test report 1

FCC ID: QEATX27

Test Report

Download: PDF
FCCID_250642

TEST REPORT Report No. : AC006108 Date : 2002 June 08 Client : Kid Galaxy Inc. One Sundial Ave, Suite 310 Manchester, NH 03103, U.S.A. Sample Description : Sample stated to be : Item Name Item No. My First RC – Airplane 5500 My Firs RC – Racing Car 5501 My First RC – Dump Truck 5502 Rating : 1 x 9V size battery No. of sample(s) : One(1) piece *** Date Received : 2002 May 02. Test Period : 2002 May 02 – 2002 May 29. Test Requested : FCC Part 15 Certification Test Method : FCC Rules and Regulations Part 15 – May 2001 ANSI C63.4 – 1992 Test Result : See attached sheet(s) from page 2 to 10. Conclusion : The submitted sample was found to comply with requirement of FCC Part 15 Subpart C. Remark : All 703, 9248 and 9248B models are the same in circuitry and components; and therefore model 702 was chosen to be the representative of the test sample. For and on behalf of CMA Testing and Certification Laboratories Authorized Signature : Page 1 of 10 Danny Chui EMC Engineer - EL. Division FCC ID : QEATX27 This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1401-3, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AC006108 Date : 2002 June 08 Table of Contents 1 General Information ..................................................................................................................... 3 1.1 General Description ................................................................................................................ 3 1.2 Related Submittal Grants........................................................................................................ 3 1.3 Location of the test site........................................................................................................... 4 1.4 List of measuring equipment .................................................................................................. 5 2 Description of the radiated emission test ..................................................................................... 6 2.1 Test Procedure ........................................................................................................................ 6 2.2 Test Result .............................................................................................................................. 6 2.3 Radiated Emission Measurement Data................................................................................... 7 3 Description of the Line-conducted Test ....................................................................................... 8 3.1 Test Procedure ........................................................................................................................ 8 3.2 Test Result .............................................................................................................................. 8 3.3 Graph and Table of Conducted Emission Measurement Data................................................ 8 4 Photograph.................................................................................................................................... 9 4.1 Photographs of the Test Setup for Radiated Emission and Conduction Emission ................. 9 4.2 Photographs of the External and Internal Configurations of the EUT.................................... 9 5 Supplementary document .............................................................................................................. 9 5.1 Bandwidth............................................................................................................................... 9 6 Appendices .................................................................................................................................. 10 Page 2 of 10 FCC ID : QEATX27 This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1401-3, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AC006108 Date : 2002 June 08 1 General Information 1.1 General Description The equipment under test (EUT) is a transmitter for My First RC – Airplane, model : 5500, operating at 27.145 MHz which is controlled by a LC circuit. The EUT is powered a 9V size battery. The EUT has two main buttons to control forward and spin movement. The brief circuit description is listed as follows : - Q1, Q2 and associated circuit act as encoding - C18, C23, L3, Q3 and associated circuit act as oscillation - Q3 and associated circuit act as modulation and amplification The model(s) 5501, 5502 are the same as model 5500 in Transmitter part. The difference in model numbers serves different outlook of receivers. 1.2 Related Submittal Grants The receiver for this transmitter is exempted from the Part 15 technical rules per 15.101(b). Page 3 of 10 FCC ID : QEATX27 This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1401-3, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AC006108 Date : 2002 June 08 1.3 Location of the test site Radiated emissions measurements are investigated and taken pursuant to the procedures of ANSI C63.4 – 1992. An Open Area Testing Site is set up for investigation and located at : Top of the Roof, Yan Hing Centre, 9 – 13 Wong Chuk Yeung Street, Fo Tan, Shatin, New Territories, Hong Kong. Conducted emissions measurements are investigated and also taken pursuant to the procedures of ANSI C63.4 – 1992. A double shielded room is located at : Roof Floor, Yan Hing Centre, 9 – 13 Wong Chuk Yeung Street, Fo Tan, Shatin, New Territories, Hong Kong. Page 4 of 10 FCC ID : QEATX27 This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1401-3, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AC006108 Date : 2002 June 08 1.4 List of measuring equipment Calibration Calibration Calibration Equipment Manufacturer Model No. Serial No. Certification Date Due Date No. EMI Test R&S ESCS30 100001 20-69223 Mar. 21, 2001 Sept. 20, 2002 Receiver Broadband Schaffner CBL6113B 2718 AC1753 Dec. 15, 2000 Jun. 14, 2002 Antenna Signal IFR 2023B 202302/938 Nil Oct. 23, 2000 Oct. 22, 2002 Generator LISN R&S ESH3-Z5 100010 20-70405 Mar. 29, 2001 Sept. 28, 2002 Pulse Limiter R&S ESH3-Z2 100001 20-73194 May 2, 2001 Nov. 1, 2002 Biconical R&S HK116 837414/004 4000.7752.02 Oct. 23, 2000 Oct. 22, 2002 Antenna Page 5 of 10 FCC ID : QEATX27 This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1401-3, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AC006108 Date : 2002 June 08 2 Description of the radiated emission test 2.1 Test Procedure Radiated emissions measurements are investigated and taken pursuant to the procedures of ANSI C63.4 – 1992. The equipment under test (EUT) was placed on a non-conductive turntable with dimensions of 1.5m x 1m and 0.8m high above the ground. 3m from the EUT, a broadband antenna mounting on the mast received the signal strength. The turntable was rotated to maximize the emission level. The antenna was then moving along the mast from 1m up to 4m until no more higher value was found. Both horizontal and vertical polarization of the antenna were placed and investigated. 2.2 Test Result The fundamental emission was based on measurements employing the peak detector on the open area test site. The harmonic emissions meeting the requirement of section 15.209 are based on measurements employing the CISPR qusai-peak detector. * Emissions appearing within the restricted bands shall follow the requirement of section 15.205. It was found that the EUT meet the FCC requirement. Page 6 of 10 FCC ID : QEATX27 This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1401-3, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AC006108 Date : 2002 June 08 2.3 Radiated Emission Measurement Data Radiated emission pursuant to the requirement of FCC Part 15 subpart C Frequency Polarity Reading at Antenna and Field Limit at 3m Margin (MHz) (H/V) 3m (dBµV/m) Cable factor Strength (dBµV/m) (dB) (dB) (dBµV/m) 27.145 V 42.7 17.4 60.1 80.0 -19.9 54.336 V 16.4 10.4 26.8 40.0 -13.2 81.504 V 20.6 10.0 30.6 40.0 -9.4 *108.672 V 15.5 14.2 29.7 43.5 -13.8 *135.840 V 13.1 15.4 28.5 43.5 -15.0 *163.008 V 17.6 13.6 31.2 43.5 -12.3 190.176 V 19.0 13.4 32.4 43.5 -11.1 217.344 V 14.6 14.2 28.8 46.0 -17.2 *244.512 V 18.6 14.2 32.8 46.0 -13.2 *271.680 V 12.2 17.5 29.7 46.0 -16.3 Page 7 of 10 FCC ID : QEATX27 This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1401-3, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AC006108 Date : 2002 June 08 3 Description of the Line-conducted Test 3.1 Test Procedure Conducted emissions measurements are investigated and also taken pursuant to the procedures of ANSI C63.4 – 1992. The EUT was setup as described in the procedures, and both lines were measured. 3.2 Test Result No measurement is required as the EUT is a battery-operated product. 3.3 Graph and Table of Conducted Emission Measurement Data Not Applicable Page 8 of 10 FCC ID : QEATX27 This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1401-3, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AC006108 Date : 2002 June 08 4 Photograph 4.1 Photographs of the Test Setup for Radiated Emission and Conduction Emission For electronic filing, the photos are saved with filename TSup1.jpg to TSup2.jpg 4.2 Photographs of the External and Internal Configurations of the EUT For electronic filing, the photos are saved with filename ExtPho1.jpg to ExtPho2.jpg and IntPho1.jpg to IntPho2.jpg. 5 Supplementary document The following document were submitted by applicant, and for electronic filing, the document are saved with the following filenames: Document Filename ID Label/Location LabelSmpl.pdf Block Diagram BlkDia.pdf Schematic Diagram Schem.pdf Users Manual UserMan.pdf Operational Description OpDes.pdf 5.1 Bandwidth The plot on saved in TestRpt2.pdf shows the fundamental emission is confined in the specified band. It also shows that the band edge met the 15.229 requirement 26.9599 and 27.2801MHz. Page 9 of 10 FCC ID : QEATX27 This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1401-3, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AC006108 Date : 2002 June 08 6 Appendices A1 Photos of the set-up of Radiated Emissions 1 page A2 Photos of External Configurations 1 page A3 Photos of Internal Configurations 1 page A4 ID Label/Location 2 pages A5 Block Diagram 1 page A6 Schematics 1 page A7 User Manual 2 pages A8 Operation Description 1 page A9 Bandwidth Plot 1 page ***** End of Report ***** Page 10 of 10 FCC ID : QEATX27 This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1401-3, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com


Document Created: 2002-06-11 16:26:58
Document Modified: 2002-06-11 16:26:58
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC