User Manuel

FCC ID: Q9DAPIN0304305

Users Manual

Download: PDF
FCCID_3146942

DATA SHEET ARUBA 300 SERIES ACCESS POINTS Entry-level 802.11ac Wave 2 Access Points The entry-level Aruba 300 Series Wave 2 access points deliver high performance and superb user experience for medium density environments. Featuring 3x3:3SS MU-MIMO capability, Aruba advanced ClientMatch radio management, and integrated Aruba Beacons, the 300 Series enables an all wireless digital work environment in a cost- efective manner. mobility context to develop applications that will deliver an With a maximum concurrent data rate of 1,300 Mbps in enhanced user experience and increase the value of the the 5GHz band and 400 Mbps in the 2.4GHz band (for an wireless network for organizations. aggregate peak data rate of 1.7Gbps), the entry-level 300 Series brings an always-on wireless network experience with UNIQUE BENEFITS the performance required for enterprises. It is ideal for cost- • Dual Radio 802.11ac Access Point with Multi-User MIMO sensitive medium density environments across verticals. - Supports up to 1,300 Mbps in the 5GHz band (with The high performance 802.11ac 300 Series supports multi- 3SS/VHT80 clients) and up to 400 Mbps in the 2.4GHz user MIMO (MU-MIMO) and 3 spatial streams (3SS). It band (with 2SS/VHT40 clients). provides simultaneous data transmission to multiple devices • Built-in Bluetooth Low-Energy (BLE) radio (up to two), maximizing data throughput and improving - Enables location-based services with BLE-enabled network eiciency. mobile devices receiving signals from multiple Aruba Beacons at the same time. The 300 Series includes the enhanced ClientMatch - Enables management of your deployment of battery- technology that extends the client steering technology powered Aruba Beacons. with MU-MIMO client awareness. It automatically identiies • Advanced Cellular Coexistence (ACC) MU-MIMO capable mobile devices and steers those devices - Minimizes interference from 3G/4G cellular networks, to the closest MU-MIMO capable Aruba access point. By distributed antenna systems and commercial small grouping MU-MIMO capable mobile devices together, cell/femtocell equipment. Quality of service for uniied the network starts taking advantage of the simultaneous communication apps. transmission to these devices, increasing its overall capacity. • Quality of service for Uniied Communication apps These dynamic roaming policies that are based on device - Supports priority handling and policy enforcement for types, help customers achieve the best WLAN performance uniied communication apps, including Microsoft Skype in a mixed device environment during the technology for Business with encrypted videoconferencing, voice, transition period. chat and desktop sharing. The 300 Series also has an integrated Bluetooth Aruba Beacon • RF Management that simpliies the remote management of a network of large- - Adaptive Radio Management (ARM) technology automatically scale battery-powered Aruba Beacons while also providing assigns channel and power settings, provides airtime advanced location and indoor wayinding, and proximity-based fairness, and ensures that APs stay clear of all sources of RF push notiication capabilities. It enables businesses to leverage interference to deliver reliable, high-performance WLANs.

DATA SHEET ARUBA 300 SERIES ACCESS POINTS - The Aruba 300 Series APs can be conigured to provide • Remote AP (RAP) for branch deployments. part-time or dedicated air monitoring for spectrum analysis • Air monitor (AM) for wireless IDS, rogue detection and wireless intrusion protection, VPN tunnels to extend and containment. remote locations to corporate resources, and wireless mesh • Spectrum analyzer, dedicated or hybrid, for identifying connections where Ethernet drops are not available. sources of RF interference. • Intelligent app visibility and control • Secure enterprise mesh. - AppRF technology leverages deep packet inspection to For large installations across multiple sites, the Aruba Activate classify and block, prioritize or limit bandwidth for over service signiicantly reduces deployment time by automating 2,500 enterprise apps or groups of apps. device provisioning, irmware upgrades, and inventory • Security management. With Aruba Activate, Instant APs are factory- - Integrated wireless intrusion protection ofers threat shipped to any site and conigure themselves when powered up. protection and mitigation, and eliminates the need for separate RF sensors and security appliances. AP-300 SERIES SPECIFICATIONS - IP reputation and security services identify, classify, • AP-304 (controller-managed) and IAP-304 (Instant): and block malicious iles, URLs and IPs, providing - 802.11ac – 5GHz 3x3 MIMO (1,300 Mbps max rate) and comprehensive protection against advanced online threats. 2.4GHz 2x2 MIMO (400 Mbps max rate) radios, with - Integrated Trusted Platform Module (TPM) for secure a total of three dual-band RP-SMA connectors for storage of credentials and keys. external antennas • Intelligent Power Monitoring (IPM): • AP-305 (controller-managed) and IAP-305 (Instant): - Enables the AP to continuously monitor and report - 802.11ac – 5GHz 3x3 MIMO (1,300 Mbps max rate) and its actual power consumption and optionally make 2.4GHz 2x2 MIMO (400 Mbps max rate) radios, with a autonomous decisions to disable certain capabilities. total of three integrated omni-directional downtilt dual- - For the 300 Series APs, the IPM power-save feature applies band antennas when the unit is powered by an 802.3af PoE source. By default, the USB interface will be the irst feature to turn WI-FI RADIO SPECIFICATIONS of if AP power consumption exceeds the available power • AP type: Indoor, dual radio, 5GHz 802.11ac 3x3 MIMO and budget. In rare cases it may be necessary to take additional 2.4GHz 802.11n 2x2 MIMO power saving measures, but in most cases, the 300 Series • Software-conigurable dual radio supports 5GHz (Radio 0) APs will operate in unrestricted mode. and 2.4GHz (Radio 1) • 5GHz: Three spatial stream Single User (SU) MIMO for up CHOOSE YOUR OPERATING MODE to 1,300 Mbps wireless data rate to individual 3x3 VHT80 Aruba 300 Series APs ofer a choice of operating modes to client devices meet your unique management and deployment requirements. • 5GHz: Two spatial stream Multi User (MU) MIMO for up • Controller-managed mode – When managed by to 867 Mbps wireless data rate to up to two (1x1 VHT80) Aruba Mobility Controllers, Aruba 300 Series APs MU-MIMO capable client devices simultaneously ofer centralized coniguration, data encryption, policy • 2.4GHz: Two spatial stream Single User (SU) MIMO for up enforcement and network services, as well as distributed to 400 Mbps wireless data rate to individual 2x2 VHT40 and centralized traic forwarding. client devices (300 Mbps for HT40 802.11n client devices) • Aruba Instant mode – In Aruba Instant mode, a single • Support for up to 255 associated client devices per radio, AP automatically distributes the network coniguration and up to 16 BSSIDs per radio to other Instant APs in the WLAN. Simply power-up one • Supported frequency bands (country-speciic Instant AP, conigure it over the air, and plug in the other restrictions apply): APs – the entire process takes about ive minutes. If WLAN - 2.400 to 2.4835GHz requirements change, a built-in migration path allows - 5.150 to 5.250GHz 300 Series Instant APs to become part of a WLAN that is - 5.250 to 5.350GHz managed by a Mobility Controller. - 5.470 to 5.725GHz - 5.725 to 5.850GHz

DATA SHEET ARUBA 300 SERIES ACCESS POINTS • Available channels: Dependent on conigured WI-FI ANTENNAS regulatory domain • AP-304/IAP-304: Three RP-SMA connectors for external • Dynamic frequency selection (DFS) optimizes the use of dual band antennas. Worst-case internal loss between available RF spectrum radio interface and external antenna connectors (due to • Supported radio technologies: diplexing circuitry): 0.8dB in 2.4GHz and 1.6dB in 5GHz. - 802.11b: Direct-sequence spread-spectrum (DSSS) • AP-305/IAP-305: Three integrated dual-band downtilt - 802.11a/g/n/ac: Orthogonal frequency-division omni-directional antennas for 3x3 MIMO with maximum multiplexing (OFDM) antenna gain of 3.9dBi in 2.4GHz and 5.4dBi in 5GHz. • Supported modulation types: Built-in antennas are optimized for horizontal ceiling - 802.11b: BPSK, QPSK, CCK mounted orientation of the AP. The downtilt angle for - 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM maximum gain is roughly 30 degrees. • Transmit power: Conigurable in increments of 0.5 dBm - The maximum gain of the combined (summed) antenna • Maximum (conducted) transmit power (limited by local patterns for all elements operating in the same band is regulatory requirements): 5.4dBi in 2.4GHz and 7.6dBi in 5GHz. - 2.4GHz band: +18 dBm per chain, +21 dBm aggregate (2x2) OTHER INTERFACES - 5GHz band: +18 dBm per chain, +23 dBm • One 10/100/1000BASE-T Ethernet network interface (RJ-45) aggregate (3x3) - Auto-sensing link speed and MDI/MDX - Note: conducted transmit power levels exclude antenna - 802.3az Energy Eicient Ethernet (EEE) gain. For total (EIRP) transmit power, add antenna gain • USB 2.0 host interface (Type A connector) • Advanced Cellular Coexistence (ACC) minimizes • Bluetooth Low Energy (BLE) radio interference from cellular networks - Up to 3dBm transmit power (class 2) and -92dBm • Maximum ratio combining (MRC) for improved receive sensitivity receiver performance - Integrated antenna with roughly 30 degrees downtilt • Cyclic delay/shift diversity (CDD/CSD) for improved and peak gain of 2.3dBi (AP-304/IAP-304) or 3.4dBi downlink RF performance (AP-305/IAP-305) • Short guard interval for 20MHz, 40MHz and • Visual indicators (multi-color LEDs): for System and 80MHz channels Radio status • Space-time block coding (STBC) for increased range and • Reset button: factory reset (during device power up) improved reception • Serial console interface (proprietary; optional adapter • Low-density parity check (LDPC) for high-eiciency error cable available) correction and increased throughput • Kensington security slot • Transmit beam-forming (TxBF) for increased signal reliability and range POWER SOURCES AND CONSUMPTION • Supported data rates (Mbps): • The AP supports direct DC power and Power over - 802.11b: 1, 2, 5.5, 11 Ethernet (PoE) - 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 • When both power sources are available, DC power takes - 802.11n (2.4GHz): 6.5 to 300 (MCS0 to MCS15) priority over PoE - 802.11n (5GHz): 6.5 to 450 (MCS0 to MCS23) • Power sources are sold separately - 802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS = 1 to 3 for • Direct DC source: 12Vdc nominal, +/- 5% VHT20/40/80 - Interface accepts 2.1/5.5-mm center-positive circular • 802.11n high-throughput (HT) support: HT 20/40 plug with 9.5-mm length • 802.11ac very high throughput (VHT) support: • Power over Ethernet (PoE): 48 Vdc (nominal) VHT 20/40/80 802.3af/802.3at compliant source • 802.11n/ac packet aggregation: A-MPDU, A-MSDU - Unrestricted functionality with 802.3at PoE

DATA SHEET ARUBA 300 SERIES ACCESS POINTS - When using IPM, the AP may enter power-save mode RELIABILITY with reduced functionality when powered by an 802.3af MTBF: 1,116,000hrs (127yrs) at +25C operating temperature PoE source (see details on Intelligent Power Monitoring elsewhere in this datasheet) REGULATORY MODEL NUMBERS - Without IPM, the USB port is disabled when the AP is • AP-304 and IAP-304: APIN0304 powered by and 802.3af PoE source • AP-305 and IAP-305: APIN0305 • Maximum (worst-case) power consumption: 13W (PoE) or 11W (DC) CERTIFICATIONS - Excludes power consumed by external USB device (and • CB Scheme Safety, cTUVus internal overhead); this could add up to 6.5W (PoE) or • UL2043 plenum rating 5.5W (DC) for a 5W/1A USB device • Wi-Fi Alliance (WFA) certiied 802.11a/b/g/n/ac • Maximum (worst-case) power consumption in idle mode: WARRANTY 3.7W (PoE) or 2.6W (DC) • Aruba limited lifetime warranty MOUNTING MINIMUM OPERATING SYSTEM • The AP ships with two (white) mounting clips to attach to a SOFTWARE VERSIONS 9/16-inch or 15/16-inch lat T-bar drop-tile ceiling • ArubaOS 6.5.1.0 • Several optional mount kits are available to attach the • Aruba InstantOS 4.3.1.0 AP to a variety of surfaces; see the Ordering Information section below for details MECHANICAL • Dimensions/weight (unit, excluding mount accessories): - 165mm x 165mm x 38mm - 460g • Dimensions/weight (shipping): - 205mm x 205mm x 52mm - 620g ENVIRONMENTAL • Operating: - Temperature: 0° C to +50° C (+32° F to +122° F) - Humidity: 5% to 95% non-condensing • Storage and transportation: - Temperature: -40° C to +70° C (-40° F to +158° F) REGULATORY • FCC/Industry of Canada • CE Marked • R&TTE Directive 1995/5/EC • Low Voltage Directive 72/23/EEC • EN 300 328 • EN 301 489 • EN 301 893 • UL/IEC/EN 60950 • EN 60601-1-1, EN60601-1-2 For more country-speciic regulatory information and approvals, please see your Aruba representative.

DATA SHEET ARUBA 300 SERIES ACCESS POINTS RF PERFORMANCE TABLE Maximum transmit power (dBm) Receiver sensitivity (dBm) per transmit chain per receive chain 802.11b 2.4GHz 1 Mbps 18.0 -95.0 11 Mbps 18.0 -88.0 802.11g 2.4GHz 6 Mbps 18.0 -92.0 54 Mbps 18.0 -74.0 802.11n HT20 2.4GHz MCS0/8 18.0 -91.0 MCS7/15 18.0 -71.0 802.11n HT40 2.4GHz MCS0/8 18.0 -88.0 MCS7/15 18.0 -68.0 802.11a 5GHz 6 Mbps 18.0 -92.0 54 Mbps 18.0 -74.0 802.11n HT20 5GHz MCS0/8/16 18.0 -91.0 MCS7/15/23 18.0 -71.0 802.11n HT40 5GHz MCS0/8/16 18.0 -88.0 MCS7/15/23 17.0 -68.0 802.11ac VHT20 5GHz (SU-MIMO) MCS0 18.0 -91.0 MCS8 18.0 -67.0 802.11ac VHT40 5GHz (SU-MIMO) MCS0 18.0 -88.0 MCS9 17.0 -63.0 802.11ac VHT80 5GHz (SU-MIMO) MCS0 18.0 -85.0 MCS9 17.0 -58.0 Maximum capability of the hardware provided (excluding antenna gain). Maximum transmit power is limited by local regulatory settings.

DATA SHEET ARUBA 300 SERIES ACCESS POINTS ORDERING INFORMATION Part Number Description AP-300 Series Access Points AP-304 Aruba AP-304 802.11n/ac 2x2:2/3x3:3 MU-MIMO Dual Radio Antenna Connectors AP AP-305 Aruba AP-304 FIPS/TAA-compliant 802.11n/ac Dual 2x2:2/3x3:3 MU-MIMO Dual Radio Antenna Connectors AP Mounting Spares AP-220-MNT-C1 Indoor Access Point suspended ceiling rail mount kit (for lat rails only, black). Spare for the clips provided with the AP. Mounting Accessories AP-220-MNT-C2 Indoor Access Point suspended ceiling rail mount kit (for Interlude and Silhouette rail styles only, black). Alternate to standard clips provided with AP. AP-MNT-CM1 Indoor Access Point suspended ceiling rail mount kit (industrial grade, metal). Fits most rail types AP-220-MNT-W1 Indoor Access Point lat-surface mount kit (basic, black) AP-220-MNT-W1W Indoor Access Point lat-surface mount kit (basic, white). Mechanically identical to AP-220-MNT-W1 AP-220-MNT-W3 Indoor Access Point lat surface mount kit (box style, secure, low-proile, large). Color: white Other Accessories AP-305-CVR-20 Kit of 20 snap-on covers for AP-305. Plain white, non-glossy, with holes for LED indicators. Color: white Generic Indoor AP Accessories AP-AC-12V30B 12V/30W AC-to-DC Desktop Style Power Adapter with Type B DC plug (2.1/5.5/9.5mm circular, 90-degree angled). Note: does not include country speciic AC power cord (PC-AC-xx). PD-3501G-AC 15.4W 802.3af PoE midspan injector, 10/100/1000BASE-T Ethernet. Note: does not include country speciic AC power cord (PC-AC-xx) PD-9001GR-AC 30W 802.3at PoE midspan injector, 10/100/1000BASE-T Ethernet. Note: does not include country speciic AC power cord (PC-AC-xx) Antennas See info on Aruba website for antenna part numbers 1344 CROSSMAN AVE | SUNNYVALE, CA 94089 1.844.473.2782 | T: 1.408.227.4500 | FAX: 1.408.227.4550 | INFO@ARUBANETWORKS.COM www.arubanetworks.com DS_AP300Series_081516


Document Created: 2017-12-15 05:04:16
Document Modified: 2017-12-15 05:04:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC