCI 101163 2018/1/20 2019/1/19 Spectrum analyzer R&S FSU3 200474 2018/1/20 2019/1/19 Spectrum analyzer R&S FSU43 100144 2018/1/20 2019/1/19 LOOP R&S HFH2-Z2 100262 2017/4/25 2019/4/25 Antennas(9kHz-30MHz) LOOP R&S HFH2-Z2 100263 2017/4/25 2019/4/25 Antennas(9kHz-30MHz) Trilog Broadband SCHWARZBECK VULB 9163 9163-490 2017/3/29 2019/3/29 Antenna (30M~3GHz) Trilog Broadband SCHWARZBECK VULB 9163 9163-521 2017/4/9 2019/4/9 Antenna (30M~3GHz) Double-Ridged Waveguide Horn R&S HF907 100304 2017/5/27 2019/5/27 Antenna (1G~18GHz) Pyramidal Horn Antenna(18GHz-26.5GHz ETS-Lindgren 3160-09 206665 2017/3/24 2018/3/23 ) Artificial Main Network R&S ENV4200 100134 2017/5/15 2018/5/14 Line Impedance R&S ENV216 100382 2017/5/15 2018/5/14 Stabilization Network Software Information Test Item Software Name Manufacturer Version RSE EMC32 R&S V8.40.0 Report No.: Huawei Proprietary and Confidential Page 30 of 31 SYBH(Z-RF)20180206036002-2001 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of ANE-LX2J, HWV32 6 Measurement Uncertainty For a 95% confidence level (k = 2), the measurement expanded uncertainties for defined systems, in accordance with the recommendations of ISO 17025 as following: Test Item Extended Uncertainty Transmit Output Power Data Power [dBm] U = 0.42 dB Bandwidth Magnitude [%] U = 0.2% Band Edge Compliance Disturbance Power [dBm] U = 1.24 dB Spurious Emissions, Conducted Disturbance Power [dBm] U = 1.62 dB Field Strength of Spurious Radiation ERP [dBm] For 3 m Chamber: U = 4.9 dB (30 MHz to 26.5GHz) Frequency Stability Frequency Accuracy [ppm] U = 0.017 ppm 7 Appendixes Appendix No. Description SYBH(Z-RF)20180206036002-2001-A Appendix_for_GSM SYBH(Z-RF)20180206036002-2001-B Appendix_for_WCDMA SYBH(Z-RF)20180206036002-2001-D Appendix_for_LTE Band7 SYBH(Z-RF)20180206036002-2001-C Appendix_for_LTE Band5 SYBH(Z-RF)20180206036002-2001-E Appendix_for_LTE Band41 Appendix Description Appendix A Effective (Isotropic) Radiated Power Output Data Appendix B Peak-Average Ratio Appendix C Modulation Characteristics Appendix D Bandwidth Appendix E Band Edges Compliance Appendix F Spurious Emission at Antenna Terminals Appendix G Field Strength of Spurious Radiation Appendix H Frequency Stability Note: For the RSE data we tested ant1&ant2, the data presented is all the antenna mode; the other items we tested all antenna modes, but the data presented is the worst antenna mod END Report No.: Huawei Proprietary and Confidential Page 31 of 31 SYBH(Z-RF)20180206036002-2001 Copyright © Huawei Technologies Co., Ltd.


Document Created: 2018-05-02 10:50:06
Document Modified: 2018-05-02 10:50:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC