1703TW0106-U3-FCC-Co-location Test Report

FCC ID: Q9DAPINH203

Test Report

Download: PDF
FCCID_3367950

MRT Technology (Taiwan) Co., Ltd Report No.: 1703TW0106-U3 Phone: +886-3-3288388 Report Version: V01 Fax: +886-3-3288918 Issue Date: 03-23-2017 Web: www.mrt-cert.com Co-location Report FCC ID: Q9DAPINH203 APPLICANT: Hewlett Packard Enterprise Company Application Type: Certification Product: ACCESS POINT Model No.: APINH203 Brand Name: , FCC Classification: Digital Transmission System (DTS) Unlicensed National Information Infrastructure (UNII) Test Date: December 28, 2016 ~ March 08, 2017 Reviewed By : ( Paddy Chen ) Approved By : ( Chenz Ker ) The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.4-2013. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Taiwan) Co., Ltd. FCC ID: Q9DAPINH203 Page Number: 1 of 4

Report No.: 1703TW0106-U3 Revision History Report No. Version Description Issue Date Note 1703TW0106-U3 Rev. 01 Initial report 03-23-2017 Valid FCC ID: Q9DAPINH203 Page Number: 2 of 4

Report No.: 1703TW0106-U3 1. TEST RESULT of Radiated Emissions for Co-located Test Mode: 2.4GHz + 5GHz Transmit Test Site: AC1 Test Engineer: Kevin Polarity: Horizontal Remark: There is the ambient noise within frequency range 9kHz~30MHz and 18GHz~40GHz, the permissible value is not show in the report. No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV/m) (dB) (dBuV/m) (dBuV) 1 3380.000 34.274 36.031 -39.726 74.000 -1.757 PK 2 3380.000 23.843 25.600 -30.157 54.000 -1.757 AV 3 4629.500 36.254 34.161 -37.746 74.000 2.093 PK 4 4629.500 24.483 22.390 -29.517 54.000 2.093 AV 5 5505.000 38.134 34.613 -35.866 74.000 3.521 PK 6 * 5505.000 27.041 23.520 -26.959 54.000 3.521 AV Note 1: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB). Note 2: We selected the 2.4GHz and 5GHz worst-case mode of radiated spurious emissions in the DTS and UNII reports. FCC ID: Q9DAPINH203 Page Number: 3 of 4

Report No.: 1703TW0106-U3 Test Mode: 2.4GHz + 5GHz Transmit Test Site: AC1 Test Engineer: Kevin Polarity: Vertical Remark: There is the ambient noise within frequency range 9kHz~30MHz and 18GHz~40GHz, the permissible value is not show in the report. No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV/m) (dB) (dBuV/m) (dBuV) 1 * 3737.000 34.599 35.045 -39.401 74.000 -0.446 PK 2 3737.000 23.744 24.190 -30.256 54.000 -0.446 AV 3 4689.000 35.350 33.059 -38.650 74.000 2.291 PK 4 4689.000 26.921 24.630 -27.079 54.000 2.291 AV 5 6652.500 40.308 34.315 -33.692 74.000 5.993 PK 6 6652.500 29.413 23.420 -24.587 54.000 5.993 AV Note 1: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB). Note 2: We selected the 2.4GHz and 5GHz worst-case mode of radiated spurious emissions in the DTS and UNII reports. The End FCC ID: Q9DAPINH203 Page Number: 4 of 4


Document Created: 2017-04-05 21:41:45
Document Modified: 2017-04-05 21:41:45
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC