test report

FCC ID: Q7Z-14030R1

Test Report

Download: PDF
FCCID_2104684

FCC 47 CFR PART 15 SUBPART C TEST REPORT For Applicant: Mobile Action Technology Inc. 5F., No. 205-2, Sec. 3, Beixin Rd., Xindian Dist., New Taipei City Address: 23143, Taiwan Product Name: Pedometer Model Name: POD-30, POD-30x, POD-30a, POD-30c, POD-30e, POD-30g Brand Name: i-gotU FCC ID: Q7Z-14030R1 Report No.: STS130909F1 Date of Issue: October 21, 2013 Issued by: Shenzhen Super Test Service Technology Co., Ltd. No.5, Langshan 2nd Road, North District, Hi-tech Industrial Park, Address : Nanshan, Shenzhen, Guangdong, China Tel : 86-755-27958522 Fax : 86-755-27958022 The report consists 30 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by STS. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver.

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY..................................................................................................... 4 2. GENERAL INFORMATION.................................................................................................................... 5 2.1 Product Information...............................................................................................................................5 2.2 Objective.................................................................................................................................................6 2.3 Test Standards and Results.................................................................................................................6 2.4 Environmental Conditions.................................................................................................................... 6 2.5 MEASUREMENT UNCERTAINTY..................................................................................................... 6 3. TEST FACILITY....................................................................................................................................... 7 3.1TEST FACILITY...................................................................................................................................... 7 3.2 Test Conditions...................................................................................................................................... 7 3.3 Description of Test Modes....................................................................................................................8 3.4 Table of Parameters of Text Software Setting.................................................................................. 8 3.5 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS..................................................... 9 4. SETUP OF EQUIPMENT UNDER TEST.......................................................................................... 10 4.1 SUPPORT EQUIPMENT................................................................................................................... 10 4.2 TEST EQUIPMENT LIST................................................................................................................... 11 5. 47 CFR Part 15C 15.249 Requirements........................................................................................... 12 5.1 Spurious Emission Test......................................................................................................................12 5.1.1 Requirement..................................................................................................................................... 12 5.1.2 Test Description................................................................................................................................13 5.1.3 Test Description................................................................................................................................14 5.1.5 Test Result.................................................................................................................................... 15 5.2 Band Edge........................................................................................................................................... 21 5.2.1 Requirement..................................................................................................................................... 21 5.2.2 Test Description................................................................................................................................21 5.2.3Test Result......................................................................................................................................... 21 5.3 LINE CONDUCTED EMISSION TEST............................................................................................24 5.3.1. LIMITS OF LINE CONDUCTED EMISSION TEST...................................................................24 5.3.2. BLOCK DIAGRAM OF TEST SETUP......................................................................................... 24 5.3.3. PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST..........................25 5.3.4. FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST..........................................25 5.3.5. Test result.........................................................................................................................................25 5.4 20 dB Bandwidth................................................................................................................................. 26 5.4.1 Definition........................................................................................................................................... 26 5.4.2 Block Diagram Of Test Setup.........................................................................................................26 5.4.3 Test Result........................................................................................................................................ 26 Page 2 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 APPENDIX 1.............................................................................................................................................. 28 PHOTOGRAPHS OF TEST SETUP.......................................................................................................28 Page 3 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 1. VERIFICATION OF CONFORMITY Equipment Under Test: Pedometer Brand Name: i-gotU Model Number: POD-30 Series Number: POD-30x, POD-30a, POD-30c, POD-30e, POD-30g Description of Differences: The same PCB, only the model name is different. FCC ID: Q7Z-14030R1 Applicant: Mobile Action Technology Inc. 5F., No. 205-2, Sec. 3, Beixin Rd., Xindian Dist., New Taipei City 23143, Taiwan Manufacturer: Heisei Electronics Co., Ltd. 2F, No. 5, Alley 8, Lane 45, Pao Hsin Road, Hsin-Tien City, Taipei Hsien, Taiwan, R.O.C. Technical Standards: 47 CFR Part 15 Subpart C File Number: STS130909F1 Date of test: October 10,2013-October 21, 2013 Deviation: None Condition of Test Sample: Normal Test Result: PASS The above equipment was tested by STS for compliance with the requirements set forth in FCC rules and the Technical Standards mentioned above. This said equipment in the configuration described in this report shows the maximum emission levels emanating from equipment and the level of the immunity endurance of the equipment are within the compliance requirements. The test results of this report relate only to the tested sample identified in this report. Tested by (+ signature): Zhang Ling October 21, 2013 Review by (+ signature): July Wen October 21, 2013 Approved by (+ signature): Terry Yang October 21, 2013 Page 4 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 2. GENERAL INFORMATION 2.1 Product Information Product: Pedometer Trade Name: i-gotU Model Number: POD-30 Power Supply: TX: DC 3V by battery Frequency Range: 2402MHz -2480MHz Modulation Type: GFSK Antenna Type: Internal Fixed Antenna Gain: 2dBi Channel Spacing: 2MHz Channel Number: 40 Temperature Range: -10°C ~ 50°C NOTE: 1. For a more detailed features description about the EUT, please refer to User’s Manual. 2. The EUT can be tested in a Horizontal or Vertical position. Page 5 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 2.2 Objective Perform FCC Part 15 Subpart C tests for FCC Marking. 2.3 Test Standards and Results Test items and the results are as bellow: No. Section Description Result Date of Test 1 15.249(a) Spurious Emission PASS 2013-10-15 2 15.249(a) Band Edge PASS 2013-10-15 3 15.207 Power Line Conducted Emission Test Not Applicable -- 4 15.249 20dB Bandwidth PASS 2013-10-15 Note: 1. The test result judgment is decided by the limit of measurement standard 2. The information of measurement uncertainty is available upon the customer’s request. 2.4 Environmental Conditions During the measurement the environmental conditions were within the listed ranges: - Temperature: 15-35ºC - Humidity: 30-60 % - Atmospheric pressure: 86-106 kPa 2.5 MEASUREMENT UNCERTAINTY The uncertainty is calculated using the methods suggested in the “Guide to the Expression of Uncertainty in Measurement” (GUM) published by ISO. The report uncertainty of measurement y±U, where expended uncertainly U is based on a standard uncertainty multiplied by a coverage factor of k=2,Providing a level of confidence of approximately 95% - Uncertainty of Conducted Emission, Uc = ±1.8dB - Uncertainty of Radiated Emission, Uc = ±3.2dB Page 6 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 3. TEST FACILITY 3.1TEST FACILITY Test Site: Most Technology Service Co., Ltd. Location: No.5, Langshan 2nd Rd., North Hi-Tech Industrial park, Nanshan, Shenzhen, Guangdong ,China Description: There is one 3m semi-anechoic an area test sites and two line conducted labs for final test. The Open Area Test Sites and the Line Conducted labs are constructed and calibrated to meet the FCC requirements in documents ANSI C63.4:2009 and CISPR 16 requirements. The FCC Registration Number is 490827. The IC Registration Number is 46405-7103. The CNAS Registration Number is CNAS L3573. Site Filing: The site description is on file with the Federal Communications Commission, 7435 Oakland Mills Road, Columbia, MD 21046. Instrument Tolerance: All measuring equipment is in accord with ANSI C63.4:2009 and CISPR 16 requirements that meet industry regulatory agency and accreditation agency requirement. Ground Plane: Two conductive reference ground planes were used during the Line Conducted Emission, one in vertical and the other in horizontal. The dimensions of these ground planes are as below. The vertical ground plane was placed distancing 40 cm to the rear of the wooden test table on where the EUT and the support equipment were placed during test. The horizontal ground plane projected 50 cm beyond the footprint of the EUT system and distanced 80 cm to the wooden test table. For Radiated Emission Test, one horizontal conductive ground plane extended at least 1m beyond the periphery of the EUT and the largest measuring antenna, and covered the entire area between the EUT and the antenna. 3.2 Test Conditions The EUT has been tested under normal operating（TX）and standby（RX）condition. The field strength of radiation emission was measured in the following position: EUT stand-up position (Y axis), lie-down position (X, Z axis). The following data show only with the worst case setup. The worst case of Y axis was reported. Based on client request, all normal using modes of the normal function were tested but only the worst test data of the worst mode is reported by this report. Page 7 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 3.3 Description of Test Modes To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have effect on EMI emission level, Each of these EUT operation mode(s) or test configuration mode(s) mentioned above was evaluated respectively Pre-test Mode Description Mode 1 GFSK CH01/CH21/CH40 Note: The measurements are performed at the highest, middle, lowest available channels. The measurements are performed at all bit rate of transmitter, the worst data was reported. 3.4 Table of Parameters of Text Software Setting During testing channel & power controlling software provided by the customer was used to control the operating channel as well as the output power level, the RF output power selection is for the setting of RF output power expected by the customer and is going to be fixed on the firmware of the final end product power parameters of Bluetooth. Test software Version Test channels GFSK Mode 2402MHz 2442MHz 2480MHz Radiated Emissions The EUT is placed on a turn table, which is 0.8 m above ground plane. The turntable shall rotate 360 degrees to determine the position of maximum emission level. EUT is set 3m away from the receiving antenna, which varied from 1m to 4m to find out the highest emission. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. In order to find out the maximum emissions, exploratory radiated emission measurements were made according to the requirements in Section 13.1.4.1 of ANSI C63.4:2009. Page 8 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 3.5 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS (a) Except as shown in paragraph (d) of this section, only spurious emissions are permitted in any of the frequency bands listed below: MHz MHz MHz GHz 0.090 - 0.110 16.42 - 16.423 399.9 - 410 4.5 - 5.15 1 0.495 - 0.505 16.69475 - 16.69525 608 - 614 5.35 - 5.46 2.1735 - 2.1905 16.80425 - 16.80475 960 - 1240 7.25 - 7.75 4.125 - 4.128 25.5 - 25.67 1300 - 1427 8.025 - 8.5 4.17725 - 4.17775 37.5 - 38.25 1435 - 1626.5 9.0 - 9.2 4.20725 - 4.20775 73 - 74.6 1645.5 - 1646.5 9.3 - 9.5 6.215 - 6.218 74.8 - 75.2 1660 - 1710 10.6 - 12.7 6.26775 - 6.26825 108 - 121.94 1718.8 - 1722.2 13.25 - 13.4 6.31175 - 6.31225 123 - 138 2200 - 2300 14.47 - 14.5 8.291 - 8.294 149.9 - 150.05 2310 - 2390 15.35 - 16.2 8.362 - 8.366 156.52475 - 156.52525 2483.5 - 2500 17.7 - 21.4 8.37625 - 8.38675 156.7 - 156.9 2655 - 2900 22.01 - 23.12 8.41425 - 8.41475 162.0125 - 167.17 3260 - 3267 23.6 - 24.0 12.29 - 12.293 167.72 - 173.2 3332 - 3339 31.2 - 31.8 12.51975 - 12.52025 240 - 285 3345.8 - 3358 36.43 - 36.5 12.57675 - 12.57725 322 - 335.4 3600 - 4400 (2) 13.36 - 13.41 1 Until February 1, 1999, this restricted band shall be 0.490-0.510 MHz. 2 Above 38.6 (b) Except as provided in paragraphs (d) and (e), the field strength of emissions appearing within these frequency bands shall not exceed the limits shown in Section 15.209. At frequencies equal to or less than 1000 MHz, compliance with the limits in Section 15.209 shall be demonstrated using measurement instrumentation employing a CISPR quasi- peak detector. Above 1000 MHz, compliance with the emission limits in Section 15.209 shall be demonstrated based on the average value of the measured emissions. The provisions in Section 15.35 apply to these measurements. Page 9 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 4. SETUP OF EQUIPMENT UNDER TEST 4.1 SUPPORT EQUIPMENT Device Type Manufacturer Model Name Serial No. Data Cable Power Cable --- --- --- --- --- Remark: All the equipment/cables were placed in the worst-case configuration to maximize the emission during the test. Grounding was established in accordance with the manufacturer’s requirements and conditions for the intended use. Page 10 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 4.2 TEST EQUIPMENT LIST Instrumentation: The following list contains equipment used at Most for testing. The equipment conforms to the CISPR 16-1 / ANSI C63.2 Specifications for Electromagnetic Interference and Field Strength Instrumentation from 10 kHz to 1.0 GHz or above. Calculator Calculator No. Equipment Manufacturer Model No. S/N date Interval 1 Test Receiver Rohde & Schwarz ESCI 100492 2013/03/06 1 Year 2 L.I.S.N. Rohde & Schwarz ENV216 100093 2013/03/14 1 Year 3 Coaxial Switch Anritsu Corp MP59B 6200283933 2013/03/14 1 Year 4 Terminator Hubersuhner 50Ω No.1 2013/03/14 1 Year 5 RF Cable SchwarzBeck N/A No.1 2013/03/14 1 Year 6 Test Receiver Rohde & Schwarz ESPI 101202 2013/03/06 1 Year 7 Bilog Antenna SCHWARZBECK BBHA9120D D69250 2013/03/06 1 Year 8 Test Antenna - Horn Schwarzbeck BBHA 9120C -- 2013/03/06 1 Year 9 Test Antenna - LOOP Schwarzbeck VULB 9163 -- 2013/03/06 1 Year 10 Cable Resenberger N/A NO.1 2013/03/14 1 Year 11 Cable SchwarzBeck N/A NO.2 2013/03/14 1 Year 12 Cable SchwarzBeck N/A NO.3 2013/03/14 1 Year 13 DC Power Filter DuoJi DL2´30B N/A 2013/03/14 1 Year Single Phase Power 14 DuoJi FNF 202B30 N/A 2013/03/14 1 Year Line Filter 3 Phase Power Line 15 DuoJi FNF 402B30 N/A 2013/03/14 1 Year Filter 16 Test Receiver Rohde & Schwarz ESCI 100492 2013/03/06 1 Year 17 Absorbing Clamp Luthi MDS21 3635 2013/03/14 1 Year 18 Coaxial Switch Anritsu Corp MP59B 6200283933 2013/03/14 1 Year 19 AC Power Source Kikusui AC40MA LM003232 2013/03/14 1 Year 20 Test Analyzer Kikusui KHA1000 LM003720 2013/04/20 1 Year Line Impendence LIN40MA- 21 Kikusui LM002352 2013/03/14 1 Year Network PCR-L 22 ESD Tester Kikusui KES4021 LM003537 2013/03/14 1 Year 23 EMCPRO System EM Test UCS-500-M4 V0648102026 2013/03/14 1 Year 24 Signal Generator IFR 2032 203002/100 2013/04/20 1 Year 25 Amplifier A&R 150W1000 301584 2013/03/14 1 Year 26 CDN FCC FCC-801-M2-25 47 2013/03/14 1 Year 27 CDN FCC FCC-801-M3-25 107 2013/03/14 1 Year 28 EM Injection Clamp FCC F-203I-23mm 403 2013/03/14 1 Year 29 RF Cable MIYAZAKI N/A No.1/No.2 2013/03/14 1 Year Universal Radio 30 ROHDE&SCHWARZ CMU200 0304789 2013/03/06 1 Year Communication Tester Telecommunication 31 European Antennas PSA 75301R/170 0304213 2013/04/20 1 Year Antenna 32 Loop Antenna ARA PLA-1030/B 1029 2013/03/06 1 Year NOTE: Equipments listed above have been calibrated and are in the period of validation. Page 11 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 5. 47 CFR Part 15C 15.249 Requirements 5.1 Spurious Emission Test 5.1.1 Requirement According to FCC section 15.249(a): Except as provided in paragraph (a) of this section, the field strength of emissions from intentional radiators operated within these frequency bands shall comply with the following: Fundamental Frequency Field Strength of Fundamental Field Strength of Harmonics (MHz) (mV/m) (µV/m) 902-928 50 500 2400-2483.5 50 500 5725-5875 50 500 24000-24250 250 2500 According to FCC section 15.109 (a), except as provided elsewhere in this subpart, the emissions from an intentional radiator shall not exceed the field strength levels specified in the following table: Frequency (MHz) Field Strength (µV/m) Measurement Distance (m) 1.705 – 30.0 30 30 30 – 88 100 3 88 – 216 150 3 216 – 960 200 3 Above 960 500 3 Remark: Except as provided in paragraph (g), fundamental emissions from intentional radiators operating under this Section shall not be located in the frequency bands 54- 72 MHz, 76- 88 MHz, 174- 216 MHz or 470- 806 MHz. However, operation within these frequency bands is permitted under other sections of this Part, e.g., Sections 15.231 and 15.241. In the above emission table, the tighter limit applies at the band edges. Frequency (MHz) Field Strength (µV/m) Measurement Distance (m) 30 – 88 100 3 88 – 216 150 3 216 – 960 200 3 Above 960 500 3 Page 12 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 5.1.2 Test Description Test Setup: From 9KHz to 30MHz: Antenna tower Loop EUT antenna 4m Spectrum analyzer Turntable 0.8m 1m Reference Ground plane From 30MHz to 1GHz: Antenna tower 3m Bi-log antenna EUT 4m Spectrum analyzer Turntable 1m 0.8m Reference ground plane Page 13 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 Above 1GHz: Antenna tower 3m Horn antenna EUT 4m Spectrum analyzer Turntable 1m 0.8m Pre-amp 5.1.3 Test Description 1. The EUT is placed on a turntable, which is 0.8m above ground plane. 2. The turntable shall be rotated for 360 degrees to determine the position of maximum emission level. 3. EUT is set 3m away from the receiving antenna, which is varied from 1m to 4m to find out the highest emissions. 4. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 5. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 6. Set the spectrum analyzer in the following setting as: Below 1GHz: RBW=100 kHz / VBW=300 kHz / Sweep=AUTO Above 1GHz / a) PEAK: RBW=VBW=1MHz / Sweep=AUTO AVERAGE: RBW=1MHz / VBW=10Hz / Sweep=AUTO 7. Repeat above procedures until the measurements for all frequencies are complete. Page 14 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 5.1.4 Test Result From 9 KHz to 30MHz: Freq. Ant. Pol Peak AV Ant. / CL Peak AV AV Actual Fs (MHz) H/V Reading Reading CF Limit Limit Margin (dBuV) (dBuV) (dB) Peak AV (dBuV/m) (dBuV/m) (dB) (dBuV/m) (dBuV/m) N/A H >20 N/A V >20 Notes: Data of measurement within this frequency range shown “--- ” in the table above means the reading of emissions are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. From 30MHz to 1GHz: The following test mode(s) were scanned during the preliminary test: Preliminary Radiated Emission Test Frequency Range Investigated 9KHz TO 26 GHz Mode of operation Date Report No. Data# Worst Mode Bluetooth Mode 2013-10-10 STS130909F1 1_(V, H) Note: The Bluetooth model was carried out for GFSK modulation types, The test data was shown on the summary data page. Page 15 of 30

C actess No 5tm an . NothM—Technsutra pac Guzmozera Chre amusrmam Tacorssasizous rac orsssstruto Radatd EnisionMeasrement mmio sen cemnos mace vam — «|_I —————————<3—— » m war on ce se e weer oo en m ew S wewost m Fencaion: verka Temie m lime oc ratis au Rasaten Pore cov near us EuT Pedonetr ootoce um rooso Hose: Buetoan Nee nm rwa Ragn: Nlow" Gosd waige Yaite cnad‘ lint our Rrara To Hegn_Doree w ay a m an a Gne n n tomn 7 im on na ns o% ns me z e o on in n oem mex 7 m in on m me l sn 1—man cu ma un sn ie se s un in —ne hn sn ue mm s ~sasn se on wer mm s jon *Maimum aas xOreimt. Ternagn

C actess No 5tm an . NothM—Technsutra pac Guzmozera Chre amusrmam Tacorssasizous rac orsssstruto Radatd EnisionMeasrement tw can cemnos mnoe vam — » m war w e m en se oo m m n w S wewost m Feaman. verrmor Tamue s lime oc ratis au Rasaten Pone Dcav hear es EuT Pedonetr ootoce um rooso Hose: Buetoan Nee Five Ragn: Level Gosd Facte waige Rrara To mo m nere lint over Hept cape w ay a m an a Gne n n tomn 7 on in 15— m a= 3 e z m in w an o aue sn 7 mm in n= aa n m se 7—smun sn ma m m e s s rawa sn Bs sn e 63 n s ~auam on ho s mm ol jon *Maimum aas xOreimt. Ternagn

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 Above 1 GHz Operation Mode: GFSK Mode/CH Low Test Date: October 15,2013 Temperature: 20oC Tested by: Sky Guo Humidity: 70 % RH Polarity: Ver. / Hor. Freq. Ant. Pol Peak AV Ant. / CL Peak AV AV Actual Fs (MHz) H/V Reading Reading CF Limit Limit Margin (dBuV) (dBuV) (dB) Peak AV (dBuV/m) (dBuV/m) (dB) (dBuV/m) (dBuV/m) 2402.01 H 83.65 68.18 19.08 102.73 87.26 114.00 94.00 -6.74 4804.05 H 47.26 24.39 23.13 70.39 47.52 74.00 54.00 -6.48 N/A >20 2402.01 V 86.50 69.66 19.08 105.58 88.74 114.00 94.00 -5.26 4804.02 V 46.20 24.69 23.13 69.33 47.82 74.00 54.00 -6.18 N/A >20 Notes: 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Measurements above show only up to 6 maximum emissions noted, or would be lesser if no specific emissions from the EUT are recorded (ie: margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 3. Radiated emissions measured in frequency above 1000MHz were made with an instrument using Peak detector mode and average detector mode of the emission shown in Actual FS column. 4. Spectrum setting: a. Peak Setting 1GHz - 26GHz, RBW = 1MHz, VBW = 1MHz, Sweep time = 200 ms. b. AV Setting 1GH z- 26GHz, RBW = 1MHz, VBW = 10Hz, Sweep time = 200 ms. 5. The EUT was test in a vertical position. Page 18 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 Operation Mode: GFSK Mode/CH Mid Test Date: October 15,2013 Temperature: 20oC Tested by: Sky Guo Humidity: 70 % RH Polarity: Ver. / Hor. Freq. Ant. Pol Peak AV Ant. / CL Peak AV AV Actual Fs (MHz) H/V Reading Reading CF Limit Limit Margin (dBuV) (dBuV) (dB) Peak AV (dBuV/m) (dBuV/m) (dB) (dBuV/m) (dBuV/m) 2442.01 H 85.37 68.40 19.12 104.49 87.52 114.00 94.00 -6.48 4884.02 H 46.02 24.07 24.09 70.11 48.16 74.00 54.00 -5.84 N/A >20 2442.01 V 77.55 68.85 19.12 104.88 87.97 114.00 94.00 -6.03 4884.02 V 45.50 24.25 24.09 69.59 48.34 74.00 54.00 -5.66 N/A >20 Notes: 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Measurements above show only up to 6 maximum emissions noted, or would be lesser if no specific emissions from the EUT are recorded (ie: margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 3. Radiated emissions measured in frequency above 1000MHz were made with an instrument using Peak detector mode and average detector mode of the emission shown in Actual FS column. 4. Spectrum setting: a. Peak Setting 1GHz - 26GHz, RBW = 1MHz, VBW = 1MHz, Sweep time = 200 ms. b. AV Setting 1GH z- 26GHz, RBW = 1MHz, VBW = 10Hz, Sweep time = 200 ms. 5. The EUT was test in a vertical position. Page 19 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 Operation Mode: GFSK Mode/CH High Test Date: October 15,2013 Temperature: 20oC Tested by: Sky Guo Humidity: 70 % RH Polarity: Ver. / Hor. Freq. Ant. Pol Peak AV Ant. / CL Peak AV AV Actual Fs (MHz) H/V Reading Reading CF Limit Limit Margin (dBuV) (dBuV) (dB) Peak AV (dBuV/m) (dBuV/m) (dB) (dBuV/m) (dBuV/m) 2480.01 H 82.68 65.27 22.15 104.83 87.42 114.00 94.00 -6.58 4960.05 H 44.66 23.65 24.13 68.79 47.78 74.00 54.00 -6.22 N/A >20 2480.01 V 82.52 66.43 22.15 104.67 88.58 114.00 94.00 -5.42 4960.05 V 44.51 24.55 24.13 68.64 48.68 74.00 54.00 -5.32 N/A >20 Notes: 1. Measuring frequencies from 1 GHz to the 10th harmonic of highest fundamental frequency. 2. Measurements above show only up to 6 maximum emissions noted, or would be lesser if no specific emissions from the EUT are recorded (ie: margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 3. Radiated emissions measured in frequency above 1000MHz were made with an instrument using Peak detector mode and average detector mode of the emission shown in Actual FS column. 4. Spectrum setting: a. Peak Setting 1GHz - 26GHz, RBW = 1MHz, VBW = 1MHz, Sweep time = 200 ms. b. AV Setting 1GH z- 26GHz, RBW = 1MHz, VBW = 10Hz, Sweep time = 200 ms. 5. The EUT was test in a vertical position. Page 20 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 5.2 Band Edge 5.2.1 Requirement According to FCC section 15.249(a), in any 100kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20dB below that in the 100kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement. 5.2.2 Test Description Antenna tower 3m Horn antenna EUT 4m Spectrum analyzer Turntable 1m 0.8m Pre-amp 5.2.3Test Result The EUT operates at hopping-off test mode. The lowest and highest channels are tested to verify the band edge emissions. GFSK Modulation Mode: Test Result PEAK- Highest Emission AV-Highest Emission (dBuv/m) (dBuv/m) CH Horizontal Vertical Horizontal Vertical 51.59 67.42 32.43 48.25 CH LOW 52.62 68.55 31.58 49.47 63.49 52.83 34.38 31.71 CH High 62.70 52.93 31.66 31.88 Test Plot: Page 21 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 (CH Low, Horizontal, Peak) (CH Low, Vertical, Peak) Page 22 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 (CH High, Horizontal, Peak) (CH High, Vertical, Peak) Page 23 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 5.3 LINE CONDUCTED EMISSION TEST 5.3.1. LIMITS OF LINE CONDUCTED EMISSION TEST Maximum RF Line Voltage Frequency Q.P.( dBuV) Average( dBuV) 150kHz-500kHz 66-56 56-46 500kHz-5MHz 56 46 5MHz-30MHz 60 50 **Note: 1. the lower limit shall apply at the transition frequency. 2. The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.50 MHz 5.3.2. BLOCK DIAGRAM OF TEST SETUP Communication 40cm 80cm Antenna EUT >80cm 80cm LISN Receiver System Simulator Page 24 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 5.3.3. PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST 1) The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. When the EUT is a tabletop system, a wooden table with a height of 0.8 meters is used and is placed on the ground plane as per FCC Part 15 (see Test Facility for the dimensions of the ground plane used). When the EUT is floor-standing equipment, it is placed on the ground plane which has a 3-12 mm non-conductive covering to insulate the EUT from the ground plane. 2) Support equipment, if needed, was placed as per FCC Part 15. 3) All I/O cables were positioned to simulate typical actual usage as per FCC Part 15. 4) The EUT received DC 18V by Adapter which received AC120V/60Hz power through a Line Impedance Stabilization Network (LISN) which supplied power source and was grounded to the ground plane. 5) All support equipments received power from a second LISN supplying power of AC 120V/60Hz, if any. 6) The EUT test program was started. Emissions were measured on each current carrying line of the EUT using a spectrum Analyzer / Receiver connected to the LISN powering the EUT. The LISN has two monitoring points: Line 1 (Hot Side) and Line 2 (Neutral Side). Two scans were taken: one with Line 1 connected to Analyzer / Receiver and Line 2 connected to a 50 ohm load; the second scan had Line 1 connected to a 50 ohm load and Line 2 connected to the Analyzer / Receiver. 7) Analyzer / Receiver scanned from 150 kHz to 30 MHz for emissions in each of the test modes. 8) During the above scans, the emissions were maximized by cable manipulation. 5.3.4. FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST EUT and support equipment was set up on the test bench as per step 9 of the preliminary test. A scan was taken on both power lines, Line 1 and Line 2, recording at least the six highest emissions. Emission frequency and amplitude were recorded into a computer in which correction factors were used to calculate the emission level and compare reading to the applicable limit. If EUT emission level was less –2dB to the A.V. limit in Peak mode, then the emission signal was re-checked using Q.P and Average detector. 5.3.5. Test result Not Applicable ( The EUT power is battery). Page 25 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 5.4 20 dB Bandwidth 5.4.1 Definition Intentional radiators operating under the alternative provisions to the general emission limits, as Contained in §§15.217 through 15.257 and in sub-part E of this part, must be designed to ensure that the 20 dB Bandwidth of the emission, or whatever bandwidth may otherwise be specified in the specific Rule section under which the equipment operates, is contained within the frequency band designated in the rule section under which the equipment is operated. 5.4.2 Block Diagram Of Test Setup The EUT is powered by the Battery, is coupled to the Spectrum Analyzer (SA) through the Attenuator/DC Block. The path loss as the factor is calibrated to correct the reading. During the measurement, the EUT is activated and is set to operate at maximum power. The RF load attached to the EUT antenna terminal is 50Ohm. Attenuator & EUT DC Block Spectrum Analyzer TX 5.4.3 Test Result GFSK Modulation test result: CH Low Page 26 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 CH MID CH High Page 27 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 APPENDIX 1 PHOTOGRAPHS OF TEST SETUP Page 28 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 CONDUCTED TEST SETUP RE TEST SETUP Page 29 of 30

FCC ID:Q7Z-14030R1 Report No.: STS130909F1 ------END OF REPORT------ Page 30 of 30


Document Created: 2013-10-29 18:31:03
Document Modified: 2013-10-29 18:31:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC