report_MPE

FCC ID: Q9DMST200

RF Exposure Info

Download: PDF
FCCID_3015867

FCC ID: Q9DMST200 Statement of compliance to Maximum Permissible Exposure (FCC MPE) Applicant : Aruba Networks, Inc 1344 Crossman Ave. Sunnyvale, CA,94089 Manufacturer : Aruba Networks, Inc 1344 Crossman Ave. Sunnyvale, CA,94089 Equipment : Outdoor Wireless Mesh Access Router Type/Model : MST2H13N1-XX(where – XX can be any alphanumeric or blank), MST2H13N0-XX(where –XX can be any alphanumeric or blank) According to §2.1091, §2.1093 and §1.1307(b), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. The S = PG / (4πR²) Where S = power density in mW/cm² P = transmit power in mW G = numeric gain of transmit antenna R = distance (cm) The calculations in the table below use the highest gain of antenna for the EUT. These calculations represent worst case in terms of the exposure levels. Freq band Power Antenna Gain Beam-forming R S Limits MHz dBm dBi dBi cm mW/cm2 mW/cm2 5725-5850 22.73 13.00 / 20 0.74 1 Date of issue: May 13, 2016 Prepared by: Reviewed by: Wakeyou Wang (Project Engineer) Daniel Zhao (Reviewer) Page 1 of 2

FCC ID: Q9DMST200 Appendix I Definition below must be outlined in the User Manual: To satisfy FCC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. Page 2 of 2


Document Created: 2016-06-03 16:34:59
Document Modified: 2016-06-03 16:34:59
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC