User manual

FCC ID: Q9SAWR391V3

Users Manual

Download: PDF
FCCID_2467198

Owner‘s Manuat UHF 450—470 MHz Two—Way Radio ARE YOU WIRELESS YET?® 20809 Kensington Blvd. Lakeville, MN 55044 1—800—475—5852. www.advancedwireless.com

Frequency: UHF 450-470 MHz AWR391V3 Surwave Charger Model Number: SSA021F060080USD

2.5 cm between the back of the radio and the user’s body. AWC-approved accessories, antennas, Using non AWC approved accessories may result in exposure levels which exceed the FCC’s for use with this radio. Use of non-FCC approved headsets, batteries and accessories may


IC Statement: This device complies with IndustryCanada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'IndustrieCanada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

INTRODUCTION Advanced Wireless Communications is a leader in the design and integration of wireless communications solutions. Since 1992, we’ve been creating on site wireless systems that help businesses communicate effectively. Whether it’s a national chain of retail stores, a 50-story office tower, construction site, a large distribution center, a college campus or a retirement home, Advanced Wireless has the expertise and experience to create the best solution possible... We’re ready to partner with you to make your communications more effective and efficient. Ken & Ben Coons Founders of Advanced Wireless Communications GETTING ACQUAINTED PRODUCT INSPECTION Thank you for your purchase of Advanced Wireless Communications Portable two-way radio model: Mini 391 V3. Before use, please inspect the product as follows. First check the shipping carton for any signs of damage if any damage has occurred, please contact your dealer immediately. Confirm the supplied product against the packing slip to assure accuracy. PACKAGING CONTENTS: Part number Item Qty. 1. S139145702 AWR391V3 1pc 2. BA0L080040 Li-ion Battery pack for Mini 391 1 pc 3. 4503003911 Holster for Mini 391 1pc 1 2 3 Headset 1pc, Model: AWR391HS 1

TRANSCEIVER RADIO VIEW 0 6 7 1 8 2 9 3 10 11 4 5 Front View: 0. Antenna Receives and transmits signals 1. LED indicator Lights up red when transmitting a signal 2. Channel Up Press and hold for more than 2.0 seconds to activate the auto scan or dual watch (selected by PC program) for available channel. While radio is on, press button to increase channel no. 3. Channel Down Press and hold for more than 2.0 seconds to activate the key lock.While radio is on, press button to decrease channel no. 4. Speaker Generates audible sound 5. Connection pins Slot pins into a desktop charger docking pins station (docking station not included) 6. Microphone Picks up voice sounds 2

7. Headset jack Allows use of headset for hands-free communication. 8. Push to talk Press and hold PTT button, speak into the microphone using your normal speaking voice. 9. Volume Up Press and hold more than 1.5 seconds to rapidly increase the volume. While radio is on, press button to increase the volume by a single unit. 10. Volume Down Press and hold for more than 1.5 seconds to rapidly decrease the volume. While radio is on, press button to decrease the volume by a single unit. 11. Power Press and hold for more than 1.5 seconds to turn the unit on or off. Back View: 1. Battery door Remove to access battery compartment 2. Battery compartment Uses lithium 3.7 V - 830 mAh rechargeable battery 3. Mon button Activate MONITOR function 3

LCD DISPLAY SYMBOLS  SYMBOL FUNCTION  (big) Channel number: Select between 16 channels  Battery indicator: Provides battery status during operation  Dual Watch: Scan 2 channels High Power˖the current channel is high power  Keypad lock: Locks keypad to prevent accidental button activation  Auto-scan: Unit is scanning Channels or CTCSS PTT tone: the Call tone is activated VOX: Voice activation system  (small) Auxiliary function 6-GANG CHARGER VIEW 1 2 3 4 5 6 1. Docking cradle 2. DC adaptor socket: Charge radio units; provide power for cloning operation 3. LED status indicator for extra batteries 4

4. USB socket:dounload settings rom PC to radio unis (No use for ANC3I1 V3) 5. CHG—CLON swich: Charge radio units; clone radio un‘ setings(No use for AWC3#1 V3). 6. PROG: Clone radlo unt setings rom source racio to other raciounis "Tislire um forAWcsorva EMGEnAnpcns sn bus IONS SAFETY PRECAUTIONS Please observe thefolowing safety precautions when settng up and using this product * LCD pane! — The LCD panelis made ofglass, and may break ifthe unitis dropped or impacted. * Heat sources — Keep the product away from heat sources such as radiators, stoves, heaters, and other heat—generating products. * Water and moisture — Do not use the productin or near wateror in such as a bathroom. Indoor use only. CARING FOR THIS PRODUCT To ensure you recaive the mas um beneftfom using this product, pease observe the following guidelines. * Gleaning — Use a damp coth. Do not use iquid cleaning agents, benzene, himer,or acrasols. * Repair— Do not attempt to repair the product or madfy the circuity by yoursel. Only replacement parts that are recommended by Advanced Wireless Communications at 1—800—478—5052 are to be used * Do not scratch hard objects against the LCD display as this may cause damage. CAUTION * To avoidrisk ofre or njurg do not altempt to charge non—rechargeable batteries. Please turn of the unit while charging. * Replace only batteries with the same or equivalent type recommended by the manutacturer * Please dispose of ld, defective batteriesin an environmentall friendly manner in accordance wih the relevantlegislation * See additional battery warnings in the "WARNINGsection of tuser manual * Do not dispose this product as unsorted municipal waste. Gollecion of such waste separately for specialtreatmentis nacessary * No open flames, such as ighted candles, should be placed nearthe apparatus. * To reduce the risk af lectric shock, do not expose this application o rain or moisture.

GETTING STARTED INSTALLING / REMOVING / CHARGING THE BATTERY To insert the battery: 1. Slide the battery door open. 2. Insert the lithium battery into the battery compartment, making sure the polarities (+ and –) match. 3. Slide the back cover and clip into place. WARNING: There is a danger in which incorrectly placing the battery can cause an explosion. Always make sure the radio is switched off before installing or changing the battery. Replace only with the same or equipment type. Use ONLY with lithium 3.7V 830mAH rechargeable battery. Contact Advanced Wireless Communications at 1-800-475-5852 or www.adavncedwireless.com for more information. To charge the battery using 6 gang charger: IMPORTANT: Charge the battery for 12 hours on the first charge. After that, it should take 4 or less hours to charge. Make sure the adapter is not obstructed and is easily accessible to the unit. 1) Connect 6 gang charger to AC power using DC adaptor provided. 2) Slide CHG-CLON switch to select CHG. 3) Insert radio unit into 1st docking cradle (insert additional radio units into docking cradles, 2 through 6). Please ensure radio screen faces forward (same direction as LED lights on gang charger). Battery Status Extra Batteries LED Radio screen Battery charging Red LCD backlight on Battery charged Green LCD backlight off 6

NOTE: To completely disconnect from power, the adapter should be disconnected from the 6-Ganged Charger. Batteries should not be exposed to excessive heat such as sunshine or fire. The 6-Ganged Charger and adapter should not be exposed to wet conditions. No objects filled with liquid, such as vases, should be placed on the main unit and adapter. To maintain the battery life of your two-way transceiver it is recommended that you only charge the battery when needed. Overcharging the battery will reduce performance. For best results ensure that the unit is turned off before charging. Remove batteries before storing your radio for extended periods. Batteries corrode over time and may cause permanent damage to your radio. TURN THE UNIT ON / OFF To turn the unit ON or OFF: Press and hold until you hear a beep and the LCD display appears or disappears. VOLUME To change the volume level: Use or to increase or decrease volume. TALK TO ANOTHER TRANSCEIVER For best transmission speak about 2 away from the radio and leave a short pause before speaking once you have pressed To talk to another transceiver: 1. Press and hold “Mon” to check if the channel is free. 2. Press and hold and speak into the microphone to transmit. 3. Release once you have finished speaking to allow other radios to respond. The transceiver will automatically play received transmissions. NOTE: You can only communicate with another transceiver that is on the same channel and using the same CTCSS/DCS code as your transceiver. 7

KEYPAD LOGK To avoid accidentaly changing the channal and the units preferred settings, you can lock the keypad To lock or unlack the keypad: Press and hotd tor 2.0 secons. fil appears when the keypac is tocked NOTE: While the keypais on you can stlluse the SELECT A CHANNEL "The transmiter and receiver must be on the same channel using the same CTCSS code or DGS code in order for you to communicate with another party To select between maximum Bchannels (the CTCSS code or DCS code is set by PC program): 1. Press @ to increase channelno. To actvate auto scan for available channels, press and hnld@ for more than 2. seconds 2. Press!—I to decrease channel no. To activate key lock, press and hoid @ for more than 2.0 seconds Mernercmite eaberis The Voice Activated Transmission (VOX) function allows your voice to activate transmission automatically when the transceiver is used with an optional hands—Iree microphone / headset. 1 the unit is set to VOX lavel 1, 2 9. it wil automatically detect and transmit your voicethrough to the selected channel. The VOX level and transmission delay time should be adjusted according to your veice loudness and personal preference. To set up a headset: 1.. Press and holid@ to switch tradio ot. 2.. Plugin theadset. 3.. Press and hots © to swich the radioback on again. NOTE: This preduct is only compatile wih AWC headsels, please ask your local retailrfofurther information Prosmity oT huder dectoeVoX

TROUBLESHOOTING See below for some common problems and their remedies. DO NOT attempt any repairs yourself. This will invalidate your warranty. PROBLEM POSSIBLE CAUSES / REMEDIES ● Check the battery is correctly installed and has been Can’t turn the radio on fully charged ● For this and all other issues contact Advanced Wireless Can’t communicate with Communications at 1-800-475-5852 or other radios www.advancedwireless.com for more information ● Check the headset is correctly plugged in and is VOX function is not working compatible with the Mini 391 radio 9


Document Created: 2014-12-03 19:07:31
Document Modified: 2014-12-03 19:07:31
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC