15_BT228 UserMan

FCC ID: Q8WBT228

Users Manual

Download: PDF
FCCID_4058894

尺 寸: 70 x10 0 mm , 材 质：10 0g书 纸，1C + 1C，风琴 折 页 Accessories: Buttons: Indoor:Green LED long light/Outdoor: Operation Play/ Pause USB Mode Insert USB to USB mode Green LED slow Flash (every 1 second) ⊙ User manual x1 TWS/ Single using Volume- Items Instructions LED States TWS Pairing Double press " " Blue and Green LED Alternately flash ⊙ Type-C cable (For Charging) x1 Volume+ Long press " " for 2-3 seconds Power Power On Blue LED On ⊙ 3.5mm AUX cable x1 Main device blue LED slow flash, under Power off situation BT228 Sound effect TWS Successful Pairing / auxiliary device blue LED long light Long press " " for 2-3 seconds State indicator light Disconnect TWS Press + - together Blue LED fast flash Power Off under Power on situation LED Off Specifications Battery indicator light ⊙ Bluetooth version: BT4.2 Outdoor Speaker Indoor: State indicator light long light Pairing Auto to Enter Pairing Mode Blue LED Flash(every 2 seconds) Sound effect switch Short press " " Sound effect button MIC Outdoor: State indicator light flash Indoor: Blue LED long light/Outdoor: Successful Pairing Select Bluetooth Name on your Phone User Manual Volume Up Short press + / Green LED slow flash Short press - Disconnect Bluetooth Press "+""-" together Blue LED flash (every 2 seconds) ⊙ speaker unit：Diameter 70 mm outside mangnet ,4ohm, 20W*2 Strap Volume Down / Diameter 30 mm inner mangnet ,8ohm, 10W*2 Left Right Next Song Long press + Will connect automatically with the Indoor:Blue LED long light/Outdoor: / Reconnect last connected device Green LED slow Flash (every 1 second) Previous Song Long press - / ⊙ SNR: ≥75DB Short press " " when incoming call Receive the Call / Pause/Play/Mute Short Press " " （Mute in AXU mode） / （Under TWS, only the Main device have voice） ⊙ Working time: 6-8 hours TWS Long press " " when incoming call Low Battery Alarm Battery Voltage lower than 6.5V / Reject the Call / ⊙ Charging voltage/current : TYPE C DC/2000MA 1.Turn on two devices, Blue LED flash. （Under TWS, only the Main device have voice Low Battery Shutdown Battery Voltage lower than 6.2V / 2.Select one of the devices and double press the Power button, and then they will pair each other. Short press " " when you are on call ⊙ Support USB Flash Drive, Music format: MP3,WAV,WMA,APE,FLAG Charging Red LED Long Light Hang up the Call / (The main device:Blue and Green LED Alternately flash ) Insert 5V USB （Under TWS, only the Main device have voice） ⊙ Transmission: 10M (Vary from environment and devices) 3.After successfully pairing, Main device blue LED slow flash, auxiliary device blue LED long light. Charging Finished Auto completed Red LED Off Long press " " 4.In your phone, search BT228 and connect, after successfully connecting, the two devices can play TYPE-C charging Call back （Under TWS, only the Main device can talk） Blue LED long light ⊙ Battery voltage :7.4V Use the toothpick or other insulator Reset LED off music together. AUX/ Reset insert AUX hole Mode Switch Short press " " / ⊙ Battery : 2500mAh 5.Disconnect TWS, press + - buttons together, the Blue LED fast flash (every 2 seconds) means it has been disconnected. USB Note: The volume and mode have memory function. When Power on, the speaker will continue the AUX Mode Insert AUX to AXU Mode Indoor:Green LED long light/Outdoor: ⊙ Charging time: 4-6hours volume and mode of the last Power off. And every time the sound effect is indoor effect. Green LED slow Flash (every 1 second) ⊙ THD: ≤10% ⊙ Product size: 319.5*118*119.5mm NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.


Document Created: 2018-08-08 11:25:34
Document Modified: 2018-08-08 11:25:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC