Test Report (DTS-WLAN)_spot check.pdf

FCC ID: PZWBHT1800Q

Test Report

Download: PDF
FCCID_4163322

FCC Test Report (Spot Check) Report No.: RF180102C33C-38 FCC ID: PZWBHT1800Q Original FCC ID: PZWBHT1700BQL Model: BHT-1800QWB-3 Series Model: BHT-1800QWB-1, BHT-1800QWB-2 (Refer to item 3.1 for the more details) Received Date: Jan. 02, 2018 Test Date: Jan. 23 ~ Jul. 18, 2018 Issued Date: Jul. 24, 2018 Applicant: DENSO WAVE INCORPORATED Address: 1, Yoshiike, Kusagi, Agui-cho, Chita-gun, Aichi, 470-2297 Japan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. Test Location: No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) FCC Registration/ 788550 / TW0003 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF180102C33C-38 Page No. 1 / 23 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail............................................................................. 9 3.3 Duty Cycle of Test Signal .................................................................................................................. 10 3.4 Description of Support Units .............................................................................................................. 11 3.4.1 Configuration of System under Test ................................................................................................... 11 3.5 General Description of Applied Standards ......................................................................................... 11 4 Test Types and Results ...................................................................................................................... 12 4.1 6dB Bandwidth Measurement ........................................................................................................... 12 4.1.1 Limits of 6dB Bandwidth Measurement ............................................................................................. 12 4.1.2 Test Setup .......................................................................................................................................... 12 4.1.3 Test Instruments ................................................................................................................................ 12 4.1.4 Test Procedure .................................................................................................................................. 12 4.1.5 Deviation fromTest Standard ............................................................................................................. 12 4.1.6 EUT Operating Conditions................................................................................................................. 12 4.1.7 Test Result ......................................................................................................................................... 13 4.2 Conducted Output Power Measurement........................................................................................... 14 4.2.1 Limits of Conducted Output Power Measurement ............................................................................ 14 4.2.2 Test Setup .......................................................................................................................................... 14 4.2.3 Test Instruments ................................................................................................................................ 14 4.2.4 Test Procedures................................................................................................................................. 14 4.2.5 Deviation from Test Standard ............................................................................................................ 14 4.2.6 EUT Operating Conditions................................................................................................................. 14 4.2.7 Test Results ....................................................................................................................................... 15 4.3 Power Spectral Density Measurement .............................................................................................. 17 4.3.1 Limits of Power Spectral Density Measurement ............................................................................... 17 4.3.2 Test Setup .......................................................................................................................................... 17 4.3.3 Test Instruments ................................................................................................................................ 17 4.3.4 Test Procedure .................................................................................................................................. 17 4.3.5 Deviation from Test Standard ............................................................................................................ 17 4.3.6 EUT Operating Condition .................................................................................................................. 17 4.3.7 Test Results ....................................................................................................................................... 18 4.4 Conducted Out of Band Emission Measurement .............................................................................. 19 4.4.1 Limits of Conducted Out of Band Emission Measurement ............................................................... 19 4.4.2 Test Setup .......................................................................................................................................... 19 4.4.3 Test Instruments ................................................................................................................................ 19 4.4.4 Test Procedure .................................................................................................................................. 19 4.4.5 Deviation from Test Standard ............................................................................................................ 19 4.4.6 EUT Operating Condition .................................................................................................................. 20 4.4.7 Test Results ....................................................................................................................................... 20 5 Pictures of Test Arrangements .......................................................................................................... 22 Appendix – Information of the Testing Laboratories ................................................................................. 23 Report No.: RF180102C33C-38 Page No. 2 / 23 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

Release Control Record Issue No. Description Date Issued RF180102C33C-38 Original release Jul. 24, 2018 Report No.: RF180102C33C-38 Page No. 3 / 23 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

1 Certificate of Conformity Product: Barcode Handy Terminal, 2D Code Handy Terminal Brand: DENSO Model: BHT-1800QWB-3 Series Model: BHT-1800QWB-1, BHT-1800QWB-2 (Refer to item 3.1 for the more details) Sample Status: Engineering sample Applicant: DENSO WAVE INCORPORATED Test Date: Jan. 23 ~ Jul. 18, 2018 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10:2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Jul. 24, 2018 Pettie Chen / Senior Specialist Approved by : , Date: Jul. 24, 2018 Bruce Chen / Project Engineer Report No.: RF180102C33C-38 Page No. 4 / 23 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (Section 15.247) FCC Test Item Result Remarks Clause 15.247(d) Antenna Port Emission Pass Meet the requirement of limit. 15.247(a)(2) 6dB bandwidth Pass Meet the requirement of limit. 15.247(b) Conducted power Pass Meet the requirement of limit. 15.247(e) Power Spectral Density Pass Meet the requirement of limit. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Expanded Uncertainty Measurement Frequency (k=2) (±) Conducted Emissions at mains ports 150kHz ~ 30MHz 2.94 dB 30MHz ~ 200MHz 3.63 dB Radiated Emissions up to 1 GHz 200MHz ~1000MHz 3.64 dB 1GHz ~ 18GHz 2.29 dB Radiated Emissions above 1 GHz 18GHz ~ 40GHz 2.29 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF180102C33C-38 Page No. 5 / 23 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

3 General Information 3.1 General Description of EUT Product Barcode Handy Terminal, 2D Code Handy Terminal Brand DENSO Model BHT-1800QWB-3 Series Model BHT-1800QWB-1, BHT-1800QWB-2 Model Difference Refer to Note Sample Status Engineering sample 3.85Vdc (battery) Power Supply Rating 12Vdc (Cradle) CCK, DQPSK, DBPSK for DSSS Modulation Type 16QAM, QPSK, BPSK for OFDM Modulation Technology DSSS, OFDM 802.11b:11.0/ 5.5/ 2.0/ 1.0Mbps Transfer Rate 802.11g: 54.0/ 48.0/ 36.0/ 24.0/ 18.0/ 12.0/ 9.0/ 6.0Mbps 802.11n: up to 150Mbps Operating Frequency 2412 ~ 2462MHz 11 for 802.11b, 802.11g, 802.11n (HT20) Number of Channel 7 for 802.11n (HT40) Output Power 194.536mW Antenna Type Refer to note Antenna Connector Refer to note Accessory Device NA Data Cable Supplied NA Note: 1. Exhibit prepared for FCC Spot Check Verification report, the format, test items and amount of spot-check test data are decided by applicant's engineering judgment, for more details pleae refer to declaration letter exhibit. 2. All models are listed as below. Software LCD WLAN / NFC Audio Model Name base module CPU Main Sub Ear OS 5" WLAN NFC speaker Receiver MIC MIC phone BHT-1800QWB-3 5inch WLAN/BT APQ8009 Android ○ ○ ○ ○ ○ ○ ○ ○ BHT-1800QWB-1 5inch WLAN/BT APQ8009 Android ○ ○ ○ ○ BHT-1800QWB-2 5inch WLAN/BT APQ8009 Android ○ ○ ○ ○ ○ ○ ○ Sensor Charge Reading Model Name base module wireless Camera Camera IR Reader 2D charge (rear) (front) BHT-1800QWB-3 5inch WLAN/BT ○ ○ ○ ○ ○ BHT-1800QWB-1 5inch WLAN/BT ○ ○ BHT-1800QWB-2 5inch WLAN/BT ○ ○ ○ ○ *Model: BHT-1800QWB-3 was chosen for the final tests. *NFC Limited module (include WPC) (Brand: DENSO, Model: DWI003, FCC ID: PZWDWI003) collocated in EUT (model: BHT-1800QWB-3). Report No.: RF180102C33C-38 Page No. 6 / 23 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

3. The EUT provides 1 completed transmitter and 1 receiver. Modulation Mode TX Function 802.11b 1TX 802.11g 1TX 802.11n (HT20) 1TX 802.11n (HT40) 1TX 4. The EUT with follow antennas gain is listed as table below. Cable Cable Length Antenna Gain(dBi) Frequency range Connecter Loss(dB) Brand Antenna Type (External Including cable loss (MHz to MHz) Type (External only) only) Metal 2.39 2.4~2.4835GHz PIFA 1 30cm shrapnel Metal 5.03 5.15~5.25GHz PIFA 1.7 30cm shrapnel Metal WHAYU 4.89 5.25~5.35GHz PIFA 1.7 30cm shrapnel Metal 4.98 5.47~5.725GHz PIFA 1.7 30cm shrapnel Metal 4.11 5.725~5.850GHz PIFA 1.7 30cm shrapnel 5. The EUT consumes power from the following battery. Battery (For BHT-1800 Used) Brand DENSO Model BT-180LA Rating 2900mAh, 3.85Vdc,11.165Wh 6. The client provides the following cradles for tests. (Support unit only) LAN Cradle (For BHT-1800 Used) (Support unit) Brand DENSO Model CU-BL-18 Output Power 12Vdc, 4.16A, 50W USB Cradle (For BHT-1800 Used) (Support unit) Brand DENSO Model CU-BU1-18 Output Power 12Vdc, 4.16A, 50W Adapter for cradle (Support unit) Brand FSP GROUP INC. Model FSP050-DBAE1 Input Power 100-240Vac, 1.5A, 50/60Hz Output Power 12Vdc, 4.16A, 50W Power Line 1.2m non-shielded DC cable with 1 core attached on adapter *After pre-testing, USB cradle is the worst case for the final tests. Report No.: RF180102C33C-38 Page No. 7 / 23 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

3.2 Description of Test Modes 11 channels are provided for 802.11b, 802.11g and 802.11n (HT20): Channel Frequency Channel Frequency 1 2412MHz 7 2442MHz 2 2417MHz 8 2447MHz 3 2422MHz 9 2452MHz 4 2427MHz 10 2457MHz 5 2432MHz 11 2462MHz 6 2437MHz 7 channels are provided for 802.11n (HT40): Channel Frequency Channel Frequency 3 2422MHz 7 2442MHz 4 2427MHz 8 2447MHz 5 2432MHz 9 2452MHz 6 2437MHz Report No.: RF180102C33C-38 Page No. 8 / 23 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

3.2.1 Test Mode Applicability and Tested Channel Detail EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE RE1G RE<1G PLC APCM A - - - √ Power from battery B - - - - Power from Cradle Where RE1G: Radiated Emission above 1GHz & RE<1G: Radiated Emission below 1GHz Bandedge Measurement PLC: Power Line Conducted Emission APCM: Antenna Port Conducted Measurement Note: “-” means no effect. Antenna Port Conducted Measurement: This item includes all test value of each mode, but only includes spectrum plot of worst value of each mode. Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT AVAILABLE TESTED MODULATION MODULATION DATA RATE CONFIGURE MODE CHANNEL CHANNEL TECHNOLOGY TYPE (Mbps) MODE A 802.11b 1 to 11 1, 6, 11 DSSS DBPSK 1.0 A 802.11g 1 to 11 1, 6, 11 OFDM BPSK 6.0 Test Condition: APPLICABLE TO ENVIRONMENTAL CONDITIONS INPUT POWER TESTED BY APCM 25deg. C, 60%RH 120Vac, 60Hz Chris Lin Report No.: RF180102C33C-38 Page No. 9 / 23 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

3.3 Duty Cycle of Test Signal Duty cycle of test signal is > 98 %, duty factor is not required. Duty cycle of test signal is < 98%, duty factor shall be considered. 802.11b: Duty cycle = 8.215/8.425 = 0.975, Duty factor = 10 * log(1/0.975) = 0.11 802.11g: Duty cycle = 1.355/1.585 = 0.855, Duty factor = 10 * log(1/0.855) = 0.68 802.11b 802.11g Report No.: RF180102C33C-38 Page No. 10 / 23 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

3.4 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. FCC ID Remarks A. Notebook DELL E5430 2RL3YW1 FCC DoC Approved - B. Cradle DENSO CU-BU1-18 NA NA Provided by manufacturer C. Adapter FSP GROUP INC. FSP050-DBAE1 NA NA Provided by manufacturer Note: All power cords of the above support units are non-shielded (1.8m). Shielding ID Descriptions Qty. Length (m) Cores (Qty.) Remarks (Yes/No) 1. USB cable 1 0.5 Y 0 - 2. DC cable 1 1.2 N 1 Provided by manufacturer 3.4.1 Configuration of System under Test Test Mode A EUT Test Mode B Cradle (B) Battery EUT (2) Adapter (C) (1) Notebook (A) 3.5 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) KDB 558074 D01 15.247 Meas Guidance v05 ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. Report No.: RF180102C33C-38 Page No. 11 / 23 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4 Test Types and Results 4.1 6dB Bandwidth Measurement 4.1.1 Limits of 6dB Bandwidth Measurement The minimum of 6dB Bandwidth Measurement is 0.5 MHz. 4.1.2 Test Setup Spectrum EUT Attenuator Analyzer 4.1.3 Test Instruments Description & Model No. Serial No. Cal. Date Cal. Due Manufacturer Spectrum Analyzer FSP40 100040 Aug. 18, 2017 Aug. 17, 2018 ROHDE & SCHWARZ High Speed Peak Power ML2495A 0824012 Aug. 18, 2017 Aug. 17, 2018 Meter Power Sensor MA2411B 0738171 Aug. 18, 2017 Aug. 17, 2018 4.1.4 Test Procedure a. Set resolution bandwidth (RBW) = 100kHz b. Set the video bandwidth (VBW) ≥ 3 x RBW, Detector = average. c. Trace mode = max hold. d. Sweep = auto couple. e. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission 4.1.5 Deviation fromTest Standard No deviation. 4.1.6 EUT Operating Conditions The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF180102C33C-38 Page No. 12 / 23 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.1.7 Test Result FCC ID: PZWBHT1700BQL (initial) 802.11b 6dB Bandwidth Minimum Limit Channel Frequency (MHz) Pass / Fail (MHz) (MHz) 11 2462 9.11 0.5 Pass Spectrum Plot of Worst Value 802.11b FCC ID: PZWBHT1800Q (new) 802.11b 6dB Bandwidth Minimum Limit Channel Frequency (MHz) Pass / Fail (MHz) (MHz) 11 2462 9.03 0.5 Pass Spectrum Plot of Worst Value 802.11b Report No.: RF180102C33C-38 Page No. 13 / 23 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.2 Conducted Output Power Measurement 4.2.1 Limits of Conducted Output Power Measurement For systems using digital modulation in the 2400–2483.5 MHz bands: 1 Watt (30dBm) 4.2.2 Test Setup EUT Power Sensor Power Meter Attenuator 4.2.3 Test Instruments Refer to section 4.1.3 to get information of above instrument. 4.2.4 Test Procedures A peak power sensor was used on the output port of the EUT. A power meter was used to read the response of the peak power sensor. Record the power level. 4.2.5 Deviation from Test Standard No deviation. 4.2.6 EUT Operating Conditions Same as Item 4.1.6. Report No.: RF180102C33C-38 Page No. 14 / 23 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.2.7 Test Results FCC ID: PZWBHT1700BQL (initial) 802.11b Frequency Peak Power Peak Power Channel Limit (dBm) Pass / Fail (MHz) (mW) (dBm) 1 2412 126.765 21.03 30 Pass 6 2437 127.057 21.04 30 Pass 11 2462 128.529 21.09 30 Pass 802.11g Frequency Peak Power Peak Power Channel Limit (dBm) Pass / Fail (MHz) (mW) (dBm) 1 2412 194.536 22.89 30 Pass 6 2437 190.985 22.81 30 Pass 11 2462 192.752 22.85 30 Pass 802.11b Average Power Average Power Channel Frequency (MHz) (mW) (dBm) 1 2412 76.033 18.81 6 2437 66.834 18.25 11 2462 65.013 18.13 802.11g Average Power Average Power Channel Frequency (MHz) (mW) (dBm) 1 2412 45.186 16.55 6 2437 46.774 16.70 11 2462 48.641 16.87 Report No.: RF180102C33C-38 Page No. 15 / 23 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

FCC ID: PZWBHT1800Q (new) 802.11b Frequency Peak Power Peak Power Channel Limit (dBm) Pass / Fail (MHz) (mW) (dBm) 1 2412 122.744 20.89 30 Pass 6 2437 124.451 20.95 30 Pass 11 2462 125.603 20.99 30 Pass 802.11g Frequency Peak Power Peak Power Channel Limit (dBm) Pass / Fail (MHz) (mW) (dBm) 1 2412 187.068 22.72 30 Pass 6 2437 185.353 22.68 30 Pass 11 2462 184.927 22.67 30 Pass 802.11b Average Power Average Power Channel Frequency (MHz) (mW) (dBm) 1 2412 72.111 18.58 6 2437 62.23 17.94 11 2462 61.235 17.87 802.11g Average Power Average Power Channel Frequency (MHz) (mW) (dBm) 1 2412 41.783 16.21 6 2437 43.053 16.34 11 2462 45.186 16.55 Report No.: RF180102C33C-38 Page No. 16 / 23 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.3 Power Spectral Density Measurement 4.3.1 Limits of Power Spectral Density Measurement The Maximum of Power Spectral Density Measurement is 8dBm. 4.3.2 Test Setup Spectrum EUT Attenuator Analyzer 4.3.3 Test Instruments Refer to section 4.1.3 to get information of above instrument. 4.3.4 Test Procedure a. Set analyzer center frequency to DTS channel center frequency. b. Set the span to 1.5 times the DTS bandwidth. c. Set the RBW to: 3 kHz ≤ RBW ≤ 100 kHz. d. Set the VBW ≥ 3 × RBW. e. Detector = peak. f. Sweep time = auto couple. g. Trace mode = max hold. h. Allow trace to fully stabilize. i. Use the peak marker function to determine the maximum amplitude level within the RBW. 4.3.5 Deviation from Test Standard No deviation. 4.3.6 EUT Operating Condition Same as Item 4.1.6 Report No.: RF180102C33C-38 Page No. 17 / 23 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.3.7 Test Results FCC ID: PZWBHT1700BQL (initial) 802.11b Channel Frequency (MHz) PSD (dBm/3kHz) Limit (dBm/3kHz) Pass / Fail 11 2462 -4.34 8.00 Pass Spectrum Plot of Worst Value 802.11b FCC ID: PZWBHT1800Q (new) 802.11b Channel Frequency (MHz) PSD (dBm/3kHz) Limit (dBm/3kHz) Pass / Fail 11 2462 -4.56 8.00 Pass Spectrum Plot of Worst Value 802.11b Report No.: RF180102C33C-38 Page No. 18 / 23 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.4 Conducted Out of Band Emission Measurement 4.4.1 Limits of Conducted Out of Band Emission Measurement Below -20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.4.2 Test Setup SPECTRUM EUT Attenuator ANALYZER 4.4.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.4.4 Test Procedure MEASUREMENT PROCEDURE REF a. Set the RBW = 100 kHz. b. Set the VBW ≥ 300 kHz. c. Detector = Peak. d. Sweep time = auto couple. e. Trace mode = max hold. f. Allow trace to fully stabilize. g. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. MEASUREMENT PROCEDURE OOBE a. Set RBW = 100 kHz. b. Set VBW ≥ 300 kHz. c. Ensure that the number of measurement points ≥ span/RBW d. According to measurement points to set differ measurement span. e. Detector = Peak. f. Trace Mode = max hold. g. Sweep = auto couple. 4.4.5 Deviation from Test Standard No deviation. Report No.: RF180102C33C-38 Page No. 19 / 23 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.4.6 EUT Operating Condition Same as Item 4.3.6 4.4.7 Test Results The spectrum plots are attached on the following pages. D1 line indicates the highest level, and D2 line indicates the 20dB offset below D1. It shows compliance with the requirement. Report No.: RF180102C33C-38 Page No. 20 / 23 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

FCC ID: PZWBHT1700BQL (initial) 802.11b CH 11 FCC ID: PZWBHT1800Q (new) 802.11b CH 11 Report No.: RF180102C33C-38 Page No. 21 / 23 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF180102C33C-38 Page No. 22 / 23 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

Appendix – Information of the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF180102C33C-38 Page No. 23 / 23 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10


Document Created: 2019-08-31 13:22:10
Document Modified: 2019-08-31 13:22:10
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC