RF Exposure-2

FCC ID: Q9DAPIN0224225

RF Exposure Info

Download: PDF
FCCID_3013220

Company: Aruba Networks, Inc. Test of: APIN0224, APIN0225 To: FCC CFR 47 Part 15 Subpart E 15.407 Report No.: ARUB206-3_MPE Rev A MPE TEST REPORT

MPE TEST REPORT FROM Test of: Aruba Networks, Inc. APIN0224, APIN0225 to To: FCC CFR 47 Part 15 Subpart E 15.407 Test Report Serial No.: ARUB206-3_MPE Rev A This report supersedes: NONE Applicant: Aruba Networks, Inc. 1344 Crossman Ave. Sunnyvale, California 94089 USA Product Function: Wireless Access Point Issue Date: 3rd May 2016 This Test Report is Issued Under the Authority of: MiCOM Labs, Inc. 575 Boulder Court Pleasanton California 94566 USA Phone: +1 (925) 462-0304 Fax: +1 (925) 462-0306 www.micomlabs.com MiCOM Labs is an ISO 17025 Accredited Testing Laboratory

Title: Aruba Networks, Inc. APIN0224, APIN0225 To: FCC CFR 47 Part 15 Subpart E 15.407 Serial #: ARUB206-3_MPE Rev A Issue Date: 3rd May 2016 Page: 3 of 5 1. MAXIMUM PERMISSABLE EXPOSURE Calculations for Maximum Permissible Exposure Levels Power Density = Pd (mW/cm2) = EIRP/(4*π*d2) EIRP = P * G P = Peak output power (mW) G = Antenna numeric gain (numeric) d = Separation distance (cm) Numeric Gain = 10 ^ (G (dBi)/10) Because the EUT belongs to the General Population/Uncontrolled Exposure the limit of power density is 1.0 mW/cm2 The calculations in the table below use the highest conducted power values together with the lowest antenna gain specified for the EUT. These calculations represent worst case in terms of the exposure levels. Calculated Peak Peak Calculated Minimum Ant Numeric Safe Freq. Band Output Output Power Separation Gain Gain Distance (MHz) Power Power Density @ Distance (dBi) (numeric) @ (dBm) (mW) 20cm (cm) 1mW/cm2 2400 – 2483.5 7.5 5.62 28.50 708.0 17.80 0.79 20.00 5150.0 - 5250.0 3.30 2.14 27.73 593.55 10.05 0.25 20.00 5725.0 - 5850.0 3.30 2.14 27.95 624.40 10.31 0.27 20.00 Note: for mobile or fixed location transmitters the minimum separation distance is 20cm, even if calculations indicate the MPE distance to be less. Assessment for simultaneous operation in 2.4 GHz and 5 GHz bands The Aruba APIN0224, APIN0225 has two radio modules and can transmit simultaneously in the 2.4 GHz and 5 GHz bands. The following assessment is based on simultaneous operation in the 2.4 GHz and 5 GHz bands. Peak Peak Calculated Safe Minimum Antenna Numeric Freq. Band Output Output Distance @ Separation Gain Gain (MHz) Power Power 1mW/cm2 Distance (dBi) (numeric) (dBm) (mW) Limit(cm) (cm) 2400 – 2483.5 7.5 5.62 28.50 708.0 17.80 20.00 5725.0 - 5850.0 3.30 2.14 27.95 624.40 10.31 20.00 Combined EIRP Total 5315.2 mW/EIRP 20.57 20.57 This test report may be reproduced in full only. The document may only be updated by MiCOM Labs personnel. All changes will be noted in the Document History section of the report. MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566 USA, Phone: +1 (925) 462 0304, Fax: +1 (925) 462 0306, www.micomlabs.com

Title: Aruba Networks, Inc. APIN0224, APIN0225 To: FCC CFR 47 Part 15 Subpart E 15.407 Serial #: ARUB206-3_MPE Rev A Issue Date: 3rd May 2016 Page: 4 of 5 Specification Maximum Permissible Exposure Limits FCC §1.1310 Limit = 1mW / cm2 from 1.310 Table 1 RSS-Gen §3.2 In addition to RSS-Gen, the requirements in Radio Standards Specification RSS-102 shall be met. This test report may be reproduced in full only. The document may only be updated by MiCOM Labs personnel. All changes will be noted in the Document History section of the report. MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566 USA, Phone: +1 (925) 462 0304, Fax: +1 (925) 462 0306, www.micomlabs.com

575 Boulder Court Pleasanton, California 94566, USA Tel: +1 (925) 462 0304 Fax: +1 (925) 462 0306 www.micomlabs.com


Document Created: 2017-12-07 00:28:05
Document Modified: 2017-12-07 00:28:05
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC