User Manual

FCC ID: Q9DARBT0201

Users Manual

Download: PDF
FCCID_3434192

Aruba AT-BT10 Asset Tracker Installation Guide About the AT-BT10 Figure 3 Attaching the Adhesive Pads residential installation. This equipment generates, uses and can radiate China RoHS radio frequency energy and, if not installed and used in accordance with the The Aruba AT-BT10 Asset Tracker location beacon is a Bluetooth low energy manufacturer’s instructions, may cause interference harmful to radio Aruba products also comply with China environmental (BLE) device capable of providing real-time asset location tracking using Meridian Mobile Engagement tools. communications. 10 declaration requirements and are labeled with the “EFUP 10” If this equipment does cause interference, which can be determined by label shown at the left. Features of the AT-BT10 include: turning the equipment off and on, the user is encouraged to try to correct ᳝↦᳝ᆇ⠽䋼ໄᯢ Highly-accurate asset location identification the interference by one or more of the following measures: Hazardous Materials Declaration Low power consumption Reorient or relocate the receiving antenna. 䚼ӊৡ⿄ ᳝↦᳝ᆇ⠽䋼៪‫ܗ‬㋴(Hazardous Substance) 䪙 ∲ 䬝 ݁Ӌ䫀 ໮⒈㘨㣃 ໮⒈Ѡ㣃䝮 (Parts) Easy to deploy, test, and use Increase the separation between the equipment and receiver. 3E +J &G &U 3%% 3%'( ⬉䏃ᵓ h ƻ ƻ ƻ ƻ ƻ Connect the equipment to an outlet on a circuit different from that to (PCA Boards) ᴎẄ㒘ӊ Figure 1 AT-BT10 Front view which the receiver is connected. (Mechanical Sub-Assemblies) h ƻ ƻ ƻ ƻ ƻ  Consult the dealer or an experienced radio or TV technician for help. ƻ˖ 㸼⼎䆹᳝↦᳝ᆇ⠽䋼೼䆹䚼ӊ᠔᳝ഛ䋼ᴤ᭭Ёⱘ৿䞣ഛ೼ SJ/T11363-2006 ᷛ‫ޚ‬㾘ᅮⱘ䰤䞣㽕∖ҹϟDŽ Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is below the relevant threshold of the SJ/T11363-2006 standard.  Canada h˖ 㸼⼎䆹᳝↦᳝ᆇ⠽䋼㟇ᇥ೼䆹䚼ӊⱘᶤϔഛ䋼ᴤ᭭Ёⱘ৿䞣䍙ߎ6-7ᷛ‫ޚ‬㾘ᅮⱘ䰤䞣㽕∖DŽ Indicates that the concentration of the hazardous substance of at least one of all homogeneous materials in the parts is above the relevant threshold of the SJ/T11363-2006 standard. Under Industry Canada regulations, this radio transmitter may only operate 2. Peel off the remaining paper from the pads to attach the device onto a  using an antenna of a type and maximum (or lesser) gain approved for the ᇍ䫔ଂП᮹ⱘ᠔ଂѻકᴀ㸼ᰒ⼎կᑨ䫒ⱘ⬉ᄤֵᙃѻકৃ㛑ࣙ৿䖭ѯ⠽䋼DŽ flat surface. This table shows where these substances may be found in the supply chain of electronic information transmitter by Industry Canada. To reduce potential radio interference to products, as of the date of sale of the enclosed product. other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that ℸᷛᖫЎ䩜ᇍ᠔⍝ঞѻકⱘ⦃ֱՓ⫼ᳳᷛᖫᶤѯ䳊䚼ӊӮ᳝ϔϾϡৠⱘ⦃ֱՓ⫼ᳳ Configuring/Provisioning AT-BT10 Devices necessary for successful communication. ՟བ⬉∴ऩ‫ܗ‬῵ഫ 䌈೼݊ѻકϞ ℸ⦃ֱՓ⫼ᳳ䰤া䗖⫼Ѣѻકᰃ೼ѻક᠟‫ݠ‬Ё᠔㾘ᅮⱘᴵӊϟᎹ԰ The Environment- Friendly Use Period (EFUP) for all enclosed products and their parts are The AT-BT10 devices are configured/provisioned using the Aruba Beacons per the symbol shown here. The Environment- Friendly Use Period is valid only when the This device complies with Industry Canada license-exempt RSS standard(s). product is operated under the conditions defined in the product manual. app. For more informations, see Operation is subject to the following two conditions: http://docs.meridianapps.com/developers/beacons_app This device may not cause interference 本產品符合低功率電波輻射性電機管理辦法： This device must accept any interference, including interference that 第十二條 Product Specifications may cause undesired operation of the device. 經形式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自 變更頻率、加大功率或變更原設計之特性及功能。 Complies with the Class B limits for radio noise emissions as set out in the 第十四條 Physical interference-causing equipment standard entitled “Digital Apparatus,” ICES- 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象 Package Contents Device dimensions 003 of Industry Canada. 時， 應立即停用，並改善至無干擾時方的繼續使用。 AT-BT10 location beacon Diameter: 34mm Cet apareil numerique de la classe B respecte toutes les exigencies du 前項合法通信，指依電信規定作業之無線電信。低功率射頻電機須忍受合法通信 Adhesive pads Height: 11mm Reglement sur le materiel brouilleur du Canada. 或工業、科學及醫療用電波輻射性電機設備之干擾。 Installation Guide (this document, printed) Changes or modifications to this unit that are not expressly Electrical approved by the party responsible for compliance could void the Power Supply: One CR2032 coin battery user’s authority to operate this equipment. Activation Coin battery capacity: 225 mAh To activate the AT-BT10, insert a coin or flathead screwdriver into the indention located at the center of the rear panel and turn counterclockwise Voltage: 3 V EU Regulatory Conformance until the indicator arrow is aligned with the “I” marking. This product is CE marked according to the provisions of the R & RF Performance Figure 2 Activating the AT-BT10 TTE Directive (1999/5/EC) - CE. Aruba Networks Inc., hereby Tx = -23 dBm to 0dBm (23 dB dynamic range) declares that the ARBT0100 device model is in compliance with the essential Rx sensitivity = Approximately -90 dBm (1 Mbps) requirements and other relevant provisions of Directive 1999/5/EC -CE Working Frequency range: 2402-2480MHz The Declaration of Conformity made under Directive 1999/5/EC is available Operation temperature: 0 °C to 50 °C for viewing at the following location: http://support.arubanetworks.com RF Radiation Exposure Statement: This equipment complies with European Union RoHS FCC RF radiation exposure limits. This equipment should be Aruba products also comply with the EU Restriction of installed and operated with a minimum distance of 7.9 inches (20 Hazardous Substances Directive 2011/65/EC (RoHS). EU cm) between the radiator and your body for 2.4 GHz operation. N O T E This transmitter must not be co-located or operating in conjunction RoHS restricts the use of specific hazardous materials in with any other antenna or transmitter. the manufacture of electrical and electronic equipment. Specifically, restricted materials under the RoHS Directive are Lead (including Solder used in printed circuit assemblies), Cadmium, Mercury, Hexavalent Chromium, and Bromine. Some Aruba products are subject to the Safety and Regulatory Compliance exemptions listed in RoHS Directive Annex 7 (Lead in solder used in printed circuit assemblies). Products and packaging will be marked with the “RoHS” To deactivate the AT-BT10, rotate the back cover clockwise until the Refer to the following sections for safety and regulatory information for the label shown at the left indicating conformance to this Directive. indicator arrow is aligned with the “0” marking. AT-BT10. Regulatory Model Names Proper Disposal of Aruba Equipment Installation The regulatory model name for the AT-BT10 is ARBT0201. Use the adhesive pads to install the device on a flat surface in an indoor Waste of Electrical and Electronic Equipment For complete regulatory model information, refer to the label located on environment. Aruba products at end of life are subject to separate the back panel of this device. collection and treatment in the EU Member States, Norway, Before installing the device, ensure that: and Switzerland and therefore are marked with the symbol the mounting surface is indoor, flat, clean, and dust-free. RFCC Class B Part 15 shown at the left (crossed-out wheelie bin). The treatment It is recommended to clean the surface using a solvent with a 50/50 This device complies with Part 15 of the Federal Communications applied at end of life of these products in these countries Isopropyl Alcohol and water mixture. Commission (FCC) Rules. Operation is subject to the following two shall comply with the applicable national laws of countries the grooves for adhesive pads on the bottom of the device is dust-free. conditions: implementing Directive 2002/96EC on Waste of Electrical and Electronic Equipment (WEEE). the device is activated. This device may not cause harmful interference. This device must accept any interference received, including interference Installation that may cause undesired operation. 1. Remove the paper from one side of the adhesive pads to attach them to This equipment has been tested and found to comply with the limits for a the three corresponding grooves on the bottom of the device, as shown Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are in Figure 3. designed to provide reasonable protection against harmful interference in a

Aruba AT-BT10 Asset Tracker Installation Guide a Hewlett Packard Enterprise company Contacting Support Main Site arubanetworks.com Support Site support.arubanetworks.com Airheads Social Forums and Knowledge Base community.arubanetworks.com North American Telephone 1-800-943-4526 (Toll Free) 1-408-754-1200 International Telephones http://www.arubanetworks.com/ support-services/support- program/contact-support Software Licensing Site licensing.arubanetworks.com End of Support information http://www.arubanetworks.com/ support-services/end-of-life- products/end-of-life-policy/ Security Incident Response Team (SIRT) http://www.arubanetworks.com/ support-services/security- bulletins/ Support Email Addresses Americas, APAC, and EMEA support@arubanetworks.com Security Incident Response Team (SIRT) sirt@arubanetworks.com Copyright © Copyright 2016 Hewlett Packard Enterprise Development LP Open Source Code Certain Aruba products include Open Source software code developed by third parties, including software code subject to the GNU General Public License ("GPL"), GNU Lesser General Public License ("LGPL"), or other Open Source Licenses. The Open Source code used can be found at this site: http://www.arubanetworks.com/open_source Warranty This hardware product is protected by an Aruba warranty. For details, see the Safety, Compliance, and Warranty Information Guide included with this device. a Hewlett Packard Enterprise company www.arubanetworks.com 1344 Crossman Avenue Sunnyvale, California 94089 Phone: 408.227.4500 Fax 408.227.4550 Aruba AT-BT10 Asset Tracker | Installation Guide Part Number 0511955-02 | December 2016


Document Created: 2060-11-15 00:00:00
Document Modified: 2060-11-15 00:00:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC