Report

FCC ID: Q3N-85002

Test Report

Download: PDF
FCCID_823791

Compliance Certification Services Inc. Report No: 70706101-RP1 FCC ID: Q3N-85002 Date of Issue: July 16, 2007 FCC 47 CFR PART 15 SUBPART C TEST REPORT For Terminal Model: 8500 Trade Name: CipherLAB Issued to Cipherlab Co., Ltd. 12F, 333 Dunhua S. Rd., Sec. 2, Taipei 106, Taiwan R.O.C. Issued by Compliance Certification Services Inc. No. 81-1, Lane 210, Pa-De 2nd Rd., Luchu Hsiang, Taoyuan Shien, (338) Taiwan, R.O.C. http://www.ccsemc.com.tw service@tw.ccsemc.com Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Page 1 Total Page: 24 Rev. 00

Compliance Certification Services Inc. Report No: 70706101-RP1 FCC ID: Q3N-85002 Date of Issue: July 16, 2007 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION............................................................................................. 3 2. EUT DESCRIPTION .................................................................................................................... 3 3. TEST METHODOLOGY ............................................................................................................. 5 3.1 EUT CONFIGURATION .............................................................................................................. 5 3.2 EUT EXERCISE ......................................................................................................................... 5 3.3 GENERAL TEST PROCEDURES .................................................................................................. 5 3.4 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS ............................................. 6 3.5 DESCRIPTION OF TEST MODES ................................................................................................. 6 4. INSTRUMENT CALIBRATION................................................................................................. 7 4.1 MEASURING INSTRUMENT CALIBRATION ........................................................................... 7 4.2 MEASUREMENT EQUIPMENT USED .............................................................................. 7 5. FACILITIES AND ACCREDITATIONS ................................................................................... 8 5.1 FACILITIES .............................................................................................................................. 8 5.2 EQUIPMENT ............................................................................................................................. 8 5.3 TABLE OF ACCREDITATIONS AND LISTINGS ............................................................................ 9 6. SETUP OF EQUIPMENT UNDER TEST ................................................................................ 10 6.1 SETUP CONFIGURATION OF EUT ............................................................................................ 10 6.2 SUPPORT EQUIPMENT .................................................................................................... 10 7. FCC PART 15.225 REQUIREMENTS...................................................................................... 11 7.1 20 DB BANDWIDTH .......................................................................................................... 11 7.2 RADIATED EMISSIONS ........................................................................................................... 13 7.2.1 FREQUENCY STABILITY ........................................................................................................ 17 7.3 POWERLINE CONDUCTED EMISSIONS .................................................................................... 19 APPENDIX I PHOTOGRAPHS OF TEST SETUP ....................................................................... 22 Page 2 Rev. 00

Compliance Certification Services Inc. Report No: 70706101-RP1 FCC ID: Q3N-85002 Date of Issue: July 16, 2007 1. TEST RESULT CERTIFICATION Applicant: Cipherlab Co., Ltd. 12F, 333 Dunhua S. Rd., Sec. 2, Taipei 106, Taiwan R.O.C. Equipment Under Test: Terminal Trade Name: CipherLAB Model: 8500 Date of Test: July 9 ~ 11, 2007 APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 15 Subpart C No non-compliance noted We hereby certify that: The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2003 and the energy emitted by the sample tested as described in this report is in compliance with the requirements of FCC Rules Part 15.225. The test results of this report relate only to the tested sample identified in this report. Approved by: Reviewed by: S.C. Wang Miller Lee Executive Vice President Deputy Manager of Linkou Laboratory Compliance Certification Services Inc. Compliance Certification Services Inc. Page 3 Rev. 00

Compliance Certification Services Inc. Report No: 70706101-RP1 FCC ID: Q3N-85002 Date of Issue: July 16, 2007 2. EUT DESCRIPTION Product Terminal Trade Name CipherLAB Model Number 8500 Model Difference N/A LEADER ELECTRONICS INC. / NU40-2060330-I3 Power Supply I/P: 100-240V, 1.2A, 50-60Hz O/P: 6.0V, 3.3A Frequency Range 13.56MHz Modulation Technique ASK Antenna Specification Winding wire Antenna / Gain: -31.2 dBi Remark: 1. The sample selected for test was engineering sample that approximated to production product and was provided by manufacturer. 2. This submittal(s) (test report) is intended for FCC ID: Q3N-85002 filing to comply with Section 15.227 of the FCC Part 15, Subpart C Rules. Page 4 Rev. 00

Compliance Certification Services Inc. Report No: 70706101-RP1 FCC ID: Q3N-85002 Date of Issue: July 16, 2007 3. TEST METHODOLOGY The tests documented in this report were performed in accordance with ANSI C63.4 and FCC CFR 47 2.1046, 2.1047, 2.1049, 2.1051, 2.1053, 2.1055, 2.1057, 15.207, 15.209 and 15.225. 3.1 EUT CONFIGURATION The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and operating in a manner that intends to maximize its emission characteristics in a continuous normal application. 3.2 EUT EXERCISE The EUT was operated in the engineering mode to fix the TX frequency that was for the purpose of the measurements. 3.3 GENERAL TEST PROCEDURES Conducted Emissions The EUT is placed on the turntable, which is 0.8 m above ground plane. According to the requirements in Section 13.1.4.1 of ANSI C63.4. Conducted emissions from the EUT measured in the frequency range between 0.15 MHz and 30MHz using CISPR Quasi-peak and average detector modes. Radiated Emissions The EUT is placed on a turn table, which is 0.8 m above ground plane. The turntable shall rotate 360 degrees to determine the position of maximum emission level. EUT is set 3m away from the receiving antenna, which varied from 1m to 4m to find out the highest emission. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. In order to find out the maximum emissions, exploratory radiated emission measurements were made according to the requirements in Section 13.1.4.1 of ANSI C63.4. Page 5 Rev. 00

Compliance Certification Services Inc. Report No: 70706101-RP1 FCC ID: Q3N-85002 Date of Issue: July 16, 2007 3.4 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS (a) Except as shown in paragraph (d) of this section, only spurious emissions are permitted in any of the frequency bands listed below: MHz MHz MHz GHz 0.090 - 0.110 16.42 - 16.423 399.9 - 410 4.5 - 5.15 1 0.495 - 0.505 16.69475 - 16.69525 608 - 614 5.35 - 5.46 2.1735 - 2.1905 16.80425 - 16.80475 960 - 1240 7.25 - 7.75 4.125 - 4.128 25.5 - 25.67 1300 - 1427 8.025 - 8.5 4.17725 - 4.17775 37.5 - 38.25 1435 - 1626.5 9.0 - 9.2 4.20725 - 4.20775 73 - 74.6 1645.5 - 1646.5 9.3 - 9.5 6.215 - 6.218 74.8 - 75.2 1660 - 1710 10.6 - 12.7 6.26775 - 6.26825 108 - 121.94 1718.8 - 1722.2 13.25 - 13.4 6.31175 - 6.31225 123 - 138 2200 - 2300 14.47 - 14.5 8.291 - 8.294 149.9 - 150.05 2310 - 2390 15.35 - 16.2 8.362 - 8.366 156.52475 - 2483.5 - 2500 17.7 - 21.4 8.37625 - 8.38675 156.52525 2655 - 2900 22.01 - 23.12 8.41425 - 8.41475 156.7 - 156.9 3260 - 3267 23.6 - 24.0 12.29 - 12.293 162.0125 - 167.17 3332 - 3339 31.2 - 31.8 12.51975 - 12.52025 167.72 - 173.2 3345.8 - 3358 36.43 - 36.5 12.57675 - 12.57725 240 - 285 3600 - 4400 (2) 13.36 - 13.41 322 - 335.4 1 Until February 1, 1999, this restricted band shall be 0.490-0.510 MHz. 2 Above 38.6 (b) Except as provided in paragraphs (d) and (e), the field strength of emissions appearing within these frequency bands shall not exceed the limits shown in Section 15.209. At frequencies equal to or less than 1000 MHz, compliance with the limits in Section 15.209 shall be demonstrated using measurement instrumentation employing a CISPR quasi-peak detector. Above 1000 MHz, compliance with the emission limits in Section 15.209 shall be demonstrated based on the average value of the measured emissions. The provisions in Section 15.35 apply to these measurements. 3.5 DESCRIPTION OF TEST MODES The EUT (model: 8500) had been tested under engineering test mode condition and the EUT staying in continuous transmitting mode. The field strength of spurious emission was measured in the following position: EUT stand-up position (Z mode), lie-down position (X, Y mode) and docking mode. The worst emission was found in docking mode for powerline conducted emissions, Z mode with docking mode for radiation emissions and the worst case was recorded. Page 6 Rev. 00

Compliance Certification Services Inc. Report No: 70706101-RP1 FCC ID: Q3N-85002 Date of Issue: July 16, 2007 4. INSTRUMENT CALIBRATION 4.1 MEASURING INSTRUMENT CALIBRATION The measuring equipment, which was utilized in performing the tests documented herein, has been calibrated in accordance with the manufacturer's recommendations for utilizing calibration equipment, which is traceable to recognized national standards. 4.2 MEASUREMENT EQUIPMENT USED Equipment Used for Emissions Measurement Remark: Each piece of equipment is scheduled for calibration once a year. 3M Semi Anechoic Chamber Name of Equipment Manufacturer Model Serial Number Calibration Due Spectrum Analyzer Agilnet E4411B MY41440314 N.C.R Spectrum Analyzer R&S FSP30 100112 09/12/2007 EMI Test Receiver R&S ESVS20 838804/004 01/18/2008 Pre-Amplifier Anritsu MH648A M18767 08/31/2007 AFS42-00102650 Pre-Amplifier MITEQ 924206 04/27/2008 -42-10P-42 Bilog Antenna SCHWAZBECK VULB9163 144 03/31/2008 Horn Antenna EMCO 3115 00022250 04/16/2008 Loop Antenna EMCO 6502 2356 08/31/2007 Turn Table Chance Most CM-T003-1 T807-6 N.C.R Antenna Tower Chance Most CM-A003-1 A807-6 N.C.R Controller CCS CC-C-1F N/A N.C.R RF Switch ANRITSU MP59B M53867 N.C.R Site NSA CCS N/A N/A 05/05/2008 Test S/W LABVIEW (V 6.1) Remark: The measurement uncertainty is less than +/-2.0065dB (30MHz ~ 1GHz), +/-3.0958dB (Above 1GHz) which is evaluated as per the NAMAS NIS 81 and CISPR/A/291/CDV. Powerline Conducted Emissions Test Site Name of Equipment Manufacturer Model Serial Number Calibration Due EMI Test Receiver R&S ESCS30 845552/030 03/21/2008 LISN R&S ESH2-Z5 843285/010 01/04/2008 LISN R&S ESH3-Z5 848773/014 10/24/2007 Test S/W LABVIEW (V 6.1) Remark: The measurement uncertainty is less than +/- 2.81dB, which is evaluated as per the NAMAS NIS 81 and CISPR/A/291/CDV. Page 7 Rev. 00

Compliance Certification Services Inc. Report No: 70706101-RP1 FCC ID: Q3N-85002 Date of Issue: July 16, 2007 5. FACILITIES AND ACCREDITATIONS 5.1 FACILITIES All measurement facilities used to collect the measurement data are located at No.199, Chunghsen Road, Hsintien City, Taipei Hsien, Taiwan, R.O.C. Tel: 886-2-2217-0894 / Fax: 886-2-2217-1029 No.11, Wugong 6th Rd., Wugu Industrial Park, Taipei Hsien 248, Taiwan Tel: 886-2-2299-9720 / Fax: 886-2-2298-4045 No.81-1, Lane 210, Bade 2nd Rd., Luchu Hsiang, Taoyuan Hsien 338, Taiwan Tel: 886-3-324-0332 / Fax: 886-3-324-5235 The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI C63.4 and CISPR Publication 22. 5.2 EQUIPMENT Radiated emissions are measured with one or more of the following types of linearly polarized antennas: tuned dipole, biconical, log periodic, bi-log, and/or ridged waveguide, horn. Spectrum analyzers with pre-selectors and quasi-peak detectors are used to perform radiated measurements. Conducted emissions are measured with Line Impedance Stabilization Networks and EMI Test Receivers. Calibrated wideband preamplifiers, coaxial cables, and coaxial attenuators are also used for making measurements. All receiving equipment conforms to CISPR Publication 16-1, “Radio Interference Measuring Apparatus and Measurement Methods.” Page 8 Rev. 00

Compliance Certification Services Inc. Report No: 70706101-RP1 FCC ID: Q3N-85002 Date of Issue: July 16, 2007 5.3 TABLE OF ACCREDITATIONS AND LISTINGS Country Agency Scope of Accreditation Logo EN 55011, EN 55014-1/2, CISPR 11, CISPR 14-1/2, EN 55022, EN 55015, CISPR 22, CISPR 15, AS/NZS 3548, VCCI V3 (2001), CFR 47, FCC Part 15/18, CNS 13783-1, CNS 13439, CNS 13438, CNS 13803, USA A2LA CNS 14115, EN 55024, IEC 801-2, IEC 801-3, IEC 801-4, IEC/EN 61000-3-2, IEC/EN 61000-3-3, IEC/EN 61000-4-2/3/4/5/6/8/11, EN 50081-1/ EN 61000-6-3, EN 50081-2/EN 61000-6-4, 0824-01 EN 50081-2/EN 61000-6-1: 2001 3/10 meter Open Area Test Sites (93105, 90471) / USA FCC 3M Semi Anechoic Chamber (965860) to perform FCC Part 15/18 measurements 93105, 90471 965860 3/10 meter Open Area Test Sites to perform conducted/radiated Japan VCCI measurements R-2541/1066/725/879 C-402/747/912 EN 50081-1/2, EN 50082-1/2, IEC 61000-6-1/2, EN 50091-2, EN 50130-4, EN 55011, EN 55013, EN 55014-1/2, EN 55015, EN 55022, EN 55024, EN 61000-3-2/3, Norway NEMKO EN 61326-1, IEC 61000-4-2/3/4/5/6/8/11, EN 60601-1-2, EN 300 328, EN 300 422-2, EN 301 419-1, ELA 124a EN 301 489-01/03/07/08/09/17, EN 301 419-2/3, ELA 124b EN 300 454-2, EN 301 357-2 ELA 124c EN 300 328, EN 300 220-1, EN 300 220-2, EN 300 220-3, 47 CFR FCC Part 15 Subpart C, Taiwan TAF EN 61000-3-2, EN 61000-3-3, CNS 13439, CNS 13783-1, CNS 14115, CNS 13438, AS/NZS CISPR 22, CNS 13022-1, IEC 61000-4-2/3/4/5/6/8/11, CNS 13022-2/3 CNS 13438, CNS 13783-1, SL2-IS-E-0014 Taiwan BSMI CNS 13439, CNS 14115 SL2-IN-E-0014 SL2-A1-E-0014 SL2-R1-E-0014 SL2-R2-E-0014 SL2-L1-E-0014 3/10 meter Open Area Test Sites (IC 3991-3, IC 3991-4) / Industry IC 3991-3 Canada 3M Semi Anechoic Chamber (IC 6106) to perform Canada IC 3991-4 RSS 212 Issue 1 IC 6106 * No part of this report may be used to claim or imply product endorsement by A2LA or any agency of the US Government. Page 9 Rev. 00

Compliance Certification Services Inc. Report No: 70706101-RP1 FCC ID: Q3N-85002 Date of Issue: July 16, 2007 6. SETUP OF EQUIPMENT UNDER TEST 6.1 SETUP CONFIGURATION OF EUT See test photographs attached in Appendix 1 for the actual connections between EUT and support equipment. 6.2 SUPPORT EQUIPMENT No. Device Type Brand Model Series No. FCC ID Data Cable Power Cord 1. Cradle CipherLAB 8500 Cradle N/A N/A N/A N/A Remark: 1. All the equipment/cables were placed in the worst-case configuration to maximize the emission during the test. 2. Grounding was established in accordance with the manufacturer’s requirements and conditions for the intended use. Page 10 Rev. 00

Compliance Certification Services Inc. Report No: 70706101-RP1 FCC ID: Q3N-85002 Date of Issue: July 16, 2007 7. FCC PART 15.225 REQUIREMENTS 7.1 20 DB BANDWIDTH LIMIT None; for reporting purposes only. Test Configuration Spectrum EUT Analyzer TEST PROCEDURE 1. Place the EUT on the table and set it in the transmitting mode. 2. Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the spectrum analyzer. 3. Set the spectrum analyzer as RBW=1kHz, VBW = RBW, Span = 200kHz, Sweep = auto. 4. Mark the peak frequency and 20dB (upper and lower) frequency. 5. Repeat until all the rest channels are investigated. TEST RESULTS No non-compliance noted Page 11 Rev. 00

Compliance Certification Services Inc. Report No: 70706101-RP1 FCC ID: Q3N-85002 Date of Issue: July 16, 2007 Test Plot Page 12 Rev. 00

Compliance Certification Services Inc. Report No: 70706101-RP1 FCC ID: Q3N-85002 Date of Issue: July 16, 2007 7.2 RADIATED EMISSIONS LIMIT According to §15.225, (a) The field strength of any emissions within the band 13.553 – 13.567 MHz shall not exceed 15,848 microvolts / meter at 30 meters. (b) Within the bands 13.410 – 13.553 MHz and 13.567 -13.710 MHz, the field strength of any emissions shall not exceed 334 microvolts / meter at 30 meters. (c) Within the bands 13.110 – 13.410 MHz and 13.710 – 14.010 MHz the field strength of any emissions shall not exceed 106 microvolts / meter at 30 meters. (d) The field strength of any emissions appearing outside of the 13.110 – 14.010 MHz and shall not exceed the general radiated emission limits in §15.209. According to §15.225(a), except as provided elsewhere in this Subpart, the emissions from an intentional radiator shall not exceed the field strength levels specified in the following table: Frequency Field Strength Measurement Distance (MHz) (µV/m at meter) (meter) 0.009 – 0.490 2400 / F (kHz) 300 0.490 – 1.705 24000 / F (kHz) 30 1.705 – 30.0 30 30 30 - 88 100** 3 88-216 150** 3 216-960 200** 3 Above 960 500 3 ** Except as provided in paragraph (g), fundamental emissions from intentional radiators operating under this Section shall not be located in the frequency bands 54-72 MHz, 76-88 MHz, 174-216 MHz or 470-806 MHz. However, operation within these frequency bands is permitted under other sections of this Part, e.g., Sections 15.231 and 15.241. Page 13 Rev. 00

Compliance Certification Services Inc. Report No: 70706101-RP1 FCC ID: Q3N-85002 Date of Issue: July 16, 2007 Test Configuration 9kHz ~ 30MHz 3m Loop antenna EUT Spectrum / Receiver Turntable 1m 0.8m Reference ground plane 30MHz ~ 1 GHz Antenna tower 3m Bilog antenna EUT 4m Spectrum / Receiver Turntable 1m 0.8m Pre-amp Reference ground plane Page 14 Rev. 00

Compliance Certification Services Inc. Report No: 70706101-RP1 FCC ID: Q3N-85002 Date of Issue: July 16, 2007 TEST PROCEDURE 1. The EUT is placed on a turntable, which is 0.8m above ground plane. 2. The turntable shall be rotated for 360 degrees to determine the position of maximum emission level. 3. EUT is set 3m away from the receiving antenna, which is varied from 1m to 4m to find out the highest emissions. 4. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 5. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 6. Set the spectrum analyzer in the following setting as: RBW=100kHz / VBW=300kHz / Sweep=AUTO 7. Repeat above procedures until the measurements for all frequencies are complete. Page 15 Rev. 00

Compliance Certification Services Inc. Report No: 70706101-RP1 FCC ID: Q3N-85002 Date of Issue: July 16, 2007 TEST RESULTS Operation Mode: TX mode Test Date: July 12, 2007 Temperature: 26°C Tested by: Arno Hsieh Humidity: 55 % RH Polarity: Ver. / Hor. Frequency Ant.Pol. Detector Mode Reading Correction Factor Result Limit 3m Margin (MHz) (H/V) (PK/QP/AVG) (dBuV) (dB/m) (dBuV/m) (dBuV/m) (dB) 13.56 V Peak 49.00 12.29 61.29 124.00 -58.71 272.00 V Peak 22.33 14.67 37.00 46.00 -9.00 330.00 V Peak 16.79 16.21 33.00 46.00 -13.00 563.00 V Peak 15.11 20.89 36.00 46.00 -10.00 683.00 V Peak 17.82 22.18 40.00 46.00 -6.00 741.00 V Peak 14.77 22.73 37.50 46.00 -8.50 806.00 V Peak 12.38 23.82 36.20 46.00 -9.80 13.56 H Peak 51.26 12.29 63.55 124.00 -56.45 264.00 H Peak 26.78 14.52 41.30 46.00 -4.70 272.00 H Peak 24.43 14.67 39.10 46.00 -6.90 297.00 H Peak 21.42 15.28 36.70 46.00 -9.30 522.00 H Peak 13.26 20.04 33.30 46.00 -12.70 579.02 H Peak 17.85 21.22 39.07 46.00 -6.93 652.00 H Peak 19.37 22.13 41.50 46.00 -4.50 Remark: 1. Measuring frequencies from 9kHz to the 1GHz. 2. Radiated emissions measured in frequency range from 9kHz to 1000MHz were made with an instrument using peak/quasi-peak/average detector mode. 3. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with “ N/A ” remark, if no specific emissions from the EUT are recorded (ie: margin>20dB from the applicable limit) and considered that's already beyond the background noise floor. 4. Margin (dB) = Result (dBuV/m) – Limit (dBuV/m). Page 16 Rev. 00

Compliance Certification Services Inc. Report No: 70706101-RP1 FCC ID: Q3N-85002 Date of Issue: July 16, 2007 7.2.1 FREQUENCY STABILITY LIMIT According to §15.207(e), the frequency tolerance of the carrier signal shall be maintained within +/- 0.01% of the operating frequency over a temperature variation of –20 degrees to +50 degrees C at normal supply voltage, and for a variation in the primary supply voltage from 85% to 115% of the rated supply voltage at a temperature of 20 degrees C. For battery operated equipment, the equipment tests shall be performed using a new battery. Test Configuration Temperature and Voltage Measurement (under normal and extreme test conditions) Temperature Chamber Spectrum Analyzer EUT AC/DC Power supply TEST PROCEDURE 1. Place the EUT on the table and set it in the transmitting mode. 2. Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the spectrum analyzer. 3. Set the environment into appropriate environment. 4. Set the spectrum analyzer as RBW=1kHz, VBW = RBW, Span = 200kHz, Sweep = auto. 5. Mark the peak frequency and measure the frequency tolerance using frequency counter function. 6. Repeat until all the results are investigated. Page 17 Rev. 00

Compliance Certification Services Inc. Report No: 70706101-RP1 FCC ID: Q3N-85002 Date of Issue: July 16, 2007 TEST RESULTS No non-compliance noted Temperature Variations Measured Delta Temp. Voltage Tolerance Limit Margin Result Frequency Frequency (oC) (V) (%) (±%) (%) (Pass/Fail) (MHz) (Hz) -20 13.560500 500 0.003687 0.01 -0.006313 Pass -10 13.560638 638 0.004705 0.01 -0.005295 Pass 0 13.560490 490 0.003614 0.01 -0.006386 Pass 10 13.560300 300 0.002212 0.01 -0.007788 Pass 3.7 20 13.560540 540 0.003982 0.01 -0.006018 Pass 30 13.560380 380 0.002802 0.01 -0.007198 Pass 40 13.560300 300 0.002212 0.01 -0.007788 Pass 50 13.560420 420 0.003097 0.01 -0.006903 Pass Voltage Variations Measured Delta Temp. Voltage Tolerance Limit Margin Result Frequency Frequency (oC) (V) (%) (±%) (%) (Pass/Fail) (MHz) (Hz) 4.25 13.560420 420 0.003097 0.01 -0.006903 Pass 20 3.7 13.560540 540 0.003982 0.01 -0.006018 Pass 3.14 13.560220 220 0.001622 0.01 -0.008378 Pass Page 18 Rev. 00

Compliance Certification Services Inc. Report No: 70706101-RP1 FCC ID: Q3N-85002 Date of Issue: July 16, 2007 7.3 POWERLINE CONDUCTED EMISSIONS LIMIT According to §15.207(a), except as shown in paragraphs (b) and (c) of this section, for an intentional radiator that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed the limits in the following table, as measured using a 50 µH/50 ohms line impedance stabilization network (LISN). Compliance with the provisions of this paragraph shall be based on the measurement of the radio frequency voltage between each power line and ground at the power terminal. The lower limit applies at the boundary between the frequency ranges. Limits Frequency Range (dBµV) (MHz) Quasi-peak Average 0.15 to 0.50 66 to 56* 56 to 46* 0.50 to 5 56 46 5 to 30 60 50 * Decreases with the logarithm of the frequency. Test Procedure 1. The EUT was placed on a table, which is 0.8m above ground plane. 2. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 3. Repeat above procedures until all frequency measured were complete. Page 19 Rev. 00

Compliance Certification Services Inc. Report No: 70706101-RP1 FCC ID: Q3N-85002 Date of Issue: July 16, 2007 TEST RESULTS The initial step in collecting conducted data is a spectrum analyzer peak scan of the measurement range. Significant peaks are then marked as shown on the following data page, and these signals are then quasi-peaked. Operation Mode: Normal Link Test Date: July 11, 2007 Temperature: 26°C Tested by: Arno Hsieh Humidity: 54% RH QP AV Corr. QP AV QP AV QP AV Freq. Reading Reading factor Result Result Limit Limit Margin Margin Note (MHz) (dBuV) (dBuV) (dB) (dBuV) (dBuV) (dBuV) (dBuV) (dB) (dB) 0.29 29.24 12.75 0.20 29.44 12.95 60.52 50.52 -31.08 -37.57 L1 0.81 12.07 -5.53 0.10 12.17 -5.43 56.00 46.00 -43.83 -51.43 L1 1.27 11.26 -4.80 0.13 11.39 -4.67 56.00 46.00 -44.61 -50.67 L1 4.77 15.17 3.65 0.40 15.57 4.05 56.00 46.00 -40.43 -41.95 L1 18.15 18.14 8.09 1.43 19.57 9.52 60.00 50.00 -40.43 -40.48 L1 30.00 24.84 16.17 1.90 26.74 18.07 60.00 50.00 -33.26 -31.93 L1 0.23 33.33 18.82 0.20 33.53 19.02 62.45 52.45 -28.92 -33.43 L2 0.47 21.09 3.69 0.13 21.22 3.82 56.51 46.51 -35.29 -42.69 L2 1.35 11.93 -0.11 0.14 12.07 0.03 56.00 46.00 -43.93 -45.97 L2 1.87 16.88 5.30 0.19 17.07 5.49 56.00 46.00 -38.93 -40.51 L2 5.55 14.11 4.47 0.35 14.46 4.82 60.00 50.00 -45.54 -45.18 L2 13.57 31.42 7.32 1.01 32.43 8.33 60.00 50.00 -27.57 -41.67 L2 Remark: 1. Measuring frequencies from 0.15 MHz to 30MHz. 2. The emissions measured in frequency range from 0.15 MHz to 30MHz were made with an instrument using Quasi-peak detector and average detector. 3. The IF bandwidth of SPA between 0.15MHz and 30MHz was 10kHz; the IF bandwidth of Test Receiver between 0.15MHz and 30MHz was 9kHz; 4. L1 = Line One (Live Line) / L2 = Line Two (Neutral Line) Page 20 Rev. 00

Compliance Certification Services Inc. Report No: 70706101-RP1 FCC ID: Q3N-85002 Date of Issue: July 16, 2007 Test Plots Conducted emissions (Line 1) Conducted emissions (Line 2) Page 21 Rev. 00


Document Created: 2007-07-26 15:00:15
Document Modified: 2007-07-26 15:00:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC