Test Report_NII

FCC ID: QIS801HW

Test Report

Download: PDF
FCCID_4101583

FCC RF Test Report Product Name: Mobile WiFi Model Number: 801HW Report No.: SYBH(Z-RF)20180926023001-2003 FCC ID：QIS801HW Reliability Laboratory of Huawei Technologies Co., Ltd. (Global Compliance and Testing Center of Huawei Technologies Co., Ltd) Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518

RF Test Report of 801HW Notice 1. The laboratory has passed the accreditation by China National Accreditation Service for Conformity Assessment (CNAS). The accreditation number is L0310. 2. The laboratory has passed the accreditation by The American Association for Laboratory Accreditation (A2LA). The accreditation number is 2174.01. 3. The laboratory has been recognized by the US Federal Communications Commission (FCC) to perform compliance testing subject to the Commission's Certification rules. The Designation Number is CN1173, and the Test Firm Registration Number is 294140. 4. The laboratory has been listed by Industry Canada to perform electromagnetic emission measurements. The recognition numbers of test site are 6369A-1. 5. The laboratory (Reliability Lab of Huawei Technologies Co., Ltd) is also named “Global Compliance and Testing Center of Huawei Technologies Co., Ltd”, the both names have coexisted since 2009. 6. The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. 7. The test report is invalid if there is any evidence of erasure and/or falsification. 8. The test report is only valid for the test samples. 9. Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without prior written approval from the laboratory. Report No.: Huawei Proprietary and Confidential Page 2 of 16 SYBH(Z-RF)20180926023001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of 801HW Applicant: Huawei Technologies Co., Ltd. Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Date of Receipt Sample: 2018-10-25 Start Date of Test: 2018-10-29 End Date of Test: 2018-11-20 Test Result: Pass Approved by Senior 2018-11-20 He Hao Engineer: Date Name Signature Prepared by: 2018-11-20 ZhouLingbo Date Name Signature Report No.: Huawei Proprietary and Confidential Page 3 of 16 SYBH(Z-RF)20180926023001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of 801HW CONTENT 1 General Information ................................................................................................................................................ 5 1.1 Applied Standard........................................................................................................................................ 5 1.2 Test Location ............................................................................................................................................. 5 1.3 Test Environment Condition ....................................................................................................................... 5 2 Test Summary ........................................................................................................................................................ 6 2.1 Measurement Technical Requirements ...................................................................................................... 6 3 Description of the Equipment under Test (EUT) ..................................................................................................... 8 3.1 General Description ................................................................................................................................... 8 3.2 EUT Identity ............................................................................................................................................... 8 3.3 Technical Description ................................................................................................................................. 9 4 General Test Conditions / Configurations ............................................................................................................. 10 4.1 Test Modes .............................................................................................................................................. 10 4.2 EUT Configurations .................................................................................................................................. 10 4.3 Test Environments ................................................................................................................................... 12 4.4 Test Setups .............................................................................................................................................. 13 4.5 Test Conditions ........................................................................................................................................ 14 5 Main Test Instruments .......................................................................................................................................... 15 6 Measurement Uncertainty..................................................................................................................................... 16 7 Appendixes ........................................................................................................................................................... 16 Report No.: Huawei Proprietary and Confidential Page 4 of 16 SYBH(Z-RF)20180926023001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of 801HW 1 General Information 1.1 Applied Standard Applied Rules: 47 CFR FCC Part 2, Subpart J 47 CFR FCC Part 15, Subpart C 47 CFR FCC Part 15, Subpart E Test Method: KDB 789033 D02 General UNII Test Procedures New Rules v02 FCC KDB 558074 D01 DTS Meas Guidance v04 ANSI C63.10-2013, American National Standard for Testing Unlicensed Wireless Devices 1.2 Test Location Test Location 1: Reliability Laboratory of Huawei Technologies Co., Ltd. Address1: No.2 New City Avenue Songshan Lake Sci. &Tech. Industry Park, Dongguan, Guangdong, P.R.C 1.3 Test Environment Condition Temperature: 15 to 30 °C (Ambient) Relative Humidity: 20 to 85 % (Ambient) Atmospheric Pressure: Not applicable Report No.: Huawei Proprietary and Confidential Page 5 of 16 SYBH(Z-RF)20180926023001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of 801HW 2 Test Summary 2.1 Measurement Technical Requirements 2.1.1 U-NII (5150-5250, 5250-5350, 5470-5725 MHz) Test Item Band FCC Rule No. Requirements Test Result Verdict 15.403(i) 5150-5250 15.407(a)(1) Emission 15.403(i) 5250-5350 No limit. Appendix A Pass Bandwidth 15.407(a)(2) 15.403(i) 5470-5725 15.407(a)(2) 5150-5250 KDB 789033 Occupied 5250-5350 D02 No limit. Appendix B Pass Bandwidth §B 5470-5725 Duty Cycle 5150-5725 -- No limit. Appendix C FCC: conducted 15.407(a)(1) 5150-5250 < 250mW 15.407(a)(4) (avg during transmission) Maximum FCC:conducted Output 15.407(a)(2) Appendix D 5250-5350 <MIN{250mW,11dBm+10*lg(EBW)} Power 15.407(a)(4) (avg during transmission) FCC: Pass 15.407(a)(2) conducted 5470-5725 15.407(a)(4) <MIN{250mW,11dBm+10*lg(EBW)} (avg during transmission) FCC 15.407(a)(1) conducted maximum 5150-5250 15.407(a)(4) <11dBm/MHz Power (avg during transmission) Appendix E Spectral conducted Density 15.407(a)(2) 5250-5350 <11dBm/MHz 15.407(a)(4) (avg during transmission) Report No.: Huawei Proprietary and Confidential Page 6 of 16 SYBH(Z-RF)20180926023001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of 801HW Test Item Band FCC Rule No. Requirements Test Result Verdict conducted 15.407(a)(2) 5470-5725 <11dBm/MHz 15.407(a)(4) (avg during transmission) 5150-5250 an emission is maintained within Frequency 5250-5350 15.407(g) the band of operation under all Appendix F Pass Stability 5470-5725 conditions Report No.: Huawei Proprietary and Confidential Page 7 of 16 SYBH(Z-RF)20180926023001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of 801HW 3 Description of the Equipment under Test (EUT) 3.1 General Description 801HW which supports LTE B2,B4,B12,B17,B25,B26,B41,And WCDMA HSDPA/HSUPA B2, B4, and CA. 801HW implement such functions as RF signal receiving/ transmitting, LTE/UMTS protocol processing, data service etc., and it can act as a Wi-Fi hotspot for user accessing to internet. Externally it provides USB interface (to connect to the notebook etc.), USIM card interface. 801HW has 6 internal antennas as default Wi-Fi, diversity, and main antenna. The Wi-Fi is 2X2 and the frequency are 2.4GHz and 5GHz. Note: Only 5G WIFI test data included in this report. 3.2 EUT Identity NOTE: Unless otherwise noted in the report, the functional boards installed in the units shall be selected from the below list, but not means all the functional boards listed below shall be installed in one unit. 3.2.1 Board Board Description Hardware Version Software Version Main Board CL1SB08M 8.0.1.31(H60SP9C643) 3.2.2 Sub-Assembly Sub-Assembly Sub-Assembly Name Model Manufacturer Description Huawei Technologies Rated capacity: 3000mAh Li-Polymer Battery HB494590EBC-B Co., Ltd. Nominal Voltage: +3.8V Report No.: Huawei Proprietary and Confidential Page 8 of 16 SYBH(Z-RF)20180926023001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of 801HW 3.3 Technical Description Characteristics Description IEEE 802.11 WLAN 802.11a (20 MHz channel bandwidth) , 802.11n (20 MHz channel bandwidth), Mode Supported 802.11n (40 MHz channel bandwidth), 802.11ac (20 MHz channel bandwidth), 802.11ac (40 MHz channel bandwidth), 802.11ac (80 MHz channel bandwidth), TX/RX Operating All fc = 5000 MHz + N * 5 MHz, where: Range - fc = “Operating Frequency” in MHz, - N = “Channel Number”. 5150-5250 MHz N = 36 to 48 with step of 4 for the 20 MHz channel bandwidth. (U-NII) N = 38 to 46 with step of 8 for the 40 MHz channel bandwidth. N = 42 for the 80 MHz channel bandwidth. 5250-5350 MHz N = 52 to 64 with step of 4 for the 20 MHz channel bandwidth. (U-NII) N = 54 to 62 with step of 8 for the 40 MHz channel bandwidth. N = 58 for the 80 MHz channel bandwidth. 5470-5725 MHz N = 100 to 140 with step of 4 for the 20 MHz channel bandwidth. (U-NII) N = 102 to 134 with step of 8 for the 40 MHz channel bandwidth. N = 106 to 122 with step of 16 for the 80 MHz channel bandwidth. Modulation Type BPSK/QPSK/16QAM/64QAM (OFDM). Emission Designator 20M8G7D (for 802.11a mod), U-NII(5150-5250 20M4G7D (for 802.11n 20 MHz mode), , 5250-5350, 39M8G7D (for 802.11n 40 MHz mode), 5470-5725,) 20M3G7D (for 802.11ac 20 MHz mode) 39M9G7D (for 802.11ac 40 MHz mode) 103MG7D (for 802.11ac 80 MHz mode) TPC Supported, Not Supported Antenna Description Isotropic Antenna Type External, Integrated Ports Ant 1, Ant 2, Ant 3, Ant 4 Smart System SISO (for 802.11a/n/ac), MIMO (for 802.11n/ac), Diversity (for 802.11a) : Tx & Rx Gain ANT1:4.3 dBi (per antenna port, max.) ANT2:4.8 dBi(per antenna port, max.) MIMO&CDD:3.2 dBi(per antenna port, max.) Remark When the EUT is put into service, the practical maximum antenna gain should NOT exceed the value as described above. Power Supply Type AC/DC Adapter PoE: Other: Report No.: Huawei Proprietary and Confidential Page 9 of 16 SYBH(Z-RF)20180926023001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of 801HW 4 General Test Conditions / Configurations 4.1 Test Modes NOTE: Worst cases for each IEEE 802.11 mode are selected to perform tests. Test Mode Test Modes Description 11A IEEE 802.11a with data rate of 6 Mbps using SISO mode. 11A-CDD IEEE 802.11a with data rate of 6 Mbps using CDD mode. 11N20 IEEE 802.11n with data date of MCS0 and bandwidth of 20 MHz using SISO mode. 11N20m IEEE 802.11n with data date of MCS8 and bandwidth of 20 MHz using MIMO mode. 11N40 IEEE 802.11n with data date of MCS0 and bandwidth of 40 MHz using SISO mode. 11N40m IEEE 802.11n with data date of MCS8 and bandwidth of 40 MHz using MIMO mode. 11AC20 IEEE 802.11ac with data date of MCS0 and bandwidth of 20 MHz using SISO mode. 11AC20m IEEE 802.11ac with data date of MCS8 and bandwidth of 20 MHz using SISO mode. 11AC40 IEEE 802.11ac with data date of MCS0 and bandwidth of 40 MHz using SISO mode. 11AC40m IEEE 802.11ac with data date of MCS8 and bandwidth of 40 MHz using MIMO mode. 11AC80 IEEE 802.11ac with data date of MCS0 and bandwidth of 80 MHz using SISO mode. 11AC80m IEEE 802.11ac with data date of MCS8 and bandwidth of 80 MHz using MIMO mode. 4.2 EUT Configurations 4.2.1 General Configurations Configuration Description Test Antenna Ports Until otherwise specified,  All TX tests are performed at all TX antenna ports of the EUT, and  All RX tests are performed at all RX antenna ports of the EUT. Multiple RF Sources Other than the tested RF source of the EUT, other RF source(s) are disabled or shutdown during measurements. 4.2.2 Customized Configurations 4.2.2.1 U-NII Duty cycle [%] Power Conf., per Port Test Mode ANT1 ANT2 ANT1 ANT2 11A CH36:13 CH36:13 98.94 98.94 CH100:11 CH100:11 CH140:12.5 CH140:12.5 Others:13.5 Others:13.5 11A _CDD CH36:15 98.94 98.94 Report No.: Huawei Proprietary and Confidential Page 10 of 16 SYBH(Z-RF)20180926023001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of 801HW Duty cycle [%] Test Mode Power Conf., per Port CH100:13 CH140:14.5 Others:15.5 11N_20M_SISO CH140:10 CH140:10 98.86 98.86 Others:11 Others:11 11N_40M_SISO CH38:10 CH38:10 96.64 96.64 CH62:8.5 CH62:8.5 CH102:8.5 CH102:8.5 Others:11 Others:11 11N_20M_MIMO CH140:12 98.07 98.07 Others:13 11N_40M_MIMO CH38:12 97.31 97.31 CH62:10.5 CH102:10.5 Others:13 11AC_20M_SISO CH140:10 CH140:10 98.87 98.87 Others:11 Others:11 11AC_20M_MIMO CH140:12 98.09 98.09 Others:13 11AC_40M_SISO CH38:10 CH38:10 96.66 96.64 CH62:8.5 CH62:8.5 CH102:8.5 CH102:8.5 Others:11 Others:11 11AC_40M_MIMO CH38:12 97.33 97.33 CH62:10.5 CH102:10.5 Others:13 11AC_80M_SISO CH42:8 CH42:8 96.91 97.12 CH58:6 CH58:6 CH106:4 CH106:4 CH122:11 CH122:11 11AC_80M_MIMO CH42:10 94.78 94.78 CH58:8 CH106:6 CH122:13 Report No.: Huawei Proprietary and Confidential Page 11 of 16 SYBH(Z-RF)20180926023001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of 801HW 4.3 Test Environments Environment Parameter Selected Values During Tests Relative Humidity Ambient Temperature TN Ambient VL 3.45V Voltage VN 3.8V VH 4.25V NOTE: VL= lower extreme test voltage VN= nominal voltage VH= upper extreme test voltage TN= normal temperature Report No.: Huawei Proprietary and Confidential Page 12 of 16 SYBH(Z-RF)20180926023001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of 801HW 4.4 Test Setups 4.4.1 Test Setup 1 The WLAN component’s antenna ports(s) of the EUT are connected to the measurement instrument per an appropriate attenuator. The EUT is controlled by PC/software to emit the specified signals for the purpose of measurements. Jumper Cable for connecting to RF Cables (If applicable) RF Cables EUT for testing WLAN Measurement Attenuator Component Instrument WLAN component's antenna port Power Control Grounding Supply PC (only for grounded device) Report No.: Huawei Proprietary and Confidential Page 13 of 16 SYBH(Z-RF)20180926023001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of 801HW 4.5 Test Conditions 4.5.1 U-NII Test Case Test Conditions Configuration Description Emission Meas. Method FCC KDB 789033 D02 §C). Bandwidth Test Env. NTNV (EBW) Test Setup Test Setup 1 EUT Conf. All EUT conf. with Tx modes. Occupied Meas. Method FCC KDB 789033 D02 §D). Bandwidth Test Env. NTNV (OBW) Test Setup Test Setup 1 EUT Conf. All EUT conf. with Tx modes. Maximum Meas. Method FCC KDB 789033 D02 §E)3) b) Conducted Test Env. NTNV Output Power Test Setup Test Setup 1 EUT Conf. All EUT conf. with Tx modes. Maximum Meas. Method FCC KDB 789033 D02 §F). Power Spectral Test Env. NTNV Density Test Setup Test Setup 1 EUT Conf. All EUT conf. with Tx modes. 15.407(g) Meas. Method Frequence Stability Frequency (1) -30 °C to +50 °C with step 10 °C at Rated Voltage; Test Env. Stability (2) VL, VN and VH of Rated Voltage at Ambient Climate. Test Setup Test Setup 1 EUT Conf. Ch.36,Ch.140 Report No.: Huawei Proprietary and Confidential Page 14 of 16 SYBH(Z-RF)20180926023001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of 801HW 5 Main Test Instruments NOTE: Unless otherwise specified, the calibration intervals for test instruments were Annual (per year). The other intervals, if applicable, are marked with (##y), which denotes ## years calibration interval. Test Address 1: Main Test Equipments Equipment Name Manufacturer Model Serial Number Cal Date Cal- Due Power supply KEITHLEY 2303 1342889 2018/10/23 2019/10/22 Spectrum Analyzer Agilent N9030A MY49431698 2018/7/23 2019/7/23 Signal generator Agilent E8257D MY49281095 2018/7/23 2019/7/22 BT/WIFI test system Tonscend JS0806-2 188060102 2018/05/30 2019/05/29 Temperature Chamber WEISS WKL64 56246002940010 2017/12/13 2018/12/12 Report No.: Huawei Proprietary and Confidential Page 15 of 16 SYBH(Z-RF)20180926023001-2003 Copyright © Huawei Technologies Co., Ltd.

RF Test Report of 801HW 6 Measurement Uncertainty For a 95% confidence level (k = 2), the measurement expanded uncertainties for defined systems, in accordance with the recommendations of ISO 17025 as following: Test Item Extended Uncertainty Transmit Output Power Data Power [dBm] U = 0.58 dB RF Power Density, Conducted Power [dBm] U = 0.64 dB Bandwidth Magnitude [kHz] 20MHz: U=41.78kHz 40MHz: U=82.12kHz 80MHz: U=163.5kHz Frequency Stability Frequency Accuracy [Hz] U=82.24Hz Duty Cycle Duty Cycle [%] U=±2.06 % 7 Appendixes Appendix No. Description SYBH(Z-RF)20180926023001-2003-A Appendix for 5 WLAN END Report No.: Huawei Proprietary and Confidential Page 16 of 16 SYBH(Z-RF)20180926023001-2003 Copyright © Huawei Technologies Co., Ltd.


Document Created: 2018-11-29 16:33:56
Document Modified: 2018-11-29 16:33:56
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC