190705027RFC-2_MPE_REPORT

FCC ID: Q639560N

RF Exposure Info

Download: PDF
FCCID_4455239

Uni#nTrust Page 1 of 9 Report No.: 190705027RFC—2 RF EXPOSURE EVALUATION REPORT Product Name: Iridium GO! Trade Mark: Iridium Model No.: 9560N Report Number: 190705027RFC—2 Test Standards: FCC 47 CFR Part 1 Subpart I FCC ID: Q639560N Test Result: PASS Date of Issue: September 16, 2019 Prepared for: Iridium Satellite LLC 1750 Tysons Boulevard Suite 1400, McLean, VA 22102, United States Prepared by: Shenzhen UnionTrust Quality and Technology Co., Ltd. 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China TEL: +86—755—2823 0888 FAX: +86—755—2823 0886 Prepared by: e\ _ls Reviewed by: 4// ~~ se HenryEio Kevin Liang Team Leader\\, Assistant Manager Approved by: Date: September 16, 2019 Technical Director Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua NewDistrict, Shenzhen, China Tel: +86—755—28230888 Fax: +86—755—28230886 E—mail: info@uttlab.com Hitp: wwwuttlab.com

Page 2 of 9 Report No.: 190705027RFC-2 Version Version No. Date Description V1.0 September 16, 2019 Original Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 3 of 9 Report No.: 190705027RFC-2 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 1.1 CLIENT INFORMATION ........................................................................................................................................ 4 1.2 EUT INFORMATION ............................................................................................................................................ 4 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD ................................................................................. 4 1.4 OTHER INFORMATION ......................................................................................................................................... 5 1.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................................................... 5 1.6 DEVIATION FROM STANDARDS ............................................................................................................................ 5 1.7 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 5 1.8 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 5 2. EQUIPMENT LIST .................................................................................................................................................... 5 3. MPE EVALUATION ................................................................................................................................................... 6 3.1 REFERENCE DOCUMENTS FOR EVALUATION ........................................................................................................ 6 3.2 MPE COMPLIANCE REQUIREMENT ..................................................................................................................... 6 3.2.1 LIMITS ................................................................................................................................................... 6 3.3 MPE CALCULATION METHOD ............................................................................................................................. 7 3.4 MPE CALCULATION RESULTS ............................................................................................................................ 7 3.4.1 FOR WLAN ........................................................................................................................................... 7 3.4.2 FOR SATELLITE ...................................................................................................................................... 7 3.5 SIMULTANEOUS MULTI-BAND TRANSMISSION MPE ANALYSIS .............................................................................. 8 APPENDIX 1 PHOTOS OF TEST SETUP ....................................................................................................................... 9 APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS ................................................................................... 9 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 4 of 9 Report No.: 190705027RFC-2 1. GENERAL INFORMATION 1.1 CLIENT INFORMATION Applicant: Iridium Satellite LLC Address of Applicant: 1750 Tysons Boulevard Suite 1400, McLean, VA 22102, United States Manufacturer: Beam Communications Address of Manufacturer: Unit 5/8 Anzed Court, Mulgrave, Victoria, Australia 3710 1.2 EUT INFORMATION Product Name: Iridium GO! Model No. / HVIN: 9560N Trade Mark: Iridium DUT Stage: Identical Prototype 2.4 GHz ISM Band: IEEE 802.11b EUT Supports Function: MSS frequency 1 610 MHz to 1 626.5 MHz band(s): Sample Received Date: July 5, 2019 Sample Tested Date: July 5, 2019 to August 5, 2019 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD MSS frequency bands: 1 610 MHz to 1 626.5 MHz Frequency Range: 1616.020833 MHz to 1625.979167 MHz Channel Separation: 41.667 kHz Antenna Type: Integral Antenna Antenna Gain: 1.6 dBi ☒ Handheld, Equipment Category: ☐ other than handheld Maximum TX power 36.8 dBm For 2.4 GHz ISM Band of Wi-Fi Frequency Band: 2400 MHz to 2483.5 MHz Frequency Range: 2412 MHz to 2462 MHz Support Standards: IEEE 802.11b Type of Modulation: IEEE 802.11b: DSSS(CCK, DQPSK, DBPSK) Data Rate: IEEE 802.11b: Up to 11 Mbps Number of Channels: IEEE 802.11b: 11 Channel Separation: 5 MHz Antenna Type: Integral Antenna Antenna Gain: 0.5 dBi Maximum Peak Power: IEEE 802.11b: 19.15dBm Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 5 of 9 Report No.: 190705027RFC-2 1.4 OTHER INFORMATION Test RF Channel Lists Frequency Band Lowest Middle Highest 1 610 MHz to 1 626.5 MHz 1616.020833 MHz 1621.020833 MHz 1625.979167 MHz Test channels for 2.4 GHz ISM Band of Wi-Fi Test RF Channel Lists Mode Tx/Rx Frequency Lowest(L) Middle(M) Highest(H) Channel 1 Channel 6 Channel 11 IEEE 802.11b 2412 MHz to 2462 MHz 2412 MHz 2437 MHz 2462 MHz 1.5 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF product, according to the specifications of the manufacturers. It must comply with the requirements of the following standards: FCC 47 CFR Part 1 Subpart I All test items have been performed and recorded as per the above standards 1.6 DEVIATION FROM STANDARDS None. 1.7 ABNORMALITIES FROM STANDARD CONDITIONS None. 1.8 OTHER INFORMATION REQUESTED BY THE CUSTOMER None. 2. EQUIPMENT LIST Please refer to the RF test report: (Document 75932207 Report 07 Issue 3) & 266892-1. Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 6 of 9 Report No.: 190705027RFC-2 3. MPE EVALUATION 3.1 REFERENCE DOCUMENTS FOR EVALUATION No. Identity Document Title PROCEDURES IMPLEMENTING THE NATIONAL 1 FCC 47 CFR Part 1 Subpart I ENVIRONMENTAL POLICY ACT OF 1969 2 KDB 447498 D01 General RF RF EXPOSURE PROCEDURES AND EQUIPMENT Exposure Guidance v06 AUTHORIZATION POLICIES FOR MOBILE AND PORTABLE DEVICES 3.2 MPE COMPLIANCE REQUIREMENT 3.2.1 Limits 3.2.1.1 FCC 47 CFR Part 1 Subpart I According to §1.1307(b)(1), system operating under the provisions of this section shall be operating in a manner that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. Limits for Occupational / Controlled Exposure Electric Field Magnetic Field Averaging Times Frequency range Power Density (S) Strength (E) Strength (H) | E |2, | H |2 or S (MHz) (mW/cm2) (V/m) (A/m) (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f)* 6 30-300 61.4 0.163 1.0 6 300-1500 / / F/300 6 1500-100000 / / 5 6 Limits for General Population / Uncontrolled Exposure Electric Field Magnetic Field Averaging Times Frequency range Power Density (S) Strength (E) Strength (H) | E |2, | H |2 or S (MHz) (mW/cm2) (V/m) (A/m) (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 / / F/1500 30 1500-100000 / / 1 30 Note: f = frequency in MHz: * = Plane-wave equivalents power density. Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 7 of 9 Report No.: 190705027RFC-2 3.3 MPE CALCULATION METHOD FCC 47 CFR Part 1 Subpart I S = PG/4πR^2= EIRP/4πR^2 S = power density (in appropriate units, e.g., mw/cm2) P = power input to the antenna (in appropriate units, e.g., mw) G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor is normally numeric gain. R = distance to the center of radiation of the antenna (in appropriate units, e.g., cm) 3.4 MPE CALCULATION RESULTS Note: For the test results, the EUT had been tested with all conditions. But only the worst case was shown in test report. 3.4.1 For WLAN For Wi-Fi function, operating at 2412MHz to 2462 MHz for IEEE802.11b. 3.4.1.1 Antenna Type: Chain 0: Integral Antenna 3.4.1.2 Antenna Gain: Chain 0: 2412MHz to 2462 MHz: 0.5 dBi 3.4.1.3 Results for FCC 47 CFR Part 1 Subpart I Declared maximum Max. positive Calculated Declared conducted tolerance Antenna MPE MPE Freq. maximum maximum Operating Mode average according Gain Limit Value EIRP EIRP output manufacturer power (MHz) (dBm) (dBi) (dBm) (mW) (mW/cm2) IEEE 802.11b 2412-2462 19 1 0.5 20.5 112.2018 1 0.0223 3.4.2 For Satellite For Satellite function, operating at 1610 MHz to 1626.5 MHz. 3.4.2.1 Antenna Type: Chain 0: Integral Antenna 3.4.2.2 Antenna Gain: Chain 0: 1610 MHz to 1626.5 MHz: 1.6 dBi 3.4.2.3 Results for FCC 47 CFR Part 1 Subpart I Declared Max. positive maximum Calculated Declared tolerance Antenna Duty MPE MPE Operating Freq. conducted maximum maximum according Gain cycle Limit Value Mode average output EIRP EIRP manufacturer power (MHz) (dBm) (dBm) (dBm) (dBm) (%) (mW) (mW/cm2) 1610- Satellite 36 1 1.6 38.6 9.2 666.4811 1 0.1327 1626.5 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 8 of 9 Report No.: 190705027RFC-2 3.5 SIMULTANEOUS MULTI-BAND TRANSMISSION MPE ANALYSIS List of Mode for Simultaneous Multi-band Transmission No. Configurations Support/Not Support 1 WIFI + Satellite Support 3.5.1 Results for transmit simultaneously FCC 47 CFR Part 1 Subpart I Maximum MPE Value No. Configurations Transmit Limits WIFI Satellite simultaneously 1 WIFI + Satellite 0.0223 0.1327 0.155 1 Note: According to KDB 447498 D01 General RF Exposure Guidance v06, At the transmit simultaneously calculation method is as follows: Transmit simultaneously MPE = Σ of MPE ratios MPE ratios = Field strengths or power density / MPE limit at the test frequency Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 9 of 9 Report No.: 190705027RFC-2 APPENDIX 1 PHOTOS OF TEST SETUP N/A APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS Refer to Appendix 2 for EUT external and internal Photos. *** End of Report *** The test report is effective only with both signature and specialized stamp. The result(s) shown in this report refer only to the sample(s) tested. Without written approval of UnionTrust, this report can’t be reproduced except in full. Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com


Document Created: 2019-09-24 13:53:09
Document Modified: 2019-09-24 13:53:09
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC