Calibration Data II

FCC ID: Q9SAWR-D6000

RF Exposure Info

Download: PDF
FCCID_4316599

® &+1£m rmkes & Attestation of Global Compliance Page 16 of 22 SAR Reference Dipole Calibration Report Ref : ACR.69.2.17.SATU.A ATTESTATION OF GLOBAL COMPLIANCE CO. LTD. 1&2F, NO.2 BUILDING, HUAFENG NO.1 INDUSTRIAL PARK, GUSHU COMMUNITY XIXIANG STREET BAOAN DISTRICT, SHENZHEN, P.R. CHINA MVG COMOSAR REFERENCE DIPOLE FREQUENCY: 450 MHZ SERIAL NO.: SN 46/11 DIP 0G450—184 Calibrated at MVG US 2105 Barrett Park Dr. — Kennesaw, GA 30144 \‘\\n|n/,,‘ cewc, W g" § iC Ns “\‘-\_./ u: yranS 97 A (Acerepireb /'ll,.|.|\l‘\ Calitrationcent stres0? Calibration Date: 03/10/2017 Summary: This document presents the method and results from an accredited SAR reference dipole calibration performed in MVG USA using the COMOSAR test bench. All calibration results are traceable to national metrology institutions. The results ’mSori o thisfeat8 report refer only to the sample(s) tested unless otherwise stated and the sample(s) are retained for 30 days only. The document is issued by/A E. this doctifrsh t cannot be reproduced except in full with our prior written permission. The more details and the authenticity of the report will be . 9 : AGC > confirmed tfittp://www.agc-«& t.com. 9 Attestatiq ,2fGIoba!Q o pliance Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@agc—cert.com @ 400 089 2118 Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China

® A\G & T I & m Attestation of Global Compliance uo SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.69.2.17.SATU.A Name Function Date Signature Prepared by : Jérome LUC Product Manager 3/10/2017 )/é/ Checked by : Jérome LUC Product Manager 3/10/2017 fi/ Approved by : Kim RUTKOWSKI Quality Manager 3/10/2017 Jum Patthowh! Customer Name ATTESTATION mnthscmsmes : OF GLOBAL Distribution : COMPLIANCE CO. LTD. Issue Date Modifications A 3/10/2017 Initial release Page: 2/11 This document shall not be reproduced, except in full or in part, without the written approval ofMVG. The information contained herein is to be used onlyfor the purpose for which it is submitted and is not to be released in whole orpart without written approval ofMVG. The results ’v.eEtisori o thisfes ost report refer only to the sample(s) tested unless otherwise stated and the sample(s) are retained for 30 days only. The document is issued by h GE . this docu’f&o ~ tfittp://www.agc-«& o Attestatic m/gf Global Co pliance Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@agc—cert.com @ 400 089 2118 B# Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China

® A\G & T I & m Attestation of Global Compliance uo SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.69.2.17.SATU.A TABLE OF CONTENTS 1 IMEFOGUCHOM........... .000 000eee en en eenr en en reeren e en rre n renrer en rerrere en e rern e e en re en ere n nenerrnees 4 2 De@ViG@ UNU@P T@St ............00000l00s se eeeeeeevve en neererervv e reeerev e en eee e en eeereve en reereen e e en 4 3 PFOGUCt D@SCFIDHOM ..........cc.se lssn en eee e renereerernvrr e rererrr e reeren e en renrere en n en rern e e en 4 3.1 General Information 4 4 Measurement MeUOU —————mmmescersmmmnneemmmnemneermcermmmneeccmmmnnnmneerremneccormmneemanieacaen 5 4.1 Return Loss Requirements 5 4.2 Mechanical Requirements 5 5 MeASUF@MeNt UNC@TYANEY............. lsccsm $1 Return Loss 5 $2 Dimension Measurement § 3.3 Validation Measurement 3 6 CalibratioON MEASUTEMENt R@SUIS ............022.00e0e esns eee e m renrr en renrenn en rern e e e ies 6 6.1 Return Loss and Impedance In Head Liquid 6 6.2 Return Loss and Impedance In Body Liquid 6 6.3 Mechanical Dimensions 6 7 ValidatHon MIE@SUTEMONE —mmmmcmmemmmemmmmmnmmnmmemmmemmmmmmmncerecomenemmosmmenammenerenncens 7 7.1 Head Liquid Measurement 4 7.2 SAR Measurement Result With Head Liquid 7.3 Body Liquid Measurement 9 7.4 SAR Measurement Result With Body Liquid 10 8 TISEOF EQHIPMGENE :mms orrmmmmemmmmmmmmmmmmmemcmmmmmmmenmencememmmemmmmncanes 11 Page: 3/11 This document shall not be reproduced, except in full or in part, without the written approval ofMVG. The information contained herein is to be used onlyfor the purpose for which it is submitted and is not to be released in whole orpart without written approval ofMVG. The results ’v.eEtisori o thisfestreport refer only to the sample(s) tested unless otherwise stated and the sample(s) are retained for 30 days only. The document $s ; 07. is issued byKGE, h this docu/mo h tfittp://www.agc-«& o Attestatic m/gf Global Co pliance Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@agc—cert.com @ 400 089 2118 B# Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China

® AOGC £.z.54.8.»9 Attestation of Global Compliance uo SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.69.2.17.SATU.A 1 INTRODUCTION This document contains a summary of the requirements set forth by the IEEE 1528, FCC KDBs and CEI/IEC 62209 standards for reference dipoles used for SAR measurement system validations and the measurements that were performed to verify that the product complies with the fore mentioned standards. 2 DEVICE UNDER TEST Device Under Test Device Type COMOSAR 450 MHz REFERENCE DIPOLE Manufacturer MVG Model $1D450 Serial Number SN 46/11 DIP 0G450—184 Product Condition (new / used) Used A yearly calibration interval is recommended. 3 PRODUCT DESCRIPTION $.1 GENERAL INFORMATION MVG‘s COMOSAR Validation Dipoles are built in accordance to the IEEE 1528, FCC KDBs and CEI/IEC 62209 standards. The product is designed for use with the COMOSAR test bench only. Figure 1 —MVG COMOSAR Validation Dipole Page: 4/11 This document shall not be reproduced, except in full or in part, without the written approval ofMVG. The information contained herein is to be used onlyfor the purpose for which it is submitted and is not to be released in whole orpart without written approval ofMVG. The results s 6tial O m%} streport refer only to the sample(s) tested unless otherwise stated and the sample(s) are retained for 30 days only. The document is issued by , this docf&9 it cannot be reproduced except in full with our prior written permission. The more details and the authenticity of the report will be confirmed tfittp://www.agc-«dr5 t.com. .9 ‘a > Attestatic i »mpliance Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@age—cert.com @ 400 089 2118 Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China

® A\G & T I & m Attestation of Global Compliance uo mvG SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.69.2.17.SATU.A 4 MEASUREMENT METHOD The IEEE 1528, FCC KDBs and CEIIEC 62209 standards provide requirements for reference dipoles used for system validation measurements. The following measurements were performed to verify that the product complies with the fore mentioned standards. 4.1 RETURN LOSS REQUIREMENTS The dipole used for SAR system validation measurements and checks must have a return loss of —20 dB or better. The return loss measurement shall be performed against a liquid filled flat phantom, with the phantom constucted as outlined in the fore mentioned standards. 4.2 MECHANICAL REQUIREMENTS The IEEE Std. 1528 and CEI/IEC 62209 standards specify the mechanical components and dimensions of the validation dipoles, with the dimensions frequency and phantom shell thickness dependent. The COMOSAR test bench employs a 2 mm phantom shell thickness therefore the dipoles sold for use with the COMOSAR test bench comply with the requirements set forth for a 2 mm phantom shell thickness. § MEASUREMENT UNCERTAINTY All uncertainties listed below represent an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2, traceable to the Internationally Accepted Guides to Measurement Uncertainty. 5.1 RETURN LOSS The following uncertainties apply to the return loss measurement: Frequency band Expanded Uncertainty on Return Loss 400—6000MHz 0.1 dB 5.2 DIMENSION MEASUREMENT The following uncertainties apply to the dimension measurements: Length (mm) Expanded Uncertainty on Length 3 — 300 0.05 mm 5.3 VALIDATION MEASUREMENT The guidelines outlined in the IEEE 1528, FCC KDBs, CENELEC EN50361 and CEUIEC 62209 standards were followed to generate the measurement uncertainty for validation measurements. Scan Volume Expanded Uncertainty 1g 20.3 % Page: 5/11 This document shall not be reproduced, except in full or in part, without the written approval ofMVG. The information contained herein is to be used onlyfor the purpose for which it is submitted and is not to be released in whole orpart without written approval ofMVG. The results s 6tial & fii@fio treport refer only to the sample(s) tested unless otherwise stated and the sample(s) are retained for 30 days only. The document is issued b , this docu’f& it cannot be reproduced except in full with our prior written permission. The more details and the authenticity of the report will be s AGC > confirmed tfittp://www.agc-«& t.com. Attestatic /2f Globa!Q ompliance Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@age—cert.com @ 400 089 2118 Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China

AG °s — x m Attestation of Global Compliance SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.69.2.17.SATU.A 10 g 20.1 % 6 CALIBRATION MEASUREMENT RESULTS 6.1 RETURN LOSS AND IMPEDANCE IN HEAD LIQUID Frequency, MHz 350 360 380 520 540 550 ral_ Frequency (MHz) Return Loss (dB) Requirement (dB) Impedance 450 —22.34 —20 46.6 t — 6.6 jQ 6.2 RETURN LOSS AND IMPEDANCE IN BODY LIQUID Frequency, MHz 250 a6o 280 400 420 440 460 500 520. 540 550 30.0— Frequency (MHz) Return Loss (dB) Requirement (dB) Impedance 450 —26.76 —20 46.6 t — 2.7 jQ 6.3 MECHANICAL DIMENSIONS Frequency MHz L mm h mm d mm required measured required measured required measured 300 420.0 1 %. 250.0 +1 %. 6.35 £1 %. Page: 6/11 This document shall not be reproduced, except in full or in part, without the written approval ofMVG. The information contained herein is to be used onlyfor the purpose for which it is submitted and is not to be released in whole orpart without written approval ofMVG. The results ’m, @@ori & fia@fi ost report refer only to the sample(s) tested unless otherwise stated and the sample(s) are retained for 30 days only. The document is issued by/A (§€ this doctifroh tfittp://www.agc-«& o Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@age—cert.com @ 400 089 2118 Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China

® rmkes 4 Attestation of Global Compliance uo SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.69.2.17.SATU.A 450 290.0 +1 %. PASS 166.7 +1 %. PASS 6.35 £1 %. PASS 750 176.0 1 %. 100.0 £1 %. 6.35 £1 %. 835 161.0 +1 %. 89.8 £1 %. 3.6 £1 %. 900 149.0 £1 %. 83.3 £1 %. 3.6 £1 %. 1450 89.1 +1 %. 51.7 #1 % 3.6 £1 %. 1500 80.5 £1 %. 50.0 #1 %. 3.6 £1 %. 1640 79.0 #1 %. 45.7 +1 %. 3.6 +1 %. 1750 75.2 +1 %. 42.9 #1 %. 3.6 £1 %. 1800 72.0 £1 %. 41.7 #1 % 3.6 £1 %. 1900 68.0 +1 %. 39.5 #1 %. 3.6 +1 %. 1950 66.3 £1 %. 38.5 #1 %. 3.6 £1 %. 2000 64.5 £1 %. 37.5 #1 %. 3.6 £1 %. 2100 61.0 +1 %. 35.7 #1 % 3.6 £1 %. 2300 55.5 #1 %. 32.6 £1 %. 3.6 £1 %. 2450 51.5 #1 %. 30.4 #1 %. 3.6 £1 %. 2600 48.5 £1 %. 28.8 +1 %. 3.6 £1 %. 3000 41.5 £1 %. 25.0 £1 %. 3.6 £1 %. 3500 37.0+1 %. 26.4 #1 %. 3.6 +1 %. 3700 34.741 %. 26.4 £1 %. 3.6 +1 %. 7 VALIDATION MEASUREMENT The IEEE Std. 1528, FCC KDBs and CEIV/IEC 62209 standards state that the system validation measurements must be performed using a reference dipole meeting the fore mentioned return loss and mechanical dimension requirements. The validation measurement must be performed against a liquid filled flat phantom, with the phantom constructed as outlined in the fore mentioned standards. Per the standards, the dipole shall be positioned below the bottom of the phantom, with the dipole length centered and parallel to the longest dimension of the flat phantom, with the top surface of the dipole at the described distance from the bottom surface of the phantom. 7.1 HEAD LIQUID MEASUREMENT Fre’?,l‘:inw Relative permittivity (€,") Conductivity {0) S/m required measured required measured 300 45.3 £5 % 0.87 +5 % 450 43.5 £5 % PASS 0.87 25 % PASS 750 41.9 £5 % 0.89 45 % 835 41.5 £5 % 0.90 45 % 900 41.5 £5 % 0.97 45 % 1450 40.5 £5 % 1.20 £5 % 1500 40.4 £5 % 1.23 £5 % 1640 40.2 £5 % 1.31 45 % 1750 40.1 £5 % 1.37 £5 % Page: 7/11 This document shall not be reproduced, except in full or in part, without the written approval ofMVG. The information contained herein is to be used onlyfor the purpose for which it is submitted and is not to be released in whole orpart without written approval ofMVG. The results ’v.eErori o thisfes 8 kreport refer only to the sample(s) tested unless otherwise stated and the sample(s) are retained for 30 days only. The document is issued byAKGE, h this docufash . 3 confirmed tfittp://www.agc-«& # % A AG e) 0 Attestatiq ,2fGIoba!Q o pliance Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@agc—cert.com @ 400 089 2118 Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China

AG °s 7 1 6 A Attestation of Global Compliance uo SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.69.2.17.SATU.A 1800 40.0 £5 % 1.40 £5 % 1900 40.0 £5 % 1.40 £5 % 1950 40.0 £5 % 1.40 £5 % 2000 40.0 £5 % 1.40 £5 % 2100 39.8 15 % 1.49 £5 % 2300 39.5 45 % 1.67 £5 % 2450 39.2 45 % 1.80 £5 % 2600 39.0 15 % 1.96 £5 % 3000 38.5 15 % 2.40 25 % 3500 37.945.% 2.91 25 % 7.2 SAR MEASUREMENT RESULT WITH HEAD LIQUID The IEEE Std. 1528 and CEI/IEC 62209 standards state that the system validation measurements should produce the SAR values shown below (for phantom thickness of 2 mm), within the uncertainty for the system validation. All SAR values are normalized to 1 W forward power. In bracket, the measured SAR is given with the used input power. Software OPENSAR V4 Phantom SN 20/09 SAMT71 Probe SN 18/11 EPG122 Liquid Head Liquid Values: eps® : 42.2 sigma : 0.86 Distance between dipole center and liquid 15.0 mm Area scan resolution dx=8mm/dy=8mm Zoon Scan Resolution dx=8mm/dy=8mm/dz=5mm Frequency 450 MHz Input power 20 dBm Liquid Temperature 2A °C Lab Temperature 2 °C Lab Humidity 45 % F'e;‘,l‘:*z““ 1 g SAR (W/kg/w) 10 g SAR (W/kg/w) required measured required measured 300 2.85 1.94 450 4.58 4.74 (0.47) 3.06 3.12 (0.31) 750 849 5.55 835 9.56 6.22 900 10.9 6.99 1450 29 16 1500 30.5 16.8 1640 34.2 18.4 1750 36.4 19.3 1800 38.4 20.1 Page: 8/11 This document shall not be reproduced, except in full or in part, without the written approval ofMVG. The information contained herein is to be used onlyfor the purpose for which it is submitted and is not to be released in whole orpart without written approval ofMVG. The results s‘ & virl fii@sfi‘ kreport refer only to the sample(s) tested unless otherwise stated and the sample(s) are retained for 30 days only. The document is issued byAKGE, h this docufash tfittp://www.agc?% o Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@age—cert.com @ 400 089 2118 Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China

® A\G & T I % i! Attestation of Global Compliance uo SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.69.2.17.SATU.A 1900 39.7 20.5 1950 40.5 20.9 2000 41.1 211 2100 43.6 21.9 2300 48.7 23.3 2450 52.4 24 2600 55.3 24.6 3000 63.8 25.7 3500 67.1 25 3700 67.4 24.2 Sutses: vssses niemy e SAR (Wikgl Z {mn) 7.3 BODY LIQUID MEASUREMENT Fre:AuHezncv Relative permittivity (s,") Conductivity {0) S/m required measured required measured 150 61.9 15 % 0.80 15 % 300 58.2 £5 % 0.92 £5 % 450 56.7 £5 % PASS 0.94 £5 % PASS 750 55.5 15 % 0.96 £5 % 835 55.245% 0.97 45 % 900 55.0 £5 % 1.05 45 % 915 55.0 £5 % 1.06 45 % 1450 54.0 £5 % 1.30 45 % 1610 53.8 £5 % 1.40 £5 % 1800 55.3 45.% 1.52 45 % 1900 53.3 £5 % 115245 % 2000 53.3 15 % 1.52 45 % 2100 53.2 £5 % 1.62 45 % Page: 9/11 This document shall not be reproduced, except in full or in part, without the written approval ofMVG. The information contained herein is to be used onlyfor the purpose for which it is submitted andis not to be released in whole orpart without written approval ofMVG. The results ’m @@ori & fi%@)} treport refer only to the sample(s) tested unless otherwise stated and the sample(s) are retained for 30 days only. The document $s ; 07. is issued byAKGE, this docufash tfittp://www.agc-«& o Attestatic m/gf Global Co pliance Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@agc—cert.com @ 400 089 2118 B# Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China

AG °s 7 1 & m Attestation of Global Compliance SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.69.2.17.SATU.A 2300 52.9.%5 % 1.81 45 % 2450 52.7 £5% 1.95 45 % 2600 52.5 45 % 2.16 £5 % 3000 52.0 15 % 2.73 45 % 3500 51.3 45 % 3.31 15 % 3700 51.0 +5 % 3.55 45 % 5200 49.0 £10 % 5.30 £10 % 5300 48.9 £10 % 5.42 £10 % 5400 48.7 £10 % 5.53 £10 % 5500 48.6 £10 % 5.65 £10 % 5600 48.5 £10 % 5.77 £10 % 5800 48.2 £10 % 6.00 £10 % 74 SAR MEASUREMENT RESULT WITH BODY LIQUID Software OPENSAR V4 Phantom SN 20/09 SAM71 Probe SN 18/11 EPG122 Liquid Body Liquid Values: eps‘ : 57.6 sigma : 0.95 Distance between dipole center and liquid 15.0 mm Area scan resolution dx=8mm/dy=8mm Zoon Scan Resolution dx=8mm/dy=8mm/dz=5mm Frequency 450 MHz Input power 20 dBm Liquid Temperature 21 °C Lab Temperature 2l 8 Lab Humidity 45 % F'e&":z"cv 1 g SAR (W/kg/w) 10 g SAR (W/kg/w) measured measured 450 4.78 (0.48) 3.19 (0.32) = =s oi Suber: feivnoy Toen P e ,; angs \ hn 9 7 Nss C > 55 | 152 2outnal 3 se &1 Fran w 5 [&x] l to d ns Ximm o Yien 2 {mn) Page: 10/11 This document shall not be reproduced, except in full or in part, without the written approval ofMVG. The information contained herein is to be used onlyfor the purpose for which it is submitted andis not to be released in whole orpart without written approval ofMVG. The results shfuwmi| ho( thisfes est report refer only to the sample(s) tested unless otherwise stated and the sample(s) are retained for 30 days only. The document XGE . this doctifrsh 9 tfittp://www.agc-«& s AAGC 9 o Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@age—cert.com @ 400 089 2118 Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China

C AG # 7 H t ol Attestation of Global Compliance ols SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.69.2.17.SATU.A 8 LIST OF EQUIPMENT Equipment Summary Sheet Equipment Manufacturer / Identification No Current Next Calibration Description Model *| Calibration Date Date SAM Phantom mvoe shgomsgapy, NValcalsd: required. Nowal Welicated required. No wal COMOSAR Test Bench| Version 3 NA veldaled. required. Nogel WVoldaied required. ho cal Network Analyzer Rhode8Sohwarz sm10o132 022016 0222019 Calipers Carrera CALIPER—01 01/2017 01/2020 Reference Probe MVG EPG122 SN 18/11 10/2016 10/2017 Multimeter Keithley 2000 1188656 01/2017 01/2020 Signal Generator Agilent E4438C MY49070581 01/2017 01/2020 a Characterized prior to |\Characterized prior to Amelificr Aethersomis SN 94# test. No cal required. |test. No cal required. Power Meter HP E4418A US38261498 01/2017 01/2020 Power Sensor HP ECP—E26A US37181460 01/2017 01/2020 Directional Coupler Narda 4216—20 01386 Characterized pripr to |Characterized pripr to test. No cal required. |test. No cal required. Temperature @nd Humidity Sensor Gontrol Company 150798832 10/2015 10/2017 Page: 11/11 This document shall not be reproduced, except in full or in part, without the written approval ofMVG. The information contained herein is to be used onlyfor the purpose for which it is submitted andis not to be released in whole orpart without written approval ofMVG. The results s y Ffifi%@afi treport refer only to the sample(s) tested unless otherwise stated and the sample(s) are retained for 30 days only. The document is issued by h GE . this doc@) ; s AGC > confirmed tfittp://www.agc-«& Attestatiq ,ngIoba!Q o Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@age—cert.com @ 400 089 2118 Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China


Document Created: 2019-06-13 12:17:38
Document Modified: 2019-06-13 12:17:38
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC