Equipment: GSM/GPRS Wireless Module

Gemalto M2M GmbH BGS12

Siemensdamm 50, Berlin, N/A 13629 Germany

Frequency Range
Final Action Date
File NameDocument TypeDateDirect
ID Label/Location InfoID Label/Location Info 2019-04-26 00:00:00 pdf
Users ManualUsers Manual 2019-07-30 00:00:00 pdf
Test Setup PhotosTest Setup Photos 2019-07-30 00:00:00 pdf
External photoExternal Photos 2019-07-30 00:00:00 pdf
Internal PhotosInternal Photos 2019-07-30 00:00:00 pdf
RF exposure reportRF Exposure Info 2019-04-26 00:00:00 pdf
Test Report_Part 24Test Report 2019-04-26 00:00:00 pdf
Test Report_Part 22Test Report 2019-04-26 00:00:00 pdf
modular_approval_statementCover Letter(s) 2019-04-26 00:00:00 pdf
FCC DOCCover Letter(s) 2019-04-26 00:00:00 pdf
Request for non-disclosure-short_termCover Letter(s) 2019-04-26 00:00:00 pdf
Request for non-disclosure-long_termCover Letter(s) 2019-04-26 00:00:00 pdf
Declaration of authorizationCover Letter(s) 2019-04-26 00:00:00 pdf
Block DiagramBlock Diagram N/A
Operational DescriptionOperational Description N/A
Parts_ListParts List/Tune Up Info N/A
SchematicsSchematics N/A
Tune Up procedureParts List/Tune Up Info N/A

Application Details:

EquipmentGSM/GPRS Wireless Module
Grantee CodeQIP
Product CodeBGS12
Applicant BusinessGemalto M2M GmbH
Business AddressSiemensdamm 50 , Berlin,N/A Germany 13629
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
TCB Email[email protected]
ApplicantAxel Heike – Manager Approval
Applicant Phone
Applicant Fax004930311028305
Applicant Email[email protected]
Applicant MailStop
Test FirmBTL INC.
Test Firm ContactSophia Huang
Test Firm Phone 526
Test Firm Fax
Test Firm Email[email protected]
Certified ByAbby Lu – Senior Specialist
Comment [QORLwJsln02zpfLX3vc/AA==]: Modular approval. Output power is ERP for Part 22 and EIRP for Part 24 . This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC