report

FCC ID: QH9R122802

Test Report

Download: PDF

FCCID_262694

FCC ID: QH9R122802

PRODUCT SERVICE

TEST RESULT SUMMARY
FCC PART 15 SUBPART B
Class B Limit

MANUFACTURER'S NAME Kondo Kagaku Company LTD

NAME OF EQUIPMENT FM Receiver

MODEL NUMBER KR-301F

MANUFACTURER'S ADDRESS 17-7 Higashi-Nippon 4 chome
Arakawa-ku Tokyo Japan

TEST REPORT NUMBER NC203630

TEST DATE 24 July 2002

According to testing performed at TÜV Product Service Inc, the above-mentioned unit is in compliance with the
electromagnetic compatibility requirements defined in FCC Part 15.

It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with
identical electrical and mechanical characteristics. Any modifications necessary for compliance made during
testing on the above mentioned date(s) must be implemented in all production units for compliance to be
maintained.

TÜV Product Service Inc, as an independent testing laboratory, declares that the equipment tested as specified
above conforms to the requirements of FCC Part 15.

Date: 29 July 2002

Location: Taylors Falls MN R. M. Johnson T. K. Swanson
USA Test Technician Test Technician

Not Transferable

PRODUCT SERVICE

EMC EMISSION - T E S T R E P O R T

Test Report File No. : NC203630 Date of issue: 29 July 2002

Model / Serial No. : KR-301F /

Product Type : FM Receiver

Applicant : Kondo Kagaku Company LTD

Manufacturer : Kondo Kagaku Company LTD

License holder : Kondo Kagaku Company LTD

Address : 17-7 Higashi-Nippon 4 chome
: Arakawa-ku Tokyo Japan

Test Result : n Positive o Negative

Test Project Number :
Reference(s) NC203630

Total pages including
Appendices 20

TÜV Product Service Inc is a subcontractor to TÜV Product Service, GmbH according to the principles outlined in ISO/IEC Guide 25 and EN
45001.

TÜV Product Service Inc reports apply only to the specific samples tested under stated test conditions. It is the manufacturer's responsibility
to assure that additional production units of this model are manufactured with identical electrical and mechanical components. TÜV Product
Service Inc shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV Product Service Inc
issued reports.

This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test
report shall not be reproduced except in full without our written approval. This report shall not be used by the client to claim product
endorsement by NVLAP or any agency of the US government.

TÜV Product Service Inc and its professional staff hold government
and professional organization certifications and are members of
AAMI, ACIL, AEA, ANSI, IEEE, NVLAP, and VCCI

File No. NC203630, Page 1 of 12
TÜV PRODUCT SERVICE INC 19333 Wild Mountain Road Taylors Falls MN 55084-1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

PRODUCT SERVICE

D I R E C T O R Y - EMISSIONS
Page(s)
A) Documentation

Test report 1 - 10

Directory 2

Test Regulations 3

Deviations from standard / Summary 10

Test-setups (Photos) 11 - 12

Test-setup (drawing) Appendix A

B) Test data

Conducted emissions 10/150 kHz - 30 MHz 5, 9

Radiated emissions 10 kHz - 30 MHz 5, 9

Radiated emissions 30 MHz - 1000 MHz 6, 9

Interference power 30 MHz - 300 MHz 6, 9

Equivalent Radiated emissions 1 GHz - 18 GHz 7, 9

C) Appendix A

Test Data Sheets and Test Setup Drawing(s) A2 – A5

D) Appendix B

Constructional Data Form B2

Product Information Form(s) N/A

E) Appendix C

Measurement Protocol C1 - C2

File No. NC203630, Page 2 of 12
TÜV PRODUCT SERVICE INC 19333 Wild Mountain Road Taylors Falls MN 55084-1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

PRODUCT SERVICE

EMISSIONS TEST REGULATIONS :
The emissions tests were performed according to following regulations:
--------------------------------------------------------------------------------
o - EN 50081-1 / 1991
o - EN 55011 / 1991 o - Group 1 o - Group 2
o - Class A o - Class B
o - EN 55013 / 1990
o - EN 55014 / 1987 o - Household appliances and similar
o - Portable tools
o - Semiconductor devices
o - EN 55014 / A2:1990
o - EN 55014 / 1993 o - Household appliances and similar
o - Portable tools
o - Semiconductor devices
o - EN 55015 / 1987
o - EN 55015 / A1:1990
o - EN 55015 / 1993
o - EN 55022 / 1987 o - Class A o - Class B
o - EN 55022 / 1994 o - Class A o - Class B
o - BS
o - VCCI o - Class A o - Class B
n - FCC o - Class A n - Class B
o - AS 3548 (1992) o - Class A o - Class B
o - CISPR 11 (1990) o - Group 1 o - Group 2
o - Class A o - Class B
o - CISPR 22 (1993) o - Class A o - Class B

File No. NC203630, Page 3 of 12
TÜV PRODUCT SERVICE INC 19333 Wild Mountain Road Taylors Falls MN 55084-1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

PRODUCT SERVICE

Environmental conditions in the lab:
Actual
Temperature: : 20 °C
Relative Humidity : 68 %
Atmospheric pressure : 98.0 kPa
Power supply system : 6 VDC

Sign Explanations:
o - not applicable
n - applicable

File No. NC203630, Page 4 of 12
TÜV PRODUCT SERVICE INC 19333 Wild Mountain Road Taylors Falls MN 55084-1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

PRODUCT SERVICE

Emissions Test Conditions: CONDUCTED EMISSIONS (Interference Voltage)

The CONDUCTED EMISSIONS (INTERFERENCE VOLTAGE) measurements were performed at the following test location:

n - Test not applicable

o - Wild River Lab Large Test Site (Open Area Test Site)
o - Wild River Lab Small Test Site (Open Area Test Site)
o - Oakwood Lab (Open Area Test Site)
o - Wild River Lab Screen Room
o - New Brighton Lab Shielded Room

Emissions Test Conditions: RADIATED EMISSIONS (Magnetic Field)

The RADIATED EMISSIONS (MAGNETIC FIELD) measurements were performed at the following test location:

n - Test not applicable

o - Wild River Lab Large Test Site (Open Area Test Site)
o - Wild River Lab Small Test Site (Open Area Test Site)
o - Oakwood Lab (Open Area Test Site)

at a test distance of :

o - 3 meters
o - 30 meters

File No. NC203630, Page 5 of 12
TÜV PRODUCT SERVICE INC 19333 Wild Mountain Road Taylors Falls MN 55084-1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

PRODUCT SERVICE

Emissions Test Conditions: RADIATED EMISSIONS (Electric Field)

The EQUIVALENT RADIATED EMISSIONS measurements in the frequency range 1 GHz - 18 GHz were performed in a
horizontal and vertical polarization at the following test location:

n - Test not applicable

o - Wild River Lab Large Test Site (Open Area Test Site)
o - Wild River Lab Small Test Site (Open Area Test Site)
o - Oakwood Lab (Open Area Test Site)
o - Wild River Lab Screen Room

at a test distance of:

o - 1 meters
o - 3 meters
o - 10 meters

File No. NC203630, Page 7 of 12
TÜV PRODUCT SERVICE INC 19333 Wild Mountain Road Taylors Falls MN 55084-1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

PRODUCT SERVICE

Equipment Under Test (EUT) Test Operation Mode - Emission tests :
The device under test was operated under the following conditions during emissions testing:

o - Standby

o - Test program (H - Pattern)

o - Test program (color bar)

o - Test program (customer specific)

o - Practice operation

n - Normal Operating Mode

o-

Configuration of the device under test:

n - See Constructional Data Form in Appendix B - Pages B2

o - See Product Information Form in Appendix B - beginning on Page B3

The following peripheral devices and interface cables were connected during the measurement:

o- Type :
o- Type :
o- Type :
o- Type :
o- Type :
o- Type :
o- Type :
o- Type :
o - unshielded power cable
o - unshielded cables
o - shielded cables MPS.No.:
o - customer specific cables
o-
o-

File No. NC203630, Page 8 of 12
TÜV PRODUCT SERVICE INC 19333 Wild Mountain Road Taylors Falls MN 55084-1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

PRODUCT SERVICE

Emission Test Results:

Conducted emissions 10/150 kHz - 30 MHz
The requirements are o - MET o - NOT MET
Minimum margin of compliance dB at kHz
Maximum margin of non-compliance dB at MHz
Remarks:

Radiated emissions (magnetic field) 10 kHz - 30 MHz
The requirements are o - MET o - NOT MET
Minimum margin of compliance dB at MHz
Maximum margin of non-compliance dB at MHz
Remarks:

Radiated emissions (electric field) 30 MHz - 1000 MHz
The requirements are n - MET o - NOT MET
Minimum margin of compliance 7 dB at 37.61 MHz
Maximum margin of non-compliance dB at MHz
Remarks:

Interference Power at the mains and interface cables 30 MHz - 300 MHz
The requirements are o - MET o - NOT MET
Minimum margin of compliance dB at MHz
Maximum margin of non-compliance dB at MHz
Remarks:

Equivalent Radiated emissions 1 GHz - 18 GHz
The requirements are o - MET o - NOT MET
Minimum margin of compliance dB at MHz
Maximum margin of non-compliance dB at MHz
Remarks:

File No. NC203630, Page 9 of 12
TÜV PRODUCT SERVICE INC 19333 Wild Mountain Road Taylors Falls MN 55084-1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

PRODUCT SERVICE

DEVIATIONS FROM STANDARD:

None

GENERAL REMARKS:

SUMMARY:

The requirements according to the technical regulations are

n - met

o - not met.

The device under test does

n - fulfill the general approval requirements mentioned on page 3.

o - not fulfill the general approval requirements mentioned on page 3.

Testing Start Date: 24 July 2002
_______________________

Testing End Date: 24 July 2002
_______________________

- TÜV PRODUCT SERVICE INC -

Tested By: T. K. Swanson
R. M. Johnson Test Technician

File No. NC203630, Page 10 of 12
TÜV PRODUCT SERVICE INC 19333 Wild Mountain Road Taylors Falls MN 55084-1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

PRODUCT SERVICE

Test-setup photo(s):
Conducted emission 10/150 kHz - 30 MHz

Not Applicable

File No. NC203630, Page 11 of 12
TÜV PRODUCT SERVICE INC 19333 Wild Mountain Road Taylors Falls MN 55084-1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

PRODUCT SERVICE

Test-setup photo(s):
Radiated emission 30 MHz - 1000 MHz

See the Test Setup Exhibit included in the submittal package

File No. NC203630, Page 12 of 12
TÜV PRODUCT SERVICE INC 19333 Wild Mountain Road Taylors Falls MN 55084-1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

PRODUCT SERVICE

Appendix A

Test Data Sheets

and

Test Setup Drawing(s)

File No. NC203630, Page A1 of A5
TÜV PRODUCT SERVICE INC 19333 Wild Mountain Road Taylors Falls MN 55084-1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

PRODUCT SERVICE

TEST SETUP FOR EMISSIONS TESTING

WILD RIVER LAB
Small Test Site (STS)

See the Test Setup Exhibit included in the submittal package

File No. NC203630, Page A2 of A5
TÜV PRODUCT SERVICE INC 19333 Wild Mountain Road Taylors Falls MN 55084-1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

Radiated Electromagnetic Emissions
Test Report #: 3630 Run 02 Test Area: STS 3M

Test Method: FCC Part 15 Test Date: 24-Jul-2002

EUT Model #: mn:R-122802 pn:KR- EUT Power: 6 VDC
301F 75MHz
EUT Serial #: Temperature: 20 °C

Manufacturer: Kondo Kagaku Co., LTD. Relative Humidity: 68 %

EUT Description: Receiver Air Pressure: 98 kPa

Notes: Page: 1 of 3

FREQ LEVEL CABLE / ANT / PREAMP FINAL POL / HGT / AZ DELTA1 DELTA2
(MHz) (dBuV) (dB) (dB/m) (dB) (dBuV/m) (m) (DEG) FCC B (< 1GHz) N/A

37.61 40.9 Qp 1.2 / 17.8 / 27.9 32.0 V / 1.0 / 0.0 -8.0 N/A
75.22 35.5 Qp 1.6 / 8.1 / 27.7 17.4 V / 1.0 / 0.0 -22.6 N/A
112.84 30.9 Qp 2.0 / 9.5 / 27.8 14.5 V / 1.0 / 0.0 -29.0 N/A
150.46 28.1 Qp 2.3 / 9.7 / 27.7 12.3 V / 1.0 / 0.0 -31.2 N/A
188.08 27.3 Qp 2.6 / 10.0 / 27.8 12.1 V / 1.0 / 0.0 -31.4 N/A
225.70 26.0 Qp 2.9 / 10.8 / 27.9 11.8 V / 1.0 / 0.0 -34.2 N/A
263.31 25.9 Qp 3.1 / 12.6 / 27.9 13.8 V / 1.0 / 0.0 -32.2 N/A
300.93 26.2 Qp 3.3 / 13.4 / 28.1 14.8 V / 1.0 / 0.0 -31.2 N/A
338.55 26.3 Qp 3.6 / 14.4 / 28.0 16.3 V / 1.0 / 0.0 -29.7 N/A
376.17 25.9 Qp 3.8 / 15.3 / 28.0 17.0 V / 1.0 / 0.0 -29.0 N/A
413.79 25.7 Qp 4.0 / 15.8 / 28.0 17.4 V / 1.0 / 0.0 -28.6 N/A
451.41 26.2 Qp 4.2 / 16.4 / 28.0 18.7 V / 1.0 / 0.0 -27.3 N/A

75.22 36.6 Qp 1.6 / 8.1 / 27.7 18.6 V / 1.0 / 180.0 -21.4 N/A

MAXIMIZED.
37.61 41.5 Qp 1.2 / 17.8 / 27.9 32.6 V / 1.2 / 270.0 -7.4 N/A

MAXED ANTENNA AND ROTATED EUT 360 DEGREES.

NO NEW OR HIGHER EMISSIONS FOUND WITH HORIZONTAL POLARIZATION AT ALL AZIMUTHS.

END OF SCAN 30 - 1000MHZ.

Tested by: RMJ

Printed Signature

Reviewed by: TKS

Printed Signature
File No. NC203630, Page A3 of A5

Radiated Electromagnetic Emissions
Test Report #: 3630 Run 02 Test Area: STS 3M

Test Method: FCC Part 15 Test Date: 24-Jul-2002

EUT Model #: mn:R-122802 pn:KR- EUT Power: 6 VDC
301F 75MHz
EUT Serial #: Temperature: 20 °C

Manufacturer: Kondo Kagaku Co., LTD. Relative Humidity: 68 %

EUT Description: Receiver Air Pressure: 98 kPa

Notes: Page: 2 of 3

FREQ LEVEL CABLE / ANT / PREAMP FINAL POL / HGT / AZ DELTA1 DELTA2
(MHz) (dBuV) (dB) (dB/m) (dB) (dBuV/m) (m) (DEG) FCC B (< 1GHz) N/A

********** MEASUREMENT SUMMARY **********
37.61 41.5 Qp 1.2 / 17.8 / 27.9 32.6 V / 1.2 / 270.0 -7.4 N/A
75.22 36.6 Qp 1.6 / 8.1 / 27.7 18.6 V / 1.0 / 180.0 -21.4 N/A
451.41 26.2 Qp 4.2 / 16.4 / 28.0 18.7 V / 1.0 / 0.0 -27.3 N/A
413.79 25.7 Qp 4.0 / 15.8 / 28.0 17.4 V / 1.0 / 0.0 -28.6 N/A
112.84 30.9 Qp 2.0 / 9.5 / 27.8 14.5 V / 1.0 / 0.0 -29.0 N/A
376.17 25.9 Qp 3.8 / 15.3 / 28.0 17.0 V / 1.0 / 0.0 -29.0 N/A
338.55 26.3 Qp 3.6 / 14.4 / 28.0 16.3 V / 1.0 / 0.0 -29.7 N/A
150.46 28.1 Qp 2.3 / 9.7 / 27.7 12.3 V / 1.0 / 0.0 -31.2 N/A
300.93 26.2 Qp 3.3 / 13.4 / 28.1 14.8 V / 1.0 / 0.0 -31.2 N/A
188.08 27.3 Qp 2.6 / 10.0 / 27.8 12.1 V / 1.0 / 0.0 -31.4 N/A
263.31 25.9 Qp 3.1 / 12.6 / 27.9 13.8 V / 1.0 / 0.0 -32.2 N/A
225.70 26.0 Qp 2.9 / 10.8 / 27.9 11.8 V / 1.0 / 0.0 -34.2 N/A

Tested by: RMJ

Printed Signature

Reviewed by: TKS

Printed Signature
File No. NC203630, Page A4 of A5

PRODUCT SERVICE

Appendix B

Constructional Data Form

And/or

Product Information Form

Not Provided

File No. NC203630, Page B1 of B1
TÜV PRODUCT SERVICE INC 19333 Wild Mountain Road Taylors Falls MN 55084-1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

PRODUCT SERVICE

Appendix C

MEASUREMENT PROTOCOL FOR FCC
GENERAL INFORMATION

In compliance with FCC Docket 92-152, "Harmonization of Rules for Digital Devices Incorporate International Standards",
testing for FCC compliance may be done following the ANSI C63.4-1992 procedures and using the CISPR 22 Limits.

Measurement Uncertainty
The test system for conducted emissions is defined as the LISN, tuned receiver or spectrum analyzer, and coaxial cable.
The test system for radiated emissions is defined as the antenna, the pre-amplifier, the spectrum analyzer and the coaxial
cable. These test systems have a measurement uncertainty of ±4.5 dB. The equipment comprising the test systems are
calibrated on an annual basis.

Justification
The Equipment Under Test (EUT) is configured in a typical user arrangement in accordance with the manufacturer's
instructions. A cable is connected to each available port and either terminated with a peripheral into it’s characteristic
impedance or left unterminated. When appropriate, the cables are manually manipulated with respect to each other to
obtain maximum emissions from the unit.

CONDUCTED EMISSIONS
The final level, expressed in dBµV, is arrived at by taking the reading directly from the EMI receiver. This level is
compared directly to the CISPR limit. Conducted and radiated emission testing is performed according to the procedures
in ANSI C.63.4-1992.

To convert between dBµV and µV, the following conversions apply:
dBµV = 20(log µV)
µV = Inverse log(dBµV/20)

RADIATED EMISSIONS
The final level, expressed in dBµV/m, is arrived at by taking the reading from the spectrum analyzer (Level dBµV), adding
the antenna correction factor and cable loss factor (Factor dB) to it, then subtracting the preamp gain. This result then has
the CISPR limit subtracted from it to provide the Delta which gives the tabular data as shown in the data sheets in
Attachment A.

Example:
FREQ LEVEL CABLE/ANT/PREAMP FINAL POL/HGT/AZ DELTA1
(MHz) (dBuV) (dB) (dB/m) (dB) (dBuV/m) (m) (deg) FCC

60.80 42.5Qp + 1.2 + 10.9 - 25.5 = 29.1 V 1.0 0.0 -10.9

File No. NC203630, Page C1 of C2
TÜV PRODUCT SERVICE INC 19333 Wild Mountain Road Taylors Falls MN 55084-1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

PRODUCT SERVICE

DETAILS OF TEST PROCEDURES

General Standard Information
The test methods used comply with ANSI C63.4-1992 - "Methods of Measurement of Radio-Noise Emissions from Low-
Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz."

Conducted Emissions
Conducted emissions on the 60 Hz power interface of the EUT are measured in the frequency range of 150 kHz to
30 MHz. The measurements are performed using a receiver, which has CISPR characteristic bandwidth and quasi-peak
detection, and a Line Impedance Stabilization Network (LISN), with 50 Ω/50 µH (CISPR 16) characteristics. Table top
equipment is placed on a non-conducting table 80 centimeters above the floor and is positioned 40 centimeters from the
vertical ground plane (wall) of the screen room. In some cases, a pre-scan using a spectrum analyzer is initially
performed on the units comprising the system under test to locate the highest emissions. If the minimum passing margin
appears to be less than 20 dB with a peak mode measurement, the emissions are re-measured using a tuned receiver or
spectrum analyzer with quasi-peak and average detection and recorded on the data sheets.

Radiated Emissions
Radiated emissions from the EUT are measured in the frequency range of 30 to 1000 MHz using a spectrum analyzer and
appropriate broadband linearly polarized antennas. Measurements between 30 MHz and 1000 MHz are made with
120 kHz/6 dB bandwidth and quasi-peak detection and measurements above 1000 MHz are made with a 1 MHz/6 dB
bandwidth and peak detection. Table top equipment is placed on a 1.0 X 1.5 meter non-conducting table 80 centimeters
above the ground plane. Floor standing equipment is placed directly on the turntable/ground plane. Interface cables that
are closer than 40 centimeters to the ground plane are bundled in the center in a serpentine fashion so they are at least
40 centimeters from the ground plane. Cables to simulators/testers (if used in this test) are routed through the center of
the table and to a screen room located outside the test area. The antenna is positioned 10 meters horizontally from the
EUT. To locate maximum emissions from the test sample the antenna is varied in height from 1 to 4 meters,
measurement scans are made with both horizontal and vertical antenna polarizations and the EUT are rotated
360 degrees.

File No. NC203630, Page C2 of C2
TÜV PRODUCT SERVICE INC 19333 Wild Mountain Road Taylors Falls MN 55084-1758 Tel: 651 638 0297 Fax: 651 638 0298 Rev.No 1.0

Document Created: 2002-07-30 16:19:43
Document Modified: 2002-07-30 16:19:43

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC