168002532 PRM-X6PRO-01 RF Exposure Rev-1

FCC ID: QAM018

RF Exposure Info

Download: PDF
FCCID_3044338

FCC TEST REPORT For ActivConnect G Series Android PC Model Number: PRM-X6PRO-01 FCC ID: QAM018 Report Number : WT168003326 Test Laboratory : Shenzhen Academy of Metrology and Quality Inspection National Digital Electronic Product Testing Center Site Location : NETC Building, No.4 Tongfa Rd., Xili, Nanshan, Shenzhen, China Tel : 0086-755-86928965 Fax : 0086-755-86009898-31396 Web : www.smq.com.cn E-mail emcrf@smq.com.cn

TEST REPORT DECLARATION Applicant :_PROMETHEAN LIMITED Address :_PROMETHEAN HOUSE, LOWER PHILIPS RD WHITEBIRK BLACKBURN,BB1 5TH UNITED KINGDOM Manufacturer :_PROMETHEAN LIMITED Address :_PROMETHEAN HOUSE, LOWER PHILIPS RD WHITEBIRK BLACKBURN,BB1 5TH UNITED KINGDOM EUT Description : ActivConnect G Series Android PC Model No :_PRM—xX6PRO—01 Trade mark : Promethean Serial Number i/ FCC ID : QAMO18 Test Standards: KDB 447498 D01 General RF Exposure Guidance v0O6 The EUT described above is tested by Shenzhen Academy of Metrology and Quality Inspection EMC Laboratory to determine the maximum emissions from the EUT. Shenzhen Academy of Metrology and Quality Inspection EMC Laboratory is assumed full responsibility for the accuracy of the test results. The test report is valid for above tested sample only and shall not be reproduced in part without written approval of the laboratory. Project 4. J Engineer: S e Chen Silin 4# #k) Checked by: 4ir Date: May.18,2016_______ (Lin Yixiang M28HM) Approved by: +4\ Date: 2016 (Lin Bin Muat) Report No.: WT168003326 Page 28

TABLE OF CONTENTS TEST REPORT DECLARATION......................................................................................................... 2 1. TEST RESULTS SUMMARY ................................................................................................... 4 2. GENERAL INFORMATION ...................................................................................................... 5 2.1. Report information .......................................................................................................... 5 2.2. Laboratory Accreditation and Relationship to Customer ......................................... 5 3. PRODUCT DESCRIPTION ...................................................................................................... 6 3.1. EUT Description ............................................................................................................. 6 4. RF EXPOSURE ....................................................................................................................... 7 4.1. LIMIT FOR MAXIMUM PERMISSIBLE EXPOSURE(MPE) .................................... 7 4.2. MPE Calculation Method .............................................................................................. 7 4.3. CALCULATED RESULT ............................................................................................... 8 Report No.: WT168003326 Page 3/8

1. TEST RESULTS SUMMARY Table 1 Test Results Summary Test Items Test Results RF Exposure Pass Remark: “N/A” means “Not applicable.” Report No.: WT168003326 Page 4/8

2. GENERAL INFORMATION 2.1. Report information 2.1.1.This report is not a certificate of quality; it only applies to the sample of the specific product/equipment given at the time of its testing. The results are not used to indicate or imply that they are application to the similar items. In addition, such results must not be used to indicate or imply that SMQ approves recommends or endorses the manufacture, supplier or use of such product/equipment, or that SMQ in any way guarantees the later performance of the product/equipment. 2.1.2.The sample/s mentioned in this report is/are supplied by Applicant, SMQ therefore assumes no responsibility for the accuracy of information on the brand name, model number, origin of manufacture or any information supplied. 2.1.3.Additional copies of the report are available to the Applicant at an additional fee. No third part can obtain a copy of this report through SMQ, unless the applicant has authorized SMQ in writing to do so. 2.2. Laboratory Accreditation and Relationship to Customer The testing report were performed by the Shenzhen Academy of Metrology and quality Inspection EMC Laboratory (Guangdong EMC compliance testing center), in their facilities located at Bldg. of Metrology & Quality Inspection, Longzhu Road, Nanshan District, Shenzhen, Guangdong, China. At the time of testing, Laboratory is accredited by the following organizations: China National Accreditation Committee for Laboratories (CNAS) accredits the Laboratory for conformance to FCC standards, EMC international standards and EN standards. The Registration Number is L0579. The Laboratory is listed in the United States of American Federal Communications Commission (FCC), and the registration number are 446246 806614 994606(semi anechoic chamber). The Laboratory is registered to perform emission tests with Industry Canada (IC), and the registration number is IC4174. TUV Rhineland accredits the Laboratory for conformance to IEC and EN standards, the registration number is E2024086Z02. Measurement Uncertainty Report No.: WT168003326 Page 5/8

3. PRODUCT DESCRIPTION 3.1. EUT Description Table 2 Specification of the Equipment under Test Product ActivConnect G Series Android PC Type: Hardware PRM-X6PRO-01 Version: Software V1.0.9 Version : FCC-ID: QAM018 Frequency: Wifi:2412MHz-2462MHz; U-NII 1(5150~5250MHz); U-NII 3(5725~5850MHz) Bluetooth: 2402MHz-2480MHz Type(s) of DSSS (DBPSK, DQPSK, CCK) for 802.11b Modulation: OFDM (BPSK, QPSK, 16QAM, 64QAM) for 802.11a/g/n OFDM (BPSK, QPSK, 16QAM, 64QAM，256QAM) for 802.11ac Bluetooth ：GFSK, pi/4-DQPSK, 8DPSK Antenna PIFA Antenna 2dBi Type: Operating 120V AC Adapter; voltage: 4.8V (Low)/5.0V (Nominal)/ 5.3V (Max) Remark: / Report No.: WT168003326 Page 6/8

4. RF EXPOSURE 4.1.LIMIT FOR MAXIMUM PERMISSIBLE EXPOSURE(MPE) 4.1. This product can be classified as mobile devics, so the 20om separation cistance warning is required. in this section, the power density at 20om location is calculated to examine it t is lower than the limit 4.1.1. Limits for Occupational / Controlled Exposure Frequency Range Electrie Fild Magnetie Fild. Power Density (8)| Averaging Tme *(2RnS, /9 qurty Strongth (E) (Vim)|Strongth (#) (A/m)] (mWrem) tmnuen os30 o1 163 1007 s 3030 teeeit «s07t C s soa00 s1« o.183 10 s a00—1500 rraco s 1800—100.000 s s 1.2. Limits for General Population / Uncontrolled Exposure Frequeney Range ElectrieField Magnetic Field [Power Density (8)) Averaging Time PTERNS 79 quite Strength (€) (Vim)[Strongth (4)(A/m)| (rmifem) {minutes) os134 ore 183 (roo so 13430 soar 210 (rsom> s 20300 ars oors o2 so 300—1500 ernsoo so 1800—100,000 10 3 F = frequency in NHz Plane—wave equivalent power density ‘Planewave equivalent power density 4.2.MPE Calculation Methad Power Density: Pd(Mwom‘)=P°G /4 x at P=Peak RF output power (mW) G=EUT Antenna numeric gain (numeric) d=Separation distance etween raciator and human bedy (m) Repen No wrieasosses Pase 72

4.3. CALCULATED RESULT BT P=-2.00dBm(max:0.00063W) G=2dBi (numeric:1.59) d=200mm Pd=0.00063*1.59/4*3.14*0.04=0.002<1 BLE P=5.88dBm (max:0.0038W) G=2dBi (numeric:1.59) d=200mm Pd=0.0038*1.59/4*3.14*0.04=0.012<1 WLAN 2.4G P=15.49dBm (max:0.0354W) G=2dBi (numeric:1.59) d=200mm Pd=0.0354*1.59/4*3.14*0.04=0.112<1 WLAN 5G P=14.32dBm (max:0.027W) G=2dBi (numeric:1.59) d=200mm Pd=0.027*1.59/4*3.14*0.04=0.086<1 Report No.: WT168003326 Page 8/8


Document Created: 2016-06-20 14:40:45
Document Modified: 2016-06-20 14:40:45
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC