Antenna Description

FCC ID: Q23104001

Operational Description

Download: PDF
FCCID_428131

!Notice (other) 1. Cleaning Conditions: The total cleaning time of soaking, ultrasonic and steam methods should be within 5 minutes. Consult with Murata concerning the cleaning solvent. In order to totally abolish ODC (Freon, Trichrolethan), Murata has carried out testing on non-cleaning and water cleaning (water- soluble flux, water-soluble cream solder, water-based cleaning solvent). Therefore, be sure to contact Murata beforehand for details when applying any of the above mentioned cleaning fluid. The ultrasonic cleaning conditions are indicated below : Power 20 W per liter max. Frequency 50 ~ 60 kHz Temperature 40 deg.C max. If the ultrasonic output power is too high, the PCB may resonate and products mounted on the PCB may be damaged. The ultrasonic cleaning conditions may change depending on the size of the vessel and the size of the PCB. Contact Murata regarding conditions other than those stated above. Be sure to completely dry up products immediately after cleaning. 2. Operational Environment Conditions: Products are designed to work for electronic products under normal environmental conditions (ambient temperature, humidity and pressure). Therefore, products have no problems to be used under the similar conditions to the above- mentioned. However, if products are used under the following circumstances, it may damage products and leakage of electricity and abnormal temperature may occur - In an atmosphere containing corrosive gas ( Cl2, NH3, SOx, NOx etc.). - In an atmosphere containing combustible and volatile gases. - Dusty place. - Direct sunlight place. - Water splashing place. - Humid place where water condenses. - Freezing place. If there are possibilities for products to be used under the preceding clause, consult with Murata before actual use. Be sure to completely dry up products immediately after cleaning.


Document Created: 2000-02-02 16:10:44
Document Modified: 2000-02-02 16:10:44
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC