SAR Report Part 2

FCC ID: Q3QLE1600T004BG

RF Exposure Info

Download: PDF
FCCID_582839

12\ rF Exposure Las, u1c

NCL CALIBRATION LABORATORIES Calibration File No.: CP-606 Client.: RFEL C E R T I F I C A T E OF C A L I B R A T I O N It is certified that the equipment identified below has been calibrated in the NCL CALIBRATION LABORATORIES by qualified personnel following recognized procedures and using transfer standards traceable to NRC/NIST. Equipment: Miniature Isotropic RF Probe 2450 MHz Manufacturer: APREL Laboratories Model No.: E-020 Serial No.: 215 Calibration Procedure: SSI/DRB-TP-D01-032-E020-V2 Project No: RFEL-Probe-215-Calibration-5166 BODY Calibration th Calibrated: 10 June 2005 Released on: 10th June 2005 This Calibration Certificate is Incomplete Unless Accompanied with the Calibration Results Summary Signature On File Released By: ______________________________________________________ NCL CALIBRATION LABORATORIES 51 SPECTRUM WAY Division of APREL Lab. NEPEAN, ONTARIO TEL: (613) 820-4988 CANADA K2R 1E6 FAX: (613) 820-4161

NCL Calibration Laboratories Division of APREL Laboratories. Introduction This Calibration Report reproduces the results of the calibration performed in line with the SSI/DRB-TP-D01-032-E020-V2 E-Field Probe Calibration Procedure. The results contained within this report are for APREL E-Field Probe E-020 215. References SSI/DRB-TP-D01-032-E020-V2 E-Field Probe Calibration Procedure IEEE 1528 “Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques” SSI-TP-011 Tissue Calibration Procedure Conditions Probe 215 was a new probe taken from stock prior to calibration. Ambient Temperature of the Laboratory: 22 °C +/- 0.5°C Temperature of the Tissue: 21 °C +/- 0.5°C We the undersigned attest that to the best of our knowledge the calibration of this probe has been accurately conducted and that all information contained within this report has been reviewed for accuracy. ------------------------------------------------------------ Stuart Nicol Director Product Development ------------------------------------------------------------ Janusz Lokaj Member of Engineering Staff (Calibration Engineer) Page 2 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

NCL Calibration Laboratories Division of APREL Laboratories. Calibration Results Summary Probe Type: E-Field Probe E-020 Serial Number: 215 Frequency: 2450 MHz Sensor Offset: 1.56 mm Sensor Length: 2.5 mm Tip Enclosure: Ertalyte* Tip Diameter: <5 mm Tip Length: 60 mm Total Length: 290 mm *Resistive to recommended tissue recipes per IEEE-1528 Sensitivity in Air Channel X: 1.2 µV/(V/m)2 Channel Y: 1.2 µV/(V/m)2 Channel Z: 1.2 µV/(V/m)2 Diode Compression Point: 95 mV Page 3 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

NCL Calibration Laboratories Division of APREL Laboratories. Sensitivity in Body Tissue Frequency: 2450 MHz Epsilon: 39.2 (+/-5%) Sigma: 1.80 S/m (+/-10%) ConvF Channel X: 4.6 Channel Y: 4.6 Channel Z: 4.6 Tissue sensitivity values were calculated using the load impedance of the APREL Laboratories Daq-Paq. Boundary Effect: Uncertainty resulting from the boundary effect is less than 2% for the distance between the tip of the probe and the tissue boundary, when less than 2.44mm. Spatial Resolution: The measured probe tip diameter is 5 mm (+/- 0.01 mm) and therefore meets the requirements of SSI/DRB-TP-D01-032 for spatial resolution. Page 4 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

NCL Calibration Laboratories Division of APREL Laboratories. Receiving Pattern 2450 MHz (Air) Receiving Pattern Probe s/n 215 2450MHz 0 350 1.2 10 340 20 330 30 1 320 40 310 0.8 50 300 0.6 60 290 0.4 70 280 0.2 80 270 0 90 260 100 250 110 240 120 230 130 220 140 210 150 200 160 190 170 180 Ch1 Ch2 Ch3 Tot Page 5 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

NCL Calibration Laboratories Division of APREL Laboratories. Isotropy Error 2450 MHz (Air) Isotropy Error Probe s/n 215 2450MHz 10 9 8 7 6 5 4 3 Error [dB] 2 1 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 0 100 200 300 Isotropy Plot Probe s/n 215 2450MHz 0.8 0.7 0.6 Voltage (mV) 0.5 0.4 0.3 0.2 0.1 0 0 100 200 300 Degrees (x10) Ch1 Ch2 Ch3 Isotropicity in Tissue: 0.10 dB Page 6 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

NCL Calibration Laboratories Division of APREL Laboratories. Dynamic Range Probe 215 Dynamic Range 10000 1000 100 Voltage [microV] Uncompensated 10 Compensated 1 0.1 0.01 1.00 10.00 100.00 1,000.00 10,000.00 100,000.00 1,000,000.00 10,000,000.00 Electric Field [(V/m)^2] Page 7 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

NCL Calibration Laboratories Division of APREL Laboratories. Video Bandwidth Probe Frequency Characteristics 1 0 -1 -2 -3 -4 -5 -6 1 10 100 1000 10000 Frequency (Hz) Video Bandwidth at 500 Hz 1 dB Video Bandwidth at 1.02 KHz: 3 dB Page 8 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

NCL Calibration Laboratories Division of APREL Laboratories. Conversion Factor Uncertainty Assessment Frequency: 2450MHz Epsilon: 39.2 (+/-5%) Sigma: 1.80 S/m (+/-10%) ConvF Channel X: 4.6 7%(K=2) Channel Y: 4.6 7%(K=2) Channel Z: 4.6 7%(K=2) To minimize the uncertainty calculation all tissue sensitivity values were calculated using a load impedance of 5 MΩ. Boundary Effect: For a distance of 2.4mm the evaluated uncertainty (increase in the probe sensitivity) is less than 2%. Page 9 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

NCL Calibration Laboratories Division of APREL Laboratories. Test Equipment The test equipment used during Probe Calibration, manufacturer, model number and, current calibration status are listed and located on the main APREL server R:\NCL\Calibration Equipment\Instrument List May 2005. Page 10 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

12\ rF Exposure Las, u1c

NCL CALIBRATION LABORATORIES Calibration File No: CD-342 Project Number: RFEB-ALSAS-10U-4087 CERTIFICATE OF CALIBRATION It is certified that the equipment identified below has been calibrated in the NCL CALIBRATION LABORATORIES by qualified personnel following recognized procedures and using transfer standards traceable to NRC/NIST. RFE Validation Dipole Manufacturer: APREL Laboratories Part number: ALS-D-2450-S-2 Frequency: 2.45 GHz Serial No: RFE-278 Customer: RFE Calibrated: 20 February 2004 Released on: 20 February 2004 ~L CALIBRATION LABORATORIES 51 SPECTRUM WAY Division of APREL Lab. NEPEAN, ONTARIO TEL: (613) 820-4988 CANADA K2R 1E6 FAX: (613) 820-4161

NCL Calibration Laboratories Division of APREL Laboratories. Calibration Results Summary The following results relate the Calibrated Dipole and should be used as a quick reference for the user. Mechanical Dimensions Length: 51.5 mm Height: 30.5 mm Electrical Specification SWR: 1.09 U Return Loss: -26.8 dB Impedance: 49.00 System Validation Results Frequenc 1 Gram 10 Gram Peak 2.45 GHz 48.07 25.65 95.6 C ,.. Page 1 of9 Calibrated by by:/e Approved f:::

NCL Calibration Laboratories Division of APREL Laboratories. Introduction This Calibration Report has been produced in line with the SSI Dipole Calibration Procedure SSI-TP-018-ALSAS. The results contained within this report are for Validation Dipole RFE-278. The calibration routine consisted of a three-step process. Step 1 was a mechanical verification of the dipole to ensure that it meets the IEEE/APREL mechanical specifications. Step 2 was an Electrical Calibration for the Validation Dipole, where the SWR, Impedance, and the Return loss were assessed. Step 3 involved a System Validation using the ALSAS-10U, along with Panasonic E-020 130 MHz to 26 GHz E-Field Probe Serial Number 213. References SSI-TP-018-ALSAS Dipole Calibration Procedure SSI-TP-016 Tissue Calibration Procedure IEEE 1528 "Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques" . Conditions Dipole RFE-278 was new taken from stock. Ambient Temperature of the Laboratory: 22°C +/- 0.5°C Temperature of the Tissue: 20°C +/- 0.5°C lY2 Page 3 of9 Calibrated by r-

NCL Calibration Laboratories Division of APREL Laboratories. Dipole Calibration Results Mechanical Verification IEEE Length IEEE Height Measured Measured Length Heiaht 51.5 mm 30.4 mm 51.5 mm 30.5 mm Tissue Validation Body Tissue 2450 MHz Measured 52.5 1.78 ~~>~ Page 4 of9 Calibrated by (/r .

NCL Calibration Laboratories Divisionof APRELLaboratories. Electrical Calibration Test Result S11 R/L -26.8 dB SWR 1.098 U Impedance 49.0Q The Following Graphs are the results as displayed on the Vector Network Analyzer. 811 Parameter Return Loss S11 FORWARDREFLECTION CH 1 - S11 REFERENCEPLANE LOG MAGNITUDE ~REF=6.729 dB 6.000 dB/DIV 6.9844 mm ~ ~MARKER1 2.450593 GHz -26.830 dB MARKERTO MAX '...~r""'J"'r""'r""!';J= MARKERTO MIN :: . ~ ! : "' : :: : : /- ./.:. : : . . . ~...' ~. . "..'.'..1.1"'''I\J.''11'1.'''' MARKERREADOUT 2.002861 GHz 2.898325 FUNCTIONS -------- -------- C~ '> ~?> Page 5 of9 Calibrated by ~ r- .

NCL Calibration Laboratories Division of APREL Laboratories. SWR Sll FORWARD REFLECTION CH 1 - Sll REFERENCEPLANE SWR ~REF=0.000 1.000 U/DIV 6.98'1'1 mm \ pU ~HARKER1 2.'150593 6Hz ..\~ \ ;. L... . [ ' ~ :. . ; .. 1.098 U HARKERTO HAX w U 'u 'w U U U. U U U! U u.I'J'II"'J""'U' HARKERTO HIN ~ .~ ';"""""~""""" .~ : ~ .:...0....... \. ::::::: U W j :; u N ; u u u, : u u u ,w : u u u. : u u u. : U W W U : U U u, : U U U w: / : : u u u u . u .uu. UU(U ..uww'uuuuu' 'WUUUW}/: u. 'U'U' , : ~ ; ,,:..: ~ ~ ~.~-:.:... .l ~........... , .: :. : .:: .: ,:,. ':. :........... .. ... .. .. . . ~ HARKERREADOUT 2.002861 6Hz 2.898325 FUNCTIONS 1.tHJt1IHb l.JNZ <:::.t1t1t1t1t1t1 tUNlIIUN:S c- .! Page 6of9 Calibrated by Approved by:/ c;/ ? I

NCL Calibration Laboratories Division of APREL Laboratories. Smith Chart Dipole Impedance SII FORWARD REFLECTION CH 1 - SII IMPEDANCE REFERENCEPLANE 6.98'1'1 mm ItMARKER1 2.'150593 GHz '19.037 Q 2.877 jQ MARKERTO MAX MARKERTO MIN MARKERREADOUT -1 FUNCTIONS 2.002861 - 2.898325 GHz Page 7 of9 s.f .

NCL Calibration Laboratories Divisionof APRELLaboratories. System Validation Results Using the Electrically Calibrated Dipole Frequency 1 Gram 10 Gram Peak AboveFeed Point 2.45 GHz 48.07 25.65 95.6 Page 80f9 Calibrated by I

NCL Calibration Laboratories Division of APREL Laboratories. Test Equipment The test equipment used during Probe Calibration, manufacturer, model number and, current calibration status are listed and located on the main APREL server R:\NCL\Calibration Equipment\lnstrument List May 2003 /~ Page 9 of9 Calibrated by ~ Gee: --7U'~

12\ rF Exposure Las, u1c

NCL CALIBRATION LABORATORIES Caltbration Fie No.: RFE—273 CERTIFICATE OF CALIBRATION 1tcortfed that he equipmentidenifed below has been calirated in the NCL CALIBRATION LABORATORIES by qualffed prsonnefalowing recognized procedures and using transtorstandards raceable to Natnal Standards. Thicknoss of the UniPhantom is 2 mm + 10% Pinna thicknoss is 6 mm : 10% Resoluton: 0.01 mm Caltrated to: 0.0 mm Stabiiy: o% Accuracy: <0.1 mm Catbrated By: Kok £. Feb 04. CALIBRATION LAB oR ersrecrunmey onionetsenes tss rerew.anmo Ts mmzaime chdon kamies mc mmamaer


Document Created: 2005-09-07 18:16:01
Document Modified: 2005-09-07 18:16:01
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC