MPE Test report

FCC ID: Q9DASIN0301

RF Exposure Info

Download: PDF
FCCID_4476336

MPE/RF EXPOSURE TEST REPORT FCC CFR 47 Part 1.1310 REPORT No:. HPEN141-U12_MPE Rev A Company: Hewlett Packard Enterprise Model No:. ASIN0301

MPE/RF EXPOSURE TEST REPORT Company: Hewlett Packard Enterprise Model: ASIN0301 To: FCC CFR 47 Part 1.1310 Test Report Serial No.: HPEN141-U12_MPE Rev A This report supersedes: NONE Applicant: Hewlett Packard Enterprise 3333 Scott Blvd. Santa Clara, California 95054 USA Issue Date: 3rd September 2019 This Test Report is Issued Under the Authority of: MiCOM Labs, Inc. 575 Boulder Court Pleasanton California 94566 USA Phone: +1 (925) 462-0304 Fax: +1 (925) 462-0306 www.micomlabs.com MiCOM Labs is an ISO 17025 Accredited Testing Laboratory

Title: Hewlett Packard Enterprise, Aruba User Experience Insight To: FCC CFR 47 Part 1.1310 Serial #: HPEN141-U12_MPE Rev A 1. MAXIMUM PERMISSABLE EXPOSURE Calculations for Maximum Permissible Exposure Levels Power Density = Pd (mW/cm2) = EIRP/(4*π*d2) EIRP = P * G P = Peak output power (mW) G = Antenna numeric gain (numeric) d = Separation distance (cm) Numeric Gain = 10 ^ (G (dBi)/10) The calculations in the table below use the highest conducted power values together with the lowest antenna gain specified for the EUT. These calculations represent worst case in terms of the exposure levels. Calculated Calculated Min Peak Peak Power Power Ant Numeric Power Calculated Output Output Density Density Freq. Band (MHz) Gain Gain Density safe Power Power Limit (mW/cm2) (dBi) (numeric) (mW/cm2) distance for (dBm) (mW) (mW/cm2) @ Safe @ 20cm Limit (cm) Distance 5150.0 - 5250.0 4.90 3.09 20.55 134.00 0.08 1.00 5.7 1.00 5470.0 - 5725.0 4.90 3.09 21.19 131.77 0.08 1.00 5.7 1.00 5725.0 - 5850.0 4.90 3.09 21.18 131.26 0.08 1.00 5.8 1.00 5250.0 - 5350.0 4.90 3.09 20.72 118.03 0.07 1.00 4.8 1.00 2400.0 - 2483.5 (Wi-Fi) 2.00 1.58 21.41 138.21 0.04 1.00 4.2 1.00 2400.0 - 2483.5 (BLE) 1.80 1.51 3.06 2.00 0.001 1.00 0.5 1.00 Assessment for simultaneous operation: Only the BLE and highest Power Density used for simultaneous operation. Peak Peak Power Ant Numeric Output Output Density Limit Power Density Freq. Band (MHz) Gain Gain Ei/Eref Power Power (mW/cm2) (mW/cm2) (dBi) (numeric) (dBm) (mW) Eref 2400.0 - 2483.5 (BLE) 1.80 1.51 3.06 2.00 1.00 0.001 0.001 5470.0 - 5725.0 4.90 3.09 21.19 131.50 1.00 0.08 0.08 Summation of Ratio: 0.081 The Total Evaluation was calculated using the formula: Where Ei: calculated E-field Strength for transmitter Eref: E-field strength related limit Note: for mobile or fixed location transmitters the minimum separation distance is 20cm, even if calculations indicate the MPE distance to be less. Specification - Maximum Permissible Exposure Limits The Limit is defined in Table 1 of FCC §1.1310. Issue Date: 3rd September 2019 Page: 3 of 4 This test report may be reproduced in full only. The document may only be updated by MiCOM Labs personnel. All changes will be noted in the Document History section of the report. MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566 USA, Phone: +1 (925) 462 0304, Fax: +1 (925) 462 0306, www.micomlabs.com

575 Boulder Court Pleasanton, California 94566, USA Tel: +1 (925) 462 0304 Fax: +1 (925) 462 0306 www.micomlabs.com


Document Created: 2019-10-12 02:51:15
Document Modified: 2019-10-12 02:51:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC