User Manual

FCC ID: Q87-X2000V2

Users Manual

Download: PDF
FCCID_1498011

USER GUIDE Wireless ADSL2+ Modem Router Wireless ADSL2+ Modem Router Wireless-N Router with ADSL2+ Modem Model：X2000 v2 Model: X2000

About This Guide About This Guide Copyright and Trademarks Linksys, Cisco and the Cisco Logo Icon Descriptions are registered trademarks or trademarks of Cisco Systems, Inc. While reading through the User Guide you may see and/or its affiliates in the U.S. and certain various icons that call attention to specific items. Below is other countries. Other brands and product a description of these icons: names are trademarks or registered trademarks of their respective holders. NOTE: This check mark indicates that there is Copyright © 2009 Cisco Systems, Inc. All a note of interest and is something that you rights reserved. should pay special attention to while using the product. WARNING: This exclamation point indicates that there is a caution or warning of potential risk of bodily injury and/or it is something that could damage your property or product. WEB: This globe icon indicates a noteworthy website address or e-mail address. Online Resources Website addresses in this document are listed without http:// in front of the address because most current web browsers do not require it. If you use an older web browser, you may have to add http:// in front of the web address. Resource Website Linksys www.linksysbycisco.com Linksys www.linksysbycisco.com/international International Glossary www.linksysbycisco.com/glossary Network www.linksysbycisco.com/security Security Web Technical www.linksysbycisco.com/support Support Wireless ADSL2+ Modem Router i

Table of Contents Chapter 1: Product Overview 1 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Placement Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Chapter 2: Wireless Security Checklist 3 General Network Security Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Additional Security Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Chapter 3: Advanced Configuration 4 How to Access the Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Using the Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 List of Screens in the Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Setup Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Wireless Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Security Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Access Restrictions Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Applications & Gaming Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Administration Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Status Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Appendix B: Specifications 8 X2000 v2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 X2000 Appendix A: Troubleshooting 10 Appendix C: Regulatory Information 11 European Union . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Australia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 New Zealand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 United States of America . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Wireless ADSL2+ Modem Router ii

Chapter 1 Product Overview Chapter 1: DSL (Green) The DSL LED lights up whenever there is a successful DSL connection. The LED Product Overview flashes green while the Modem Router is establishing the ADSL connection. Thank you for choosing the Wireless ADSL2+ Modem Internet (Green/Red) The Internet LED lights up Router. This device lets you access the Internet via a green and stays on when a connection is made wireless connection or through one of its four switched through the Internet port. It flashes to indicate ports. You can also use it to share resources such as network activity over the Internet port. The LED computers, printers and files. A variety of security features, is lit red when an authentication error occurs. such as WPA2™ security, a Stateful Packet Inspection (SPI) firewall and NAT technology, help to protect your data Back Panel and your privacy while online. Configuration is easy using the provided browser-based utility. DSL The DSL port connects to the ADSL line. Front Panel Ethernet 3, 2, 1 The Ethernet ports (3, 2, 1) connect the Modem Router to wired computers Power The Power LED is continuously lit green and other Ethernet network devices. while the device is powered on. The LED is lit amber if a POST (Power On Self Test) failure or NOTE: The Ethernet 1 port can device malfunction occurs. also be configured as the WAN Ethernet 1-3 (Green) These numbered LEDs, port. To do this, access the Web- one for each of the numbered ports on the based utility (refer to “Chapter 3: Modem Router’s back panel, serve two purposes. Advanced Configuration” on page 4), If the LED is continuously lit, the Modem Router is then select the Setup > Ethernet tab. successfully connected to a device through that port. It flashes to indicate network activity over that port. NOTE: The Ethernet 1 LED is lit amber Reset There are two ways to reset the Modem when the WAN link is established on that Router’s factory defaults. Either press and port. hold the Reset button for approximately five seconds, or restore the defaults from the Wi-Fi Protected Setup™ Button Press this Administration > Factory Defaults screen of the button to have Wi-Fi Protected Setup™ search for Modem Router’s web-based utility. your Wi-Fi Protected Setup™-supported wireless device. The LED is continuously lit green when a Power The Power port is where you will connect Wi-Fi Protected Setup™ connection is successfully the power adapter. established. The LED blinks slowly while Wi-Fi On/Off Button Press the On/Off button to turn Protected Setup™ is setting up a connection, and power to the device on or off. is lit amber if an error occurs. The LED is off when Wi-Fi Protected Setup™ is idle. NOTE: Wi-Fi Protected Setup™ is a feature that makes it easy to configure your wireless network and its security settings. Wireless (Green) The Wireless LED lights up when the wireless feature is enabled. It flashes when the Modem Router is actively sending or receiving data over the network. Wireless ADSL2+ Modem Router 1

Chapter 1 Product Overview Placement Positions Follow these instructions: 1. Determine where you want to mount the device. Make There are two ways to physically install the device. The sure that the wall you use is smooth, flat, dry, and first way is to place the device horizontally on a surface. sturdy. Also make sure the location is within reach of The second way is to mount the device on a wall. an electrical outlet. The best place for the device is usually at the center of 2. Drill two holes into the wall. Make sure the holes are your wireless network, within range of all of your wireless 152 mm (6 inches) apart. devices. 3. Insert a screw into each hole and leave 3 mm Horizontal Placement (0,12 inches) of its head exposed. 4. Maneuver the device so the wall-mount slots line up The device has four rubber feet on its bottom panel. Place with the two screws. the device on a level surface near an electrical outlet. 5. Place the wall-mount slots over the screws and slide Wall-Mounting Placement the device down until the screws fit snugly into the wall-mount slots. The device has two wall-mount slots on its bottom panel. The distance between the slots is 152 mm (6 inches). Two screws are needed to mount the device. Suggested Mounting Hardware 2,5-3,0 mm 4-5 mm 1-1,5 mm ††Note: Mounting hardware illustrations are not true to scale. NOTE: Cisco is not responsible for damages incurred by insecure wall-mounting hardware. 152 mm Wall Mounting Template Wireless ADSL2+ Modem Router 2

Chapter 2 Wireless Security Checklist Chapter 2: 4. Enable encryption Wireless Security Checklist Encryption protects data transmitted over a wireless Wireless networks are convenient and easy to install, so network. Wi-Fi Protected Access™ (WPA™/WPA2™) and homes with high-speed Internet access are adopting them Wired Equivalency Privacy (WEP) offer different levels of at a rapid pace. Because wireless networking operates by security for wireless communication. sending information over radio waves, it can be more A network encrypted with WPA™/WPA2™ is more vulnerable to intruders than a traditional wired network. secure than a network encrypted with WEP, because Like signals from your cellular or cordless phones, signals WPA™/WPA2™ uses dynamic key encryption. To protect from your wireless network can also be intercepted. Since the information as it passes over the airwaves, you should you cannot physically prevent someone from connecting enable the highest level of encryption supported by your to your wireless network, you need to take some additional network equipment. steps to keep your network secure. WEP is an older encryption standard and may be the only option available on some older devices that do not 1. Change the default wireless support WPA™. network name or SSID General Network Security Guidelines Wireless devices have a default wireless network name or Service Set Identifier (SSID) set by the factory. This is Wireless network security is useless if the underlying the name of your wireless network, and can be up to 32 network is not secure. characters in length. Linksys by Cisco wireless products •• Password protect all computers on the network and use linksys as the default wireless network name. You individually password protect sensitive files. should change the wireless network name to something unique to distinguish your wireless network from other •• Change passwords on a regular basis. wireless networks that may exist around you, but do not •• Install anti-virus software and personal firewall use personal information (such as your Social Security software. number) because this information may be available for anyone to see when browsing for wireless networks. •• Disable file sharing (peer-to-peer). Some applications may open file sharing without your consent and/or knowledge. 2. Change the default password Additional Security Tips For wireless products such as access points, routers, and •• Keep wireless routers, access points, or modem routers modem routers, you will be asked for a password when away from exterior walls and windows. you want to change their settings. These devices have a default password set by the factory. The default password •• Turn wireless routers, access points, or modem routers is admin. Hackers know these defaults and may try to off when they are not being used (at night, during use them to access your wireless device and change your vacations). network settings. To thwart any unauthorized changes, •• Use strong passphrases that are at least eight characters customize the device’s password so it will be hard to in length. Combine letters and numbers to avoid using guess. standard words that can be found in the dictionary. 3. Enable MAC address filtering WEB: For more information on wireless security, visit www.linksysbycisco.com/security Linksys by Cisco routers and modem routers give you the ability to enable Media Access Control (MAC) address filtering. The MAC address is a unique series of numbers and letters assigned to every networking device. With MAC address filtering enabled, wireless network access is provided solely for wireless devices with specific MAC addresses. For example, you can specify the MAC address of each computer in your home so that only those computers can access your wireless network. Wireless ADSL2+ Modem Router 3

Chapter 3 Advanced Configuration Chapter 3: List of Screens in the Utility Advanced Configuration The screens are organized hierarchically as listed below. (Some screens may not apply to all models.) After you finish running the Setup Wizard on the Setup Setup Tab CD-ROM, the device is ready for use. To change the device’s Setup > Basic Setup advanced settings, access the Configuration Utility via a Setup > Ethernet web browser on a computer connected to the device. Setup > DDNS Setup > MAC Address Clone NOTE FOR USERS IN NEW ZEALAND: Refer to Setup > Advanced Routing the Note in Setup > Basic Setup, page 5 for setup instructions specific to your country. Wireless Tab Wireless > Basic Wireless Settings Wireless > Wireless Security How to Access the Utility Wireless > Wireless MAC Filter Launch the web browser on your computer, and enter the Wireless > Advanced Wireless Settings device’s default IP address, 192.168.1.1, in the Address field. Then, press Enter. Storage Tab (WAG320N Only) Storage > Disk Management A login screen appears. Use the default user name and Storage > Shared Folder password, admin, unless you changed them when you ran the Setup Wizard. (You can set a new user name and Storage > Administration password from the Administration tab’s Management Storage > Media Server screen.) Click OK to continue. Security Tab Security > Firewall Security > VPN Passthrough Access Restrictions Tab Access Restrictions > Internet Access Policy Applications & Gaming Tab Applications & Gaming > Single Port Forwarding Login Applications & Gaming > Port Range Forwarding If you are unable to log in, press the Reset button on the Applications & Gaming > Port Range Triggering back panel for at least 5 seconds, then wait for the device Applications & Gaming > DMZ to reset and try again. Applications & Gaming > QoS Administration Tab Using the Utility Administration > Management Immediately after login, the Basic Setup screen appears. Administration > Reporting Near the top of the screen is a bar with selectable tabs. Administration > Diagnostics Use these tabs to navigate within the Utility. The primary Administration > Back Up & Restore tabs indicate the Utility’s main configuration categories. Each primary tab has one or more secondary tabs that Administration > Factory Defaults provide access to the primary tab’s configuration screens. Administration > Firmware Upgrade Primary Tabs Administration > Language Setup Wireless Storage Security Access Applications & Administration Status Status Tab Restrictions Gaming Status > Modem Router Basic Setup Ethernet DDNS MAC Address Clone Advanced Routing Status > Local Network Secondary Tabs Status > Wireless Network Navigation Tabs Status > DSL Connection To access a screen, click the appropriate primary tab, then click the appropriate secondary tab. The screen will appear, with its primary and secondary tabs highlighted. Wireless ADSL2+ Modem Router 4

Chapter 3 Advanced Configuration Setup Tab Setup > Advanced Routing The Setup tab provides the device’s basic setup functions. The Advanced Routing screen allows you to configure the device’s advanced routing functions, such as operating For detailed information on the Setup tab, refer to the mode, dynamic mode, and static routing. Utility’s online help pages. Setup > Basic Setup Wireless Tab The Basic Setup screen allows you to change the device’s The Wireless tab allows you to configure the device’s general settings. The following connection types wireless functions. (encapsulations) are available: For detailed information on the Wireless tab, refer to the Utility’s online help pages. •• RFC 2364 PPPoA •• RFC 2516 PPPoE Wireless > Basic Wireless Settings •• RFC 2684 Routed •• IPoA The Basic Wireless Settings screen allows you to set up a network with Wi-Fi Protected Setup™, change the radio •• RFC 2684 Bridged - Dynamic IP Address band, select the network mode, change the wireless •• RFC 2684 Bridged - Static IP Address network name (SSID), change the wireless channel and •• Bridge Mode Only disable the SSID broadcast. Note to US model owner: To comply with US FCC NOTE FOR USERS IN NEW ZEALAND: To set up regulation, the country selection function has been the device, follow these instructions: completely removed from all US models. The above 1. Access the Setup > Basic Setup screen. function is for non-US models only. 2. Select RFC 2364 PPPoA from the Encapsulation drop-down menu. Wireless > Wireless Security 3. For the Virtual Circuit ID, enter 0 for the VPI The Wireless Security screen allows you to configure the and 100 for the VCI. security of your wireless network(s). It allows you to select 4. Select VC for Multiplexing. from a number of security modes, such as WPA2. 5. Select Multimode from the DSL Modulation drop-down menu. Wireless > Wireless MAC Filter 6. Enter your User Name and Password details The Wireless MAC Filter screen allows you to control (block from your ISP. or allow) Internet access by individual devices on your 7. Click Save Settings. wireless network by specifying their MAC addresses. Wireless > Advanced Wireless Settings Setup > Ethernet The Advanced Wireless Settings screen allows you to The Ethernet screen allows you to configure the device’s configure the device’s advanced wireless functions. Ethernet settings. It also allows you to set up the first Ethernet port as a WAN port. Security Tab Setup > DDNS The Security tab allows you to enhance the security of your network. The DDNS screen allows you to assign a fixed host and For detailed information on the Security tab, refer to the domain name to a network computer that has been Utility’s online help pages. assigned a dynamic Internet IP address. This is useful when you are hosting your own website, FTP server, or other server behind the device. Security > Firewall The Firewall screen allows you to configure a firewall that Setup > MAC Address Clone can filter out various types of unwanted traffic on the device’s local network. Some service providers require you to register a MAC address in order to access the Internet. The MAC Address Clone screen lets you use the MAC address of a device that has already been registered with your service provider, by copying that MAC address to the device. Wireless ADSL2+ Modem Router 5

Chapter 3 Advanced Configuration Security > VPN Passthrough Applications & Gaming > DMZ The VPN Passthrough screen allows you to configure the The DMZ screen allows you to expose one network user device’s VPN passthrough feature. This feature lets VPN to the Internet for use of a special-purpose service such tunnels using the IPSec, L2TP, or PPTP protocols to pass as Internet gaming or video conferencing. DMZ hosting through the device’s firewall. forwards all the ports at the same time to one computer. You should assign static IP addresses to the destination Access Restrictions Tab computers before you use this feature. The Access Restrictions tab allows you to configure Applications & Gaming > QoS the Internet access restrictions for each device in your network. The QoS screen allows you to specify priorities for different types of traffic. Lower priority traffic will be slowed down For detailed information on the Access Restrictions tab, to allow greater throughput or less delay for high priority refer to the Utility’s online help pages. traffic. Access Restrictions > Internet Access Policy Administration Tab The Internet Access Policy screen allows you to define The Administration tab allows you to configure the device’s policies that are used to block or allow specific kinds administrative functions. of Internet usage and traffic, such as Internet access, designated applications, websites, and inbound traffic For detailed information on the Administration tab, refer during specific days and times, and for a specified list of to the Utility’s online help pages. devices in your network. Administration > Management Applications & Gaming Tab The Management screen allows you to manage specific The Applications & Gaming tab allows you to configure functions for access and security. functions such as port forwarding and quality of service that may be necessary for special applications such as NOTE ON CISCO WEB ASSISTANT OPTION hosting web servers, ftp servers, and e-mail servers on on (not on all models): If you see an “error code your network, or other specialized internet applications 404” message (indicating that you entered an such as videoconferencing or online gaming. invalid web address), the Cisco Web Assistant will appear and automatically run a search For detailed information on the Applications & Gaming based on the keywords in the web address. This tab, refer to the Utility’s online help pages. feature can be enabled or disabled from this screen. Applications & Gaming > Single Port Forwarding The Single Port Forwarding screen allows you to set up port forwarding for a single port. You should assign static NOTE ON TREND MICRO OPTION (not on all IP addresses to the destination computers before you use models): Trend Micro ProtectLink Gateway this feature. is a hosted security service that stops spam and filters URLS to prevent unwanted content Applications & Gaming > Port Range Forwarding from passing through your router. The Email Protection is the hosted messaging security The Port Range Forwarding screen allows you to set up solution provided by Trend Micro InterScan port forwarding for a range of ports. You should assign Messaging Hosted Security (IMHS). This feature static IP addresses to the destination computers before can be enabled or disabled from this screen. you use this feature. Applications & Gaming > Port Range Triggering Administration > Reporting The Port Range Triggering screen allows you to set up port The Reporting screen allows you to configure system event triggering. When port triggering is configured, the device logging and to configure sending of e-mail alerts when a watches for specified port numbers in outgoing data. Denial of Service attack is detected. When a match is found, the device records the sending computer’s IP address so that when the requested data returns, it can be sent to the proper computer. Wireless ADSL2+ Modem Router 6

Chapter 3 Advanced Configuration Administration > Diagnostics The Diagnostics screen allows you to perform a ping test to check the status of your Internet connection. Administration > Back Up & Restore The Back Up & Restore screen allows you to back up and restore the configuration settings of your device. Administration > Factory Defaults The Factory Defaults screen allows you to restore the factory defaults of the device. All savings you have saved will be lost NOTE: Restoring the factory defaults causes all settings you have previously saved to be lost. Administration > Firmware Upgrade The Firmware Upgrade screen allows you to upgrade the device’s firmware. Administration > Language The Language screen allows you to select an available language for the utility. Status Tab The Status tab allows you to display status information. For detailed information on the Status tab, refer to the Utility’s online help pages. Status > Modem Router The Modem Router screen displays information about the device and its current settings. The on-screen information will vary depending on the Internet Connection Type you use. Status > Local Network The Local Network screen displays the status of your Local Area Network. Status > Wireless Network The Wireless Network screen displays some basic information about the wireless network of the device. Status > DSL Connection The DSL Connection screen displays the status of your DSL connection. Wireless ADSL2+ Modem Router 7

Appendix B Specifications Appendix B: Operating Temp. Storage Temp. 0 to 40°C (32 to 104°F) -20 to 70°C (-4 to 158°F) Specifications Operating Humidity 10 to 85% Noncondensing X2000 v2 X2000 Storage Humidity 5 to 90% Noncondensing Standards WLAN: 802.11n draft 2.0, 802.11g, 802.11b Ethernet: 802.3, 802.3u ADSL: T1.413i2, G.992.1 (G.DMT), G.992.2 (G.Lite), G.992.3 (ADSL2), G.992.5 (ADSL2+) for Annex A, B, M, L, U-R2 for Annex B Ports DSL, Ethernet (1-4), Power Buttons On/Off, Reset, Wi-Fi Protected Setup™ LEDs Power, Ethernet (1-4), Security, Wireless, DSL, Internet Cabling Type CAT5, RJ-11 (for Annex A), RJ-45 (for Annex B) Antennas 2 Internal Modulations 802.11b: CCK/QPSK, BPSK 802.11g: OFDM/BPSK, QPSK, 16-QAM, 64-QAM 802.11n: OFDM/BPSK, QPSK, 16-QAM, 64-QAM Transmit Power 802.11b: 17.0 ± 1.0 dBm 802.11g: 15.0 ± 1.0 dBm 802.11n: 13.0 ± 1.5 dBm Receive Sensitivity -80 dBm (typical) @ 11 Mbps -70 dBm (typical) @ 54 Mbps -61 dBm (typical) @ 130 Mbps -61 dBm (typical) @ 270 Mbps Antenna Gain 1.45 & 3.04 dBi Security Features WPA2™/WPA™ Personal and Enterprise; 128, 64 bits WEP; MAC Address Filtering; SPI Firewall OS Requirements Windows XP, Vista, or Vista 64-bit (to run the edition with latest updates (for Setup CD) Network Magic and Setup Wizard); Mac OS X 10.4 or higher (for Setup Wizard) Environmental Dimensions 202 x 34 x 160 mm (8,0” x 1,3” x 6,3”) Weight 362 g (12,8 oz) Power 12VDC, 1A Certification FCC, CE, Telepermit, K.21, UL, CB, Wi-Fi (802.11b/g), WPA™, WPA2™, WMM, Wi-Fi Protected Setup™ Wireless ADSL2+ Modem Router 8

Appendix B Specifications Wireless ADSL2+ Modem Router 9

Appendix A Troubleshooting Appendix A: You need to modify the basic settings on the deviceRouter. Troubleshooting Run the Setup Wizard on the Setup CD-ROM. You need to modify the advanced settings on the Your computer cannot connect to the Internet. device. Follow the instructions until your computer can connect Open the web browser (for example, Internet Explorer or to the Internet: Firefox), and enter the device’s IP address in the address •• Make sure that the Modem Router is powered on. The field (the default IP address is 192.168.1.1). When Power LED should be green and not flashing. prompted, complete the User name and Password fields (the default user name and password is admin). Click the •• If the Power LED is flashing, then power off all of appropriate tab to change the settings your network devices, including the Modem Router and computers. Then power on each device in the following order: WEB: If your questions are not addressed here, refer to the website, 1. Modem Router www.linksysbycisco.com/support 2. Computer •• Check the LEDs on the device’s front panel. Make sure the Power, DSL, and at least one of the numbered Ethernet LEDs are lit. If they are not, then check the cable connections. The computer should be connected to one of the Ethernet ports numbered 1-4 on the device, and the device’s DSL port must be connected to the ADSL line. When you double-click the web browser, you are prompted for a user name and password. If you want to get rid of the prompt, follow these instructions. Launch the web browser and perform the following steps (these steps are specific to Internet Explorer but are similar for other browsers): 3. Select Tools > Internet Options. 4. Click the Connections tab. 5. Select Never dial a connection. 6. Click OK. You are using a static IP address and cannot connect. Refer to Windows Help and change your Internet Protocol (TCP/IP) Properties to Obtain an IP address automatically. The computer cannot connect wirelessly to the network. Make sure the wireless network name or SSID is the same on both the computer and the device. If you have enabled wireless security, then make sure the same security method and key are used by both the computer and the device. Wireless ADSL2+ Modem Router 10

Appendix C Regulatory Information Appendix C: Íslenska Þetta tæki er samkvæmt grunnkröfum og öðrum viðeigandi ákvæðum Tilskipunar Regulatory Information [Icelandic]: 1999/5/EC. Italiano Questo apparato é conforme ai requisiti European Union [Italian]: essenziali ed agli altri principi sanciti dalla Direttiva 1999/5/CE. The following information applies if you use the product within the European Union. Šī iekārta atbilst Direktīvas 1999/5/ Latviski EK būtiskajām prasībām un citiem ar to [Latvian]: Declaration of Conformity with Regard to EU saistītajiem noteikumiem. Directive 1999/5/EC (R&TTE Directive) Šis įrenginys tenkina 1999/5/EB Direktyvos Lietuvių Compliance Information for 2,4-GHz and 5-GHz Wireless esminius reikalavimus ir kitas šios direktyvos [Lithuanian]: nuostatas. Products Relevant to the EU and Other Countries Following the EU Directive 1999/5/EC (R&TTE Directive) Nederlands Dit apparaat voldoet aan de essentiele eisen en andere van toepassing zijnde bepalingen NOTE: The 5 GHz information does not apply to [Dutch]: van de Richtlijn 1999/5/EC. Wireless-G (802.11g) only products. Malti Dan l-apparat huwa konformi mal-ħtiġiet essenzjali u l-provedimenti l-oħra rilevanti [Maltese]: tad-Direttiva 1999/5/EC. Това оборудване отговаря на съществените Български изисквания и приложими клаузи на [Bulgarian] Ez a készülék teljesíti az alapvető Директива 1999/5/ЕС. Magyar követelményeket és más 1999/5/EK [Hungarian]: irányelvben meghatározott vonatkozó Česky Toto zařízení je v souladu se základními rendelkezéseket. požadavky a ostatními odpovídajícími [Czech]: ustanoveními Směrnice 1999/5/EC. Norsk Dette utstyret er i samsvar med de grunnleggende krav og andre relevante Dansk Dette udstyr er i overensstemmelse med [Norwegian]: bestemmelser i EU-direktiv 1999/5/EF. de væsentlige krav og andre relevante [Danish]: bestemmelser i Direktiv 1999/5/EF. Polski Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami Dieses Gerät entspricht den grundlegenden [Polish]: Deutsch określonymi Dyrektywą UE: 1999/5/EC. Anforderungen und den weiteren [German]: entsprechenden Vorgaben der Richtlinie 1999/5/EU. Português Este equipamento está em conformidade com os requisitos essenciais e outras provisões [Portuguese]: relevantes da Directiva 1999/5/EC. Eesti See seade vastab direktiivi 1999/5/EÜ olulistele nõuetele ja teistele asjakohastele [Estonian]: sätetele. Acest echipament este in conformitate Română cu cerintele esentiale si cu alte prevederi [Romanian] relevante ale Directivei 1999/5/EC. This equipment is in compliance with the English: essential requirements and other relevant Slovensko Ta naprava je skladna z bistvenimi zahtevami provisions of Directive 1999/5/EC. in ostalimi relevantnimi pogoji Direktive [Slovenian]: 1999/5/EC. Español Este equipo cumple con los requisitos esenciales asi como con otras disposiciones Toto zariadenie je v zhode so základnými [Spanish]: de la Directiva 1999/5/CE. Slovensky požiadavkami a inými príslušnými [Slovak]: nariadeniami direktív: 1999/5/EC. Ελληνική Αυτός ο εξοπλισµός είναι σε συµµόρφωση µε τις ουσιώδεις απαιτήσεις και άλλες σχετικές Tämä laite täyttää direktiivin 1999/5/EY [Greek]: διατάξεις της Οδηγίας 1999/5/EC. Suomi olennaiset vaatimukset ja on siinä asetettujen [Finnish]: muiden laitetta koskevien määräysten Cet appareil est conforme aux exigences mukainen. Français essentielles et aux autres dispositions [French]: Svenska Denna utrustning är i överensstämmelse med pertinentes de la Directive 1999/5/EC. de väsentliga kraven och andra relevanta [Swedish]: bestämmelser i Direktiv 1999/5/EC. Wireless ADSL2+ Modem Router 11

Appendix C Regulatory Information For all products, the Declaration of Conformity (DofC) is nessuna limitazione, eccetto per i paesi menzionati di available through one or more of these options: seguito: •• A pdf file is included on the product’s CD. Das Produkt kann in allen EU Staaten ohne Einschränkungen eingesetzt werden (sowie in anderen Staaten die der EU •• A print copy is included with the product. Direktive 1999/5/CE folgen) mit Außnahme der folgenden •• A pdf file is available on the product’s webpage. aufgeführten Staaten: Visit www.linksysbycisco.com/international and In the majority of the EU and other European countries, select your country or region. Then select your product. the 2,4- and 5-GHz bands have been made available for If you need any other technical documentation, see the the use of wireless local area networks (LANs). Later in “Technical Documents on www.linksysbycisco.com/ this document you will find an overview of countries in international” section, as shown later in this appendix. which additional restrictions or requirements or both are applicable. Non-Wireless Equipment (ADSL Modems/Gateways) The requirements for any country may evolve. Linksys The following standards were applied during the recommends that you check with the local authorities for assessment of the product against the requirements of the latest status of their national regulations for both the the Directive 1999/5/EC: 2,4- and 5-GHz wireless LANs. •• EMC: EN 55 022 and EN 55 024 The following countries have restrictions and/or requirements in addition to those given in the table •• Safety: EN 60950-1 labeled “Overview of Regulatory Requirements for Wireless CE Marking LANs”: For the Linksys products such as the ADSL modems/ Denmark gateways, the following CE mark is added to the equipment. In Denmark, the band 5150 - 5350 MHz is also allowed for outdoor usage. I Danmark må frekvensbåndet 5150 - 5350 også anvendes udendørs. Wireless Equipment (Wireless-N/G/A/B Products) France The following standards were applied during the For 2,4 GHz, the product should not be used outdoors assessment of the product against the requirements of in the band 2454 - 2483,5 MHz. There are no restrictions the Directive 1999/5/EC: when used in other parts of the 2,4 GHz band OR when used indoors. Check http://www.arcep.fr/ for more •• Radio: EN 300 328 and/or EN 301 893 as applicable details. •• EMC: EN 301 489-1, EN 301 489-17 Pour la bande 2,4 GHz, l’ équipement ne doit pas être •• Safety: EN 60950-1 and either EN 50385 or EN 50371 utilisé en extérieur dans la bande 2454- 2483,5 MHz. Il n’y a aucune restriction pour son utilisation dans d’autres For the Linksys Wireless-N, -G, -B, and/or -A products, the parties de la bande des 2,4 GHz ainsi que pour une following CE mark, and class 2 identifier are added to the utilisation en intérieur. Consultez http://www.arcep.fr/ equipment. pour de plus amples détails. Italy This product meets the National Radio Interface and the requirements specified in the National Frequency National Restrictions Allocation Table for Italy. Unless this 2,4-GHz wireless LAN product is operating within the boundaries of the owner’s This product may be used in all EU countries (and other property, its use requires a “general authorization”. countries following the EU directive 1999/5/EC) without Bands 5150-5350 MHz and 5470-5725 MHz require any limitation except for the countries mentioned below: general authorization if used outdoors. Please check Ce produit peut être utilisé dans tous les pays de l’UE (et dans http://www.comunicazioni.it/it/ for more details. tous les pays ayant transposés la directive 1999/5/CE) sans Questo prodotto è conforme alla specifiche di Interfaccia aucune limitation, excepté pour les pays mentionnés ci- Radio Nazionali e rispetta il Piano Nazionale di ripartizione dessous: delle frequenze in Italia. Se non viene installato all’interno Questo prodotto è utilizzabile in tutte i paesi EU (ed in tutti del proprio fondo, l’utilizzo di prodotti Wireless LAN a gli altri paesi che seguono le direttive EU 1999/5/EC) senza Wireless ADSL2+ Modem Router 12

Appendix C Regulatory Information 2,4 GHz richiede una “Autorizzazione Generale”. L’utilizzo Third-Party Software or Firmware all’aperto delle bande di frequenza 5150-5350 MHz e 5470-5725 MHz è soggetto ad autorizzazione generale. The use of software or firmware not supported/provided Consultare http://www.comunicazioni.it/it/ per by Linksys may result that the equipment is no longer maggiori dettagli. compliant with the regulatory requirements. Latvia Technical Documents on The outdoor usage of the 2,4 GHz band requires an www.linksysbycisco.com/international authorization from the Electronic Communications Office. Follow these steps to access technical documents: Please check http://www.esd.lv for more details. 2,4 GHz frekveču joslas izmantošanai ārpus telpām 1. Enter http://www.linksysbycisco.com/international nepieciešama atļauja no Elektronisko sakaru direkcijas. in your web browser. Vairāk informācijas: http://www.esd.lv. 2. Select the country or region in which you live. 3. Click the Products tab. Notes: 4. Select the appropriate product category. 1. Although Norway, Switzerland and Liechtenstein are not EU member states, the EU Directive 1999/5/EC has 5. Select the product sub-category, if necessary. also been implemented in those countries. 6. Select the product. 2. The regulatory limits for maximum output power are Note to US model owner: To comply with US FCC specified in EIRP. The EIRP level (in dBm) of a device can regulation, the country selection function has been be calculated by adding the gain of the antenna used completely removed from all US models. The above (specified in dBi) to the output power available at the function is for non-US models only. connector (specified in dBm). 7. Select the type of documentation you want from the More Information section. The document will open in PDF format Product Usage Restrictions if you have Adobe Acrobat installed on your computer. This product is designed for indoor usage only. Outdoor usage is not recommended, unless otherwise noted. NOTE: If you have questions regarding Outdoor usage may even be prohibited (see below). the compliance of this product or you cannot find the information you need, 2,4 GHz Restrictions please contact your local sales office or visit www.linksysbycisco.com/international This product is designed for use with the standard, integral or dedicated (external) antenna(s) that is/are shipped together with the equipment. However, some applications may require the antenna(s), if removable, to be separated from the product and installed remotely from the device by using extension cables. For these applications, Linksys offers an R SMA extension cable (AC9SMA) and an R-TNC extension cable (AC9TNC). Both of these cables are 9 meters long and have a cable loss (attenuation) of 5 dB. To compensate for the attenuation, Linksys also offers higher gain antennas, the HGA7S (with R-SMA connector) and HGA7T (with R-TNC connector). These antennas have a gain of 7 dBi and may only be used with either the R-SMA or R-TNC extension cable. Combinations of extension cables and antennas resulting in a radiated power level exceeding 20 dBm (100 mW) EIRP (2,4 GHz band) are illegal. 5 GHz Restrictions Products that operate in any frequency within 5150 to 5350 MHz are restricted to indoor use only, in all European countries except Denmark. Wireless ADSL2+ Modem Router 13

Appendix C Regulatory Information User Information for Consumer Products Covered Čeština (Czech) - Informace o ochraně životního prostředí pro zákazníky v zemích Evropské unie by EU Directive 2002/96/EC on Waste Electric and Evropská směrnice 2002/96/ES zakazuje, aby zařízení označené Electronic Equipment (WEEE) tímto symbolem na produktu anebo na obalu bylo likvidováno s netříděným komunálním odpadem. Tento symbol udává, This document contains important information for users že daný produkt musí být likvidován odděleně od běžného with regards to the proper disposal and recycling of komunálního odpadu. Odpovídáte za likvidaci tohoto produktu Linksys products. Consumers are required to comply a dalších elektrických a elektronických zařízení prostřednictvím with this notice for all electronic products bearing the určených sběrných míst stanovených vládou nebo místními following symbol: úřady. Správná likvidace a recyklace pomáhá předcházet potenciálním negativním dopadům na životní prostředí a lidské zdraví. Podrobnější informace o likvidaci starého vybavení si laskavě vyžádejte od místních úřadů, podniku zabývajícího se likvidací komunálních odpadů nebo obchodu, kde jste produkt zakoupili. Dansk (Danish) - Miljøinformation for kunder i EU EU-direktiv 2002/96/EF kræver, at udstyr der bærer dette symbol på produktet og/eller emballagen ikke må bortskaffes som English - Environmental Information for Customers in usorteret kommunalt affald. Symbolet betyder, at dette produkt skal bortskaffes adskilt fra det almindelige husholdningsaffald. the European Union Det er dit ansvar at bortskaffe dette og andet elektrisk og European Directive 2002/96/EC requires that the equipment elektronisk udstyr via bestemte indsamlingssteder udpeget bearing this symbol on the product and/or its packaging must af staten eller de lokale myndigheder. Korrekt bortskaffelse not be disposed of with unsorted municipal waste. The symbol og genvinding vil hjælpe med til at undgå mulige skader for indicates that this product should be disposed of separately miljøet og menneskers sundhed. Kontakt venligst de lokale from regular household waste streams. It is your responsibility to myndigheder, renovationstjenesten eller den butik, hvor du dispose of this and other electric and electronic equipment via har købt produktet, angående mere detaljeret information om designated collection facilities appointed by the government or bortskaffelse af dit gamle udstyr. local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal Deutsch (German) - Umweltinformation für Kunden of your old equipment, please contact your local authorities, innerhalb der Europäischen Union waste disposal service, or the shop where you purchased the Die Europäische Richtlinie 2002/96/EC verlangt, dass technische product. Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem Symbol versehen ist , nicht zusammen mit unsortiertem Български (Bulgarian) - Информация относно Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt von regulärem Haushaltmüll getrennt опазването на околната среда за потребители в entsorgt werden sollte. Es liegt in Ihrer Verantwortung, dieses Европейския съюз Gerät und andere elektrische und elektronische Geräte über Европейска директива 2002/96/EC изисква уредите, носещи die dafür zuständigen und von der Regierung oder örtlichen този символ върху изделието и/или опаковката му, да не Behörden dazu bestimmten Sammelstellen zu entsorgen. се изхвърля т с несортирани битови отпадъци. Символът Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei, обозначава, че изделието трябва да се изхвърля отделно от potentielle negative Folgen für Umwelt und die menschliche сметосъбирането на обикновените битови отпадъци. Ваша Gesundheit zu vermeiden. Wenn Sie weitere Informationen zur е отговорността този и другите електрически и електронни Entsorgung Ihrer Altgeräte benötigen, wenden Sie sich bitte an уреди да се изхвърлят в предварително определени от die örtlichen Behörden oder städtischen Entsorgungsdienste държавните или общински органи специализирани пунктове oder an den Händler, bei dem Sie das Produkt erworben haben. за събиране. Правилното изхвърляне и рециклиране ще спомогнат да се предотвратят евентуални вредни за околната среда и здравето на населението последствия. За по-подробна информация относно изхвърлянето на вашите стари уреди се обърнете към местните власти, службите за сметосъбиране или магазина, от който сте закупили уреда. Wireless ADSL2+ Modem Router 14

Appendix C Regulatory Information Eesti (Estonian) - Keskkonnaalane informatsioon Français (French) - Informations environnementales Euroopa Liidus asuvatele klientidele pour les clients de l’Union européenne Euroopa Liidu direktiivi 2002/96/EÜ nõuete kohaselt on La directive européenne 2002/96/CE exige que l’équipement seadmeid, millel on tootel või pakendil käesolev sümbol , sur lequel est apposé ce symbole sur le produit et/ou son keelatud kõrvaldada koos sorteerimata olmejäätmetega. See emballage ne soit pas jeté avec les autres ordures ménagères. Ce sümbol näitab, et toode tuleks kõrvaldada eraldi tavalistest symbole indique que le produit doit être éliminé dans un circuit olmejäätmevoogudest. Olete kohustatud kõrvaldama käesoleva distinct de celui pour les déchets des ménages. Il est de votre ja ka muud elektri- ja elektroonikaseadmed riigi või kohalike responsabilité de jeter ce matériel ainsi que tout autre matériel ametiasutuste poolt ette nähtud kogumispunktide kaudu. électrique ou électronique par les moyens de collecte indiqués Seadmete korrektne kõrvaldamine ja ringlussevõtt aitab vältida par le gouvernement et les pouvoirs publics des collectivités võimalikke negatiivseid tagajärgi keskkonnale ning inimeste territoriales. L’élimination et le recyclage en bonne et due forme tervisele. Vanade seadmete kõrvaldamise kohta täpsema ont pour but de lutter contre l’impact néfaste potentiel de ce informatsiooni saamiseks võtke palun ühendust kohalike type de produits sur l’environnement et la santé publique. Pour ametiasutustega, jäätmekäitlusfirmaga või kauplusega, kust te plus d’informations sur le mode d’élimination de votre ancien toote ostsite. équipement, veuillez prendre contact avec les pouvoirs publics locaux, le service de traitement des déchets, ou l’endroit où vous avez acheté le produit. Español (Spanish) - Información medioambiental para clientes de la Unión Europea La Directiva 2002/96/CE de la UE exige que los equipos que Italiano (Italian) - Informazioni relative all’ambiente lleven este símbolo en el propio aparato y/o en su embalaje per i clienti residenti nell’Unione Europea no deben eliminarse junto con otros residuos urbanos no La direttiva europea 2002/96/EC richiede che le apparecchiature seleccionados. El símbolo indica que el producto en cuestión contrassegnate con questo simbolo sul prodotto e/o debe separarse de los residuos domésticos convencionales con sull’imballaggio non siano smaltite insieme ai rifiuti urbani vistas a su eliminación. Es responsabilidad suya desechar este y non differenziati. Il simbolo indica che questo prodotto non cualesquiera otros aparatos eléctricos y electrónicos a través de deve essere smaltito insieme ai normali rifiuti domestici. È los puntos de recogida que ponen a su disposición el gobierno y responsabilità del proprietario smaltire sia questi prodotti sia las autoridades locales. Al desechar y reciclar correctamente estos le altre apparecchiature elettriche ed elettroniche mediante aparatos estará contribuyendo a evitar posibles consecuencias le specifiche strutture di raccolta indicate dal governo o dagli negativas para el medio ambiente y la salud de las personas. Si enti pubblici locali. Il corretto smaltimento ed il riciclaggio desea obtener información más detallada sobre la eliminación aiuteranno a prevenire conseguenze potenzialmente negative segura de su aparato usado, consulte a las autoridades locales, per l’ambiente e per la salute dell’essere umano. Per ricevere al servicio de recogida y eliminación de residuos de su zona o informazioni più dettagliate circa lo smaltimento delle vecchie pregunte en la tienda donde adquirió el producto. apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel quale avete acquistato il prodotto. Ελληνικά (Greek) - Στοιχεία περιβαλλοντικής προστασίας για πελάτες εντός της Ευρωπαϊκής Ένωσης Latviešu valoda (Latvian) - Ekoloģiska informācija Σύμφωνα με την Κοινοτική Οδηγία 2002/96/EC, ο εξοπλισμός που klientiem Eiropas Savienības jurisdikcijā φέρει αυτό το σύμβολο στο προϊόν ή/και τη συσκευασία του Direktīvā 2002/96/EK ir prasība, ka aprīkojumu, kam pievienota δεν πρέπει να απορρίπτεται μαζί με τα μη διαχωρισμένα αστικά zīme uz paša izstrādājuma vai uz tā iesaiņojuma, nedrīkst απορρίμματα. Το σύμβολο υποδεικνύει ότι αυτό το προϊόν θα izmest nešķirotā veidā kopā ar komunālajiem atkritumiem πρέπει να απορρίπτεται ξεχωριστά από τα συνήθη οικιακά (tiem, ko rada vietēji iedzīvotāji un uzņēmumi). Šī zīme nozīmē απορρίμματα. Είστε υπεύθυνος για την απόρριψη του παρόντος to, ka šī ierīce ir jāizmet atkritumos tā, lai tā nenonāktu kopā ar και άλλου ηλεκτρικού και ηλεκτρονικού εξοπλισμού μέσω των parastiem mājsaimniecības atkritumiem. Jūsu pienākums ir šo καθορισμένων εγκαταστάσεων συγκέντρωσης απορριμμάτων, un citas elektriskas un elektroniskas ierīces izmest atkritumos, οι οποίες ορίζονται από το κράτος ή τις αρμόδιες τοπικές αρχές. izmantojot īpašus atkritumu savākšanas veidus un līdzekļus, ko Η σωστή απόρριψη και ανακύκλωση συμβάλλει στην πρόληψη nodrošina valsts un pašvaldību iestādes. Ja izmešana atkritumos ενδεχόμενων αρνητικών επιπτώσεων στο περιβάλλον και την un pārstrāde tiek veikta pareizi, tad mazinās iespējamais υγεία. Για περισσότερες πληροφορίες σχετικά με την απόρριψη kaitējums dabai un cilvēku veselībai. Sīkākas ziņas par του παλαιού σας εξοπλισμού, επικοινωνήστε με τις τοπικές novecojuša aprīkojuma izmešanu atkritumos jūs varat saņemt αρχές, τις υπηρεσίες αποκομιδής απορριμμάτων ή το κατάστημα vietējā pašvaldībā, atkritumu savākšanas dienestā, kā arī veikalā, από το οποίο αγοράσατε το προϊόν. kur iegādājāties šo izstrādājumu. Wireless ADSL2+ Modem Router 15

Appendix C Regulatory Information Lietuvškai (Lithuanian) - Aplinkosaugos informacija, Nederlands (Dutch) - Milieu-informatie voor klanten skirta Europos Sąjungos vartotojams in de Europese Unie Europos direktyva 2002/96/EC numato, kad įrangos, kuri ir De Europese Richtlijn 2002/96/EC schrijft voor dat apparatuur die kurios pakuotė yra pažymėta šiuo simboliu (įveskite simbolį), is voorzien van dit symbool op het product of de verpakking, negalima šalinti kartu su nerūšiuotomis komunalinėmis niet mag worden ingezameld met niet-gescheiden huishoudelijk atliekomis. Šis simbolis rodo, kad gaminį reikia šalinti atskirai afval. Dit symbool geeft aan dat het product apart moet worden nuo bendro buitinių atliekų srauto. Jūs privalote užtikrinti, kad ingezameld. U bent zelf verantwoordelijk voor de vernietiging ši ir kita elektros ar elektroninė įranga būtų šalinama per tam van deze en andere elektrische en elektronische apparatuur via de tikras nacionalinės ar vietinės valdžios nustatytas atliekų rinkimo daarvoor door de landelijke of plaatselijke overheid aangewezen sistemas. Tinkamai šalinant ir perdirbant atliekas, bus išvengta inzamelingskanalen. De juiste vernietiging en recycling van galimos žalos aplinkai ir žmonių sveikatai. Daugiau informacijos deze apparatuur voorkomt mogelijke negatieve gevolgen voor apie jūsų senos įrangos šalinimą gali pateikti vietinės valdžios het milieu en de gezondheid. Voor meer informatie over het institucijos, atliekų šalinimo tarnybos arba parduotuvės, kuriose vernietigen van uw oude apparatuur neemt u contact op met įsigijote tą gaminį. de plaatselijke autoriteiten of afvalverwerkingsdienst, of met de winkel waar u het product hebt aangeschaft. Malti (Maltese) - Informazzjoni Ambjentali għal Klijenti fl-Unjoni Ewropea Norsk (Norwegian) - Miljøinformasjon for kunder i EU Id-Direttiva Ewropea 2002/96/KE titlob li t-tagħmir li jkun fih EU-direktiv 2002/96/EF krever at utstyr med følgende symbol is-simbolu fuq il-prodott u/jew fuq l-ippakkjar ma jistax avbildet på produktet og/eller pakningen, ikke må kastes jintrema ma’ skart muniċipali li ma ġiex isseparat. Is-simbolu sammen med usortert avfall. Symbolet indikerer at dette jindika li dan il-prodott għandu jintrema separatament minn ma’ produktet skal håndteres atskilt fra ordinær avfallsinnsamling l-iskart domestiku regolari. Hija responsabbiltà tiegħek li tarmi for husholdningsavfall. Det er ditt ansvar å kvitte deg med dan it-tagħmir u kull tagħmir ieħor ta’ l-elettriku u elettroniku dette produktet og annet elektrisk og elektronisk avfall via egne permezz ta’ faċilitajiet ta’ ġbir appuntati apposta mill-gvern jew innsamlingsordninger slik myndighetene eller kommunene mill-awtoritajiet lokali. Ir-rimi b’mod korrett u r-riċiklaġġ jgħin bestemmer. Korrekt avfallshåndtering og gjenvinning vil jipprevjeni konsegwenzi negattivi potenzjali għall-ambjent u være med på å forhindre mulige negative konsekvenser for għas-saħħa tal-bniedem. Għal aktar informazzjoni dettaljata miljø og helse. For nærmere informasjon om håndtering av dwar ir-rimi tat-tagħmir antik tiegħek, jekk jogħġbok ikkuntattja det kasserte utstyret ditt, kan du ta kontakt med kommunen, lill-awtoritajiet lokali tiegħek, is-servizzi għar-rimi ta’ l-iskart, jew en innsamlingsstasjon for avfall eller butikken der du kjøpte il-ħanut minn fejn xtrajt il-prodott. produktet. Magyar (Hungarian) - Környezetvédelmi információ az Polski (Polish) - Informacja dla klientów w Unii európai uniós vásárlók számára Europejskiej o przepisach dotyczących ochrony A 2002/96/EC számú európai uniós irányelv megkívánja, środowiska hogy azokat a termékeket, amelyeken, és/vagy amelyek Dyrektywa Europejska 2002/96/EC wymaga, aby sprzęt csomagolásán az alábbi címke megjelenik, tilos a többi oznaczony symbolem znajdującym się na produkcie i/ szelektálatlan lakossági hulladékkal együtt kidobni. A címke lub jego opakowaniu nie był wyrzucany razem z innymi azt jelöli, hogy az adott termék kidobásakor a szokványos niesortowanymi odpadami komunalnymi. Symbol ten wskazuje, háztartási hulladékelszállítási rendszerektõl elkülönített eljárást że produkt nie powinien być usuwany razem ze zwykłymi kell alkalmazni. Az Ön felelõssége, hogy ezt, és más elektromos odpadami z gospodarstw domowych. Na Państwu spoczywa és elektronikus berendezéseit a kormányzati vagy a helyi obowiązek wyrzucania tego i innych urządzeń elektrycznych hatóságok által kijelölt gyűjtõredszereken keresztül számolja oraz elektronicznych w punktach odbioru wyznaczonych fel. A megfelelõ hulladékfeldolgozás segít a környezetre és az przez władze krajowe lub lokalne. Pozbywanie się sprzętu emberi egészségre potenciálisan ártalmas negatív hatások we właściwy sposób i jego recykling pomogą zapobiec megelõzésében. Ha elavult berendezéseinek felszámolásához potencjalnie negatywnym konsekwencjom dla środowiska i további részletes információra van szüksége, kérjük, lépjen zdrowia ludzkiego. W celu uzyskania szczegółowych informacji kapcsolatba a helyi hatóságokkal, a hulladékfeldolgozási o usuwaniu starego sprzętu, prosimy zwrócić się do lokalnych szolgálattal, vagy azzal üzlettel, ahol a terméket vásárolta. władz, służb oczyszczania miasta lub sklepu, w którym produkt został nabyty. Wireless ADSL2+ Modem Router 16

Appendix C Regulatory Information Português (Portuguese) - Informação ambiental para Slovenščina (Slovene) - Okoljske informacije za clientes da União Europeia stranke v Evropski uniji A Directiva Europeia 2002/96/CE exige que o equipamento Evropska direktiva 2002/96/ES prepoveduje odlaganje opreme s que exibe este símbolo no produto e/ou na sua embalagem tem simbolom – na izdelku in/ali na embalaži z nesortiranimi não seja eliminado junto com os resíduos municipais não komunalnimi odpadki. Ta simbol opozarja, da je treba izdelek separados. O símbolo indica que este produto deve ser zavreči ločeno od preostalih gospodinjskih odpadkov. Vaša eliminado separadamente dos resíduos domésticos regulares. odgovornost je, da to in preostalo električno in elektronsko É da sua responsabilidade eliminar este e qualquer outro opremo oddate na posebna zbirališča, ki jih določijo državne equipamento eléctrico e electrónico através das instalações ustanove ali lokalne oblasti. S pravilnim odlaganjem in de recolha designadas pelas autoridades governamentais ou recikliranjem boste preprečili morebitne škodljive vplive na locais. A eliminação e reciclagem correctas ajudarão a prevenir okolje in zdravje ljudi. Če želite izvedeti več o odlaganju stare as consequências negativas para o ambiente e para a saúde opreme, se obrnite na lokalne oblasti, odlagališče odpadkov ali humana. Para obter informações mais detalhadas sobre a trgovino, kjer ste izdelek kupili. forma de eliminar o seu equipamento antigo, contacte as autoridades locais, os serviços de eliminação de resíduos ou o estabelecimento comercial onde adquiriu o produto. Suomi (Finnish) - Ympäristöä koskevia tietoja EU- alueen asiakkaille EU-direktiivi 2002/96/EY edellyttää, että jos laitteistossa on tämä Română (Romanian) - Informaţii de mediu pentru symboli itse tuotteessa ja/tai sen pakkauksessa, laitteistoa clienţii din Uniunea Europeană ei saa hävittää lajittelemattoman yhdyskuntajätteen mukana. Directiva europeană 2002/96/CE impune ca echipamentele care Symboli merkitsee sitä, että tämä tuote on hävitettävä erillään prezintă acest simbol pe produs şi/sau pe ambalajul acestuia să tavallisesta kotitalousjätteestä. Sinun vastuullasi on hävittää nu fie casate împreună cu gunoiul menajer municipal. Simbolul tämä elektroniikkatuote ja muut vastaavat elektroniikkatuotteet indică faptul că acest produs trebuie să fie casat separat de viemällä tuote tai tuotteet viranomaisten määräämään gunoiul menajer obişnuit. Este responsabilitatea dvs. să casaţi keräyspisteeseen. Laitteiston oikea hävittäminen estää acest produs şi alte echipamente electrice şi electronice prin mahdolliset kielteiset vaikutukset ympäristöön ja ihmisten intermediul unităţilor de colectare special desemnate de guvern terveyteen. Lisätietoja vanhan laitteiston oikeasta hävitystavasta sau de autorităţile locale. Casarea şi reciclarea corecte vor ajuta saa paikallisilta viranomaisilta, jätteenhävityspalvelusta tai siitä la prevenirea potenţialelor consecinţe negative asupra sănătăţii myymälästä, josta ostit tuotteen. mediului şi a oamenilor. Pentru mai multe informaţii detaliate cu privire la casarea acestui echipament vechi, contactaţi autorităţile locale, serviciul de salubrizare sau magazinul de la Svenska (Swedish) - Miljöinformation för kunder i care aţi achiziţionat produsul. Europeiska unionen Det europeiska direktivet 2002/96/EC kräver att utrustning med denna symbol på produkten och/eller förpackningen inte får Slovenčina (Slovak) - Informácie o ochrane životného kastas med osorterat kommunalt avfall. Symbolen visar att denna prostredia pre zákazníkov v Európskej únii produkt bör kastas efter att den avskiljts från vanligt hushållsavfall. Podľa európskej smernice 2002/96/ES zariadenie s týmto Det faller på ditt ansvar att kasta denna och annan elektrisk och symbolom na produkte a/alebo jeho balení nesmie byť elektronisk utrustning på fastställda insamlingsplatser utsedda likvidované spolu s netriedeným komunálnym odpadom. av regeringen eller lokala myndigheter. Korrekt kassering och Symbol znamená, že produkt by sa mal likvidovať oddelene återvinning skyddar mot eventuella negativa konsekvenser od bežného odpadu z domácností. Je vašou povinnosťou för miljön och personhälsa. För mer detaljerad information om likvidovať toto i ostatné elektrické a elektronické zariadenia kassering av din gamla utrustning kontaktar du dina lokala prostredníctvom špecializovaných zberných zariadení určených myndigheter, avfallshanteringen eller butiken där du köpte vládou alebo miestnymi orgánmi. Správna likvidácia a recyklácia produkten. pomôže zabrániť prípadným negatívnym dopadom na životné prostredie a zdravie ľudí. Ak máte záujem o podrobnejšie informácie o likvidácii starého zariadenia, obráťte sa, prosím, na WEB: For additional information, please visit miestne orgány, organizácie zaoberajúce sa likvidáciou odpadov www.linksysbycisco.com/international alebo obchod, v ktorom ste si produkt zakúpili. Wireless ADSL2+ Modem Router 17

Appendix C Regulatory Information Australia Cisco-Linksys ADSL2+ Devices on Long Lines The following information applies if you use the product ADSL2+ devices may not achieve the type of “high speed” within Australia. operation expected when attached to a line that is longer than intended by the ITU-T Rec. G.996.1 ADSL standard Safety Notice i.e. >3 km of 0.4mm cable or a shorter cable length with several tails or multiples. If the device is installed in such WARNING: To ensure compliance with conditions and does not give the expected “download” exposure limits to radiofrequency fields, the performance, then do not refer the matter to the Telecom antenna of the device should be no closer than Fault Service or ADSL Helpdesk. 20 cm from the body during use. United States of America New Zealand The following information applies if you use the product The following information applies if you use the product within the United States of America. within New Zealand. Federal Communications Commission (FCC) Telepermit Statement Statement The cabling between the phone port and the phone shall not exceed 100 metres. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part PTC200 General Warning 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a The grant of a Telepermit for any item of terminal residential installation. This equipment generates, uses equipment indicates only that Telecom has accepted and can radiate radio frequency energy and, if not installed that the item complies with minimum conditions for and used in accordance with the instructions, may cause connection to its network. It indicates no endorsement harmful interference to radio communications. However, of the product by Telecom, nor does it provide any sort there is no guarantee that interference will not occur in of warranty. Above all, it provides no assurance that any a particular installation. If this equipment does cause item will work correctly in all respects with another item harmful interference to radio or television reception, of Telepermitted equipment of a different make or model, which can be determined by turning the equipment nor does it imply that any product is compatible with all of off and on, the user is encouraged to try to correct the Telecom’s network services. interference by one of the following measures: Wireless Connectivity Security on Cisco-Linksys •• Reorient or relocate the receiving antenna. ADSL2+ Devices •• Increase the separation between the equipment and receiver. Setting up the security of the wireless connection associated with ADSL2+ device is the user’s responsibility. •• Connect the equipment into an outlet on a circuit Telecom will take no responsibility for charges made to different from that to which the receiver is connected. user’s accounts due to poorly organized wireless security •• Consult the dealer or an experienced radio/TV allowing unknown users to connect to the Internet via this technician for help. device. Do not complain to the Telecom Fault Service or Jetstream Helpdesk should this occur. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) General Warning for Cisco-Linksys ADSL2+ This device may not cause harmful interference, and (2) this device must accept any interference received, including Devices and ADSL2+ Capability interference that may cause undesired operation. This device has been tested and found suitable to connect FCC Caution: Any changes or modifications not expressly to the Telecom ADSL2+ capability. This indicates only that approved by the party responsible for compliance could Telecom has accepted that this device complies with the void the user’s authority to operate this equipment. spectrum management plan for ADSL2+ on copper cable and with simple voiceband compatibility tests included IEEE 802.11b or 802.11g operation of this product in the in PTC273. It does not indicate that this device is fully U.S.A. is firmware-limited to channels 1 through 11. compatible with all services accessed via the ADSL2+ capability. Contact the supplier of the device when issues occur. Do not call the Telecom Fault Service or the Jetstream Helpdesk. Wireless ADSL2+ Modem Router 18

Appendix C Regulatory Information FCC Radiation Exposure Statement If you experience trouble with this telephone equipment, Please contact the following address and phone number This equipment complies with FCC radiation exposure for information on obtaining service or repairs. limits set forth for an uncontrolled environment. This equipment should be installed and operated with The telephone company may ask that you disconnect this minimum distance 20cm between the radiator & your equipment from the network until the problem has been body. corrected or until you are sure that the equipment is not malfunctioning. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is The availability of some specific channels and/or subject to state tariffs. operational frequency bands are country dependent and are firmware programmed at the factory to match COMPANY: Cisco Consumer Products LLC the intended destination. The firmware setting is not ADDRESS: 121 Theory , Irvine, Ca., 92617, USA accessible by the end user. TEL NO: 1 800-326-7114 FCC Part 68 Statement This equipment complies with Part 68 of the FCC rules Safety Notices and the requirements adopted by the ACTA. On the WARNING: To reduce the risk of fire, use only bottom of this equipment is a label that contains, among No.26 AWG or larger telecommunication line other information, a product identifier in the format cord. US: Q87DL01BX2000V2.If requested, this number must be provided to the telephone company. The REN is used to determine the number of devices that WARNING: Do not use this product near water, may be connected to a telephone line. Excessive RENs on for example, in a wet basement or near a a telephone line may result in the devices not ringing in swimming pool. response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of WARNING: Avoid using this product during an the number of devices that may be connected to a line, as electrical storm. There may be a remote risk of determined by the total RENs, contact the local telephone electric shock from lightning. company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US: Q87DL01BX2000V2. The digits WARNING: This equipment will be inoperable represented by 01are the REN without a decimal point when main power fails. (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. WARNING: To ensure compliance with A plug and jack used to connect this equipment to the explosure limits to radiofrequency fields, the premises wiring and telephone network must comply antenna of the device should be no closer than with the applicable FCC Part 68 rules and requirements 20 cm from the body during use. adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. If your equipment causes harm to the telephone network, the telephone company may discontinue your service temporarily. If possible, they will notify you in advance. But if advance notice is not practical, you will be notified as soon as possible. You will be informed of your right to file a complaint with the FCC. Your telephone company may make changes in it is facilities, equipment, operations or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance to give you an opportunity to maintain uninterrupted telephone service. Wireless ADSL2+ Modem Router 19

Appendix C Regulatory Information Canada terminal. Cette conformité est confirmée par le numérod’enregistrement. Le sigle IC, placé devant le The following information applies if you use the product numéro d’enregistrement, signifie quel’enregistrement within Canada. s’est effectué conformément à une déclaration de conformité et indique queles spécifications techniques Industry Canada statement: d’Industrie Canada ont été respectées. Il n’implique pasqu’Industrie Canada a approuvé le matériel. This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: AVIS : L’indice d’équivalence de la sonnerie (IES) du (1) This device may not cause harmful interference, and présent matériel est de 01. L’IESassigné à chaque dispositif (2) this device must accept any interference received, terminal indique le nombre maximal de terminaux qui including interference that may cause undesired peuvent êtreraccordés à une interface téléphonique. operation. La terminaison d’une interface peut consister en unecombinaison quelconque de dispositifs, à la seule Ce dispositif est conforme à la norme CNR-210 d’Industrie condition que la somme d’indicesd’équivalence de la Canada applicable aux appareils radio exempts de licence. sonnerie de tous les dispositifs n’excède pas 5. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter Wireless Disclaimer tout brouillage reçu, y compris un brouillage susceptible The maximum performance for wireless is derived from de provoquer un fonctionnement indésirable. IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, IMPORTANT NOTE: data throughput rate, range and coverage. Performance Radiation Exposure Statement: depends on many factors, conditions and variables, including distance from the access point, volume of This equipment complies with IC radiation exposure limits network traffic, building materials and construction, set forth for an uncontrolled environment. This equipment operating system used, mix of wireless products used, should be installed and operated with minimum distance interference and other adverse conditions. 20cm between the radiator & your body. NOTE IMPORTANTE: (Pour l’utilisation de dispositifs mobiles) Avis de non-responsabilité concernant les appar- Déclaration d’exposition aux radiations: eils sans fil Cet équipement est conforme aux limites d’exposition Les performances maximales pour les réseaux sans fil aux rayonnements IC établies pour un environnement sont tirées des spécifications de la norme IEEE 802.11. non contrôlé. Cet équipement doit être installé et utilisé Les performances réelles peuvent varier, notamment avec un minimum de 20 cm de distance entre la source de en fonction de la capacité du réseau sans fil, du débit rayonnement et votre corps. de la transmission de données, de la portée et de la couverture. Les performances dépendent de facteurs, conditions et variables multiples, en particulier de la NOTICE: This equipment meets the applicable Industry distance par rapport au point d’accès, du volume du trafic Canada Terminal Equipment Technical Specifications. réseau, des matériaux utilisés dans le bâtiment et du This is confirmed by the registration number. The type de construction, du système d’exploitation et de la abbreviation, IC, before the registration number signifies combinaison de produits sans fil utilisés, des interférences that registration was performed based on a Declaration et de toute autre condition défavorable. of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is 01. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five. AVIS : Le présent matériel est conforme aux spécifications techniques d’Industrie Canadaapplicables au matériel 3425-01414 110310-10_20-10C-AI Wireless ADSL2+ Modem Router 20

www.linksys.com/support Cisco, the Cisco logo, and Linksys are trademarks or registered trademarks of Cisco and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or website are the property of their respective owners. © 2011 Cisco and/or its affiliates. All rights reserved.


Document Created: 2011-07-07 10:05:06
Document Modified: 2011-07-07 10:05:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC