TCB Service Agreement

FCC ID: QEASUVPLANE49

Cover Letter(s)

Download: PDF

FCCID_691558

MET TCB SERVICE AGREEMENT

THIS AGREEMENT is made at Baltimore, Maryland this day of , 20 , by and between MET LABORATORIES, INC.
(hereinafter referred to as MET) and the following:

Applicant: Kid Galaxy Inc.
(Hereinafter referred to as the "Responsible Party")

Address: One Sundial Ave, Suite 310Manchester, NH 03103, U.S.A.

Manufacturer: Lung Cheong Toys Ltd.
(required for Part 68 only - (Hereinafter referred to as the "Manufacturer")

Address: Lung Cheong Building, 1 Lok Yip Road On Lok Tsuen, Fanling, N.T., Hong Kong

Only the product(s) designed and engineered by the Applicant/Responsible Party and manufactured by the Manufacturer
at the Manufacturer's facility at the above address, which have been certified by MET are covered by this service
Agreement.

NOW, THEREFORE, in consideration of the premises set forth in this agreement, the above mentioned parties agree that;

Upon successful evaluation, MET will issue the Applicant/Responsible Party a Grant of Equipment Authorization
Certificate, granting the Applicant/Responsible Party permission to market the certified product(s). At a minimum the
product's identification plate or label will include the FCC ID Number or the Registration/Certification Number as well as
any other information as might be required bystatute.

The FCC requires that MET perform random post-certification surveillance. Surveillance for continued certification
compliance can be accomplished by the Applicant/Responsible Party providing production models of the product to
MET at MET’s request or to other locations as approved by MET for the purpose of compliance testing. The
Manufacturer agrees to allow free and unrestricted access to the Manufacturer's facility during normal working hours for
the purpose of permitting supervision. The Applicant/Responsible Party or Manufacturer agrees to provide and deliver to
MET or locations approved by MET models of the certified product at MET’s request. All costs associated with testing of
the device will be borne by the Applicant/Responsible Party or the Manufacturer and paid within 30 days of notice. If
required the Applicant/Responsible Party agrees to provide to MET for MET review certain identified technical
documents or quality documents that provide for a review of product update and compliance.

Acceptable Markings are found in 47 CFR 2.925, 2.926, 15.19, and part 68.300. Only products visually bearing the
appropriate FCC identification label and identified as to model and type will be acknowledged as being an authorized
product.

The Applicant/Responsible Party is responsible for applying the label to the product in accordance with current FCC
requirements. An Applicant/Responsible Party is required to submit to MET a sample of the label or plate showing the
FCC ID Number or the Registration/Certification Number for approval prior to applying to the product. The
Applicant/Responsible Party is required to submit to MET a label location drawing or photograph showing the location of
the mark on the product.

Any reference to MET certification shall not be permitted on any non-eligible product(s), packaging, or literature. If the
Applicant/Responsible Party or the Manufacturer applies the FCC identification label to unauthorized products, then the
Applicant/Responsible Party and the Manufacturer shall save, indemnify, and hold harmless MET LABORATORIES,
INC. from any and all claims which may arise out of said unauthorized action.

The label and/or references to MET are permitted on promotional, advertising, and packaging of Certified Product(s)
provided that misrepresentation of results of the marking process and/or this agreement do not occur. Final judgment in
the suitability of use of the label or the MET Laboratories name is reserved by MET.

(continued, next page)

DOCJ-TCB002 11/24/04 Page 1 of 3

MET TCB SERVICE AGREEMENT

The Applicant/Responsible Party shall maintain or require the manufacturer to maintain a record of all complaints made
known to them relating to the product's compliance with the requirements of the relevant standard and agrees to make
these records available to MET when requested. The Aplicant/Responsible Party agrees to take appropriate action, or
have the manufacturer take appropriate action with respect of such complaints and/or any deficiencies found in products
or services that affect compliance with the requirements for certification.

Compliance with all requirements and stipulations of the Certification Program and this agreement between MET and the
Applicant/Responsible Party is required for program compliance. Non-compliance with all or part of this agreement may
result in termination of the agreement and the notification to the FCC to withdraw certification of the product.

The Applicant/Responsible Party assumes responsibility for complying with the requirements of the product's
certification and this agreement regarding the application of the FCC identification label. The Applicant/Responsible
Party understands that any violation of the requirements of this agreement can immediately, at MET's discretion,
terminate this agreement.

Upon notification by MET, the Applicant/Responsible Party shall immediately take action to correct non-conformance
that may have been found during surveillance or during modification to the product by the Applicant/Responsible Party.
The Applicant/Responsible Party understands that corrective actions must be immediate. The Applicant/Responsible
Party also understands that MET is required to report to the FCC any noted non-compliance. MET will also report
corrective actions taken and the status of corrective action. The FCC will determine if any certificate or grants will be
withdrawn.

Upon termination of this agreement, the Applicant/Responsible Party agrees to remove any references to MET
Laboratories from all literature, stationary, packaging, or other promotional media as may have been used by the
Applicant/Responsible Party. Additionally, upon termination of this agreement, MET Laboratories will inform the FCC
of such termination.

The observance of the aforementioned requirements for the product, is a condition for continued use of the FCC
identification label. However, MET assumes no responsibility of the Applicant/Responsible Party or the Manufacturer or
any other party resulting out of the sale or use of the product.

The Applicant/Responsible Party acknowledges that unpaid debts due to MET Laboratories by the
Applicant/Responsible Party are reason to terminate this agreement.

This agreement shall continue in effect for the balance of the initial Agreement year and shall automatically be renewed
thereafter for periods of one year from January 1, unless the MET TCB Service Agreement for the product is terminated
and/or any party to this agreement gives not less than thirty (30) days written notice of the termination. Termination of
this agreement does not affect any responsibilities of MET, the Applicant/Responsible Party, or the Manufacturer prior to
the termination date.

The Applicant/Responsible Party shall maintain or require the manufacturer to maintain a record of all complaints made
known to them relating to the product's compliance with the requirements of the relevant standard and agrees to make
these records available to MET when requested. The Aplicant/Responsible Party agrees to take appropriate action, or
have the manufacturer take appropriate action with respect of such complaints and/or any deficiencies found in products
or services that affect compliance with the requirements for certification.

Compliance with all requirements and stipulations of the Certification Program and this agreement between MET and the
Applicant/Responsible Party is required for program compliance. Non-compliance with all or part of this agreement may
result in termination of the agreement and the notification to the FCC to withdraw certification of the product.

The Applicant/Responsible Party assumes responsibility for complying with the requirements of the product's
certification and this agreement regarding the application of the FCC identification label. The Applicant/Responsible
Party understands that any violation of the requirements of this agreement can immediately, at MET's discretion,
terminate this agreement.

Upon notification by MET, the Applicant/Responsible Party shall immediately take action to correct non-conformance
that may have been found during surveillance or during modification to the product by the Applicant/Responsible Party.
The Applicant/Responsible Party understands that corrective actions must be immediate. The Applicant/Responsible
Party also understands that MET is required to report to the FCC any noted non-compliance. MET will also report

DOCJ-TCB002 11/24/04 Page 2 of 3

Document Created: 2019-10-28 08:05:16
Document Modified: 2019-10-28 08:05:16

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC