RF Exposure

FCC ID: Q92-BHC1801

RF Exposure Info

Download: PDF

FCCID_4055011

Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RSHA180712001-00A

FCC §1.1310& §2.1091 –MAXIMUM PERMISSIBLE EXPOSURE (MPE)
Applicable Standard

According to subpart 15.247(i) and subpart §1.1310, systems operating under the provisions of this section
shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in
excess of the Commission’s guidelines.

Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091)

(B) Limits for General Population/Uncontrolled Exposure
Frequency Range Electric Field Magnetic Field Power Density Averaging Time
(MHz) Strength (V/m) Strength (A/m) (mW/cm2) (minutes)
0.3-1.34 614 1.63 *(100) 30
1.34-30 824/f 2.19/f *(180/f²) 30
30-300 27.5 0.073 0.2 30
300-1500 / / f/1500 30
1500-100,000 / / 1.0 30

f = frequency in MHz; * = Plane-wave equivalent power density;

According to §1.1310 and §2.1091 RF exposure is calculated.

Calculated Formulary:

Predication of MPE limit at a given distance
S = PG/4πR² = power density (in appropriate units, e.g. mW/cm2);
P = power input to the antenna (in appropriate units, e.g., mW);
G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain
factor, is normally numeric gain;
R = distance to the center of radiation of the antenna (appropriate units, e.g., cm);

Calculated Data:

Frequency Tune-up Evaluation Power
Antenna Gain MPE Limit
Mode Range Conducted Power Distance Density
(mW/cm2)
(MHz) (dBi) (numeric) (dBm) (mW) (cm) (mW/cm2)

Wi-Fi 2412~2462 1.00 1.26 16.00 39.81 20.00 0.01 1.00

Result: The device meet FCC MPE at 20 cm distance.

FCC Part 15.247 Page 13 of 59

Document Created: 2018-10-31 14:34:04
Document Modified: 2018-10-31 14:34:04

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC