SAR Dipole 2

FCC ID: Q3N-CP30

RF Exposure Info

Download: PDF
FCCID_1491455

Calibration Laboratol'y of {\\\\\‘t\"/}”/',@ Schweizerischer Kalibrierdienst Schmid & Partner i‘a\E'/{M% Service suisse d‘étalonnage Engineering AG 24 Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland I/ NN Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client CCS—TW (Auden) Certificate No: D1900V2—5d056_Nov10 |CALIBRATION CERTIFICATE I Object D1900V2 — SN: 54056 Calibration procedure(s) QA CAL—O5.v7 Calibration procedure for dipole validation kits Calibration date: November 25, 2010 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter EPM—442A GB37480704 06—Oct—10 (No. 217—01266) Oct—11 Power sensor HP 8481A US37292783 06—Oct—10 (No. 217—01268) Oct—11 Reference 20 dB Attenuator SN: 5086 (20g) 30—Mar—10 (No. 217—01158) Mar—11 Type—N mismatch combination SN: 5047.2 / 06327 80—Mar—10 (No. 217—01162) Mar—11 Reference Probe ESSDV3 SN: 3205 80—Apr—10 (No. ES3—3205_Apr10) Apr—11 DAE4 SN: 601 10—Jun—10 (No. DAE4—601_Jun10) Jun—11 Secondary Standards ID # Check Date (in house) Scheduled Check Power sensor HP 8481A MY41092317 18—Oct—02 (in house check Oct—08) In house check: Oct—11 RF generator R&S SMT—06 100005 4—Aug—99 (in house check Oct—09) In house check: Oct—11 Network Analyzer HP 8753E US37390585 $4206 18—Oct—01 (in house check Oct—10) In house check: Oct—11 Name Function Signature Calibrated by: Dimcelliev Laboratory Techniclan 00 %U/’ Approved by: KatJa Pokovic Technical Manager ooose Issued: November 25, 2010 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: D1900V2—5d056_Nov10 Page 1 of 9

Calibration Laboratory of s\“\‘&'/"/m""z Schweizerischer Kalibrierdienst Schmid & Partner i%_//mfi:& Service suisse d‘étalonnage Engineering AG Ts Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland 'f/,fi\\? Swiss Calibration Service "thilubs Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Muitilateral Agreementfor the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2003, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", December 2003 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 c) Federal Communications Commission Office of Engineering & Technology (FCC OET), "Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields; Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions", Supplement C (Edition 01—01) to Bulletin 65 Additional Documentation: d) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. SAR measured: SAR measured at the stated antenna input power. SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. Certificate No: D1900V2—5d056_Nov10 Page 2 of 9

Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASYS V52.2 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom V5.0 Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 1900 MHz £ 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 40.0 140 mho/m Measured Head TSL parameters (22.0 £0.2) °C 39.3 + 6 % 1.40 mho/m + 6 % Head TSL temperature during test (21.5 £ 0.2) °C SAR result with Head TSL SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 250 mW input power 10.0 mWw /g SAR normalized normalized to 1W 40.0 mW / g SAR for nominal Head TSL parameters normalized to 1W 39.9 mW /g + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 5.21 mW /g SAR normalized normalized to 1W 20.8 mW / g SAR for nominal Head TSL parameters normalized to 1W 20.8 mW /g + 16.5 % (k=2) Certificate No: D1900V2—5d056_Nov10 Page 3 of 9

Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 53.3 1.52 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 52.8 x 6 % 1.52 mho/m £ 6 % Body TSL temperature during test (22.0 + 0.2) °C SAR result with Body TSL SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 250 mW input power 9.97 mW /g SAR normalized normalized to 1W 39.9 mW /g SAR for nominal Body TSL parameters normalized to 1W 39.8 mW / g 17.0 % (k=2) SAR averaged over 10 cm‘ (10 g) of Body TSL condition SAR measured 250 mW input power 5.24 mW /g SAR normalized normalized to 1W 21.0 mW /g SAR for nominal Body TSL parameters normalized to 1W 20.9 mW / g + 16.5 % (K=2) Certificate No: D1900V2—50056_Nov10 Page 4 of 9

Appendix Antenna Parameters with Head TSL Impedance, transformed to feed point 53.5 Q + 6.0 jQ Return Loss —23.5 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 48.3 Q + 7.0 jQ Return Loss —22.7 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.205 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on March 19, 2004 Certificate No: D1900V2—50056_Nov10 Page 5 of 9

DASY5 Validation Report for Head TSL Date/Time: 25.11.2010 13:07:06 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 — SN:50056 Communication System: CW; Frequency: 1900 MHz; Duty Cycle: 1: 1 Medium: HSL U12 BB Medium parameters used: £ = 1900 MHz; 0 = 1.4 mho/m; & = 39.4; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASYS (IEEE/IEC/ANSI €63.19—2007) DASY5 Configuration: Probe: ES3DV3 — SN3205; ConvF(5.09, 5.09, 5.09); Calibrated: 30.04.2010 * Sensor—Surface: 3mm (Mechanical Surface Detection) e Electronics: DAE4 Sn601; Calibrated: 10.06.2010 * Phantom: Flat Phantom 5.0 (front); Type: QDOOOPS50OAA; Serial: 1001 & Measurement SW: DASY52, V52.2 Build 0, Version 52.2.0 (163) * Postprocessing SW: SEMCAD X, V14.2 Build 2, Version 14.2.2 (1685) Pin=250 mW /d=10mm, dist=3.0mm (ES—Probe)/Zoom Scan (7x7x7) /Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 98.4 V/m; Power Drift = 0.039 dB Peak SAR (extrapolated) = 18.5 W/kg SAR(1 g) = 10 mW/g; SAR(10 g) = 5.21 mW/g Maximum value of SAR (measured) = 12.6 mW/g 0 dB = 12.6mW/g Certificate No: D1900V2—54056_Nov10 Page 6 of 9

Impedance Measurement Plot for Head TSL 25 Nov 2010 10:43144 CHI sii 1 U Fs 3: 59.504 o 6.0059 6 503.09 pH 1 920.000 000 MHz De 1 ‘ i Ca { > \ ob CH2 $11 LOG .5 dB/REF. —20 dB. . $t—23.465 d 900.000 000 MHz i || | Ca U~ START1 700.000000 MHz ~ { STOP 2 100.000 008 MHz Certificate No: D1900V2—5d056_Nov10 Page 7 of 9

DASY5 Validation Report for Body Date/Time: 24.11.2010 12:22:13 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 1900 MHz; Type: D1900V2; Serial; DL900V2 — SN:504056 Communication System: CW; Frequency: 1900 MHz; Duty Cycle: 1: 1 Medium: MSL U12 BB Medium parameters used: f = 1900 MHz; 0 = 1.52 mho/m; &, = 52.8; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C€63.19—2007) DASYS5 Configuration: & Probe: ES3DV3 — SN3205; ConvF(4.59, 4.59, 4.59); Calibrated: 30.04.2010 * Sensor—Surface: 3mm (Mechanical Surface Detection) * Electronics: DAE4 Sn601; Calibrated: 10.06.2010 & Phantom: Flat Phantom 5.0 (back); Type: QDOOOP50AA; Serial: 1002 * Measurement SW: DASY52, V52.2 Build 0, Version 52.2.0 (163) e Postprocessing SW: SEMCAD X, V14.2 Build 2, Version 14.2.2 (1685) Pin=250 mW /d=10mm, dist=3.0mm (ES—Probe)/Zoom Scan (7x7x7) /Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 95.3 V/m; Power Drift = —0.00709 dB Peak SAR (extrapolated) = 17.1 W/kg SAR(I g) = 9.97 mW/g; SAR(10 g) = 5.24 mW/g Maximum value of SAR (measured) = 12.3 mW/g 473 0 dB = 12.3mW/g Certificate No: D1900V2—5d056_Nov10 Page 8 of 9

Impedance Measurement Plot for Body TSL 24 Nov 2010 10:37:124 CHI) sii 1 U FS 3t 48.390 a 6.9707 o 593.91 pH 1 980.000 dbd MHz . po x 1 . De l N\,v’ . — \ Cor i i > | M || \ I I 13# e o i Wls Ave n ‘ } [ 16" . +. 4 \ 1 L. CH2 $11 LOG 5. dB/REF —20. dB 3:i—22.770 d8 1 980.000 000 MHz E_ Cor fiv 169 mc e uhss mds cisc efi ds 1 w n on nc encnno unc csalp uces nds e on docesc e > START 1550.000 abehz NOC OTOCOT [ stor 2 {00.000oog MHz Certificate No: D1900V2—5d056_Novi0 Page 9 of 9


Document Created: 2019-09-02 01:05:43
Document Modified: 2019-09-02 01:05:43
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC