User Manual

FCC ID: QEA-V039-2G4R

Users Manual

Download: PDF
FCCID_3871419

Item number.: 10318 CONTROLLER: FORWARD/REVERSE 1. Pull inward on lever of transmitter to propel FORWARD QUICK vehicle forward. 2. Release lever to neutral position to allow POWER ON START car to stop. 3. Push outward on lever of transmitter to GUIDE propel vehicle in reverse. 4. Avoid moving lever inward or outward without allowing vehicle to come to a complete stop. CHARGE THE BATTERY CONTROLLER BATTERY INSTALLATION REVERSE The included charger is designed to charge the included 20V battery. Install included AAA batteries into controller. FORWARD Allow for at least a 3 hrs and 45 mins charge before use. Alternatively, you can use any fully charged 20 volt compatible battery from Black & Decker, Dewalt, Porter-Cable, or Stanley. Many 20V batteries from these manufacturers that are under 3.0Ah should fit. 1. Attach the charger to the 20v battery. 2. Plug charger in wall. REVERSE 3. Battery is charging and shows level of charge as lights blink. Fully charged when lights are solid. CONTROLLER: TURNING TURN LEFT TURN RIGHT Turn wheel to change direction while traveling. CHARGE TIME: 3 hours and 45 minutes TURN LEFT TURN RIGHT UNLOCK VEHICLE SURFACE Remove vehicle surface locks/pins. To re-attach body, push pins all the way to lock body in place. POST RACE FORWARD Turn vehicle off. Disconnect battery from vehicle and remove it. Turn transmitter off. Live to race another day. WARNING: LOAD THE BATTERY RELEASE BATTERY HIGH PERFORMANCE MOTOR ALLOW MOTOR TO COOL PROLONGS BATTERY USE SAFETY FIRST Press the lock at the end Do not overload the motor in MOTOR LIFE Included battery should be charged You are the owner of an extremely of the battery to release branches, sand, mud, swamps, etc. Periodically, allow the motor and only with included charger. Use of powerful radio control product. from the car. that prevent the car from moving battery to cool between races. Use compatible 20 volt batteries that fit Use with care to avoid product and creates extra work for the motor. of a higher amperage battery requires is encouraged, and these batteries damage or personal injury. When car is stuck, avoid running intermittent breaks. If the motor should only be charged with their the motor repeatedly. Walk to vehicle is very hot to the touch, discontinue respective charger. Flip battery Push until (sorry) and remove the vehicle use until the motor has cooled. connecter mechanism as it does not “CLICKS” from the obstacle. lock into place. If not aligned, battery cannot be installed. EXTREMELY POWERFUL VEHICLE. ONLY USE OUTDOORS IN LARGE, OPEN AREA. CAN BE USED ON AREAS WITH SHORT GRASS, SMALL ROCKS, DIRT AND SAND. TROUBLESHOOT HELP. CALL US! 1-800-816-1135 or email: customerservice@kidgalaxy.com Examine battery charger regularly for any damage to cord, plug, enclosure, and other parts. In the event of such damage, discontinue use until repaired.

ROTATE ADAPTER/ALTERNATE BATTERY INSTALLATION TURN ON/ADJUST VEHICLE Adapter is aligned for included battery and power packs from Always turn on transmitter before turning on vehicle. LED on transmitter will illuminate. Black & Decker ™, Make sure all motors are functional and car can turn left/right. Stanley Fat Max®, Front wheels should face forward and if not, adjust steering trim until they point forward. or Porter Cable®. 1. Align arrows. 2. Load battery. 2 1 Turn to “ON” position 2 Turn to “ON” position 1 Just flip adapter for use with DeWalt® power packs. TROUBLESHOOT TIPS 1. Align arrows. 1. If the vehicle is not moving, turn the “ON/OFF” switch on the CONTROLLER and the VEHICLE to the “OFF” position. Powering down for 10 seconds for reset purposes. 2. Load battery. 2. Turn both power switches to “ON” again to play. 2 CONTROLLER TRIM ADJUSTMENT Before each use - adjust the trim adjustment knob so that the front wheels are rolling in a straight line 1 TURN WHEELS MORE POWER ON TURN LEFT TO THE LEFT TRIM KNOB POWER OFF TURN RIGHT TURN WHEELS MORE TO THE RIGHT Changes or modifications not expressly approved by the party responsible for compliance particular installation. could void the user’s authority to operate the equipment. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to This equipment has been tested and found to comply with the limits for a Class B digital correct the interference by one or more of the following measures: device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide -- Reorient or relocate the receiving antenna. reasonable protection against harmful interference in a residential installation. This -- Increase the separation between the equipment and receiver. equipment generates, uses and can radiate radio frequency energy and, if not installed and -- Connect the equipment into an outlet on a circuit different from that to which the receiver BACKWARD used in accordance with the instructions, may cause harmful interference to radio is connected. communications. However, there is no guarantee that interference will not occur in a -- Consult the dealer or an experienced radio/TV technician for help. FORWARD The battery adaptor does not lock into place. Alignment critical for proper battery installation. Black & Decker ™, Stanley Fat Max®, Porter Cable®, DeWalt® are trademarks of Stanley Black & Decker, Inc. 20V Power Drive is not manufactured or distributed by Stanley Black & Decker, Inc.


Document Created: 2018-05-18 18:12:11
Document Modified: 2018-05-18 18:12:11
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC