User Manual

FCC ID: Q7Z-17H68R1

Users Manual

Download: PDF
FCCID_3356104

EN Q-68HR Q-Band User Manual Device Overview Reversible Wristband Clasp Core Touch Button Metallic contact for charging Optical Sensor How to wear your Q-68HR? 1 Wear Q-68HR on your wrist 2 Fasten Q-68HR with clasp Put on the wristband with the screen facing up and the band wrapped Squeeze both clasps into the holes on the wristband until you hear a around your wrist. Slide one band through the loop of the other band, and click, indicating the band is securely fastened. align the clasp along the band to find the holes where best fit the clasps. Note: The watch band is replaceable and both side wearable/reversible. 3 Charge your Q-68HR 4 Change the wristband 1 1 2 3 2 To charge your Q-68HR, place it in the charging box at the 1. Spread open both bands with the screen facing up, and press down the screen other end of the USB cable. Close the box afterwards, and with your thumb until the core comes off the wristband. make sure the Q-68HR is securely covered. Plug the USB 2. Insert the core with screen facing up into the notch from below the wristband. connector to either a PC or power adapter to start charging. Make sure the two tenons on each side of the core are securely fixed into the corresponding slots in the bands. Important Notice: Failure to follow the instructions above might cause damage to the device.

Q-68HR Q-Band User Manual Get started with Q-68HR 1 Download and Install i-gotU Life app 2 Set up Q-68HR Please download i-gotU Life app from Google Play or the App Store Your Q-Band HR can be configured directly on the i-gotU Life app. and have it installed on your smartphone: First time setup: https://play.google.com/store/apps/details?id=com.mobileaction.ilife http://appstore.com/igotulife 1. Open the i-gotU Life app. 2. A Setup Wizard will be launched automatically. 3. Follow the on-screen instructions to proceed with more settings. Set up a new device from Settings: 1. Open the i-gotU Life app. Apk download: http://global.mobileaction.com/download/apk 2. Tap the app icon at the upper left corner to open function menu. 3. Choose Settings. Supported device 4. Tap Setup New Device under MORE DEVICE SETTINGS. • Any Android smartphone (v4.3 and up) with built-in 4.0 5. Follow the on-screen instructions to continue. Bluetooth connectivity; or • iPhone 4s and later models, iPad 2 and later models, Note and iPod Touch (all with iOS version 7.0 and up). • A complete list of supported smartphone or mobile Your personal information is used to calculate your Base Metabolic devices can be found at: Rate (BMR), which determines your calories burned. http://ww2.voiis.com/qband/devices.html 3 Start Using Q-68HR 4 Features of Q-68HR & i-gotU Life App 1. Switch between different function modes Silent Alarm 1. Tap the button twice to wake up the device screen. Silent alarm of Q-68HR gives you a wake-up alert via soft vibrations. 2. Long-press the button on the Q-68HR until you see 4 icons While in the sleep mode, the alarm can be dismissed by long-pressing on the screen for mode selection. the button on Q-68HR. By pressing the button once, the alarm will not 3. Tap the button twice to switch mode. be dismissed but alert you again in 5 minutes. Alarm settings can be 4. You’ll be entering the selected mode in 3 seconds. changed in: open i-gotU Life app > Menu > Silent Alarm. 2. Change display information Notification Information shown on the screen will vary as you press the You will be notified with incoming calls, SMS, E-Mail, or alerts from the button on the Q-68HR to toggle between screens. social apps via vibration. When notified about an incoming call on an Android smartphone, you may reject the call by long-pressing the 3. Q-68HR modes button on Q-68HR. Notification can be set up from: i-gotU Life App Daily mode: Analyzes your daily data, including steps taken Menu -> Notification. and calories burned. Sleep mode: Tracks your sleep pattern and quality. Online Help Android: http://ww2.voiis.com/igotu-life/help.html?language=en Sports mode: Starts a workout and displays information iOS: http://ww2.voiis.com/igotu-life/help.html?language=en&platform=ios including duration, steps taken, calories burned, and distance traveled during the workout. Manual download Nap mode: Awakes you via vibration after a short nap. http://www.mobileaction.com/download/Q-Band_download.jsp 4. Icon description Date Connection Status Current Mode Overall Progress (the average of Calories + Steps) Battery Status Heart Rate Important Notice WEEE 1. Please make sure your Q-68HR is fully charged when used for the first Note on environmental protection: time. It takes about 2 hours before it is fully charged. After the implementation of the European Directive 2002/96/EU in the 2. Please do not use under water. national legal system, the following applies: Electrical and electronic devices may not be disposed of with domestic 3. Please do not use any corrosive chemical to clean the device. Waste. Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up 4. The built-in Li-Polymer Battery might be damaged if it remains low for this purpose or point of sale. Details to this are defined by the national voltage for a long time. It is suggested that you charge the battery once law of the respective country. This symbol on the product, the instruction every three months to prolong the battery's lifetime, even though you manual or the package indicates that a product is subject to these don't use the device very often or do not plan to use it for a while. regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting our environment.

Q-68HR Q-Band User Manual Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operating temperature:-10° to 65°C (14° to 149°F) Charging temperature:0° to 45°C (32° to 113°F) Power input type:DC 5V USB cable Battery type:Rechargeable Li-Poly, 3.7 Vdc Input:Maximum DC 5V, 0.1A


Document Created: 2017-03-17 14:22:34
Document Modified: 2017-03-17 14:22:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC