calibration datat I

FCC ID: Q9SAWR-D6500

RF Exposure Info

Download: PDF
FCCID_4321774

® A = 7 H i i Attestation of Global Compliance Page 1 of 25 CALIBRATION DATA PROBE CALIBRATION DATA Calibration Laboratory of Cns Pn Schweizerischer Kalibrierdienst E Schmid & Partner i {" Service suisse d‘étalonnage Engineering AG zl 0! Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland L/ng Arded se Navg Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates Client AGC (Auden) Certificate No: EX3—3953_Jun18 CALIBRATION CERTIFICATE | Object EX3DV4 — SN:3953 Calibration procedure(s) QA CAL—01.v9, QA CAL—12.v9, QA CAL—23.v5, QA CAL—25.v6 Calibration procedure for dosimetric E—field probes Calibration date: June 26, 2018 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID Cal Date (Certificate No.) Scheduled Calibration Power meter NRP SN: 104778 04—Apr—18 (No. 217—02672/02673) Apr—19 Power sensor NRP—291 SN: 103244 04—Apr—18 (No. 217—02672) Apr—19 Power sensor NRP—291 SN: 103245 04—Apr—18 (No. 217—02673) Apr—19 Reference 20 dB Attenuator SN: S5277 (20%) 04—Apr—18 (No. 217—02682) Apr—19 Reference Probe ES3DV2 SN: 3013 30—Dec—17 (No. ES3—3013_Dec17) Dec—18 DAE4 SN: 660 21—Dec—17 (No. DAE4—660_Dec17) Dec—18 Secondary Standards ID Check Date (in house) Scheduled Check Power meter E44198 SN: GB41293874 06—Apr—16 (in house check Jun—18) In house check: Jun—20 Power sensor E4412A SN: MY41498087 06—Apr—16 (in house check Jun—18) In house check: Jun—20 Power sensor E4412A SN: 000110210 06—Apr—16 (in house check Jun—18) In house check: Jun—20 RF g HP 8648C SN: US3642U01700 04—Aug—99 (in house check Jun—18) In house check: Jun—20 Network Analyzer HP 8753E SN: US37390585 18—Oct—01 (in house check Oct—17) In house check: Oct—18 Name Function Signature Calibrated by: Jeton Kastrati Laboratory Technician W % Approved by: Katja Pokovic Technical Manager /m_ Issued: June 26, 2018 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: EX3—3953_Jun18 Page 1 of 11 The results ,'wErori o thisfes gst report refer only to the sample(s) tested unless otherwise stated and the sample(s) are retained for 30 days only. The document is issued by/A (§E this docu’f&é t cannot be reproduced except in full with our prior written permission. The more details and the authenticity of the report will be confirmed tfittp://www.agc% t.com. 0 z e) % A 0 Attestatiqi¢of GlobalEgimpliance Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@ago—cert.com @ 400 089 2118 Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China

A\GC Attestat::ofGIgtSal ifipha?}g n en e e en _ Calibration Laboratory of aNl/z G Schweizerischer Kalibrierdienst Schmid & Partner M C Service suisse d‘étalonnage Engineering AG oe s Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland 2"/,?:\}. w Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid NORMx,y,z sensitivity in free space ConvF sensitivity in TSL / NORMx.y,z DCP diode compression point CF crest factor (1/duty_cycle) of the RF signal A, B, C, D modulation dependent linearization parameters Polarization q p rotation around probe axis Polarization 8 8 rotation around an axis that is in the plane normal to probe axis (at measurement center), i.e., 8 = 0 is normal to probe axis Connector Angle information used in DASY system to align probe sensor X to the robot coordinate system Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial—Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) 1EC 62209—1, ", "Measurement procedure for the assessment of Specific Absorption Rate (SAR) from hand— held and body—mounted devices used next to the ear (frequency range of 300 MHz to 6 GHz)", July 2016 c) IEC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Methods Applied and Interpretation of Parameters: * NORMx,y,z: Assessed for E—field polarization 3 = 0 (f < 900 MHz in TEM—cell; f > 1800 MHz: R22 wavegu:de) NORMx,y,z are only intermediate values, i.e., the uncertainties of NORMx,y,z does not affect the E*—field uncertainty inside TSL (see below ConvF). * NORM(A)x,y,z = NORMx,y,z * frequency_response (see Frequency Response Chart). This linearization is implemented in DASY4 software versions later than 4.2. The uncertainty of the frequency response is included in the stated uncertainty of ConvF. * DCPx,y,z: DCP are numericallinearization parameters assessed based on the data of power sweep with CW signal (no uncertainty required). DCP does not depend on frequency nor media. *« PAR: PAR is the Peak to Average Ratio that is not calibrated but determined based on the signal characteristics * Axy,z; Bx,y,z; Cx,y,2; Dx,y,2z; VRx,y,z: A, B, C, D are numerical linearization parameters assessed based on the data of power sweep for specific modulation signal. The parameters do not depend on frequency nor media. VR is the maximum calibration range expressed in RMS voltage across the diode. * ConvF and Boundary Effect Parameters: Assessed in flat phantom using E—field (or Temperature Transfer Standard for f < 800 MHz) and inside waveguide using analytical field distributions based on power measurements for f > 800 MHz. The same setups are used for assessment of the parameters applied for boundary compensation (alpha, depth) of which typical uncertainty values are given. These parameters are used in DASY4 software to improve probe accuracy close to the boundary. The sensitivity in TSL corresponds to NORMx,y,z * ConvF whereby the uncertainty corresponds to that given for ConvF. A frequency dependent ConvF is used in DASY version 4.4 and higher which allows extending the validity from + 50 MHz to £ 100 MHz. * Spherical isotropy (3D deviation from isotropy): in a field of low gradients realized using a flat phantom exposed by a patch antenna. * Sensor Offset: The sensor offset corresponds to the offset of virtual measurement center from the probe tip (on probe axis). No tolerance required. * Connector Angle: The angle is assessed using the information gained by determining the NORMx (no uncertainty required). Certificate No: EX3—3953_Jun18 Page 2 of 11 Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@age—cert.com ©@ 400 089 2118 Add: 2/F. , Building 2, No.1—4,Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bavan District, Shenzhen, Guangdong China

® A\G & T I % i! Attestation of Global Compliance uo EX3DV4 — SN:3953 June 26, 2018 Probe EX3DV4 SN:3953 Manufactured: August 6, 2013 Repaired: June 5, 2018 Calibrated: June 26, 2018 Calibrated for DASY/EASY Systems (Note: non—compatible with DASY2 system!) Certificate No: EX3—3953_Jun18 Page 3 of 11 The results s‘ i nial this}es est report refer only to the sample(s) tested unless otherwise stated and the sample(s) are retained for 30 days only. The document is issued by/A E. this doctifrsh tfittp://www.agc-% o Attestatic m/gf Global Co pliance Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@agc—cert.com @ 400 089 2118 B# Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China

® A\G & T I % I! Attestation of Global Compliance o EX3DV4— SN:3953 June 26, 2018 DASY/EASY — Parameters of Probe: EX3DV4 — SN:3953 Basic Calibration Parameters Sensor X Sensor Y Sensor Z Une (k=2) Norm (uV/(V/imY*)* 0.51 0.53 0.47 #10.1 % DCP {mV)" 97.9 97.5 98.0 Modulation Calibration Parameters A B C dB dBv 0.0 0.0 1.0 0.0 0.0 1.0 0.0 0.0 1.0 The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. ; The uncertainties of Norm X.YZ do not affect the E’-fie_ld uncertainty inside TSL (see Pages 5 and 6). Ny p ter: . ity not req © Uncertainty is determined using the max. deviation from linear response applying rectangular distribution and is expressed for the square of the field value. Certificate No: EX3—3953_Jun18 Page 4 of 11 Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@agc—cert.com @ 400 089 2118 Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park, Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China

® A\G & T I % i! Attestation of Global Compliance uo EX3DV4— SN:3953 June 26, 2018 DASY/EASY — Parameters of Probe: EX3DV4 — SN:3953 Calibration Parameter Determined in Head Tissue Simulating Media Relative Conductivity Depth * Unc f(MHz)* _Permittivity" (S/m)" ConvFX ConvFY ConvFZ Aipha® _({mm} (k22) 150 52.3 0.76 13.23 13.23 13.23 0.00 1.00 +13.3 % 450 43.5 0.87 11.28 11.28 11.28 0.16 1.30 +13.3 % ° Frequency validity above 300 MHz of + 100 MHz only applies for DASY v4.4 and higher (see Page 2), else it is restricted to + 50 MHz. The uncertainty is the RSS of the ConvF uncertainty at calibration frequency and the uncertainty for the indicated frequency band. Frequency validity below 300 MHz is + 10, 25, 40, 50 and 70 MHz for ConvF assessments at 30, 64, 128, 150 and 220 MHz respectively. Above 5 GHz frequency validity can be extended to £ 110 MHz. " At frequencies below 3 GHz, the validity of tissue parameters (s and &} can be relaxed to + 10% if liquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz, the validity of tissue parameters {s and 0) restricted to + 5%. The uncertainty the RSS of the ConvF uncertainty for indicated target tissue parameters. © Alpha/Depth are determined during calibration. SPEAG warrants that the remaining deviation due to the boundary effect after compensation is always less than + 1% for frequencies below 3 GHz and below + 2% for frequencies between 3—6 GHz at any distance larger than half the probe tip diameter from the boundary. Certificate No: EX3—3953_Jun18 Page 5 of 11 The results s‘ & virl fii@sfi" kreport refer only to the sample(s) tested unless otherwise stated and the sample(s) are retained for 30 days only. The document is issued byAKGE, h this docufash . 9 s AGC > confirmed tfittp://www.agc-«& Attestatiq ,2fGIoba!Q o pliance Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@agc—cert.com @ 400 089 2118 Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China

® A\G & T I % i! Attestation of Global Compliance uo EX3DV4— SN:3953 June 26, 2018 DASY/EASY — Parameters of Probe: EX3DV4 — SN:3953 Calibration Parameter Determined in Body Tissue Simulating Media Relative Conductivity Depth * Une f(MHz)® Permittivity" (S/im)" ConvF X ConvF Y¥ ConvFZ Aipha®| {mm) (ke2) 150 61.9 0.80 12.96 12.96 12.96 0.00 1.00 13.3 % 450 56.7 0.94 11.51 11.51 11.51 0.09 1.30 £13.3 % © Frequency validity above 300 MHz of + 100 MHz only applies for DASY v4.4 and higher (see Page 2), else it is restricted to + 50 MHz. The uncertainty is the RSS of the ConvF uncertainty at calibration frequency and the uncertainty for the indicated frequency band. Frequency validity below 300 MHz is + 10, 25, 40, 50 and 70 MHz for ConvF assessments at 30, 64. 128, 150 and 220 MHz respectively. Above 5 GHz frequency validity can be extended to + 110 MHz. " At frequencies below 3 GHz, the validity of tissue parameters (s and a} can be relaxed to + 10% if liquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz, the validity of tissue parameters (e and a) is restricted to £ 5%. The uncertainty is the RSS of the ConyF uncertainty for indicated target tissue parameters. © Alpha/Depth are determined during calibration. SPEAG warrants that the remaining deviation due to the boundary effect after compensation is always less than + 1% for frequencies below 3 GHz and below + 2% for frequencies between 3—6 GHz at any distance larger than half the probe tip diameter from the boundary. Certificate No: EX3—3953_Jun18 Page 6 of 11 The results s‘ & virl fii@sfi" kreport refer only to the sample(s) tested unless otherwise stated and the sample(s) are retained for 30 days only. The document is issued by h C§€ this docu’@o ~ confirmed tfittp://www.agc-«& s+ AGC &9 9 Attestatiqitof Global Co pliance Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@agc—cert.com @ 400 089 2118 CC 5 Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China

® rmkes 4 Attestation of Global Compliance uo EX3DV4— SN:3953 June 26, 2018 Frequency Response of E—Field (TEM—Cell:ifi110 EXX, Waveguide: R22) TTTT 4 & —ecccccccennncnmmnnnnnsd m Frequency response (normalized) TTTT: ; 0 8 on S 8 0 8 Io S 8 Uncertainty of Frequency Response of E—field: £ 6.3% (k=2) S Certificate No: EX3—3953_Jun18 Page 7 of 11 The results s‘ & virl fii@sfi‘ kreport refer only to the sample(s) tested unless otherwise stated and the sample(s) are retained for 30 days only. The document is issued byAKGE, h this docufash tfittp://www.agc?% o Attestatic /2f Global Co pliance Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@age—cert.com @ 400 089 2118 B# Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China

® rmkes 4 Attestation of Global Compliance uo EX3DV4— SN:3953 June 26, 2018 Receiving Pattern (¢), 8 = 0° £=600 MHz,TEM f=1800 MHz,R22 99 J + o« 0s o P * A*' "o 0s :3 P * ® o & 6 * e * e & Tot X Y 2 Tot xX y a & & 5 & j ~150 t —100 5 —50 0 50 ' 100 Roll ["] e * ¢ 10%%141 600 MHz 13WHz zso'oTM]Hz Uncertainty of Axial Isotropy Assessment: £ 0.5%(k=2) Certificate No: EX3—3953_Jun18 Page 8 of 11 The results ’v.eErori o thisfes est report refer only to the sample(s) tested unless otherwise stated and the sample(s) are retained for 30 days only. The document is issued byKGE, h this docu’@) ; t;fittp://www.agc-«d?S o Attestatic m/gf Global Co pliance Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@agc—cert.com @ 400 089 2118 B# Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China

® A\G & T I & m Attestation of Global Compliance uo EX3DV4— SN:3953 June 26, 2018 Dynamic Range f(SARneaq) (TEM cell , fevai= 1900 MHz) 105 & 10¢ 2 o & 9 & E 3 10+ ! 10° 10‘ 10 102 10‘ 10 10‘ 10 103 SAR [mW/cm3] * _& not compensated compensated a 4. & € w 103 102 101 10° 101 102 103 SAR [mW/cm3] L*] not compensated compensated Uncertainty of Linearity Assessment: £ 0.6% (k=2) Certificate No: EX3—3953_Jun18 Page 9 of 11 The results shGuwmi| ,m, w thisfes get report refer only to the sample(s) tested unless otherwise stated and the sample(s) are retained for 30 days only. The document is issued by XGE . this doctifas 3 tfittp://www.agc% Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@age—cert.com @ 400 089 2118 Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China

® A\G & T I & m Attestation of Global Compliance uo EX3DV4— SN:3953 June 26, 2018 Conversion Factor Assessment f= 150 MHz.WGLS Flat Phantom 4.4 f= 450 MHz,WGLS Flat Phantom 4.4 85 so. s a as{ A . 4 10 A — * & s x P x ,5; so X 5 & $ as $ * * & 20 ba * % " * ‘\ 5 & *% *. 6 '.“"‘ ‘,.‘.‘ 05 ‘-““*‘.4_ 00| 0 i o 8 o s zo as s s «o 0 5 o z0 25 so 35 40 2 {mm] 2 {mm] #] _ *J aratoal measured anatrical measated Deviation from Isotropy in Liquid Error (§, 9), f = 900 MHz Deviation —1.0 —0.8 —0.6 —0.4 —0.2 00 02 04 0.6 08 1.0 Uncertainty of Spherical Isotropy Assessment: + 2.6% (k=2) Certificate No: EX3—3953_Jun18 Page 10 of 11 The results ,r,eSticor| w thisfes ost report refer only to the sample(s) tested unless otherwise stated and the sample(s) are retained for 30 days only. The document is issued by h (§E this docu’f&o tfittp://www.agc% o AttestatiOn o pliance Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@agc—cert.com @ 400 089 2118 & Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China

Page 11 of 22

Page 12 of 22 DAE CALIBRATION DATA

® A\G & T I & m Attestation of Global Compliance uo m® \n Collaboration with x ["[‘L a im CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2512 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Hitp:/www.chinattl.cn Glossary: DAE data acquisition electronics Connector angle information used in DASY system to align probe sensor X to the robot coordinate system. Methods Applied and Interpretation of Parameters: e DC Voltage Measurement: Calibration Factor assessed for use in DASY system by comparison with a calibrated instrument traceable to national standards. The figure given corresponds to the full scale range of the voltmeter in the respective range. e Connector angle: The angle of the connector is assessed measuring the 5 angle mechanically by a tool inserted. Uncertainty is not required. e The report provide only calibration results for DAE, it does not contain other performance test results. Certificate No: Z19—60040 Page 2 of 3 The results ,'wSron| o fhtefeat& report refer only to the sample(s) tested unless otherwise stated and the sample(s) are retained for 30 days only. The document is issued by/KGE, this doctifas t cannot be reproduced except in full with our prior written permission. The more details and the authenticity of the report will be . 9 confirmed tfittp://www.agc% t.com. o% A 0 o AttestatiQ fGIoba\!Q o liance Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@age—cert.com @ 400 089 2118 p Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China

Page 14 of 22

Page 15 of 22 DIPOLE CALIBRATION DATA


Document Created: 2019-06-18 14:34:11
Document Modified: 2019-06-18 14:34:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC