Users Manual 1

FCC ID: QDMIFP799

Users Manual

Download: PDF
FCCID_407613

Hardware Instruction Manual Digital Audio player/ Recorder/FM Tuner Model iFP-700 Series iFP-700 Series Thank you for your purchase. Please read this manual carefully before using your new player. www.iRiver.com www.iRiver.com

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. 1

Contents GETTING STARTED 1 LOCATING THE CONTROLS 2 PC SOFTWARE INSTALLATION 3 BASIC OPERATION 4 CONVENIENT FUNCTIONS 5 ADDITIONAL INFORMATION 6 NOTE THIS MANUAL COVERS THE INSTALLATION AND USE OF THE PLAYER HARDWARE. FOR DETAILS REGARDING THE SOFTWARE OPERATION INCLUDING TRANSFERRING MUSIC TO THE PLAYER, PLEASE SEE THE SOFTWARE INSTRUCTION MANUAL.

GETTING STARTED CONTENTS Getting started... 1-1 INTERNET 1-2 FEATURES 1-3 ABOUT POWER SUPPLY NOTE THIS MANUAL COVERS THE INSTALLATION AND USE OF THE PLAYER HARDWARE. FOR DETAILS REGARDING THE SOFTWARE OPERATION INCLUDING TRANSFERRING MUSIC TO THE PLAYER, PLEASE SEE THE SOFTWARE INSTRUCTION MANUAL. 1

INTERNET FEATURES URL : www.iRiver.com Multi-Codec Player Supports MP3, WMA, OGG and ASF formats. Find information on our company, products, and customer and technical Firmware Upgrade Getting started... Getting started... support. Provides the latest updated features via firmware upgrade. Graphic LCD supporting Multiple Languages Update your player with firmware downloads. Firmware upgrades offer iFP-700 Series comes with graphic LCD which can support multiple languages (40 support for new CODECS and deliver new product features. languages). FM Function Consult the product FAQ. You can easily listen to FM stations and set your favorite stations by using Auto Preset and Frequency Memory functions. Register your iRiver product online so that our Customer Service is able to 6 Preset EQ : Normal, Rock, Jazz, Classic, U Bass, Metal provide support as efficiently as possible. Xtreme EQ and Xtreme 3D Customize your own EQ with Xtreme EQ and enhance bass and surround sound with All contents contained in this manual subject to change without notice to Xtreme 3D. improve ability of this player or according to changing of specification. GUI (Graphic User Interface) Menu System Simple Navigation Simple navigation makes it easy to find any song. iRiver Limited does not assume any responsibility for errors or omissions in this document or make any commitment to update the information contained Supports 8 levels of subfolders, 500 folders total and up to 1500 files at one time. herein. Create your own playlists. iRiver is a registered trademark of iRiver Limited in the Republic of Korea and Direct MP3 Encoding /or other countries and is used under license. Microsoft Windows Media and the 11.025KHz ~44.1KHz, 8Kbps ~ 320Kbps Windows Logo are trademarks or registered trademarks of Microsoft Record FM Radio, Voice, or line-in from another device Corporation in the United States and /or other countries. Voice record level is automatically controlled by AGC function. All other brand and product names are trademarks of their respective companies or organization. All other product names may be trademarks of the Convenient neck strap. companies with which they are associated. Supports USB 2.0 (iFP-780 Supports USB 1.1 only) 1999-2004 iRiver Limited. All rights reserved. 1-1 1-2

ABOUT POWER SUPPLY Locating the Controls Inserting a battery Contents Getting started... Open the battery cover. Insert the battery. (AA 1.5V type x 1ea) Be sure to match the + and - ends of the battery with the Locating the Controls diagram inside the battery compartment. Front View 2-1 Side View 2-2 Close the battery cover. LCD Screen 2-3 NOTE If the battery is worn out, “Low To avoid corrosion, remove the Battery” is displayed on the LCD. battery if the player is not to be used for a long time. THIS MANUAL COVERS THE INSTALLATION AND USE OF Insert a fresh battery. Remove dead battery immediately to NOTE avoid damage from corrosion. THE PLAYER HARDWARE. FOR DETAILS REGARDING THE When corrosion occurs, wipe the SOFTWARE OPERATION INCLUDING TRANSFERRING MUSIC battery compartment immediately with TO THE PLAYER, PLEASE SEE THE SOFTWARE a dry cloth and insert a new battery. INSTRUCTION MANUAL. 1-3 2

Locating the Controls Locating the Controls Front View Side View I (Next Track/Fast Forward) Locating the Controls Locating the Controls MIC LCD Screen Volume + USB Connection Port STEREO MODE/REC Power ON/OFF MEMORY/EQ / (Play/Stop) A-B (Interval repeat) NAVI/MENU HOLD Volume - I (Previous Track/Fast Reverse) Earphones Battery 2-1 2-2

Locating the Controls PC software installation LCD Screen Contents SONG PLAY NUMBER TIME PLAYBACK MODE HOLD 3-1 PC software installation Locating the Controls BATTERY INDICATOR FOLDER NAME 3-4 Attach the player PROGRAM ARTIST/TITLE NAME 3-7 Detach the player VOLUME BIT RATE EQUALIZER SAMPLE RATE VISUALIZATION NOTE THIS SECTION COVERS THE INSTALLATION FOR WINDOWS FILE FORMAT OPERATING SYSTEMS ONLY. FOR INSTALLATION INSTRUCTIONS FOR MAC OS, PLEASE SEE THE SOFTWARE ASF WMA IRM INSTRUCTION MANUAL. OGG MP3 NOTE THIS MANUAL COVERS THE INSTALLATION AND USE OF THE PLAYER HARDWARE. FOR DETAILS REGARDING THE IRM (iRiver Rights Management) SOFTWARE OPERATION INCLUDING TRANSFERRING MUSIC iRiver Rights Management is a digital music format. TO THE PLAYER, PLEASE SEE THE SOFTWARE Please visit our web site for details about this music format. INSTRUCTION MANUAL. 2-3 3

PC software installation PC software installation Software installation Software installation IMPORTANT Please complete the steps in this section BEFORE ATTACHING YOUR Note During this installation, the software will check online for the most recent PLAYER TO YOUR PC. updates. Please note that the installation screens may differ slightly from those " Insert the Installation CD into the CD-ROM drive. appearing here, as software may be of a more recent version. If your screens The following screen appears after inserting the CD. differ, please visit www.iRiver.com/software for an updated user guide. " If the installation doesn't automatically begin, execute the "setup.exe" file in the installation 1 Insert the Installation CD into the CD-ROM drive. Installation starts automatically. 2 Click “Next” after selecting the language to install. CD. The installation program will begin. PC software installation PC software installation " The installation CD contains the following contents : - Device Driver - iRiver Music Manager - MoodLogic - Manager Program for Mac The player can store MP3 files or files of any type. 3 Click 4 Select " “Next” to Install iRiver Music the folder to Install. You can upload files, other than music (MP3, WMA, OGG, ASF), to the PC using the iRiver Manager. Click “Next”. Music Manager Program. " Download latest versions of drivers and iRiver Music Manager at www.iRiver.com " Please be sure your login has Administrator privileges if using Windows 2000 or Windows XP. Note System Requirements (Windows) " Pentium 133MHz or faster " USB port " CD-ROM drive " Window 98SE / ME / 2000 / XP " 10MB free hard disk space 3-1 3-2

PC software installation Attach the player Software installation Connecting to the PC 5 Click “Next” after confirming the installation folder. 6 Click “Install” to begin the installation. 1 Connect the USB cable (provided) to the USB port of your computer. Type “A” Type “A” Type “B” PC software installation PC software installation USB cable USB port on the USB port on the PC player Type “B” marked STEREO. Lift the protective cover 3 2 Turn on the player by pressing the button “USB CONNECTED” will appear on the LCD screen of the player. 7 Installation is in progressing. Click “Finish” after the installation is completed. over the USB port and connect the USB cable to the player. Note " Connect the USB cable to the PC after playback stops to avoid errors. " iFP-780 supports USB 1.1 and iFP-790/ 795/ 799 supports USB 2.0 version. 3-3 3-4

Attach the player Attach the player Installation of New Hardware Installation of New Hardware 1 After installing iRiver Music Manager from the CD and connecting the player to your 2 The computer will automatically search to find your new hardware. 5 The installation will continue. 6 Click “Finish” Completed the installation of “New PC, "Found New Hardware" screen is hardware”. displayed. PC software installation PC software installation 3 Select “Install the software automatically (Recommended)” and click “Next”. 4 Ifmessage a "Hardware Installation" warning appears, click "Continue 7 Information screen is displayed on the PC. New hardware is installed successfully Anyway". (Windows XP) and ready to use. The iRiver software driver will not cause any damage to your computer. 3-5 3-6

Detach the player Basic Operation Safely Removing the player from the PC Contents 1 Select the “Safely Remove hardware” after clicking the “Safe To Remove 2 Click the “Stop” after selecting the device to remove. Hardware” by using the right button of mouse. 4-1 Listening to Music 4-3 PC software installation Basic Operation Basic Operation 4-7 3 Click the “OK” after confirming the hardware to remove. 4 Click the “Close” after confirming the Safely Remove Hardware message. Operating the FM Tuner (In case of Windows XP) 4-11 Recording If the player is disconnected inacculately, it may cause a malfunction or damages to the player. 3-7 4

Listening to Music Listening to Music LISTENING TO MUSIC Connect the earphones as shown below. Put the HOLD switch to “OFF”. To turn on the player Click To play the next folder h ush Pus Long P To play Click Press the PLAY/STOP button to turn on To select song To select previous song To play the previous folder the player. Press it again to play. To change modes (MP3 FM To select next song Voice recording LINE IN) h ush Pus Long P Basic Operation Basic Operation Click Long C lick To stop To fast forward Click ush Long P To advance To adjust the volume NOTE h + : To increase volume Pus - When "Hold" is ON, the buttons on the To fast reverse - : To decrease volume player will not function. ush - When stopped or in recording standby Long P mode, the player automatically turns off To reverse h according to the setting of “STOP Pus To turn off the player lick POWER OFF” on the MENU.(Refer to Long C page 4-17) 4-1 4-2

Basic Operation Basic Operation Basic Operation Changing Functions Press and hold the MODE button to display the current function. Push the NAVI/MENU button toward I or I to select the desired function, then click the NAVI/MENU button to enter that mode. lick Long C 1. LCD window : Displays the operating status of the player. 2. To skip to previous track or previous FM station. 3. To increase volume. 4. To skip forward to the next song or FM station. FM FM 5. To select NAVI/MENU function. MP3 FM RADIO VOICE LINE IN FM RADIO VOICE LINE IN 6. To decrease volume. Basic Operation Basic Operation 7. To Play or Stop playback, to select FM mode, or to turn on/ off. MP3 Playback FM Receiving Voice Recording LINE IN Recording 8. To select EQ mode, A-B repeat, or automatically store FM stations. EQ : NORMAL ROCK JAZZ CLASSIC U BASS METAL Xtrm EQ Selecting FM Tuner Mode adjusting the volume Xtrm 3D 9. To select function, playback mode, or record/stop recording. Press the STEREO button to select STEREO Press + on volume button to increase or MONO. volume and press – on Volume button Navigation Menu to decrease volume. Click to increase Click lick Long C Pus h (Refer to page 4-8) to decrease 4-3 4-4

Basic Operation Basic Operation NAVIGATION DELETING FILES ON THE PLAYER Press NAVI/MENU button and find the desired track by pushing the VOL + or VOL – button. To select the track, press the NAVI/MENU button, I or the button. 1 Stop playback. 2 Press the “NAVI/MENU” 3 Select the file to delete by using VOL or VOL . button. To move to the upper folder, push the I switch. If there is no upper folder, NAVIGATION stops. MODE During MP3 playback, you can select the playback mode by turns by clicking the 4 Click the “MODE” button. “FILE DELETE ARE YOU SURE?” is displayed on the FILE DELETE MODE/REC button. screen. Select “YES” by using I or I (VOL + or VOL -) to Click Repeat Playback delete. Then click NAVI/MENU button. Basic Operation Basic Operation Shuffle Playback Intro Playback DELETING FOLDERS ON THE PLAYER Press and hold the MODE/REC button : You can select MP3 or FM, Voice or Line-in 1 Stop playback. 2 Press “NAVI/MENU” button. 3 the Select the folder to delete. recording functions. (Play mode is automatically activated when MP3 is selected). MENU A long press of the NAVI/MENU button will enter the menu system. Scroll between menus : Push I or I (VOL + or VOL -). 4 Click the “MODE” button. “FOLDER DELETE ARE YOU SURE?” is displayed on FOLDER DELETE Exit : Click the PLAY/STOP button (or long pressing of the screen. NAVI/MENU button). Select “YES” by using I and I (VOL + or VOL -) to Select Function: Press the NAVI/MENU button. delete. Then press NAVI/MENU button. NOTE You can only delete an empty folder. 4-5 4-6

Operating the FM Tuner Operating the FM Tuner OPERATING THE FM TUNER To select STEREO/MONO 1 To switch to the FM Tuner, press and hold the MODE/REC button. The current function is displayed. Press the STEREO/PLAY/STOP button to select Stereo/Mono. lick Click Long C FM FM LINE MP3 RADIO VOICE IN The function selection graphic displays on the LCD. Auto Scan function 2 Push the I confirm. , I switch to select FM RADIO. Press the NAVI/MENU button to To automatically locate a station press and hold NAVI/MENU button to the right or left. The player will quickly scan through each frequency and stop at the next station that can tuned in. Basic Operation Basic Operation Pus h ush Click Long P or FM FM LINE MP3 RADIO VOICE IN PRESET Mode 3 Push the NAVI/MENU switch toward I or I to select your desired station. (Ex : 87.5 87.6) To select a station saved in memory, press the NAVI/MENU button to enter PRESET h mode then find a saved station by pushing the or switch to the left or the right. Pus or (Ex : 89.1 91.9 93.1) 4-7 4-8

Operating the FM Tuner Operating the FM Tuner Memory Function (Save stations) Memory delete function (Delete saved stations) 1 Select a station by pushing the or switch to the left or the right. 1 Select the station to be deleted at PRESET mode 2 Press button. and hold the MEMORY 2 Click lick Long C Push or Click and select the again desired station. Select CH02 Save complete - The next station will appear when station delete is completed. Push the MEMORY button if you also want to delete the next station. Basic Operation Basic Operation Click NOTE To cancel Saving 3 Up to 20 stations can be saved. will exit the memory FM Tuner reception may vary in different areas. function without saving. While in PRESET mode, auto scan and auto memory functions are not available. When the player doesn’t have any preset stations, EMPTY will be displayed at PRESET mode then faded out. Auto memory function To turn the player off Press and hold the A/B MEMORY button to lick Press and hold the PLAY/STOP button to turn the player off. automatically select select stations and save them Long C in sequential order. lick (Only activates while the player is not in PRESET mode) Long C Auto memory may not work within weak transmission areas. 4-9 4-10

Recording-FM Tuner Recording-Voice To record FM To pause FM recording Recording Voice Press the MODE/REC button during FM reception. The Click Press PLAY/STOP button to pause the recording process. Press PLAY/STOP button 1 Press and hold the MODE/REC button. 2 Press the or (VOL + or VOL - ) switch to select Voice mode. station will be recorded, the again to restart recording. remaining recording time will be lick displayed on the LCD screen. Long C h Pus Click FM FM FM LINE FM LINE MP3 RADIO VOICE IN MP3 RADIO VOICE IN To stop FM recording Basic Operation Basic Operation Press the MODE/REC button again to stop recording. The recorded file is saved as TUNER000.REC. It is saved in the RECORD folder. 3 Press the NAVI/MENU button (or PLAY/STOP) to go to Voice recording 4 Press the MODE/REC button again to begin recording. mode. (The recorder will be in standby mode.) Click Click Click or To play a recorded file After selecting MP3 mode, select the recorded file to listen and press the PLAY/STOP button to play. NOTE Volume can not be controlled while recording. Recorded REC files can be converted to MP3 files using iRiver Manager. (Refer to page iRiver Music Manager Software Instruction Manual 32~34/37~39) MONO 32KHz 32KBPS 4-11 4-12

Recording-Voice Recording-External audio source To stop recording To play a recorded file Recording from an external audio source Press the MODE/REC button. Press the PLAY/STOP button. 1 Connect the LINE OUT jack of the external equipment to the LINE IN jack of the player. Click Click To pause voice recording MONO 32KHz 32KBPS Press button during recording. NOTE Press button again to restart recording. After stopping a recording, starting again will create a new voice file. NOTE Basic Operation Basic Operation Pausing the recording will not create a new file, recording will be added to the current recording. 2 Set “LINE IN RECORDING MODE” in the MENU.(Refer to page 5-22 for 3 Press and hold the MODE/REC button. details) lick NOTE Long C The recorded file is saved as VOICE000.REC in the VOICE folder. LINEIN RECORDING MODE If “00:00:00” is displayed on the LCD, the player’s memory is full. To record, delete files and/or MONO STEREO folders on the player to make some space available. 44.1KHz (To delete : Refer to page 4-6, iRiver Music Manager) 128KBPS FM The player can not record when the memory is full or the battery is low. MP3 FM RADIO VOICE LINE IN Keep the player far away enough from the source to avoid distortion in the recording. NOTE Recorded REC files can be converted to MP3 files using iRiver Manager. - Select Line-In mode on the menu to use the external microphone. (Refer to page iRiver Music Manager Software Instruction Manual 4-32~4-34) 4-13 4-14

Recording-external audio source Recording-external audio source Recording from an external audio source To stop recording To play a recorded file [ 1] 4 Press the I or I (VOL + or VOL -) switch to select the LINE-IN mode. 5 Press the NAVI/MENU button (or PLAY/STOP) to go to LINE-IN 1 Press the MODE/REC button. 1 Press the PLAY/STOP button. recording mode. (Record Standby Mode) Click Click h Pus Click Click or STEREO 44.1KHz 128KBPS FM FM LINE To play a recorded file [ 2] Basic Operation Basic Operation MP3 RADIO VOICE IN STEREO 44.1KHz 128KBPS select a recorded file using the VOL + 2 1 After pressing the NAVI/MENU button, Press the PLAY/STOP button. 6 Press the MODE/REC button and LINE-IN recording is started. 7 Press play on your external equipment (if necessary) to begin or VOL - switch. playback to be recorded. Click Click Click NOTE - The recorded file is saved as AUDIO000.REC, AUDIO001.REC... in sequential order. Files are saved in the AUDIO001 RECORD folder. - Select Ext. Mic on the CONTROL line- in/ext. mic menu to use the external microphone. (Refer to page 4-23) - Files recorded using an external microphone are saved as EXMIC000.REC. 4-15 4-16


Document Created: 2004-03-20 12:00:03
Document Modified: 2004-03-20 12:00:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC