Test Report_20191001_v1 - 1906TW0102-U3-FCC DTS Test Report (Wi-Fi) Rev2_Part2.p

FCC ID: Q9DAPIN0504505

Test Report

Download: PDF
FCCID_4474142

Report No.: 1906TW0102-U3 802.11g AVGPSD - Ant 1 / Ant 0 + 1 Channel 01 (2412MHz) Channel 06 (2437MHz) Channel 11 (2462MHz) FCC ID: Q9DAPIN0504505 Page Number: 46 of 462

Report No.: 1906TW0102-U3 802.11n-HT20 AVGPSD - Ant 1 / Ant 0 + 1 Channel 01 (2412MHz) Channel 06 (2437MHz) Channel 11 (2462MHz) FCC ID: Q9DAPIN0504505 Page Number: 47 of 462

Report No.: 1906TW0102-U3 802.11n-HT40 AVGPSD - Ant 1 / Ant 0 + 1 Channel 03 (2422MHz) Channel 06 (2437MHz) Channel 09 (2452MHz) FCC ID: Q9DAPIN0504505 Page Number: 48 of 462

Report No.: 1906TW0102-U3 802.11ax-HE20 AVGPSD - Ant 1 / Ant 0 + 1 Channel 01 (2412MHz) Channel 06 (2437MHz) Channel 11 (2462MHz) FCC ID: Q9DAPIN0504505 Page Number: 49 of 462

Report No.: 1906TW0102-U3 802.11ax-HE40 AVGPSD - Ant 1 / Ant 0 + 1 Channel 03 (2422MHz) Channel 06 (2437MHz) Channel 09 (2452MHz) FCC ID: Q9DAPIN0504505 Page Number: 50 of 462

Report No.: 1906TW0102-U3 Product ACCESS POINT Temperature 25°C Test Engineer Kevin Ker Relative Humidity 54% Model No. APIN0505 802.11b AVGPSD - Ant 0 / Ant 0 + 1 Channel 01 (2412MHz) Channel 06 (2437MHz) Channel 11 (2462MHz) FCC ID: Q9DAPIN0504505 Page Number: 51 of 462

Report No.: 1906TW0102-U3 802.11g AVGPSD - Ant 0 / Ant 0 + 1 Channel 01 (2412MHz) Channel 06 (2437MHz) Channel 11 (2462MHz) FCC ID: Q9DAPIN0504505 Page Number: 52 of 462

Report No.: 1906TW0102-U3 802.11n-HT20 AVGPSD - Ant 0 / Ant 0 + 1 Channel 01 (2412MHz) Channel 06 (2437MHz) Channel 11 (2462MHz) FCC ID: Q9DAPIN0504505 Page Number: 53 of 462

Report No.: 1906TW0102-U3 802.11n-HT40 AVGPSD - Ant 0 / Ant 0 + 1 Channel 03 (2422MHz) Channel 06 (2437MHz) Channel 09 (2452MHz) FCC ID: Q9DAPIN0504505 Page Number: 54 of 462

Report No.: 1906TW0102-U3 802.11ax-HE20 AVGPSD - Ant 0 / Ant 0 + 1 Channel 01 (2412MHz) Channel 06 (2437MHz) Channel 11 (2462MHz) FCC ID: Q9DAPIN0504505 Page Number: 55 of 462

Report No.: 1906TW0102-U3 802.11ax-HE40 AVGPSD - Ant 0 / Ant 0 + 1 Channel 03 (2422MHz) Channel 06 (2437MHz) Channel 09 (2452MHz) FCC ID: Q9DAPIN0504505 Page Number: 56 of 462

Report No.: 1906TW0102-U3 802.11b AVGPSD - Ant 1 / Ant 0 + 1 Channel 01 (2412MHz) Channel 06 (2437MHz) Channel 11 (2462MHz) FCC ID: Q9DAPIN0504505 Page Number: 57 of 462

Report No.: 1906TW0102-U3 802.11g AVGPSD - Ant 1 / Ant 0 + 1 Channel 01 (2412MHz) Channel 06 (2437MHz) Channel 11 (2462MHz) FCC ID: Q9DAPIN0504505 Page Number: 58 of 462

Report No.: 1906TW0102-U3 802.11n-HT20 AVGPSD - Ant 1 / Ant 0 + 1 Channel 01 (2412MHz) Channel 06 (2437MHz) Channel 11 (2462MHz) FCC ID: Q9DAPIN0504505 Page Number: 59 of 462

Report No.: 1906TW0102-U3 802.11n-HT40 AVGPSD - Ant 1 / Ant 0 + 1 Channel 03 (2422MHz) Channel 06 (2437MHz) Channel 09 (2452MHz) FCC ID: Q9DAPIN0504505 Page Number: 60 of 462

Report No.: 1906TW0102-U3 802.11ax-HE20 AVGPSD - Ant 1 / Ant 0 + 1 Channel 01 (2412MHz) Channel 06 (2437MHz) Channel 11 (2462MHz) FCC ID: Q9DAPIN0504505 Page Number: 61 of 462

Report No.: 1906TW0102-U3 802.11ax-HE40 AVGPSD - Ant 1 / Ant 0 + 1 Channel 03 (2422MHz) Channel 06 (2437MHz) Channel 09 (2452MHz) FCC ID: Q9DAPIN0504505 Page Number: 62 of 462

Report No.: 1906TW0102-U3 7.5. Conducted Band Edge and Out-of-Band Emissions 7.5.1.Test Limit The limit for out-of-band spurious emissions at the band edge is 30dB below the fundamental emission level, as determined from the in-band power measurement of the DTS channel performed in a 100 kHz bandwidth per the PSD procedure. 7.5.2.Test Procedure Used ANSI C63.10 Section 11.11 7.5.3.Test Settitng Reference level measurement 1. Set instrument center frequency to DTS channel center frequency 2. Set the span to ≥ 1.5 times the DTS bandwidth 3. Set the RBW = 100 kHz 4. Set the VBW ≥ 3 x RBW 5. Detector = peak 6. Sweep time = auto couple 7. Trace mode = max hold 8. Allow trace to fully stabilize Emission level measurement 1. Start frequency was set to 30MHz and stop frequency was set to 25GHz (separated into two plots per channel) 2. RBW = 1.3MHz 3. VBW = 4MHz 4. Detector = Peak 5. Trace mode = max hold 6. Sweep time = auto couple 7. The trace was allowed to stabilize FCC ID: Q9DAPIN0504505 Page Number: 63 of 462

Report No.: 1906TW0102-U3 Test Notes 1. RBW was set to 1.3MHz rather than 100kHz in order to increase the measurement speed. 2. The display line shown in the following plots denotes the limit at 30dB below the fundamental emission level measured in a 100kHz bandwidth. However, since the traces in the following plots are measured with a 1.3MHz RBW, the display line may not necessarily appear to be 30dB below the level of the fundamental in a 1.3MHz bandwidth. 3. For plots showing conducted spurious emissions near the limit, the frequencies were investigated with a reduced RBW to ensure that no emissions were present. 7.5.4.Test Setup FCC ID: Q9DAPIN0504505 Page Number: 64 of 462

Report No.: 1906TW0102-U3 7.5.5.Test Result Product ACCESS POINT Temperature 25°C Test Engineer Kevin Ker Relative Humidity 54% Test Site SR2 Test Date 2019/06/04 Conducted Band Edge and Mode No. APIN0504 Test Item Out-of-Band Emissions Test Mode Data Rate Channel No. Frequency Limit Result / MCS (MHz) (dBc) Ant 1 / Ant 0 + 1 802.11b 1Mbps 01 2412 30 Pass 802.11b 1Mbps 06 2437 30 Pass 802.11b 1Mbps 11 2462 30 Pass 802.11g 6Mbps 01 2412 30 Pass 802.11g 6Mbps 06 2437 30 Pass 802.11g 6Mbps 11 2462 30 Pass 802.11n-HT20 MCS0 01 2412 30 Pass 802.11n-HT20 MCS0 06 2437 30 Pass 802.11n-HT20 MCS0 11 2462 30 Pass 802.11n-HT40 MCS0 03 2422 30 Pass 802.11n-HT40 MCS0 06 2437 30 Pass 802.11n-HT40 MCS0 09 2452 30 Pass 802.11ax-HE20 MCS0 01 2412 30 Pass 802.11ax-HE20 MCS0 06 2437 30 Pass 802.11ax-HE20 MCS0 11 2462 30 Pass 802.11ax-HE40 MCS0 03 2422 30 Pass 802.11ax-HE40 MCS0 06 2437 30 Pass 802.11ax-HE40 MCS0 09 2452 30 Pass FCC ID: Q9DAPIN0504505 Page Number: 65 of 462

Report No.: 1906TW0102-U3 802.11b Out-of-Band Emissions - Ant 1 / Ant 0 + 1 Channel 01 (2412MHz) 100kHz PSD reference Level Low Band Edge Spurious Emission Note: The Value of the Display Line is -19.19dBm Channel 06 (2437MHz) 100kHz PSD reference Level Spurious Emission Note: The Value of the Display Line is -19.13dBm FCC ID: Q9DAPIN0504505 Page Number: 66 of 462

Report No.: 1906TW0102-U3 802.11b Out-of-Band Emissions - Ant 1 / Ant 0 + 1 Channel 11 (2462MHz) 100kHz PSD reference Level High Band Edge Spurious Emission Note: The Value of the Display Line is -18.96dBm FCC ID: Q9DAPIN0504505 Page Number: 67 of 462


Document Created: 2019-10-01 17:59:11
Document Modified: 2019-10-01 17:59:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC