1906TW0102-U5-RF Exposure Report Rev2.pdf

FCC ID: Q9DAPIN0504505

RF Exposure Info

Download: PDF
FCCID_4474141

MRT Technology (Taiwan) Co., Ltd Report No.: 1906TWO102—US5 A Phone: +886—3—3288388 Report Version: VO2 Web: www.mrt—cert.com Issue Date: 10—03—2019 RF Exposure Evaluation Declaration FCC ID: Q9DAPINO504505 APPLICANT: Hewlett Packard Enterprise Company Application Type: Certification Product: ACCESS POINT Model No.: APINO504, APINO505 Trademark: aruba = Hewlett Packard a Hewlett Packard Enterprise Enterprise company 3 FCC Classification: Digital Transmission System (DTS) Unlicensed National Information Infrastructure (UNII) Reviewed By: /Da/;( Clen. \\\\\‘u'//,/, (Paddy Chen) M 1'AF Approved By @/”b/ /Kw %@g Testing Laboratory nz (CheKer) Zolulubs® 5261 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standards through the calibration of the equipment and evaluated measurement uncertainty herein. The test report shall not be reproduced except in full without the written approval of MRT Technology (Taiwan) Co., Ltd. FCC ID: Q9DAPINO504505 Page Number: 1 of 9

WR I ‘ Report No.: 1906TWO102—U5 Revision History 1906TWO102—U5 Rev. 01 Initial report 07—15—2019 Invalid 1906TWO102—U5 Rev. 02 power refer to OD Revise the conducted 10—03—2019 Valid FCC ID: Q9DAPINO504505 Page Number: 2 of 9

WM Ih I Report No.: 1906TWO102—U5 1. PRODUCT INFORMATION 1.1. Equipment Description Product Name: ACCESS POINT Model No.: APINO504, APINO505 Brand Name: QFI‘:E:T{PGL‘O ?wlettPackard Enterprise Enterprise company , Wi—Fi Specification: 802.11a/b/g/n/ac/ax Bluetooth Specification: |v4.2 single mode Zigbee Specification: |802.15.4 Operating Temperature: |0 ~ 50 °C Power Type: AC Adapter or POE input Operating Environment: |Indoor Use Note: The difference between models is that EUT use different antenna and appearance, APINO504 use some external antennas, but APINO505 use internal antenna, other hardware and software are the same. Besides, each model has its own power parameter value. FCC ID: Q9DAPINO504505 Page Number: 3 of 9

Ve°T Report No.: 1906TWO102—US5 1.2. Antenna Description APINO504 2.4 3.8 6.81 3.8 6.81 1 Omni AP—ANT—1W 5 5.8 8.81 5.8 8.81 2.4 2.3 5.31 2.3 5.31 2 Omni AP—ANT—13B 5 4.0 7.01 4.0 7.01 2.4 3.0 6.01 3.0 6.01 3 Omni AP—ANT—19 5 6.0 9.01 6.0 9.01 2.4 2.0 5.01 2.0 5.01 4 Omni AP—ANT—20W 5 2.0 5.01 2.0 5.01 2.4 4.0 7.01 4.0 7.01 5 Omni AP—ANT—40 5 5.0 8.01 5.0 8.01 2.4 5.0 5.0 5.0 8.01 6 (Note 3) Directional AP—ANT—25A 5 5.0 5.0 5.0 8.01 2.4 7.5 7.5 7.5 10.51 7 (Note 3) Directional AP—ANT—28 5 7.5 7.5 7.5 10.51 PCB 2.4 3.3 APINO505 Omni 2.4 4.29 7.08 4.29 7.08 PCB 2.4 3.3 FCC ID: Q9DAPINO504505 Page Number: 4 of 9

WR IA Report No.: 1906TWO102—U5 Note: 1. The EUT supports Cyclic Delay Diversity (CDD) mode, and CDD signals are correlated. For CDD transmissions, directional gain is calculated as follows, Nant = 2, Nss = 1. If all antennas have the same gain, Gant, Directional gain = Gant + Array Gain, where Array Gain is as follows. * For power spectral density (PSD) measurements on all devices, Array Gain = 10 log (Nant/ Nss) dB = 3.01; * For power measurements on IEEE 802.11 devices, Array Gain = 0 dB for Nant § 4; 2. The EUT also supports Beam Forming mode, and the Beam Forming support 802.11n/ac/ax, not include 802.11a/b/g. Directional gain = Gant + BF Gain, BF Gain was declared by the applicant. 3. Two antennas have Cross—Polarized design, the detail see the antenna specification. FCC ID: Q9DAPINO504505 Page Number: 5 of 9

Report No.: 1906TWO102—US5 2. RF Exposure Evaluation 2.1. Limits According to FCC 1.1310:; The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time (MHz) Strength (V/m) Strength (A/m) ({mW/cm?) (Minutes) (A) Limits for Occupational/ Control Exposures 300—1500 —— —— 17300 1500—100,000 —— —— 5 (B) Limits for General Population/ Uncontrolled Exposures 300—1500 —— —— 1500 6 1500—100,000 —— —— 1 30 f= Frequency in MHz Calculation Formula: Pd = (Pout*G)/(4*pi*r?) Where Pd = power density in mW/cm* Pout = output power to antenna in mW G = gain of antenna in linear scale Pi= 3.1416 r = distance between observation point and center of the radiator in cm Pd is the limit of MPE, 1mW/cem?. If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. FCC ID: Q9DAPINO504505 Page Number: 6 of 9

MW’ Report No.: 1906TWO102—US5 2.2. Test Result of RF Exposure Evaluation Product ACCESS POINT Test Item RF Exposure Evaluation Antenna Gain: Refer to clause 1.2. Maximum EIRP for each model Test Mode Frequency Band Max Conducted Antenna Gain Max EIRP (MHz) Power (dBi) (dBm) (dBm) APINO504 BLE 2402 ~ 2480 8.00 3.3 11.30 ZigBee 2405 ~ 2480 8.00 3.3 11.30 802.11b/g/n/ax 2412 ~ 2462 22.00 2.0 24.00 802. am/aciax 218075249 22.00 2.0 24.00 5745 ~ 5825 APINO505 BLE 2402 ~ 2480 8.00 3.3 11.30 ZigBee 2405 ~ 2480 8.00 3.3 11.30 802.11b/g/n/ax 2412 ~ 2462 22.00 4.29 26.29 802.11a/n/ac/ax 2180 ~ 5240 22.00 5.63 27.63 5745 ~ 5825 Note: Turn—up power from operation description was taken into account for above max conducted power. FCC ID: Q9DAPINO504505 Page Number: 7 of 9

WR I‘ Report No.: 1906TWO102—U5 APINO504 BLE 2402 ~ 2480 11.30 0.0027 1 ZigBee 2405 ~ 2480 11.30 0.0027 1 802.11b/g/n/ax 2412 ~ 2462 24.00 0.0500 1 5180 ~ 5240 802.11a/n/ac/ax 24.00 0.0500 1 5745 ~ 5825 CONCLUSION: Both of the WLAN 2.4GHz Band, WLAN 5GHz Band, BLE or ZigBee Band can transmit simultaneously. So the simultaneous combined power density ratio at R (20 cm) = 0.0027 / 1 + 0.0500 / 1 + 0.0500 / 1 = 01027 <1. Therefore, the Min Safety Distance is 20cm. APINO505 BLE 2402 ~ 2480 11.30 0.0027 1 ZigBee 2405 ~ 2480 11.30 0.0027 1 802.11b/g/n/ax 2412 ~ 2462 26.29 0.0847 1 5180 ~ 5240 802.11a/n/ac/ax 27.63 0.1153 1 5745 ~ 5825 CONCLUSION: Both of the WLAN 2.4GHz Band, WLAN 5GHz Band, BLE or ZigBee band can transmit simultaneously. So the simultaneous combined power density ratio at R (20 cm) = 0.0027 / 1 + 0.0847 / 1 + 0.1153 / 1= 0.2027 < 1. Therefore, the Min Safety Distance is 20cm. The End FCC ID: Q9DAPINO504505 Page Number: 8 of 9

WR I ‘ Report No.: 1906TWO102—U5 Appendix A — EUT Photograph Refer to "1906TWO102—UE" file. FCC ID: Q9DAPINO504505 Page Number: 9 of 9


Document Created: 2019-10-24 15:06:50
Document Modified: 2019-10-24 15:06:50
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC