RF Exposure Report

FCC ID: Q7Z-19H90R1

RF Exposure Info

Download: PDF
FCCID_4160503

@l Report Number: 1901FS16 SAR Exclusion Evaluation Report Applicant Mobile Action Technology Inc. Product Type Bluetooth 4.0 Low Energy Wristband Trade Name Q—Watch Model Number Q—90 Received Date Jan. 11, 2019 Test Period Jan. 23, 2019 Issue Date Jan. 28, 2019 Issue by Approved By : ‘:’;AIEOVL HU Tested By (Edison Hu) A Test Lab Techno Corp. No. 140—1, Changan Street, Bade District, Taoyuan City 33465, Taiwan (R.O.C) Tel : +886—3—2710188 / Fax : +886—3—2710190 Taiwan Accreditation Foundation accreditation number: 1330 Test Firm MRA designation number: TWOO10 Note: This report shall not be reproduced except in full, without the written approval of A Test Lab Techno Corp.. This document may be altered or revised by A Test Lab Techno Corp. personnel only, and shall be noted in. the revision section of the document. The client should not use it .to claim product endorsement by TAF, or any government agencies. The test results in the report only apply to the tested sample. 1 of 7

Report Number: 1901FS16 Revision History Rev. Issue Date Revisions Revised By 00 Jan. 28, 2019 Initial Issue Shelly Chen 2 of 7

Report Number: 1901FS16 Contents 1. Description of Equipment under Test (EUT) ....................................................................4 2. Reference Testing Standards ..........................................................................................4 3. SAR Test Exclusion .........................................................................................................5 3.1 Conducted Power ...............................................................................................6 3.2 Antenna Location ................................................................................................6 3.3 Evaluation Results ..............................................................................................7 3 of 7

Report Number: 1901FS16 1. Description of Equipment under Test (EUT) Mobile Action Technology Inc. Applicant 5F., No.205-3, Sec.3, Beishin Rd., Shindian City Taipei Taiwan 231 Heisei Technology Co., Ltd. Manufacturer 2F.,No.5,Aly.8,Ln.45.,Baoxing Rd.,Xindian Dist.,New Taipei City 231,Taiwan,R.O.C. Product Type Bluetooth 4.0 Low Energy Wristband Trade Name Q-Watch Model Number Q-90 FCC ID Q7Z-19H90R1 Frequency Range Operate Band Frequency Range (MHz) Bluetooth LE 2402 ~ 2480 Max. Gain Type Antenna Information (dBi) FPC Antenna -7.33 The above equipment was tested by A Test Lab Techno Corp. For compliance with the requirements set forth in 47 CFR § 2.1093. The results of testing in this report apply only to the product/system, which was tested. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. 2. Reference Testing Standards Standard Description Version American National Standard safety levels with respect to human ANSI/IEEE C95.1 exposure to radio frequency electromagnetic fields, 300 KHz to 100 1992 GHz, New York. IEEE Recommended Practice for Determining the Peak IEEE 1528 Spatial-Average Specific Absorption Rate (SAR) in the Human Head 2013 From Wireless Communications Devices: Measurement Techniques. FCC 47 CFR Part 2.1093 Radiofrequency radiation exposure evaluation: portable devices. --- SAR measurement 100 MHz to 6 GHz - describes SAR FCC KDB 865664 D01 measurement procedures for devices operating between 100 MHz to v01r04 6 GHz RF Exposure Reporting - provides general reporting requirements as FCC KDB 865664 D02 well as certain specific information required to support MPE and SAR v01r02 compliance. General RF Exposure Guidance - provides guidance pertaining to FCC KDB 447498 D01 RF exposure requirements for mobile and portable device equipment v06 authorizations. 4 of 7

Report Number: 1901FS16 3. SAR Test Exclusion As RF exposure evaluation of portable device, SAR test is not required when the evaluation results. According to KDB 447498 4.3.1, unless excluded by specific FCC test procedures, portable devices shall include SAR data for equipment approval. SAR test necessity will be based on the exclusion result. The test exclusion refers KDB 447498 as below: ≤50 mm: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR >50 mm and <200 mm: a) [Power allowed at numeric threshold for 50 mm in step 1) + (test separation distance - 50 mm)·( f(MHz)/150)] mW, at 100 MHz to 1500 MHz b) [Power allowed at numeric threshold for 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 5 of 7

@l Report Number: 1901516 3.1 Conducted Power The conducted power turn—up folerance, please reference manufacturer specifcation Operate Band |Modulation Type D(EhtAEbE:]te Frmf;}“y Ave’ffgr:]“w” 24020 10 Blustooth LE srek 1 2eso 0 as1 2seo 0 280 3.2. Antenna Location Transmitter and entenn imglementation Operate Band Bluetooth Antenns Bluetooth LE v Antenna to user distance Ant Used imm} Front Back Bluetooth Antenna s s Note We use a minimum distance of 5mm for blustooth function 6 of 7

Report Number: 1901FS16 3.3 Evaluation Results The evaluation of SAR test reduction according to KDB447498 SAR test is not required when the results showed “EXEMPT”. SAR test reduction Frequency Tune-Power Calculated threshold value Ant. Used Band (GHz) (dBm) (mW) Front Back Bluetooth 0.5 0.5 Bluetooth LE 2.48 2 1.585 Antenna EXEMPT EXEMPT Exclusion Considerations: SAR is not required Note: 1. Calculated Value include string "mW",that is meam through compare output power with threshold, if the output power more than threshold value the SAR test should be perform. Otherwise,the SAR test could be exempt. (> 50 mm) 2. Calculated Value only inculde number format, that is mean through compare output power with threshold, if the Calculated value more than 3, the SAR test should be perform. Otherwise, the SAR test could be exempt. (<50 mm) 3. When an antenna qualifies for the standalone SAR test exclusion of KDB 447498 section 4.3.1 and also transmits simultaneously with other antennas, the standalone SAR value must be estimated according to KDB 447498 section "4.3.2. Simultaneous transmission SAR test exclusion considerations b) ". 4. We used highest frequency and power, that result should be evaluated the worst case. 5. Power and distance are rounded to the nearest mW and mm before calculation. 6. The result is rounded to one decimal place for comparison. 7. We use a minimum distance of 5 mm for bluetooth function. 7 of 7


Document Created: 2019-08-30 01:13:41
Document Modified: 2019-08-30 01:13:41
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC