Test Report_20180926_v1 - 1807TW0111-U3-FCC UNII Test Report (Wi-Fi)_Part8

FCC ID: Q9DAPIN0514515

Test Report

Download: PDF
FCCID_4071587

Report No.: 1807TW0111-U3 Site: AC1 Time: 2018/06/20 - 08:20 Limit: FCC_Part15.209_RE(3m) Engineer: Kevin Probe: BBHA9120D_1GHz_18GHz Polarity: Vertical EUT: ACCESS POINT Power: AC 120V/60Hz Test Mode: Transmit by 802.11ax-HE80 at Channel 5210MHz Ant 0 + 1 + 2 + 3 No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV/m) (dB) (dBuV/m) (dBuV) 1 5135.275 71.507 67.332 -2.493 74.000 4.175 PK 2 5150.000 66.753 62.584 -7.247 74.000 4.170 PK 3 * 5199.925 113.197 109.198 N/A N/A 3.998 PK Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB) FCC ID: Q9DAPIN0514515 Page Number: 434 of 444

Report No.: 1807TW0111-U3 Site: AC1 Time: 2018/06/20 - 08:18 Limit: FCC_Part15.209_RE(3m) Engineer: Kevin Probe: BBHA9120D_1GHz_18GHz Polarity: Vertical EUT: ACCESS POINT Power: AC 120V/60Hz Test Mode: Transmit by 802.11ax-HE80 at Channel 5210MHz Ant 0 + 1 + 2 + 3 No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV/m) (dB) (dBuV/m) (dBuV) 1 5149.825 53.385 49.215 -0.615 54.000 4.170 AV 2 5150.000 53.056 48.887 -0.944 54.000 4.170 AV 3 * 5195.200 101.048 97.033 N/A N/A 4.015 AV Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB) FCC ID: Q9DAPIN0514515 Page Number: 435 of 444

Report No.: 1807TW0111-U3 Site: AC1 Time: 2018/06/20 - 08:54 Limit: FCC_Part15.407_RE(3m) Engineer: Kevin Probe: BBHA9120D_1GHz_18GHz Polarity: Horizontal EUT: ACCESS POINT Power: AC 120V/60Hz Test Mode: Transmit by 802.11ax-HE80 at Channel 5775MHz Ant 0 + 1 + 2 + 3 No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV/m) (dB) (dBuV/m) (dBuV) 1 * 5632.200 63.850 59.235 -4.350 68.200 4.615 PK 2 5650.000 62.624 57.953 -5.576 68.200 4.671 PK 3 5700.000 64.711 59.833 -40.489 105.200 4.878 PK 4 5720.000 72.757 67.760 -38.043 110.800 4.997 PK 5 5725.000 70.181 65.152 -52.019 122.200 5.029 PK 6 5771.600 112.129 106.830 N/A N/A 5.299 PK 7 5850.000 71.076 65.350 -51.124 122.200 5.726 PK 8 5855.000 68.486 62.740 -42.314 110.800 5.746 PK 9 5875.000 65.817 59.997 -39.383 105.200 5.820 PK 10 5925.000 62.321 56.355 -5.879 68.200 5.967 PK 11 5991.600 63.574 57.477 -4.626 68.200 6.097 PK Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB) FCC ID: Q9DAPIN0514515 Page Number: 436 of 444

Report No.: 1807TW0111-U3 Site: AC1 Time: 2018/06/20 - 08:53 Limit: FCC_Part15.407_RE(3m) Engineer: Kevin Probe: BBHA9120D_1GHz_18GHz Polarity: Vertical EUT: ACCESS POINT Power: AC 120V/60Hz Test Mode: Transmit by 802.11ax-HE80 at Channel 5775MHz Ant 0 + 1 + 2 + 3 No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV/m) (dB) (dBuV/m) (dBuV) 1 5649.800 64.788 60.118 -3.412 68.200 4.670 PK 2 * 5650.000 65.643 60.972 -2.557 68.200 4.671 PK 3 5700.000 66.632 61.754 -38.568 105.200 4.878 PK 4 5720.000 72.768 67.771 -38.032 110.800 4.997 PK 5 5725.000 71.752 66.723 -50.448 122.200 5.029 PK 6 5771.200 113.561 108.264 N/A N/A 5.297 PK 7 5850.000 71.788 66.062 -50.412 122.200 5.726 PK 8 5855.000 71.438 65.692 -39.362 110.800 5.746 PK 9 5875.000 66.506 60.686 -38.694 105.200 5.820 PK 10 5925.000 62.247 56.281 -5.953 68.200 5.967 PK 11 6000.000 63.533 57.421 -4.667 68.200 6.112 PK Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB) FCC ID: Q9DAPIN0514515 Page Number: 437 of 444

Report No.: 1807TW0111-U3 7.10. AC Conducted Emissions Measurement 7.10.1. TestLimit FCC Part 15.207 Limits Frequency QP AV (MHz) (dBμV) (dBμV) 0.15 - 0.50 66 - 56 56 - 46 0.50 - 5.0 56 46 5.0 - 30 60 50 Note 1: The lower limit shall apply at the transition frequencies. Note 2: The limit decreases linearly with the logarithm of the frequency in the range 0.15MHz to 0.5MHz. 7.10.2. Test Procedure The EUT was setup according to ANSI C63.4, 2009 and tested according to KDB 789033 for compliance to FCC 47CFR 15.247 requirements.The EUT was placed on a platform of nominal size, 1 m by 1.5 m, raised 80 cm above the conducting ground plane. The vertical conducting plane was located 40 cm to the rear of the EUT. All other surfaces of EUT were at least 80 cm from any other grounded conducting surface. The EUT and simulators are connected to the main power through a line impedance stabilization network (LISN). The LISN provides a 50 ohm /50uH coupling impedance for the measuring equipment. The peripheral devices are also connected to the main power through a LISN. (Please refer to the block diagram of the test setup and photographs)Each current-carrying conductor of the EUT power cord, except the ground (safety) conductor, was individually connected through a LISN to the input power source. The excess length of the power cord between the EUT and the LISN receptacle were folded back and forth at the center of the lead to form a bundle not exceeding 40 cm in length. Conducted emissions were investigated over the frequency range from 0.15MHz to 30MHz using a receiver bandwidth of 9kHz. FCC ID: Q9DAPIN0514515 Page Number: 438 of 444

Report No.: 1807TW0111-U3 7.10.3. Test Setup FCC ID: Q9DAPIN0514515 Page Number: 439 of 444

Report No.: 1807TW0111-U3 7.10.4.Test Result For APIN0514: Site: SR2 Time: 2018/07/25 - 10:38 Limit: FCC_Part15.207_CE Engineer: Kevin Ker Probe: ENV216_101683_Filter On Polarity: Line EUT: ACCESS POINT Power: AC 120V/60Hz Test Mode: Mode 1 No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV) (dB) (dBuV) (dBuV) 1 * 0.162 51.930 41.833 -13.431 65.361 10.097 QP 2 0.162 35.574 25.477 -19.786 55.361 10.097 AV 3 0.190 45.272 35.243 -18.765 64.037 10.029 QP 4 0.190 25.646 15.617 -28.391 54.037 10.029 AV 5 0.230 41.013 31.065 -21.437 62.450 9.947 QP 6 0.230 25.543 15.596 -26.907 52.450 9.947 AV 7 0.370 40.745 30.684 -17.756 58.501 10.061 QP 8 0.370 31.410 21.349 -17.091 48.501 10.061 AV 9 3.490 28.608 18.701 -27.392 56.000 9.907 QP 10 3.490 17.876 7.969 -28.124 46.000 9.907 AV 11 12.798 28.950 18.868 -31.050 60.000 10.083 QP 12 12.798 22.715 12.633 -27.285 50.000 10.083 AV Note: Measure Level (dBμV) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + LISN Factor (dB) FCC ID: Q9DAPIN0514515 Page Number: 440 of 444

Report No.: 1807TW0111-U3 Site: SR2 Time: 2018/07/25 - 10:42 Limit: FCC_Part15.207_CE Engineer: Kevin Ker Probe: ENV216_101683_Filter On Polarity: Neutral EUT: ACCESS POINT Power: AC 120V/60Hz Test Mode: Mode 1 No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV) (dB) (dBuV) (dBuV) 1 0.162 51.656 41.578 -13.705 65.361 10.078 QP 2 0.162 34.925 24.847 -20.436 55.361 10.078 AV 3 0.178 46.651 36.601 -17.928 64.578 10.049 QP 4 0.178 27.982 17.933 -26.596 54.578 10.049 AV 5 0.330 40.810 30.750 -18.641 59.451 10.060 QP 6 0.330 33.149 23.090 -16.302 49.451 10.060 AV 7 0.362 43.243 33.159 -15.439 58.682 10.084 QP 8 * 0.362 35.706 25.622 -12.976 48.682 10.084 AV 9 3.478 28.667 18.755 -27.333 56.000 9.913 QP 10 3.478 19.120 9.207 -26.880 46.000 9.913 AV 11 12.306 30.349 20.234 -29.651 60.000 10.115 QP 12 12.306 24.685 14.570 -25.315 50.000 10.115 AV Note: Measure Level (dBμV) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + LISN Factor (dB) FCC ID: Q9DAPIN0514515 Page Number: 441 of 444

Report No.: 1807TW0111-U3 For APIN0515: Site: SR2 Time: 2018/07/25 - 10:02 Limit: FCC_Part15.207_CE Engineer: Kevin Ker Probe: ENV216_101683_Filter On Polarity: Line EUT: ACCESS POINT Power: AC 120V/60Hz Test Mode: Mode 1 No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV) (dB) (dBuV) (dBuV) 1 * 0.150 54.857 43.689 -11.143 66.000 11.168 QP 2 0.150 31.518 20.350 -24.482 56.000 11.168 AV 3 0.174 50.189 40.121 -14.578 64.767 10.068 QP 4 0.174 32.880 22.812 -21.887 54.767 10.068 AV 5 0.230 41.016 31.069 -21.434 62.450 9.947 QP 6 0.230 24.610 14.663 -27.840 52.450 9.947 AV 7 0.378 39.278 29.211 -19.045 58.323 10.067 QP 8 0.378 29.541 19.473 -18.783 48.323 10.067 AV 9 3.626 30.291 20.368 -25.709 56.000 9.922 QP 10 3.626 20.097 10.174 -25.903 46.000 9.922 AV 11 12.414 29.703 19.630 -30.297 60.000 10.073 QP 12 12.414 23.636 13.564 -26.364 50.000 10.073 AV Note: Measure Level (dBμV) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + LISN Factor (dB) FCC ID: Q9DAPIN0514515 Page Number: 442 of 444

Report No.: 1807TW0111-U3 Site: SR2 Time: 2018/07/25 - 10:42 Limit: FCC_Part15.207_CE Engineer: Kevin Ker Probe: ENV216_101683_Filter On Polarity: Neutral EUT: ACCESS POINT Power: AC 120V/60Hz Test Mode: Mode 1 No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV) (dB) (dBuV) (dBuV) 1 0.150 53.531 42.389 -12.469 66.000 11.142 QP 2 0.150 31.361 20.219 -24.639 56.000 11.142 AV 3 0.166 52.592 42.521 -12.566 65.158 10.071 QP 4 0.166 36.887 26.816 -18.271 55.158 10.071 AV 5 0.198 46.367 36.352 -17.327 63.694 10.015 QP 6 0.198 30.493 20.479 -23.201 53.694 10.015 AV 7 0.370 43.448 33.358 -15.053 58.501 10.090 QP 8 * 0.370 37.435 27.345 -11.066 48.501 10.090 AV 9 3.662 30.170 20.231 -25.830 56.000 9.939 QP 10 3.662 20.724 10.785 -25.276 46.000 9.939 AV 11 12.578 30.705 20.606 -29.295 60.000 10.099 QP 12 12.578 24.998 14.899 -25.002 50.000 10.099 AV Note: Measure Level (dBμV) = Reading Level (dBμV) + Factor (dB) Factor (dB) = Cable Loss (dB) + LISN Factor (dB) FCC ID: Q9DAPIN0514515 Page Number: 443 of 444

Report No.: 1807TW0111-U3 8. CONCLUSION The data collected relate only the item(s) tested and show that the ACCESS POINT is in compliance with Part 15E of the FCC Rules. The End FCC ID: Q9DAPIN0514515 Page Number: 444 of 444


Document Created: 2018-09-26 17:31:00
Document Modified: 2018-09-26 17:31:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC