R12902541-E2 v3 FCC IC MPE REPORT

FCC ID: QFS001-10037200L

RF Exposure Info

Download: PDF
FCCID_4420993

FCC Part 1 Subpart I FCC Part 2 Subpart J RSS 102 ISSUE 5 RF EXPOSURE REPORT FOR GROUND RADAR MODEL NUMBER: GA1360-L FCC ID: QFS001-10037200L REPORT NUMBER: R12902541-E2 ISSUE DATE: 2019-08-29 Prepared for DYNETICS 1002 EXPLORER BOULEVARD HUNTSVILLE, AL 35806 USA Prepared by UL LLC 12 LABORATORY DR. RESEARCH TRIANGLE PARK, NC 27709 USA TEL: (919) 549-1400 NVLAP LAB CODE 200246-0

REPORT NO: R12902541-E2 DATE: 2019-08-29 FCC ID: QFS001-10037200L Revision History Issue Ver. Date Revisions Revised By 1 2019-08-22 Initial Issue Richard Jankovics Revised max output power and operating 2 2019-08-27 Richard Jankovics frequency Revised operating frequency and separation 3 2019-08-29 Richard Jankovics distance Page 2 of 9 UL LLC FORM NO: 03-EM-F00858 12 Laboratory Dr., RTP, NC 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC.

REPORT NO: R12902541-E2 DATE: 2019-08-29 FCC ID: QFS001-10037200L TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 5 3. REFERENCES ................................................................................................................... 5 4. FACILITIES AND ACCREDITATION ................................................................................. 5 5. DEVICE UNDER TEST ....................................................................................................... 5 6. MAXIMUM PERMISSIBLE EXPOSURE (LIMITS AND EQUATIONS) ............................... 6 6.1. FCC RULES ................................................................................................................ 6 6.2. ISED RULES ............................................................................................................... 7 6.3. EQUATIONS................................................................................................................ 8 7. RF EXPOSURE RESULTS ................................................................................................. 9 Page 3 of 9 UL LLC FORM NO: 03-EM-F00858 12 Laboratory Dr., RTP, NC 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC.

REPORT NO: R12902541-E2 DATE: 2019-08-29 FCC ID: QFS001-10037200L 1. ATTESTATION OF TEST RESULTS COMPANY NAME: Dynetics 1002 Explorer Boulevard Huntsville, AL 35806-2806 EUT DESCRIPTION: Ground Radar MODEL: GA1360-L APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 1 SUBPART I & PART 2 SUBPART J Complies RSS 102 ISSUE 5 Complies UL LLC. tested the above equipment in accordance with the requirements set forth in the above standards. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. All samples tested were in good operating condition throughout the entire test program. Measurement Uncertainties are published for informational purposes only and were not taken into account unless noted otherwise. This document may not be altered or revised in any way unless done so by UL LLC. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL LLC. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of the U.S. government. Approved & Released For UL LLC. By: Prepared By: Jeff Moser Richard Jankovics Operations Leader Operations Leader CONSUMER TECHNOLOGY DIVISION CONSUMER TECHNOLOGY DIVISION UL LLC. UL LLC. Page 4 of 9 UL LLC FORM NO: 03-EM-F00858 12 Laboratory Dr., RTP, NC 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC.

REPORT NO: R12902541-E2 DATE: 2019-08-29 FCC ID: QFS001-10037200L 2. TEST METHODOLOGY All calculations were made in accordance with FCC Parts 1.1310, 2.1091, KDB 447498 D01 v06, IEEE Std C95.1-2005, IEEE Std C95.3-2002, IC Safety Code 6 and RSS 102 Issue 5. 3. REFERENCES All measurements were made as documented in test report UL LLC R12902541-E1 for operation in the 3 GHz band. Output power, Duty cycle and Antenna gain data is excerpted from the applicable test reports and product documentation provided by the applicant. 4. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 12 Laboratory Dr., Research Triangle Park, NC 27709, USA and 2800 Perimeter Park Dr., Suite B, Morrisville, NC 27560, USA. UL LLC (RTP) is accredited by NVLAP, Laboratory Code 200246-0. 5. DEVICE UNDER TEST The EUT is a wide-band ground radar used to monitor a specific area. Other details regarding the EUT are documented in the applicable test reports and product documentation. Page 5 of 9 UL LLC FORM NO: 03-EM-F00858 12 Laboratory Dr., RTP, NC 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC.

REPORT NO: R12902541-E2 DATE: 2019-08-29 FCC ID: QFS001-10037200L 6. MAXIMUM PERMISSIBLE EXPOSURE (LIMITS AND EQUATIONS) 6.1. FCC RULES §1.1310 The criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in §1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of §2.1093 of this chapter. TABLE 1—LIMITS FOR M AXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency range Electric field strength Magnetic field strength Power density Averaging time (MHz) (V/m) (A/m) (mW/cm2) (minutes) (A) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *100 6 3.0-30 1842/f 4.89/f *900/f2 6 30-300 61.4 0.163 1.0 6 300-1,500 f/300 6 1,500-100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *100 30 1.34-30 824/f 2.19/f *180/f2 30 30-300 27.5 0.073 0.2 30 300-1,500 f/1500 30 1,500-100,000 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density Notes: (1) Occupational/controlled exposure limits apply in situations in which persons are exposed as a consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. Limits for occupational/controlled exposure also apply in situations when a person is transient through a location where occupational/controlled limits apply provided he or she is made aware of the potential for exposure. (2) General population/uncontrolled exposure limits apply in situations in which the general public may be exposed, or in which persons who are exposed as a consequence of their employment may not be fully aware of the potential for exposure or cannot exercise control over their exposure Page 6 of 9 UL LLC FORM NO: 03-EM-F00858 12 Laboratory Dr., RTP, NC 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC.

REPORT NO: R12902541-E2 DATE: 2019-08-29 FCC ID: QFS001-10037200L 6.2. ISED RULES For the purpose of this standard, Innovation, Science and Economic Development (ISED) has adopted the SAR and RF field strength limits established in Health Canada’s RF exposure guideline, Safety Code 6. Page 7 of 9 UL LLC FORM NO: 03-EM-F00858 12 Laboratory Dr., RTP, NC 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC.

REPORT NO: R12902541-E2 DATE: 2019-08-29 FCC ID: QFS001-10037200L 6.3. EQUATIONS POWER DENSITY Power density is given by: S = EIRP / (4 * Pi * D^2) Where S = Power density in mW/cm^2 EIRP = Equivalent Isotropic Radiated Power in mW D = Separation distance in cm Power density in units of mW/cm^2 is converted to units of W/m^2 by multiplying by 10. DISTANCE Distance is given by: D = SQRT (EIRP / (4 * Pi * S)) Where D = Separation distance in cm EIRP = Equivalent Isotropic Radiated Power in mW S = Power density in mW/cm^2 SOURCE-BASED DUTY CYCLE Where applicable (for example, multi-slot cell phone applications) a duty cycle factor may be applied. Source-based time-averaged EIRP = (DC / 100) * EIRP Where DC = Duty Cycle in %, as applicable EIRP = Equivalent Isotropic Radiated Power in mW Page 8 of 9 UL LLC FORM NO: 03-EM-F00858 12 Laboratory Dr., RTP, NC 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC.

REPORT NO: R12902541-E2 DATE: 2019-08-29 FCC ID: QFS001-10037200L 7. RF EXPOSURE RESULTS In the table below, Power and Gain are entered in units of dBm and dBi respectively and conversions to linear forms are used for the calculations. Single Chain and non-colocated transmitters Band Mode Separ. Output Ant. Duty EIRP FCC PD ISED PD FCC ISED Distance AVG Gain Cycle PD Limit PD Limit Power (cm) (dBm) (dBi) (%) (mW) (mW/cm^2) (W/m^2) (mW/cm^2) (W/m^2) 3 GHz 1,2,3 100 29.00 3.00 100.0 1584.89 0.01 0.13 1.00 6.26 Notes: 1) For MPE the new KDB 447498 requires the calculations to use the maximum rated power; that power should be declared by the manufacturer and should not be lower than the measured power. 2) The manufacturer configures output power so that the maximum power, after accounting for manufacturing tolerances, will never exceed the maximum power level measured. 3) Using the lowest operating frequency (3023.4375 MHz) in equations, as this would represent the lowest limit. Duty cycle assumed to be 100% as worst case. 4) The antenna gain in the tables above is the maximum antenna gain. Conclusion: The computed power density values are less than the corresponding limits at a worse case separation distance of 100 cm per the product manual; therefore, the device is compliant with the RF exposure limits. END OF TEST REPORT Page 9 of 9 UL LLC FORM NO: 03-EM-F00858 12 Laboratory Dr., RTP, NC 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC.


Document Created: 2019-08-29 09:41:45
Document Modified: 2019-08-29 09:41:45
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC