15_BT223DS-N UserMan

FCC ID: Q8W-BT223DS-N

Users Manual

Download: PDF
FCCID_4132549

Flash Blue & Green Volume Down Volume Down Power-on/off LED Press and Hold Screw hole for Volume Down Press and Hold mounting bike Play/Pause/Mute Aux-In (Aux-in mode) Micro SD port Volume UP USB Changing Port Bluetooth Speaker Press “ ”，“ ” buttons simultaneously until hear a tone and LED Indicator fast blinking blue to disconnect BT223 the into connected device,current and go new Bluetooth-paring mode. BT223DS-N accordance with the instructions, TWS Function may cause harmful interference to radio communica- It supports True Wireless Stereo for connecting two • Bluetooth Version: 4.2 tions. However, there is no speakers via Bluetooth. • Suport:A2DPV1.2,AVRCPV1.4,HPV1.6,HSPV1.2 guarantee that interference will not occur in a particular Turn ON two speakers, double press the on one of • Wireless work distance:10meters installation. If this the speakers for 2 seconds until the LED flashes blue & • Rated Power: 2 x 5W equipment does cause harmful interference to radio or green. The speaker now is in a stereo pairing mode. After • Driver Unit: 2 xφ40mm (4Ω,6W) television reception, which 3-5 seconds, the speakers will be successfully paired to • Frequency response: 180Hz-18kHz can be determined by turning the equipment off and on, True Wireless Stereo mode. The main speaker LED • Signal-to-noise ratio: >80dB the user is encouraged to flashes blue while the sub-speaker LED is ON blue. • Battery type: Lithium-ion (3.7V/2000mAh) try to correct the interference by one or more of the Note: In TWS mode, the calls can be answered only • DC input voltage/current: 5V/1A following measures: through the main speaker. • Playtime: 6-8 hours (varies by volume level and content) - Reorient or relocate the receiving antenna. Reset • Battery charge time: 3-4 hours - Increase the separation between the equipment and long press the power button for 15 seconds if the • Dimensions: 158.5 x 65 x62.5 mm receiver. speaker malfunctions. The speaker must be • Weight: 355g -Connect the equipment into an outlet on a circuit semi-charged in order to reset, so make sure it has different from that to which the battery left. receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance NOTE: This equipment has been tested and found to could void the user's authority to operate the equipment. comply with the limits for a This device complies with Part 15 of the FCC Rules. Class B digital device, pursuant to part 15 of the FCC Operation is subject to the following two conditions: Rules. These limits are (1) this device may not cause harmful interference, and designed to provide reasonable protection against (2) this device must accept any interference received, harmful interference in a including interference that may residential installation. This equipment generates uses cause undesired operation. and can radiate radio frequency energy and, if not installed and used in


Document Created: 2018-08-21 09:07:05
Document Modified: 2018-08-21 09:07:05
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC