Test Report_20190106_v1 - 1807TW0111-U11-FCC Co-location Test Report

FCC ID: Q9DAPIN0514515

Test Report

Download: PDF
FCCID_4148513

MRT Technology (Taiwan) Co., Ltd Report No.: 1807TW0111-U11 Phone: +886-3-3288388 Report Version: V01 Web: www.mrt-cert.com Issue Date: 01-05-2018 Co-location Report FCC ID: Q9DAPIN0514515 APPLICANT: Hewlett Packard Enterprise Company Application Type: Certification Product: ACCESS POINT Model No.: APIN0514, APIN0515 Brand Name: , FCC Rule Part(s): Part15 Subpart C (Section 15.247) Part15 Subpart E (Section 15.407) Test Date: June 19 ~ September 25, 2018 Reviewed By: ( Paddy Chen ) Approved By: ( Chenz Ker ) The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.4-2013. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Taiwan) Co., Ltd. FCC ID: Q9DAPIN0514515 Page Number: 1 of 12

Report No.: 1807TW0111-U11 Revision History Report No. Version Description Issue Date Note 1807TW0111-U11 Rev. 01 Initial report 01-05-2019 Valid FCC ID: Q9DAPIN0514515 Page Number: 2 of 12

Report No.: 1807TW0111-U11 1. TEST RESULT of Radiated Emissions for Co-located Test Mode: 2.4GHz, 5GHz Wi-Fi + BLE Transmit Test Site: AC1 Test Engineer: Kevin Polarity: Horizontal Antenna Type: Omni Antenna (M/N: AP-ANT-20W) Model No.: APIN0514 Remark: There is the ambient noise within frequency range 9kHz~30MHz and 18GHz~40GHz, the permissible value is not show in the report. No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV/m) (dB) (dBuV/m) (dBuV) 1 6040.500 44.736 38.528 -29.264 74.000 6.209 PK 2 6040.500 31.238 25.030 -22.762 54.000 6.209 AV 3 7995.500 49.641 37.140 -24.359 74.000 12.501 PK 4 7995.500 37.761 25.260 -16.239 54.000 12.501 AV 5 10188.500 51.691 35.530 -22.309 74.000 16.161 PK 6 * 10188.500 39.791 23.630 -14.209 54.000 16.161 AV Note 1: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB). Note 2: We selected the 2.4GHz and 5GHz worst-case mode of radiated spurious emissions in the DTS and UNII reports. Note 3: 2.4GHz Wi-Fi 802.11b Channel 2412MHz Power setting = 76; 5GHz Wi-Fi 802.11ax-HE80 Channel 5690MHz Power setting = 72; 2.4GHz Bluetooth LE channel 2402MHz Power setting = 8; Note 4: ZigBee and Bluetooth-LE can’t transmit simultaneously and Bluetooth-LE power higher than ZigBee, so we only assess the WIFI and Bluetooth-LE simultaneous transmission. FCC ID: Q9DAPIN0514515 Page Number: 3 of 12

Report No.: 1807TW0111-U11 Test Mode: 2.4GHz, 5GHz Wi-Fi + BLE Transmit Test Site: AC1 Test Engineer: Kevin Polarity: Vertical Antenna Type: Omni Antenna (M/N: AP-ANT-20W) Model No.: APIN0514 Remark: There is the ambient noise within frequency range 9kHz~30MHz and 18GHz~40GHz, the permissible value is not show in the report. No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV/m) (dB) (dBuV/m) (dBuV) 1 6984.000 47.928 37.483 -26.072 74.000 10.445 PK 2 6984.000 35.185 24.740 -18.815 54.000 10.445 AV 3 7944.500 49.497 37.043 -24.503 74.000 12.454 PK 4 7944.500 38.334 25.880 -15.666 54.000 12.454 AV 5 10205.500 51.861 35.620 -22.139 74.000 16.242 PK 6 * 10205.500 40.661 24.420 -13.339 54.000 16.242 AV Note 1: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB). Note 2: We selected the 2.4GHz and 5GHz worst-case mode of radiated spurious emissions in the DTS and UNII reports. Note 3: 2.4GHz Wi-Fi 802.11b Channel 2412MHz Power setting = 76; 5GHz Wi-Fi 802.11ax-HE80 Channel 5690MHz Power setting = 72; 2.4GHz Bluetooth LE channel 2402MHz Power setting = 8; Note 4: ZigBee and Bluetooth-LE can’t transmit simultaneously and Bluetooth-LE power higher than ZigBee, so we only assess the WIFI and Bluetooth-LE simultaneous transmission. FCC ID: Q9DAPIN0514515 Page Number: 4 of 12

Report No.: 1807TW0111-U11 Test Mode: 2.4GHz, 5GHz Wi-Fi + BLE Transmit Test Site: AC1 Test Engineer: Kevin Polarity: Horizontal Antenna Type: Omni Antenna (M/N: AP-ANT-40) Model No.: APIN0514 Remark: There is the ambient noise within frequency range 9kHz~30MHz and 18GHz~40GHz, the permissible value is not show in the report. No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV/m) (dB) (dBuV/m) (dBuV) 1 5063.000 44.043 39.996 -29.957 74.000 4.047 PK 2 5063.000 30.077 26.030 -23.923 54.000 4.047 AV 3 7315.500 48.982 36.634 -25.018 74.000 12.348 PK 4 7315.500 36.378 24.030 -17.622 54.000 12.348 AV 5 8012.500 49.565 37.064 -24.435 74.000 12.501 PK 6 * 8012.500 37.241 24.740 -16.759 54.000 12.501 AV Note 1: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB). Note 2: We selected the 2.4GHz and 5GHz worst-case mode of radiated spurious emissions in the DTS and UNII reports. Note 3: 2.4GHz Wi-Fi 802.11b Channel 2437MHz Power setting =75; 5GHz Wi-Fi 802.11ax-HE80 Channel 5690MHz Power setting = 72; 2.4GHz Bluetooth LE channel 2402MHz Power setting = 8; Note 4: ZigBee and Bluetooth-LE can’t transmit simultaneously and Bluetooth-LE power higher than ZigBee, so we only assess the WIFI and Bluetooth-LE simultaneous transmission. FCC ID: Q9DAPIN0514515 Page Number: 5 of 12

Report No.: 1807TW0111-U11 Test Mode: 2.4GHz, 5GHz Wi-Fi + BLE Transmit Test Site: AC1 Test Engineer: Kevin Polarity: Vertical Antenna Type: Omni Antenna (M/N: AP-ANT-40) Model No.: APIN0514 Remark: There is the ambient noise within frequency range 9kHz~30MHz and 18GHz~40GHz, the permissible value is not show in the report. No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV/m) (dB) (dBuV/m) (dBuV) 1 6015.000 45.130 38.984 -28.870 74.000 6.146 PK 2 6015.000 31.946 25.800 -22.054 54.000 6.146 AV 3 7230.500 48.554 36.382 -25.446 74.000 12.172 PK 4 7230.500 36.062 23.890 -17.938 54.000 12.172 AV 5 10197.000 52.028 35.829 -21.972 74.000 16.199 PK 6 * 10197.000 39.839 23.640 -14.161 54.000 16.199 AV Note 1: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB). Note 2: We selected the 2.4GHz and 5GHz worst-case mode of radiated spurious emissions in the DTS and UNII reports. Note 3: 2.4GHz Wi-Fi 802.11b Channel 2437MHz Power setting =75; 5GHz Wi-Fi 802.11ax-HE80 Channel 5690MHz Power setting = 72; 2.4GHz Bluetooth LE channel 2402MHz Power setting = 8; Note 4: ZigBee and Bluetooth-LE can’t transmit simultaneously and Bluetooth-LE power higher than ZigBee, so we only assess the WIFI and Bluetooth-LE simultaneous transmission. FCC ID: Q9DAPIN0514515 Page Number: 6 of 12

Report No.: 1807TW0111-U11 Test Mode: 2.4GHz, 5GHz Wi-Fi + BLE Transmit Test Site: AC1 Test Engineer: Kevin Polarity: Horizontal Antenna Type: Omni Antenna (M/N: AP-ANT-19) Model No.: APIN0514 Remark: There is the ambient noise within frequency range 9kHz~30MHz and 18GHz~40GHz, the permissible value is not show in the report. No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV/m) (dB) (dBuV/m) (dBuV) 1 5870.500 44.653 38.849 -29.347 74.000 5.804 PK 2 5870.500 30.544 24.740 -23.456 54.000 5.804 AV 3 8021.000 50.119 37.624 -23.881 74.000 12.495 PK 4 8021.000 39.435 26.940 -14.565 54.000 12.495 AV 5 9933.500 51.289 35.984 -22.711 74.000 15.305 PK 6 * 9933.500 38.955 23.650 -15.045 54.000 15.305 AV Note 1: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB). Note 2: We selected the 2.4GHz and 5GHz worst-case mode of radiated spurious emissions in the DTS and UNII reports. Note 3: 2.4GHz Wi-Fi 802.11b Channel 2437MHz Power setting =75; 5GHz Wi-Fi 802.11ax-HE80 Channel 5690MHz Power setting = 66; 2.4GHz Bluetooth LE channel 2402MHz Power setting = 8; Note 4: ZigBee and Bluetooth-LE can’t transmit simultaneously and Bluetooth-LE power higher than ZigBee, so we only assess the WIFI and Bluetooth-LE simultaneous transmission. FCC ID: Q9DAPIN0514515 Page Number: 7 of 12

Report No.: 1807TW0111-U11 Test Mode: 2.4GHz, 5GHz Wi-Fi + BLE Transmit Test Site: AC1 Test Engineer: Kevin Polarity: Vertical Antenna Type: Omni Antenna (M/N: AP-ANT-19) Model No.: APIN0514 Remark: There is the ambient noise within frequency range 9kHz~30MHz and 18GHz~40GHz, the permissible value is not show in the report. No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV/m) (dB) (dBuV/m) (dBuV) 1 6023.500 45.634 39.467 -28.366 74.000 6.167 PK 2 6023.500 33.047 26.880 -20.953 54.000 6.167 AV 3 8012.500 49.554 37.053 -24.446 74.000 12.501 PK 4 8012.500 37.161 24.660 -16.839 54.000 12.501 AV 5 10316.000 52.086 35.431 -21.914 74.000 16.654 PK 6 * 10316.000 39.795 23.140 -14.205 54.000 16.654 AV Note 1: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB). Note 2: We selected the 2.4GHz and 5GHz worst-case mode of radiated spurious emissions in the DTS and UNII reports. Note 3: 2.4GHz Wi-Fi 802.11b Channel 2437MHz Power setting =75; 5GHz Wi-Fi 802.11ax-HE80 Channel 5690MHz Power setting = 66; 2.4GHz Bluetooth LE channel 2402MHz Power setting = 8; Note 4: ZigBee and Bluetooth-LE can’t transmit simultaneously and Bluetooth-LE power higher than ZigBee, so we only assess the WIFI and Bluetooth-LE simultaneous transmission. FCC ID: Q9DAPIN0514515 Page Number: 8 of 12

Report No.: 1807TW0111-U11 Test Mode: 2.4GHz, 5GHz Wi-Fi + BLE Transmit Test Site: AC1 Test Engineer: Kevin Polarity: Horizontal Antenna Type: Directional Antenna (M/N: AP-ANT-48) Model No.: APIN0514 Remark: There is the ambient noise within frequency range 9kHz~30MHz and 18GHz~40GHz, the permissible value is not show in the report. No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV/m) (dB) (dBuV/m) (dBuV) 1 7086.000 48.612 37.273 -25.388 74.000 11.339 PK 2 7086.000 37.689 26.350 -16.311 54.000 11.339 AV 3 8225.000 49.403 37.502 -24.597 74.000 11.902 PK 4 8225.000 38.721 26.820 -15.279 54.000 11.902 AV 5 10095.000 50.744 35.043 -23.256 74.000 15.701 PK 6 * 10095.000 40.051 24.350 -13.949 54.000 15.701 AV Note 1: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB). Note 2: We selected the 2.4GHz and 5GHz worst-case mode of radiated spurious emissions in the DTS and UNII reports. Note 3: 2.4GHz Wi-Fi 802.11b Channel 2437MHz Power setting =75; 5GHz Wi-Fi 802.11ax-HE80 Channel 5690MHz Power setting = 60; 2.4GHz Bluetooth LE channel 2402MHz Power setting = 8; Note 4: ZigBee and Bluetooth-LE can’t transmit simultaneously and Bluetooth-LE power higher than ZigBee, so we only assess the WIFI and Bluetooth-LE simultaneous transmission. FCC ID: Q9DAPIN0514515 Page Number: 9 of 12

Report No.: 1807TW0111-U11 Test Mode: 2.4GHz, 5GHz Wi-Fi + BLE Transmit Test Site: AC1 Test Engineer: Kevin Polarity: Vertical Antenna Type: Directional Antenna (M/N: AP-ANT-48) Model No.: APIN0514 Remark: There is the ambient noise within frequency range 9kHz~30MHz and 18GHz~40GHz, the permissible value is not show in the report. No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV/m) (dB) (dBuV/m) (dBuV) 1 7332.500 48.024 35.645 -25.976 74.000 12.379 PK 2 7332.500 36.759 24.380 -17.241 54.000 12.379 AV 3 8548.000 49.238 36.068 -24.762 74.000 13.170 PK 4 8548.000 39.190 26.020 -14.810 54.000 13.170 AV 5 9593.500 50.321 35.927 -23.679 74.000 14.393 PK 6 * 9593.500 37.914 23.520 -16.086 54.000 14.393 AV Note 1: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB). Note 2: We selected the 2.4GHz and 5GHz worst-case mode of radiated spurious emissions in the DTS and UNII reports. Note 3: 2.4GHz Wi-Fi 802.11b Channel 2437MHz Power setting =75; 5GHz Wi-Fi 802.11ax-HE80 Channel 5690MHz Power setting = 60; 2.4GHz Bluetooth LE channel 2402MHz Power setting = 8; Note 4: ZigBee and Bluetooth-LE can’t transmit simultaneously and Bluetooth-LE power higher than ZigBee, so we only assess the WIFI and Bluetooth-LE simultaneous transmission. FCC ID: Q9DAPIN0514515 Page Number: 10 of 12

Report No.: 1807TW0111-U11 Test Mode: 2.4GHz, 5GHz Wi-Fi + BLE Transmit Test Site: AC1 Test Engineer: Kevin Polarity: Horizontal Antenna Type: Internal Antenna Model No.: APIN0515 Remark: There is the ambient noise within frequency range 9kHz~30MHz and 18GHz~40GHz, the permissible value is not show in the report. No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV/m) (dB) (dBuV/m) (dBuV) 1 7120.000 48.444 36.833 -25.556 74.000 11.611 PK 2 7120.000 36.571 24.960 -17.429 54.000 11.611 AV 3 7681.000 49.575 37.113 -24.425 74.000 12.462 PK 4 7681.000 38.252 25.790 -15.748 54.000 12.462 AV 5 9304.500 49.600 34.924 -24.400 74.000 14.675 PK 6 * 9304.500 37.866 23.190 -16.134 54.000 14.675 AV Note 1: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB). Note 2: We selected the 2.4GHz and 5GHz worst-case mode of radiated spurious emissions in the DTS and UNII reports. Note 3: 2.4GHz Wi-Fi 802.11b Channel 2437MHz Power setting = 76; 5GHz Wi-Fi 802.11ax-HE80 Channel 5690MHz Power setting = 67; 2.4GHz Bluetooth LE channel 2402MHz Power setting = 8; Note 4: ZigBee and Bluetooth-LE can’t transmit simultaneously and Bluetooth-LE power higher than ZigBee, so we only assess the WIFI and Bluetooth-LE simultaneous transmission. FCC ID: Q9DAPIN0514515 Page Number: 11 of 12

Report No.: 1807TW0111-U11 Test Mode: 2.4GHz, 5GHz Wi-Fi + BLE Transmit Test Site: AC1 Test Engineer: Kevin Polarity: Vertical Antenna Type: Internal Antenna Model No.: APIN0515 Remark: There is the ambient noise within frequency range 9kHz~30MHz and 18GHz~40GHz, the permissible value is not show in the report. No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV/m) (dB) (dBuV/m) (dBuV) 1 6363.500 45.687 38.191 -28.313 74.000 7.496 PK 2 6363.500 33.976 26.480 -20.024 54.000 7.496 AV 3 7672.500 48.516 36.036 -25.484 74.000 12.481 PK 4 7672.500 37.870 25.390 -16.130 54.000 12.481 AV 5 9738.000 51.034 36.273 -22.966 74.000 14.761 PK 6 * 9738.000 40.151 25.390 -13.849 54.000 14.761 AV Note 1: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB). Note 2: We selected the 2.4GHz and 5GHz worst-case mode of radiated spurious emissions in the DTS and UNII reports. Note 3: 2.4GHz Wi-Fi 802.11b Channel 2437MHz Power setting = 76; 5GHz Wi-Fi 802.11ax-HE80 Channel 5690MHz Power setting = 67; 2.4GHz Bluetooth LE channel 2402MHz Power setting = 8; Note 4: ZigBee and Bluetooth-LE can’t transmit simultaneously and Bluetooth-LE power higher than ZigBee, so we only assess the WIFI and Bluetooth-LE simultaneous transmission. The End FCC ID: Q9DAPIN0514515 Page Number: 12 of 12


Document Created: 2019-01-06 20:54:57
Document Modified: 2019-01-06 20:54:57
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC