SAR Test Report 2

FCC ID: QDMPPE12

RF Exposure Info

Download: PDF
FCCID_3076790

KCTL Report No.: KCTL16—SFAOOLL Page: 1 of 19 http:/www.ketl.co.kr Appendix A. Calibration certificate A.1 Probe Calibration certificate Calibration Laboratory of Schweizerischer Kalibrierdionst w o o Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zoughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration cortificates Client KCTL (Dymstec) Cortificate No: EX3—3928_Jan16 CALIBRATION CERTIFICATE Object EX3DV4 — SN:3928 Calibration procedure(s) QA CAL—01.v9, QA CAL—12.v9, QA CAL—14.v4, QA CAL—23.v5, QA CAL—25.v6 Calibration procedure for dosimetric E—field probes Calibration date: January 28, 2016 This callbration certiicate documents the traceablty to national standards, which realizethe physical units of measurements (S1). The measurements and the uncertainties with confidence probabilty are given on the following pages and are part of the certificate. All callbrations have been conducted in the closed laboratory faciity: environment temperature (22 : 3)°C and humidity < 70%. Callbration Equipment used (M&TE crtical for callbration) Primary Standards io Cal Date (Certficate No.) Scheduled Calioration Power meter E44198 ceetzossr4 01—Apr—15 (No. 217—02128) Mar—16 Power sensor E4412A mva14g8087 O1—Apr—15 (No. 217—02128) Mar—16 Reference 3 dB Attenuator SN: ss084 (Gc) O1—Apr—15 (No. 217—02129) Mar—16 Reference 20 dB Aftenuator SN: 5277 (20%) O1—Apr—15 (No. 217—02132) Mar—16 Reference 30 dB Aftenuator SN: 5129 (30b) 01—Apr—15 (No. 217—02133) Mar—16 Reference Probe ESSDV2 sh: sos 31—Dec—15 (No. ES3—8013_Dect5) Dec—16 Dae4 sh: ee0 23—Dec—15 (No. DAE4—660_Dect5) Dec—16 Secondary Standards 10 Check Date (in house) Scheduled Check RF generator HP 8648C Ussea2u01700 4—Aug—99 (in house chack Apr—13) in house check: Apr—16 Network Analyzer HP 8753E US37300585 18—0ct—01 (in house check Oct—15) in house check: Oct—16 Name Function Signature Calibrated by: Leif Klysner Laboratory Technician W fl/n Approved by: Kata Pokovie Technical Manager //f4 Issued: January 29, 2016 This calibration certficate shall not be reproduced except in full without written approval of the laboratory. Certficate No: EX3—3928_Jan16 Page 1 of 11 KCTL Inc. 65, Sinwon—ro, Yeongtong—gu, Suwon—si, Gyeonggi—do, 16677, Korea TEL: $2705008 1021 FAX: 8250529 8311 This test report shall not be reproduced, except in full, without the written approval. KCTL—TIAOO2—002/1

Report No.: KCTL16—SFAOOLL Page: 2 of 19 http:/www.kctl.co.kr Calibration Laboratory of wth ‘ sio Schweizerischer Kalibrierdienst Schmid & Partner ;B%EQ (S: Service suisse détalonnage Engineering AG 2e Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland fi B Swiss galibration Service blads Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid NORMxy,z sensitivity in free space ConvF sensitivity in TSL / NORMx,y,z DCP diode compression point CF crest factor (1/duty._cycle) of the RF signal A, B, C, D modulation dependentlinearization parameters Polarization ip rotation around probe axis Polarization 8 8 rotation around an axis that is in the plane normal to probe axis (at measurement center), i.e., 8 = 0 is normal to probe axis Connector Angle information used in DASY system to align probe sensor X to the robot coordinate system Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial—Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques®, June 2013 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)®, February 2005 c) IEC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)®, March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Methods Applied and Interpretation of Parameters: NORMxy,z: Assessed for E—field polarization 8 = 0 (f < 900 MHz in TEM—cell; > 1800 MHz: R22 waveguide). NORMx,y,z are only intermediate values, i.e., the uncertainties of NORMx,y,z does not affect the E*—field uncertainty inside TSL (see below ConvF). NORM(Mx.y,z = NORMxy,z * frequency_response (see Frequency Response Chart). This linearization is implemented in DASY4 software versionslater than 4.2. The uncertainty of the frequency response is included in the stated uncertainty of ConvF. DCPxy,z: DCP are numerical linearization parameters assessed based on the data of power sweep with CW signal (no uncertainty required). DCP does not depend on frequency nor media. PAR: PAR is the Peak to Average Ratio that is not calibrated but determined based on the signal characteristics Axy.z Bxy,z; Cxy,z; Dxy.z; VRxy,z: A, B, C, D are numerical linearization parameters assessed based on the data of power sweep for specific modulation signal. The parameters do not depend on frequency nor media, VR is the maximum calibration range expressed in RMS voltage across the diode. ConvF and Boundary Effect Parameters: Assessed in flat phantom using E—field (or Temperature Transfer Standard for f < 800 MHz) and inside waveguide using analytical field distributions based on power measurements for f > 800 MHz. The same setups are used for assessment of the parameters applied for boundary compensation (alpha, depth) of which typical uncertainty values are given. These parameters are used in DASY4 software to improve probe accuracy close to the boundary. The sensitivity in TSL corresponds to NORMx,y,z * ConvF whereby the uncertainty corresponds to that given for ConvF. A frequency dependent ConvF is used in DASY version 4.4 and higher which allows extending the validity from + 50 MHz to + 100 MHz. Spherical isotropy (3D deviation from isotropy): in a field of low gradients realized using a flat phantom exposed by a patch antenna. Sensor Offset: The sensor offset corresponds to the offset of virtual measurement center from the probe tip (on probe axis). No tolerance required. Connector Angle: The angle is assessed using the information gained by determining the NORMx (no uncertainty required). Certificate No: EX3—3928_Jan16 Page 2 of 11 KCTL Inc. 65, Sinwon—ro, Yeongtong—gu, Suwon—si, Gyeonggi—do, 16677, Korea TEL: 82705008 1021 FAX: 825052998311 This test report shall not be reproduced, except in full, without the written approval. KCTL—TIAOO2—002/1

Report No.: KCTL16—SFAOOLL Page: 3 of 19 http:/www.kctl.co.kr EX3DV4 — SN:3928 January 28, 2016 Probe EX3DV4 SN:3928 Manufactured: March 8, 2013 Calibrated: January 28, 2016 Calibrated for DASY/EASY Systems (Note: non—compatible with DASY2 system!) Certficate No: EX3—3928_Jan16 Page 3 of 11 KCTL Inc. 65, Sinwon—ro, Yeongtong—gu, Suwon—si, Gyeonggi—do, 16677, Korea TEL: 82705008 1021 FAX: 825052998311 This test report shall not be reproduced, except in full, without the written approval. KCTL—TIAOO2—002/1

Report No.: KCTL16—SFAOOLL Page: 4 of 19 http:/www.kctl.co.kr EX3DV4— SN:3028 January 28, 2016 DASY/EASY — Parameters of Probe: EX3DV4 — SN:3928 Basic Calibration Parameters Sensor X Sensor Y Sensor 2 Une (k=2) Norm (uVi(Vim)?) 0.50 0.23 0.57 £10.1% DCP (mV)" 94.6 93.0 95.9 Modulation uib Calibration Communicati Parameters on System Name A B 6 b VR Une dB dByLV dB mV (k=2) 0 ow x 0.0 0.0 1.0 0.00 1390 227% y |_o0 0.0 10 150.9 2z 0.0 0.0 10 154.7 The reported uncertainty of measurement is stated as the standard uncertainty of measuremen t multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. * The uncertainties of Norm X,Y,Z do not affect the E*—eld uncertainty inside TSL (see Pages 5 and 6). * Numerical Inearization parameter: uncertainty not required. * Uncertainty is determined using the max. deviation from linear response applying rectangular distrbution and is expressed for the square of the field value. Certficate No: EX3—3928_Jan16 Page 4 of 11 KCTL Inc. 65, Sinwon—ro, Yeongtong—gu, Suwon—si, Gyeonggi—do, 16677, Korea TEL: 82705008 1021 FAX: 82505299 8311 This test report shall not be reproduced, except in full, without the written approval. KCTL—TIAOO2—002/1

Report No.: KCTL16—SFAOOLL Page: 5 of 19 http:/www.kctl.co.kr EX3DV4— SN:3028 January 28, 2016 DASY/EASY — Parameters of Probe: EX3DV4 — SN:3928 Calibration Parameter Determined in Head Tissue Simulating Media Emss Pefri':li;t_iv_e P ConducliFvity s Depth © Unc“ ivity (Sim) ConvFX ConvFY ConvFZ Aipha (mm) (k=2) 300. 45.3 0.87 11.24 11.24 11.24 0.09 110 £133% 450 43.5 0.87 10.15 10.15 10.15 0.15 1.60 £13.3 % 750 41.9 0.89 9.86 9.86 9.86 0.29 1.00 £12.0 % 850 41.5 0.92 9.29 9.29 9.29 0.16 2.26 £12.0 % 900 41.5 0.97 9.26 9.26 9.26 0.26 1.22 £12.0 % 1750 40.1 1.97 8.17 8.17 8.17 0.28 0.88 £12.0 % 1900 40.0 1.40 7.87 7.87 7.87 0.25 1.03 *12.0 % 2300 30.5 1.67 749 749 7.49 0.26 1.00 £120% 2450 30.2 1.80 7.28 7.28 7.28 0.36 0.83 £12.0 % 2600 30.0 1.96 7.00 7.00 7.00 0.37 0.89 +120 % 5200 36.0 4.66 5.20 5.20 5.20 0.30 1.80 £13.1% 5300 35.9 4.76 5.01 5.01 5.01 0.30 1.80 £13.1% 5500 35.6 4.96 4.83 4.83 4.83 0.35 1.80 £13.1% 5600 35.5 5.07 4.41 4.41 4.41 0.45 180 £131% 5800 35.3 5.27 4.63 4.63 4.63 0.40 1.80 £13.1% © Frequency validty above 300 MHz of + 100 MHz only applies for DASY v4.4 and higher (see Page 2), else it is restricted to + 50 MHz. The uncertainty is the RSS of the ConvE uncertainty at calbration frequency and the uncertainty for indicated frequency band. Frequency validty below 300 Miiz is + 10, 25, 40, 80 and 70 MH for Convassessments at 30, 64, 128, 150 and the 220 MHz respectively. Above 5 GHz frequency validty can be extended to + 110 MHz " At frequencies below 3 GHz, the validity of issue parameters (c and 0) can be relaxed to + 10% if iquid compensation fomula is applied to measured SAR values. At frequencies above 3 GHz, the validity of tssue parameters (s and 0)is restrcted to + 5%. The uncertainty is the RSS of the Cony uncertainty for indicated target tssue parameters. * AlphalDepth are determined during callbration. SPEAG warrants that the remaining deviation due to the boundary effect after compensation is always less than + 1% forfrequencies below 3 GHz and below + 2% for frequencies between 3—6 GHz at any distancelarger than half the probe tip diameter from the boundary. Certificate No: EX3—3028_Jan16 Page 5 of 11 KCTL Inc. 65, Sinwon—ro, Yeongtong—gu, Suwon—si, Gyeonggi—do, 16677, Korea TEL: 82705008 1021 FAX: 825052998311 This test report shall not be reproduced, except in full, without the written approval. KCTL—TIAOO2—002/1

Report No.: KCTL16—SFAOOLL Page: 6 of 19 http:/www.kctl.co.kr EX3DV4— SN:3028 January 28, 2016 DASY/EASY — Parameters of Probe: EX3DV4 — SN:3928 Calibration Parameter Determined in Body Tissue Simulating Media Relative Conductivity Depth® Une £(MHz)* _|_Permittivity" (Sim)" ConvFX ConvFY ConvFZ Aipha®| _(mm) (Kk=2) 300 58.2 0.92 10.81 10.81 10.81 0.06 1.15 £13.3 % 450 56.7 0.94 10.59 10.59 10.50 0.08 1.20 £13.3% 750 55.5 0.96 9.52 9.52 9.52 0.49 0.84 *12.0 % 850 55.2 0.99 9.30. 9.30. 9.30 0.29 1.16 £12.0 % 900. 55.0 1.05 9.09 9.09 9.09 0.24 1.32 £12.0 % 1750 53.4 1.49 7.89 7.89 7.89 0.44 0.80 £12.0 % 1900 53.3 1.52 7.64 7.64 7.64 0.41 0.85 £12.0 % 2300 52.9 1.81 741 741 741 0.34 0.88 £12.0 % 2450 52.7 1.95 7.20 7.20 7.20 0.30 0.95 £12.0 % 2600 52.5 2.16 6.96 6.96 6.96 0.33 0.99 £12.0 % 5200 49.0 5.30 4.27 4.27 4.27 0.50 1.90 £13.1 % 5300 48.9 542 4.12 4.12 4.12 0.50 1.90 £13.1% 5500 48.6 5.65 3.76 3.76 3.76 0.55 1.90 £13.1% 5600 48.5 5.77 3.47 3.47 3.47 0.60 1.90 £13.1% 5800 48.2 6.00 3.72 3.72 372 0.60 1.%0 £13.1% © Frequency validty above 300 Miz of + 100 MHz only applies for DASY v4.4 and higher (see Page 2), else it is restricted to + 50 MHz. The uncertainty is the RSS ofthe ConvE uncertainty at calloration frequency and the betow 200 Miiz is # 10, 25, 40, 50 and 70 MH for Convassessments at 30, 64,uncertainty for the indicated frequency band. Frequency valdity 128, 150 and 220 MHz respectively. Above 5 GHz frequency valldty can be extended to : 110 MHz " At frequencies below 3 GHz, the validiy of issue parameters (c and 0) can be relaxed to + 10% it iquid compensation fomula is applied to measured SAR values. Atfrequencies above 3 GHz, the validity of issue parameters (s and 0)is resticted to + 5%. The uncertainty is the RSS of the Conv uncertainty for indicated target tssue parameters. " AlphalDepth are determined during callbration. SPEAG warrants that the remaining deviation due to the boundary effect after compensation is always less than + 1% for frequencies below 3 GHz and below + 2% for frequencies between 3—8 GHz at any distancelarger than half the probe tip diameter from the boundary. Certificate No: EX3—3028_Jan16 Page 6 of 11 KCTL Inc. 65, Sinwon—ro, Yeongtong—gu, Suwon—si, Gyeonggi—do, 16677, Korea TEL: 82705008 1021 FAX: 825052998311 This test report shall not be reproduced, except in full, without the written approval. KCTL—TIAOO2—002/1

Report No.: KCTL16—SFAOOLL Page: 7 of 19 http:/www.kctl.co.kr EXSDV4~ SN:3028 January 28, 2016 Frequency Response of E—Field Frequency response (normalized) (TEM—Cell:fi110 EXX, Waveguide: R22) 05 :\Illii\\\ill<\%\\\\i\\li\\I;\ 0 500 1000 1500 2000 2500 3000 1 [MHz] & (+] Rez Uncertainty of Frequency Response of E—field: £ 6.3% (k=2) Certficate No: EX3—3928_Jan16 Page 7 of 11 KCTL Inc. 65, Sinwon—ro, Yeongtong—gu, Suwon—si, Gyeonggi—do, 16677, Korea TEL: 82705008 1021 FAX: 825052998311 This test report shall not be reproduced, except in full, without the written approval. KCTL—TIAOO2—002/1

Report No.: KCTL16—SFAOOLL Page: 8 of 19 http:/www.kctl.co.kr EX3DV4— SN:3028 January 28, 2016 Receiving Pattern (¢), 9 = 0° f=600 MHz,TEM f=1800 MHz,R22 is no as * is ss * v 2 Eftor [dB] . Rol [ e c sc%!u TsWHz ZSWHZ Uncertainty of Axial Isotropy Assessment: £ 0.5% (k=2) Certficate No: EX3—3928_Jan16 Page 8 of 11 KCTL Inc. 65, Sinwon—ro, Yeongtong—gu, Suwon—si, Gyeonggi—do, 16677, Korea TEL: 82705008 1021 FAX: 825052998311 This test report shall not be reproduced, except in full, without the written approval. KCTL—TIAOO2—002/1

KCTL http:/www.kctl.co.kr Report No.: KCTL16—SFAOOLL Page: 9 of 19 EX3DV4— SN:3028 January 28, 2016 Dynamic Range f(SARneaq) (TEM cell , fayai= 1900 MHz) 105 10b Input Signal (uV] 18hagialolt 102 10" 10° 102 101 10° 10 10 10 SAR [mWiem3] * & not compensated mm%lsated e a Error [dB] oto 102 104 108 1ot 102 103 5 SAR [mWiem3] 4d not compensated compensated Uncertainty of Linearity Assessment: £ 0.6% (k=2) Certificate No: EX3—3028_Jan16 Page 9 of 11 KCTL Inc. 65, Sinwon—ro, Yeongtong—gu, Suwon—si, Gyeonggi—do, 16677, Korea TEL: 82705008 1021 FAX: 82505299 8311 This test report shall not be reproduced, except in full, without the written approval. KCTL—TIAOO2—002/1

Report No.: KCTL16—SFAOOLL Page: 10 of 19 http:/www.kctl.co.kr EX3DV4— SN:3028 January 28, 2016 Conversion Factor Assessment £= 900 MHz,WGLS Ro (H_convr) 1= 1750 MHz,WGLS R22 (H_convF) s k ss ‘ nd $": . §"L \ & 0t < is 3 & : % $ | > is — | 10 > * 10| ‘ * osA | s % s w~Ca ($0 s C# O $ O n k &R w & % zin imnl l aitihe a « sitichs witth wiles Deviation from Isotropy in Liquid Error (6, 8), f= 900 MHz Deviation —10 —08 —06 ~0% ~02 o0 o2 04 06 o8 10 Uncertainty of Spherical Isotropy Assessment: £ 2.6% (k=2) Certficate No: EX3—3928_Jan16 Page 10 of 11 KCTL Inc. 65, Sinwon—ro, Yeongtong—gu, Suwon—si, Gyeonggi—do, 16677, Korea TEL: 82705008 1021 FAX: 825052998311 This test report shall not be reproduced, except in full, without the written approval. KCTL—TIAOO2—002/1

Report No.: KCTL16—SFAOOLL Page: 11 of 19 http:/www.kctl.co.kr EX3DV4— SN:3028 January 28, 2016 DASY/EASY — Parameters of Probe: EX3DV4 — SN:3928 Other Probe Parameters Sensor Arrangement Triangular Connector Angle (°) 71 Mechanical Surface Detection Mode enabled Optical Surface Detection Mode disabled Probe Overall Length 337 mm Probe Body Diameter 10 mm Tip Length 9 mm Tip Diameter 2.5 mm Probe Tip to Sensor X Calibration Point 1 mm Probe Tip to Sensor Y Calibration Point 1 mm Probe Tip to Sensor Z Calibration Point 1 mm Recommended Measurement Distance from Surface 1.4 mm Certificate No: EX3—3928_Jan16 Page 11 of 11 KCTL Inc. 65, Sinwon—ro, Yeongtong—gu, Suwon—si, Gyeonggi—do, 16677, Korea TEL: 82705008 1021 FAX: 82505299 8311 This test report shall not be reproduced, except in full, without the written approval. KCTL—TIAOO2—002/1

KCTL http://www.ketl.co.kr Report No.: KCTL16—SFAOOL Page: 12 of 19 A.2 Dipole Calibration certification D2450V2 Calibration Laboratory of «s ues Schweizerischer imes Kalibrierdienst J6 ks P Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Adans® Aceredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certiicates Client EMC Compliance (Dymstec) Certificate No: D2450V2—895_Jul14 CALIBRATION CERTIFICATE Object D2450V2 — SN: 895 Calibration procedure(s) QA CAL—05.v9 Calibration procedurefor dipole validation kits above 700 MHz Calibration date: July 24, 2014 al* 4|43 =l+ « This calloration certficate documents the traceabiity to national standerds, whichh Yeglize the physical units d %/Z uremnts (S1) The measurements and the uncertainties wih contidence probabilty are given on the Tallowng pages andare part of fhe certiicate. All callorations have been conducted in the closed laboratory facilty: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE crtcalfor calbration) Primary Standards 1D # Cal Date (Certficate No.) Scheduled Calloration Power meter EPM—442A GB37430704 09—Oct—13 (No. 217—01827) Oct14 Power sensor HP 8481A uss7202783 09—Oct—13 (No. 217—01827) Oct14 Power sensor HP 8481A MY41082317 09—Oct—13 (No. 217—01828) Oct14 Reference 20 dB Attenuator SN: 5058 (204) 03—Apr—14 (No. 217—01918) Apri5 Type—N mismatch combination SN: 5047.2/ o6s27 03—Apr—14 (No. 217—01921) Apri5 Reference Probe ES3DV3 SN: 3205 30—Dec—13 (No. ES3—3205_Dec13) Dect4 DAE4 SN: 601 30—Apr—14 (No. DAE4—601_Aprid4) Apr15 Secondary Standards iD # Check Date (in house) Scheduled Check RF generator R&S SMT—06 100008 04—Auq—39 (in house check Oct—13) in house check: Oct—16 Network Analyzer HP 8759E Uss7305a5 S4206 18—0ct—0f (i house check Oct—13) in house check; Oct—14 Name Function Sighalur Calibrated by: Claudio Leubler Laboratory Technician Approved by: Ketja Pokovie Technical Manager //// IssuedtJuly24, 2014 This callration certficate shall not be reproduced except in full without writen approval othe laboratory. Certificate No: D245OV2—805_Jultd Page 1 of 8 KCTL Inc. 65, Sinwon—ro, Yeongtong—gu, Suwon—si, Gyeonggi—do, 16677, Korea TEL: 82705008 1021 FAX: 82505299 8311 This test report shall not be reproduced, except in full, without the written approval. KCTL—TIAO02—002/1

Report No.: KCTL16—SFAOOL Page: 13 of 19 http://www.ketl.co.kr Calibration A Laboratory of g Schweizerischer Kalibrierdienst Schmid & Partner _ Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland S swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Acereditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of callbration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear(frequency range of 300 MHz to 3 GHz)®, February 2005 c) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: d) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: * Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. * Antenna Parameters with TSL: The dipole is mounted with the spacerto position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. * Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. * Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. * SAR measured: SAR measured at the stated antenna input power. «_ SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. + SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurementis stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certiicate No: D2450V2—895_Jult4 Page 2 of 8 KCTL Inc. 65, Sinwon—ro, Yeongtong—gu, Suwon—si, Gyeonggi—do, 16677, Korea TEL: 82705008 1021 FAX: 82505299 8311 This test report shall not be reproduced, except in full, without the written approval. KCTL—TIAO02—002/1

KCTL http://www.ketl.co.kr Report No.: KCTL16—SFAOOL Page: 14 of 19 Measurement Conditions DASY system configuration, as far as not iven on page 1. DASY Version DASY5 V528.8 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 2450 MHza 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 39.2 1.80 mho/m Measured Head TSL parameters (22.0 £0.2) °C 37.8 26 % 1.85 mho/m 2 6 % Head TSL temperature change during test <0.5°C —— —— SAR result with Head TSL SAR averaged over 1 cm® (1 g) of Head TSL Condition SAR measured 250 mW input power 19.4 Whg SAR for nominal Head TSL parameters normalized to 1W 52.5 Wikg = 17.0 % (k=2) SAR averaged over 10 om* (10 g) of Head TSL condition SAR measured 250 mW input power 6.20 Wika SAR for nominal Head TSL parameters normalized to 1W 24.5 Wikg 2 16.5 % (k=2) Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 52.7 1.95 mho/m Measured Body TSL parameters (22.0 £0.2) °C 50.6 £6 % 2.03 mhoim + 6 % Body TSL temperature change during test <0.5°C m SAR result with Body TSL SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 250 mW input power 131 Wig SAR for nominal Body TSL parameters normalized to 1W 50.9 Wikg « 17.0 % (k=2) SAR averaged over 10 cm‘ (10 g) of Body TSL condition SAR measured 250 mW input power 6.01 Whg SAR for nominal Body TSL parameters normalized to 1W 23.6 Wikg £16.5 % (k=2) Certificate No: D2450V2—895_Jult4 Page3 of 8 KCTL Inc. 65, Sinwon—ro, Yeongtong—gu, Suwon—si, Gyeonggi—do, 16677, Korea TEL: 82705008 1021 FAX: 82505209 8311 This test report shall not be reproduced, except in full, without the written approval. KCTL—TIAO02—002/1

Report No.: KCTL16—SFAOOLL Page: 15 of 19 http://www.ketl.co.kr Appendix (Additional assessments outside the scope of SCS108) Antenna Parameters with Head TSL Impedance, transformed to feed point 58.0 0 + 1.6 j0 Return Loss —29.5 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 50.6 0 + 8.7 jQ Return Loss —28.7 dB General Antenna Parameters and Design [ Electrical Detay (one direction) | 1.157 ns ] After long term use with 100W radiated power, only a slight warming of the dipole nearthe feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions® paragraph. The SAR data are not affected by this change. The overall dipole length is stil according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on June 19, 2012 Certificate No: D245OV2—805_Jul14 Page 4 of 8 KCTL Inc. 65, Sinwon—ro, Yeongtong—gu, Suwon—si, Gyeonggi—do, 16677, Korea TEL: 82705008 1021 FAX: 82505299 8311 This test report shall not be reproduced, except in full, without the written approval. KCTL—TIA002—002/1

Report No.: KCTL16—SFAOOL Page: 16 of 19 http://www.ketl.co.kr DASY5 Validation Report for Head TSL Date: 24.07.2014 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN: 895 Communication System: UID 0 — CW; Frequency: 2450 MHz Medium parameters used: £= 2450 MHz; 0 = 1.85 $/m; , = 37.8; p= 1000 ke/m? Phantom section: Flat Section Measurement Standard: DASYS (IEEE/IEC/ANST C63.19—2011) DASY52 Configuration: * Probe: ES3DV3 — SN3205; ConyF(4.53, 4.53, 4.53); Calibrated: 30.12.2013; + Sensor—Surface: 3mm (Mechanical Surface Detection) * Electronics: DAE4 Sn601; Calibrated: 30.04.2014 + Phantom: Flat Phantom 5.0 (front); Type: QDOOOPSOAA; Serial: 1001 + DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Dipole Calibration for Head Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 102.2 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 27.9 W/kz SAR(I g) = 13.4 W/kg; SAR(10 g) = 6.2 W/kg Maximum value of SAR (measured) = 17.9 W/kg a2n arae aeas 0 dB = 17.9 W/kg = 12.53 dBW/kg Certificate No: D2450V2—805_Jultd Page 5 of 8 KCTL Inc. 65, Sinwon—ro, Yeongtong—gu, Suwon—si, Gyeonggi—do, 16677, Korea TEL: 82705008 1021 FAX: 82505299 8311 This test report shall not be reproduced, except in full, without the written approval. KCTL—TIAO02—002/1

Report No.: KCTL16—SFAOOLL Page: 17 of 19 http:/www.kctl.co.kr Impedance Measurement Plot for Head TSL 2s Jul zers d6:i4:40 CHI si1 i U Fs 3 53.045 a 1.§367 f} 106.32 pH 2 450.000 000 MHz & well be1 9 7 f h at \ o4 Ca ( , 3 ‘4 > $esd | ; *« \ * ~*% n j 4 16° A > HLd _ cn2 si1 Los. sde/Rgr_—20_a8 dgul ,js:—zs.qs as _2 150.000000 MHz., I } +——4 z_4 Ca aormmoescorofeencholc k. T = 1 i l__+_—‘4 4. fl:ifi%i—‘g‘—‘—‘ fvg m T 16° | f f f t broonnimichrrnccnccifhcce....hic.....1. Om E+.A } L } me IP | Lo 4 } C csw L pommodmensredenmn ST’F\R‘\T 72 250.000 000 Miz SToP 2 650.000 006 MHz Certificate No: D2450V2—805_Jult4 Page 6 of 8 KCTL Inc. 65, Sinwon—ro, Yeongtong—gu, Suwon—si, Gyeonggi—do, 16677, Korea TEL: 82705008 1021 FAX: 82505299 8311 This test report shall not be reproduced, except in full, without the written approval. KCTL—TIAOO2—002/1

Report No.: KCTL16—SFAOOL Page: 18 of 19 http://www.ketl.co.kr DASY5 Validation Report for Body TSL Date: 16.07.2014 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN: 895 Communication System: UID 0 — CW; Frequency: 2450 MHz Medium parameters used: £= 2450 MHz; 0 = 2.03 S/m; &, = 50.6; p = 1000 kg/m? Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANST C63.19—2011) DASY52 Configuration: * Probe: ES3DV3 — SN3205; ConvF(4.35, 4.35, 4.35); Calibrated: 30.12.2013; * Sensor—Surface: 3mm (Mechanical Surface Detection) «+ Electronics: DAE4 Sn601; Calibrated: 30.04.2014 * Phantom: Flat Phantom 5.0 (back); Type: QDOOOP50AA; Serial: 1002 «_ DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Dipole Calibration for Body Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurementgrid: dx=5mm, dy=5mm, dz=5mm Reference Value = 95.39 V/m; Power Drift = —0.00 dB Peak SAR (extrapolated) = 27.6 W/kg SAR(I g) = 13.1 W/kg; SAR(1O g) = 6.01 W/kg Maximum value of SAR (measured) = 17.3 W/kg 1000 1s0 —2000 asao 0 dB = 17.3 W/kg = 12.38 dBW/kg Certficate No: D2450V2—895_Jultd Page 7 of 8 KCTL Inc. 65, Sinwon—ro, Yeongtong—gu, Suwon—si, Gyeonggi—do, 16677, Korea TEL: 82705008 1021 FAX: 82505299 8311 This test report shall not be reproduced, except in full, without the written approval. KCTL—TIAO02—002/1

Report No.: KCTL16—SFAOOLL Page: 19 of 19 http:/www.kctl.co.kr Impedance Measurement Plot for Body TSL i6 gul zers ddr22ist CHI si1 i U Fs 1: 50.646 a 315(521 3 237.90 pH 2 450.000 008 MHz * 7 J Del % , \ Ca { *A {— 5m \ f — ‘ 1 ie° sko* HLd S on2 sir_ Los 5 dB/Rgr —20_ge A 41—28.554db_2150.000000 MHz fiomccclhc« farscmmfereesofhed Ees imne8 ce h cnommkarsee,udicesei hi olfecessou Ca % + fts | Hid |F | l,,,,‘_, mlgmrecurs rfinn on ommlcmaders StaRT 2 250.000 000 Miz SToP 2 £50.000 000 MHz Certificate No: D2450V2—805_Jult4 Page 8 of 8 KCTL Inc. 65, Sinwon—ro, Yeongtong—gu, Suwon—si, Gyeonggi—do, 16677, Korea TEL: 82705008 1021 FAX: 82505299 8311 This test report shall not be reproduced, except in full, without the written approval. KCTL—TIAOO2—002/1


Document Created: 2017-12-11 02:04:30
Document Modified: 2017-12-11 02:04:30
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC