Test Report_20190106_v1 - 1807TW0111-U10-RF Exposure Report

FCC ID: Q9DAPIN0514515

Test Report

Download: PDF
FCCID_4148512

MRT Technology (Taiwan) Co., Ltd Report No.: 1807TW0111-U10 Phone: +886-3-3288388 Report Vers ion: V01 Web: www.mrt-cert.com Iss ue Date: 12- 15-2018 RF Exposure Evaluation Declaration FCC ID: Q9DAPIN0514515 APPLICANT: Hewlett Packard Enterprise Company Application Type: Class III Permissive Change Product: ACCESS POINT Model No.: APIN0514, APIN0515 Trademark: , FCC Classification: Digital Transmission System (DTS) Unlicensed National Information Infrastructure (UNII) Reviewed By: ( Paddy Chen ) Approved By: ( Chenz Ker ) The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standards through the calibration of the equipment and evaluated measurement uncertainty herein. The test report shall not be reproduced except in full without the written approval of MRT Technology (Taiwan) Co., Ltd. FCC ID: Q9DAPIN0514515 Page Number: 1 of 10

Report No.: 1807TW0111-U10 Revision History Report No. Version Description Issue Date Note 1807TW0111-U10 Rev. 01 Initial report 12-15-2018 Valid FCC ID: Q9DAPIN0514515 Page Number: 2 of 10

Report No.: 1807TW0111-U10 1. PRODUCT INFORMATION 1.1. Equipment Description Product Name: ACCESS POINT Model No.: APIN0514, APIN0515 Brand Name: , Wi-Fi Specification: 802.11a/b/g/n/ac/ax Bluetooth Specification: v4.2 single mode Zigbee Specification: 802.15.4 Software Version: F.0.8 Operating Temperature: 0 ~ 50 °C Power Type: AC Adapter or POE input Operating Environment: Indoor Use Note: The difference between models is that EUT use different antenna and appearance, APIN0514 use some external antennas, but APIN0515 use internal antenna, other hardware and software are the same. Besides, each model has its own power parameter value. FCC ID: Q9DAPIN0514515 Page Number: 3 of 10

Report No.: 1807TW0111-U10 1.2. Antenna Description Model No.: APIN0514 Antenna Directionalit Frequency Model No. Max BF Gain CDD Directional Gain No. y Band Peak (dBi) (dBi) (GHz) Gain For Power For PSD (dBi) Wi-Fi External Antenna List (2.4GHz 2*2 MIMO, 5GHz 4*4 MIMO) 2.4 4.0 3.01 4.0 7.01 1 Omni AP-ANT-40 5 5.0 6.02 5.0 11.02 2.4 3.0 3.01 3.0 6.01 2 Omni AP-ANT-19 5 6.0 6.02 6.0 12.02 2.4 3.8 3.01 3.8 6.81 3 Omni AP-ANT-1W 5 5.8 6.02 5.8 11.82 2.4 2.3 3.01 2.3 5.31 4 Omni AP-ANT-13B 5 4.0 6.02 4.0 10.02 2.4 2.0 3.01 2.0 5.01 5 Omni AP-ANT-20W 5 2.0 6.02 2.0 8.02 2.4 4.5 0.00 4.5 4.50 6 (Note 3) Directional AP-ANT-45 5 5.5 3.01 5.5 8.51 2.4 8.5 0.00 8.5 8.5 7 (Note 3) Directional AP-ANT-48 5 8.5 3.01 8.5 11.51 Bluetooth & ZigBee Internal Antenna PCB 2.4 4.9 Model No.: APIN0515 Directionality Frequency Band Max BF Gain CDD Directional (GHz) Peak Gain (dBi) Gain (dBi) (dBi) For Power For PSD Wi-Fi Internal Antenna List (2.4GHz 2*2 MIMO, 5GHz 4*4 MIMO) Omni 2.4 3.77 3.01 3.77 6.78 Omni 5 4.55 5.97 4.55 10.52 Bluetooth & ZigBee Internal Antenna PCB 2.4 3.5 FCC ID: Q9DAPIN0514515 Page Number: 4 of 10

IVR I A Report No.: 1807TWO111—U10 Note: 1. The EUT supports Cyclic Delay Diversity (CDD) mode, and CDD signals are correlated. For CDD transmissions, directional gain is calculated as follows, Nayr = 2, Nss = 1. If all antennas have the same gain, Gayy, Directional gain = Gayr + Array Gain, where Array Gain is as follows. + For power spectral density (PSD) measurements on all devices, Array Gain = 10 log (Nayy/ Nss) dB = 3.01; + For power measurements on IEEE 802.11 devices, Array Gain = 0 dB for Nayr S 4; 2. The EUT also supports Beam Forming mode, and the Beam Forming support 802.11n/ac/ax, not include 802.11a/b/g. Directional gain = Gayr + BF Gain, BF Gain was declared by the applicant. 3. Two antennas have Cross—Polarized design, the detail see the antenna specification. FCC ID: QgDAPINO514515 Page Number: 5 of 10

Report No.: 1807TW0111-U10 2. RF Exposure Evaluation 2.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time 2 (MHz) Strength (V/m) Strength (A/m) (mW/cm ) (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- f/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- f/1500 6 1500-100,000 -- -- 1 30 f= Frequency in MHz Calculation Formula: Pd = (Pout*G)/(4*pi*r2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 r = distance between observation point and center of the radiator in cm Pd is the limit of MPE, 1mW/cm². If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. FCC ID: Q9DAPIN0514515 Page Number: 6 of 10

Report No.: 1807TW0111-U10 2.2. Test Result of RF Exposure Evaluation Product ACCESS POINT Test Item RF Exposure Evaluation Antenna Gain: Refer to clause 1.2. Maximum EIRP for each model Test Mode Frequency Band Max Conducted Antenna Gain Max EIRP (MHz) Power (dBi) (dBm) (dBm) Model No.: APIN0514 BLE 2402 ~ 2480 7.29 4.9 12.19 ZigBee 2405 ~ 2480 6.69 4.9 11.59 802.11b/g/n 2412 ~ 2462 21.19 2.0 23.19 5180 ~ 5320, 802.11a/n/ac 5500 ~ 5720, 24.14 2.0 26.14 5745 ~ 5825 Model No.: APIN0515 BLE 2402 ~ 2480 7.95 3.5 11.45 ZigBee 2405 ~ 2480 6.98 3.5 10.48 802.11b/g/n 2412 ~ 2462 21.27 3.77 25.04 5180 ~ 5320, 802.11a/n/ac 5500 ~ 5720, 24.37 4.55 28.92 5745 ~ 5825 FCC ID: Q9DAPIN0514515 Page Number: 7 of 10

Report No.: 1807TW0111-U10 Model No.: APIN0514 Test Mode Frequency Band Maximum EIRP Power Density at Limit (MHz) (dBm) R = 20 cm (mW/cm2) (mW/cm2) BLE 2402 ~ 2480 12.19 0.0033 1 ZigBee 2405 ~ 2480 11.59 0.0029 1 802.11b/g/n 2412 ~ 2462 23.19 0.0415 1 5180 ~ 5320, 802.11a/n/ac 5500 ~ 5720, 26.14 0.0818 1 5745 ~ 5825 CONCULISON: Both of the WLAN 2.4GHz Band, WLAN 5GHz Band, BLE or ZigBee Band can transmit simultaneously. The max Power Density at R (20 cm) = 0.0033mW/cm2 + 0.0415mW/cm2 + 0.0818mW/cm2 = 0.1266mW/cm2 < 1mW/cm2. Therefore, the Min Safety Distance is 20cm. Model No.: APIN0515 Test Mode Frequency Band Maximum EIRP Power Density at Limit (MHz) (dBm) R = 20 cm (mW/cm2) (mW/cm2) BLE 2402 ~ 2480 11.45 0.0028 1 ZigBee 2405 ~ 2480 10.48 0.0022 1 802.11b/g/n 2412 ~ 2462 25.04 0.0635 1 5180 ~ 5320, 802.11a/n/ac 5500 ~ 5720, 28.92 0.1551 1 5745 ~ 5825 CONCULISON: Both of the WLAN 2.4GHz Band, WLAN 5GHz Band, BLE or ZigBee band can transmit simultaneously. The max Power Density at R (20 cm) = 0.0028mW/cm2 + 0.0635mW/cm2 + 0.1551mW/cm2 = 0.2214mW/cm2 < 1mW/cm2. Therefore, the Min Safety Distance is 20cm. The End FCC ID: Q9DAPIN0514515 Page Number: 8 of 10

Report No.: 1807TW0111-U10 Appendix A - Test Setup Photograph Refer to “ 1807TW0111-UT” file. FCC ID: Q9DAPIN0514515 Page Number: 9 of 10

Report No.: 1807TW0111-U10 Appendix B - EUT Photograph Refer to “1807TW0111-UE” file. FCC ID: Q9DAPIN0514515 Page Number: 10 of 10


Document Created: 2019-01-05 15:35:32
Document Modified: 2019-01-05 15:35:32
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC