Test Report (DTS-BT LE)_rev5.pdf

FCC ID: PZWBHT1800Q

Test Report

Download: PDF
FCCID_4163317

FCC Test Report Report No.: RF180102C33C-4 FCC ID: PZWBHT1800Q Model: BHT-1800QWB-3 Series Model: BHT-1800QWB-1, BHT-1800QWB-2 (Refer to item 3.1 for the more details) Received Date: Jan. 02, 2018 Test Date: Jan. 22 ~ Apr. 18, 2018 Issued Date: Jun. 06, 2018 Applicant: DENSO WAVE INCORPORATED Address: 1, Yoshiike, Kusagi, Agui-cho, Chita-gun, Aichi, 470-2297 Japan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. Test Location: No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) FCC Registration/ 788550 / TW0003 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF180102C33C-4 Page No. 1 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail............................................................................. 9 3.3 Duty Cycle of Test Signal .................................................................................................................. 10 3.4 Description of Support Units .............................................................................................................. 11 3.4.1 Configuration of System under Test ................................................................................................... 11 3.5 General Description of Applied Standards ......................................................................................... 11 4 Test Types and Results ...................................................................................................................... 12 4.1 Radiated Emission and Bandedge Measurement............................................................................. 12 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 12 4.1.2 Test Instruments ................................................................................................................................ 13 4.1.3 Test Procedures................................................................................................................................. 14 4.1.4 Deviation from Test Standard ............................................................................................................ 15 4.1.5 Test Set Up ........................................................................................................................................ 15 4.1.6 EUT Operating Conditions................................................................................................................. 16 4.1.7 Test Results ....................................................................................................................................... 17 4.2 Conducted Emission Measurement .................................................................................................. 22 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 22 4.2.2 Test Instruments ................................................................................................................................ 22 4.2.3 Test Procedures................................................................................................................................. 23 4.2.4 Deviation from Test Standard ............................................................................................................ 23 4.2.5 Test Setup .......................................................................................................................................... 23 4.2.6 EUT Operating Conditions................................................................................................................. 23 4.2.7 Test Results ....................................................................................................................................... 24 4.3 6dB Bandwidth Measurement ........................................................................................................... 26 4.3.1 Limits of 6dB Bandwidth Measurement ............................................................................................. 26 4.3.2 Test Setup .......................................................................................................................................... 26 4.3.3 Test Instruments ................................................................................................................................ 26 4.3.4 Test Procedure .................................................................................................................................. 26 4.3.5 Deviation fromTest Standard ............................................................................................................. 26 4.3.6 EUT Operating Conditions................................................................................................................. 26 4.3.7 Test Result ......................................................................................................................................... 26 4.4 Conducted Output Power Measurement........................................................................................... 27 4.4.1 Limits of Conducted Output Power Measurement ............................................................................ 27 4.4.2 Test Setup .......................................................................................................................................... 27 4.4.3 Test Instruments ................................................................................................................................ 27 4.4.4 Test Procedures................................................................................................................................. 27 4.4.5 Deviation from Test Standard ............................................................................................................ 27 4.4.6 EUT Operating Conditions................................................................................................................. 27 4.4.7 Test Results ....................................................................................................................................... 27 4.5 Power Spectral Density Measurement .............................................................................................. 28 4.5.1 Limits of Power Spectral Density Measurement ............................................................................... 28 4.5.2 Test Setup .......................................................................................................................................... 28 4.5.3 Test Instruments ................................................................................................................................ 28 4.5.4 Test Procedure .................................................................................................................................. 28 4.5.5 Deviation from Test Standard ............................................................................................................ 28 4.5.6 EUT Operating Condition .................................................................................................................. 28 Report No.: RF180102C33C-4 Page No. 2 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.5.7 Test Results ....................................................................................................................................... 28 4.6 Conducted Out of Band Emission Measurement .............................................................................. 29 4.6.1 Limits of Conducted Out of Band Emission Measurement ............................................................... 29 4.6.2 Test Setup .......................................................................................................................................... 29 4.6.3 Test Instruments ................................................................................................................................ 29 4.6.4 Test Procedure .................................................................................................................................. 29 4.6.5 Deviation from Test Standard ............................................................................................................ 30 4.6.6 EUT Operating Condition .................................................................................................................. 30 4.6.7 Test Results ....................................................................................................................................... 30 5 Pictures of Test Arrangements .......................................................................................................... 31 Appendix – Information of the Testing Laboratories ................................................................................. 32 Report No.: RF180102C33C-4 Page No. 3 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

Release Control Record Issue No. Description Date Issued RF180102C33C-4 Original release Jun. 06, 2018 Report No.: RF180102C33C-4 Page No. 4 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

1 Certificate of Conformity Product: Barcode Handy Terminal, 2D Code Handy Terminal Brand: DENSO Model: BHT-1800QWB-3 Series Model: BHT-1800QWB-1, BHT-1800QWB-2 (Refer to item 3.1 for the more details) Sample Status: Engineering sample Applicant: DENSO WAVE INCORPORATED Test Date: Jan. 23 ~ Apr. 18, 2018 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10:2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Jun. 06, 2018 Pettie Chen / Senior Specialist Approved by : , Date: Jun. 06, 2018 Bruce Chen / Project Engineer Report No.: RF180102C33C-4 Page No. 5 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (Section 15.247) FCC Test Item Result Remarks Clause Meet the requirement of limit. 15.207 AC Power Conducted Emission Pass Minimum passing margin is -7.22dB at 0.48678MHz 15.205 / Meet the requirement of limit. Radiated Emissions and Band Edge 15.209 / Pass Minimum passing margin is -4.3dB at Measurement 15.247(d) 278.08MHz. 15.247(d) Antenna Port Emission Pass Meet the requirement of limit. (Note) 15.247(a)(2) 6dB bandwidth Pass Meet the requirement of limit. (Note) 15.247(b) Conducted power Pass Meet the requirement of limit. (Note) 15.247(e) Power Spectral Density Pass Meet the requirement of limit. (Note) Antenna connector is Metal shrapnel 15.203 Antenna Requirement Pass not a standard connector. Note: Refer to FCC ID: PZWBHT1700BQL. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Expanded Uncertainty Measurement Frequency (k=2) (±) Conducted Emissions at mains ports 150kHz ~ 30MHz 2.94 dB 30MHz ~ 200MHz 3.63 dB Radiated Emissions up to 1 GHz 200MHz ~1000MHz 3.64 dB 1GHz ~ 18GHz 2.29 dB Radiated Emissions above 1 GHz 18GHz ~ 40GHz 2.29 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF180102C33C-4 Page No. 6 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

3 General Information 3.1 General Description of EUT Product Barcode Handy Terminal, 2D Code Handy Terminal Brand DENSO Model BHT-1800QWB-3 Series Model BHT-1800QWB-1, BHT-1800QWB-2 Model Difference Refer to Note Sample Status Engineering sample 3.85Vdc (battery) Power Supply Rating 12Vdc (Cradle) Modulation Type GFSK Transfer Rate 1Mbps Operating Frequency 2402 ~ 2480MHz Number of Channel 40 Channel Spacing 2MHz Output Power 2.213mW Antenna Type Refer to note Antenna Connector Refer to note Accessory Device NA Data Cable Supplied NA Note: 1. All models are listed as below. Software LCD WLAN / NFC Audio Model Name base module CPU Main Sub Ear OS 5" WLAN NFC speaker Receiver MIC MIC phone BHT-1800QWB-3 5inch WLAN/BT APQ8009 Android ○ ○ ○ ○ ○ ○ ○ ○ BHT-1800QWB-1 5inch WLAN/BT APQ8009 Android ○ ○ ○ ○ BHT-1800QWB-2 5inch WLAN/BT APQ8009 Android ○ ○ ○ ○ ○ ○ ○ Sensor Charge Reading Model Name base module wireless Camera Camera IR Reader 2D charge (rear) (front) BHT-1800QWB-3 5inch WLAN/BT ○ ○ ○ ○ ○ BHT-1800QWB-1 5inch WLAN/BT ○ ○ BHT-1800QWB-2 5inch WLAN/BT ○ ○ ○ ○ *Model: BHT-1800QWB-3 was chosen for the final tests. *NFC Limited module (include WPC) (Brand: DENSO, Model: DWI003, FCC ID: PZWDWI003) collocated in EUT (model: BHT-1800QWB-3). 2. The EUT with follow antenna gain is listed as table below. Cable Cable Length Antenna Gain(dBi) Frequency range Connecter Loss(dB) Brand Antenna Type (External Including cable loss (MHz to MHz) Type (External only) only) Metal WHAYU 2.39 2.4~2.4835GHz PIFA 1 30cm shrapnel Report No.: RF180102C33C-4 Page No. 7 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

3. The EUT consumes power from the following battery. Battery (For BHT-1800 Used) Brand DENSO Model BT-180LA Rating 2900mAh, 3.85Vdc,11.165Wh 4. The client provides the following cradles for tests. (Support unit only) LAN Cradle (For BHT-1800 Used) (Support unit) Brand DENSO Model CU-BL-18 Output Power 12Vdc, 4.16A, 50W USB Cradle (For BHT-1800 Used) (Support unit) Brand DENSO Model CU-BU1-18 Output Power 12Vdc, 4.16A, 50W Adapter for cradle (Support unit) Brand FSP GROUP INC. Model FSP050-DBAE1 Input Power 100-240Vac, 1.5A, 50/60Hz Output Power 12Vdc, 4.16A, 50W Power Line 1.2m non-shielded DC cable with 1 core attached on adapter *After pre-testing, USB cradle is the worst case for the final tests. 3.2 Description of Test Modes 40 channels are provided to this EUT: Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) 0 2402 10 2422 20 2442 30 2462 1 2404 11 2424 21 2444 31 2464 2 2406 12 2426 22 2446 32 2466 3 2408 13 2428 23 2448 33 2468 4 2410 14 2430 24 2450 34 2470 5 2412 15 2432 25 2452 35 2472 6 2414 16 2434 26 2454 36 2474 7 2416 17 2436 27 2456 37 2476 8 2418 18 2438 28 2458 38 2478 9 2420 19 2440 29 2460 39 2480 Report No.: RF180102C33C-4 Page No. 8 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

3.2.1 Test Mode Applicability and Tested Channel Detail EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE RE1G RE<1G PLC APCM A √ √ - - Power from battery B - √ √ - Power from Cradle RE1G: Radiated Emission above 1GHz & Where RE<1G: Radiated Emission below 1GHz Bandedge Measurement PLC: Power Line Conducted Emission APCM: Antenna Port Conducted Measurement Note: 1. The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on Y-plane. 2. “-” means no effect. 3. APCM refer to FCC ID: PZWBHT1700BQL. Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGUURE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE DATA RATE (Mbps) MODE A 0 to 39 0, 19, 39 GFSK 1 Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGUURE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE DATA RATE (Mbps) MODE A, B 0 to 39 19 GFSK 1 Power Line Conducted Emission Test: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGUURE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE DATA RATE (Mbps) MODE B 0 to 39 19 GFSK 1 Report No.: RF180102C33C-4 Page No. 9 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

Test Condition: APPLICABLE TO ENVIRONMENTAL CONDITIONS INPUT POWER TESTED BY RE1G 25deg. C, 66%RH 120Vac, 60Hz Matthew Yang 23deg. C, 66%RH Willy Cheng RE<1G 120Vac, 60Hz 25deg. C, 70%RH Luis Lee PLC 25deg. C, 75%RH 120Vac, 60Hz Noah Chang 3.3 Duty Cycle of Test Signal Duty cycle = 0.388/0.632=0.614, Duty factor = 10 * log(1/0.614) = 2.12 Report No.: RF180102C33C-4 Page No. 10 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

3.4 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. FCC ID Remarks A. Notebook DELL E5430 2RL3YW1 FCC DoC Approved - B. Cradle DENSO CU-BU1-18 NA NA Provided by manufacturer C. Adapter FSP GROUP INC. FSP050-DBAE1 NA NA Provided by manufacturer Note: All power cords of the above support units are non-shielded (1.8m). Shielding ID Descriptions Qty. Length (m) Cores (Qty.) Remarks (Yes/No) 1. USB cable 1 0.5 Y 0 - 2. DC cable 1 1.2 N 1 Provided by manufacturer 3.4.1 Configuration of System under Test Test Mode A EUT Test Mode B Cradle (B) Battery EUT (2) Adapter (C) (1) Notebook (A) 3.5 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) KDB 558074 D01 15.247 Meas Guidance v05 ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. Report No.: RF180102C33C-4 Page No. 11 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power: Frequencies Field Strength Measurement Distance (meters) (MHz) (microvolts/meter) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 Note: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF180102C33C-4 Page No. 12 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.1.2 Test Instruments Description & Model No. Serial No. Cal. Date Cal. Due Manufacturer Test Receiver ESCI 100424 Oct. 17, 2017 Oct. 16, 2018 ROHDE & SCHWARZ Spectrum Analyzer FSP40 100040 Aug. 18, 2017 Aug. 17, 2018 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-155 Dec. 11, 2017 Dec. 10, 2018 SCHWARZBECK HORN Antenna BBHA 9120D 9120D-1170 Dec. 13, 2017 Dec. 12, 2018 SCHWARZBECK HORN Antenna BBHA 9170 BBHA9170241 Dec. 01, 2017 Nov. 30, 2018 SCHWARZBECK Loop Antenna EM-6879 269 Aug. 11, 2017 Aug. 10, 2018 EMCI Preamplifier 8447D 2944A10631 Aug. 08, 2017 Aug. 07, 2018 Agilent (Below 1GHz) Preamplifier 8449B 3008A01960 Aug. 08, 2017 Aug. 07, 2018 Agilent (Above 1GHz) RF signal cable SUCOFLEX 104 MY 13380+295012/04 Aug. 08, 2017 Aug. 07, 2018 HUBER+SUHNER RF signal cable Cable-CH4-03 SUCOFLEX 104 Aug. 08, 2017 Aug. 07, 2018 HUBER+SUHNER (250724) Software ADT_Radiated_ NA NA NA BV ADT V7.6.15.9.5 Antenna Tower MA 4000 010303 NA NA inn-co GmbH Antenna Tower Controller AT100 AT93021703 NA NA BV ADT Turn Table TT100 TT93021703 NA NA BV ADT Turn Table Controller SC100 SC93021703 NA NA BV ADT 26GHz ~ 40GHz Amplifier 8449B 3008A1960 Aug. 08, 2017 Aug. 07, 2018 Agilent High Speed Peak Power ML2495A 0824012 Aug. 18, 2017 Aug. 17, 2018 Meter Power Sensor MA2411B 0738171 Aug. 18, 2017 Aug. 17, 2018 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 4. 3. The FCC Designation Number is TW0003. The number will be varied with the Lab location and scope as attached. 4. The IC Site Registration No. is IC 7450F-4. Report No.: RF180102C33C-4 Page No. 13 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Parallel, perpendicular, and ground-parallel orientations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. Report No.: RF180102C33C-4 Page No. 14 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.1.4 Deviation from Test Standard No deviation. 4.1.5 Test Set Up For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable EUT& 3m 10m Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF180102C33C-4 Page No. 15 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions Test Mode A a. Set the EUT under transmission condition continuously at specific channel frequency. Test Mode B a. Set the EUT plugged in the cradle and connected with a notebook system via a USB cable and placed on a testing table. b. The notebook system ran a test program (provided by manufacturer) to enable EUT under transmission condition continuously at specific channel frequency. Report No.: RF180102C33C-4 Page No. 16 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.1.7 Test Results Above 1GHz worst-case data: CHANNEL TX Channel 0 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 56.7 PK 74.0 -17.3 3.23 H 252 23.3 33.4 2 2390.00 45.3 AV 54.0 -8.7 3.23 H 252 11.9 33.4 3 *2402.00 93.9 PK 3.13 H 261 60.5 33.4 4 *2402.00 89.5 AV 3.13 H 261 56.1 33.4 5 4804.00 48.1 PK 74.0 -25.9 2.80 H 192 44.2 3.9 6 4804.00 35.1 AV 54.0 -18.9 2.80 H 192 31.2 3.9 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 56.5 PK 74.0 -17.5 1.08 V 270 23.1 33.4 2 2390.00 45.1 AV 54.0 -8.9 1.08 V 270 11.7 33.4 3 *2402.00 93.4 PK 1.04 V 264 60.0 33.4 4 *2402.00 88.9 AV 1.04 V 264 55.5 33.4 5 4804.00 47.8 PK 74.0 -26.2 1.58 V 79 43.9 3.9 6 4804.00 34.8 AV 54.0 -19.2 1.58 V 79 30.9 3.9 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF180102C33C-4 Page No. 17 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

CHANNEL TX Channel 19 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 95.7 PK 3.10 H 268 62.3 33.4 2 *2440.00 91.3 AV 3.10 H 268 57.9 33.4 3 4880.00 47.1 PK 74.0 -26.9 2.77 H 195 43.8 3.3 4 4880.00 17.0 AV 54.0 -37.0 2.77 H 195 13.7 3.3 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 95.0 PK 1.00 V 258 61.6 33.4 2 *2440.00 90.5 AV 1.00 V 258 57.1 33.4 3 4880.00 47.4 PK 74.0 -26.6 1.66 V 84 44.1 3.3 4 4880.00 34.5 AV 54.0 -19.5 1.66 V 84 31.2 3.3 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF180102C33C-4 Page No. 18 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

CHANNEL TX Channel 39 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 93.6 PK 3.25 H 270 60.1 33.5 2 *2480.00 89.1 AV 3.25 H 270 55.6 33.5 3 2483.50 57.1 PK 74.0 -16.9 3.21 H 259 23.6 33.5 4 2483.50 45.3 AV 54.0 -8.7 3.21 H 259 11.8 33.5 5 4960.00 47.4 PK 74.0 -26.6 2.87 H 189 44.0 3.4 6 4960.00 34.5 AV 54.0 -19.5 2.87 H 189 31.1 3.4 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 92.9 PK 1.05 V 262 59.4 33.5 2 *2480.00 88.6 AV 1.05 V 262 55.1 33.5 3 2483.50 57.3 PK 74.0 -16.7 1.07 V 268 23.8 33.5 4 2483.50 45.1 AV 54.0 -8.9 1.07 V 268 11.6 33.5 5 4960.00 47.0 PK 74.0 -27.0 2.80 V 190 43.6 3.4 6 4960.00 16.9 AV 54.0 -37.1 2.80 V 190 13.5 3.4 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF180102C33C-4 Page No. 19 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

Below 1GHz worst-case data: DETECTOR CHANNEL TX Channel 19 Quasi-Peak (QP) FUNCTION FREQUENCY RANGE 30MHz ~ 1GHz TEST MODE A ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 57.12 26.1 QP 40.0 -13.9 2.00 H 268 40.5 -14.4 2 70.73 24.2 QP 40.0 -15.8 2.00 H 5 40.4 -16.2 3 84.34 19.0 QP 40.0 -21.0 2.00 H 69 38.1 -19.1 4 515.97 24.6 QP 46.0 -21.4 1.50 H 16 33.7 -9.1 5 543.19 26.4 QP 46.0 -19.6 1.50 H 43 35.1 -8.7 6 570.41 24.9 QP 46.0 -21.1 1.50 H 16 33.2 -8.3 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 39.62 22.9 QP 40.0 -17.1 1.00 V 258 37.9 -15.0 2 57.12 22.0 QP 40.0 -18.0 1.00 V 119 36.4 -14.4 3 111.56 15.8 QP 43.5 -27.7 1.00 V 260 33.0 -17.2 4 187.39 15.4 QP 43.5 -28.1 1.00 V 220 31.5 -16.1 5 405.15 19.0 QP 46.0 -27.0 1.00 V 244 30.1 -11.1 6 484.86 20.3 QP 46.0 -25.7 1.00 V 138 29.9 -9.6 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF180102C33C-4 Page No. 20 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

DETECTOR CHANNEL TX Channel 19 Quasi-Peak (QP) FUNCTION FREQUENCY RANGE 30MHz ~ 1GHz TEST MODE B ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 57.12 24.5 QP 40.0 -15.5 1.46 H 16 38.9 -14.4 2 70.73 21.9 QP 40.0 -18.1 1.46 H 16 38.1 -16.2 3 84.34 16.3 QP 40.0 -23.7 1.46 H 16 35.4 -19.1 4 278.08 41.7 QP 46.0 -4.3 1.00 H 93 54.9 -13.2 5 356.54 30.1 QP 46.0 -15.9 1.00 H 108 42.1 -12.0 6 407.09 22.6 QP 46.0 -23.4 1.00 H 123 33.6 -11.0 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 39.62 26.9 QP 40.0 -13.1 1.00 V 243 41.9 -15.0 2 59.06 22.6 QP 40.0 -17.4 1.00 V 243 36.9 -14.3 3 146.56 21.3 QP 43.5 -22.2 1.99 V 61 35.3 -14.0 4 276.82 40.9 QP 46.0 -5.1 1.00 V 90 54.2 -13.3 5 348.76 26.8 QP 46.0 -19.2 1.00 V 159 38.9 -12.1 6 549.03 25.5 QP 46.0 -20.5 1.49 V 13 34.1 -8.6 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF180102C33C-4 Page No. 21 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.2 Conducted Emission Measurement 4.2.1 Limits of Conducted Emission Measurement Conducted Limit (dBuV) Frequency (MHz) Quasi-peak Average 0.15 - 0.5 66 - 56 56 - 46 0.50 - 5.0 56 46 5.0 - 30.0 60 50 Note: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 4.2.2 Test Instruments Test Date: Jan. 23, 2018 Description & Manufacturer Model No. Serial No. Cal. Date Cal. Due Test Receiver ESCI 100613 Nov. 23, 2017 Nov. 22, 2018 ROHDE & SCHWARZ RF signal cable (with 10dB PAD) 5D-FB Cable-cond1-01 Sep. 05, 2017 Sep. 04, 2018 Woken LISN ROHDE & SCHWARZ ESH3-Z5 835239/001 Mar. 10, 2017 Mar. 09, 2018 (EUT) LISN ROHDE & SCHWARZ ESH3-Z5 100311 Aug. 15, 2017 Aug. 14, 2018 (Peripheral) Software BV ADT_Cond_ NA NA NA ADT V7.3.7.4 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Shielded Room 1. 3. The VCCI Site Registration No. is C-2040. Report No.: RF180102C33C-4 Page No. 22 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.2.3 Test Procedures a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not recorded. Note: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi-peak detection (QP) and average detection (AV) at frequency 0.15MHz-30MHz. 4.2.4 Deviation from Test Standard No deviation. 4.2.5 Test Setup Vertical Ground Reference Plane Test Receiver EUT 40cm 80cm LISN Horizontal Ground Reference Plane Note: 1.Support units were connected to second LISN. For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT Operating Conditions Same as 4.1.6. Report No.: RF180102C33C-4 Page No. 23 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.2.7 Test Results Quasi-Peak (QP) / Phase Line (L) Detector Function Average (AV) Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15719 10.10 33.26 21.72 43.36 31.82 65.61 55.61 -22.25 -23.79 2 0.20865 10.10 27.10 15.97 37.20 26.07 63.26 53.26 -26.06 -27.19 3 0.47039 10.12 33.40 29.17 43.52 39.29 56.51 46.51 -12.99 -7.22 4 0.85380 10.14 21.94 16.31 32.08 26.45 56.00 46.00 -23.92 -19.55 5 1.22916 10.15 19.43 14.42 29.58 24.57 56.00 46.00 -26.42 -21.43 6 13.07646 10.80 19.63 14.12 30.43 24.92 60.00 50.00 -29.57 -25.08 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF180102C33C-4 Page No. 24 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

Quasi-Peak (QP) / Phase Neutral (N) Detector Function Average (AV) Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.23602 10.11 21.37 9.48 31.48 19.59 62.24 52.24 -30.76 -32.65 2 0.50000 10.12 28.98 21.14 39.10 31.26 56.00 46.00 -16.90 -14.74 3 0.72274 10.12 22.84 16.51 32.96 26.63 56.00 46.00 -23.04 -19.37 4 0.85380 10.13 23.01 16.11 33.14 26.24 56.00 46.00 -22.86 -19.76 5 1.35819 10.15 20.02 14.89 30.17 25.04 56.00 46.00 -25.83 -20.96 6 12.95525 10.64 19.87 14.17 30.51 24.81 60.00 50.00 -29.49 -25.19 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF180102C33C-4 Page No. 25 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.3 6dB Bandwidth Measurement 4.3.1 Limits of 6dB Bandwidth Measurement The minimum of 6dB Bandwidth Measurement is 0.5 MHz. 4.3.2 Test Setup Spectrum EUT Attenuator Analyzer 4.3.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.3.4 Test Procedure a. Set resolution bandwidth (RBW) = 100kHz b. Set the video bandwidth (VBW) ≥ 3 x RBW, Detector = peak. c. Trace mode = max hold. d. Sweep = auto couple. e. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission 4.3.5 Deviation fromTest Standard No deviation. 4.3.6 EUT Operating Conditions The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. 4.3.7 Test Result Refer to FCC ID: PZWBHT1700BQL. Report No.: RF180102C33C-4 Page No. 26 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.4 Conducted Output Power Measurement 4.4.1 Limits of Conducted Output Power Measurement For systems using digital modulation in the 2400–2483.5 MHz bands: 1 Watt (30dBm) 4.4.2 Test Setup EUT Power Sensor Power Meter Attenuator 4.4.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.4.4 Test Procedures A peak power sensor was used on the output port of the EUT. A power meter was used to read the response of the peak power sensor. Record the power level. 4.4.5 Deviation from Test Standard No deviation. 4.4.6 EUT Operating Conditions Same as Item 4.3.6. 4.4.7 Test Results Refer to FCC ID: PZWBHT1700BQL. Report No.: RF180102C33C-4 Page No. 27 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.5 Power Spectral Density Measurement 4.5.1 Limits of Power Spectral Density Measurement The Maximum of Power Spectral Density Measurement is 8dBm. 4.5.2 Test Setup Spectrum EUT Attenuator Analyzer 4.5.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.5.4 Test Procedure a. Set analyzer center frequency to DTS channel center frequency. b. Set the span to 1.5 times the DTS bandwidth. c. Set the RBW to: 3 kHz ≤ RBW ≤ 100 kHz. d. Set the VBW ≥ 3 × RBW. e. Detector = peak. f. Sweep time = auto couple. g. Trace mode = max hold. h. Allow trace to fully stabilize. i. Use the peak marker function to determine the maximum amplitude level within the RBW. 4.5.5 Deviation from Test Standard No deviation. 4.5.6 EUT Operating Condition Same as Item 4.3.6 4.5.7 Test Results Refer to FCC ID: PZWBHT1700BQL. Report No.: RF180102C33C-4 Page No. 28 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.6 Conducted Out of Band Emission Measurement 4.6.1 Limits of Conducted Out of Band Emission Measurement Below -20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.6.2 Test Setup Spectrum EUT Attenuator Analyzer 4.6.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.6.4 Test Procedure MEASUREMENT PROCEDURE REF a. Set the RBW = 100 kHz. b. Set the VBW ≥ 300 kHz. c. Detector = peak. d. Sweep time = auto couple. e. Trace mode = max hold. f. Allow trace to fully stabilize. g. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. MEASUREMENT PROCEDURE OOBE a. Set RBW = 100 kHz. b. Set VBW ≥ 300 kHz. c. Detector = peak. d. Sweep = auto couple. e. Trace Mode = max hold. f. Allow trace to fully stabilize. g. Use the peak marker function to determine the maximum amplitude level. Report No.: RF180102C33C-4 Page No. 29 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.6.5 Deviation from Test Standard No deviation. 4.6.6 EUT Operating Condition Same as Item 4.3.6 4.6.7 Test Results Refer to FCC ID: PZWBHT1700BQL. Report No.: RF180102C33C-4 Page No. 30 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF180102C33C-4 Page No. 31 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

Appendix – Information of the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF180102C33C-4 Page No. 32 / 32 Report Format Version: 6.1.1 Reference No.: 180102C33, 180420C16, 180604C10


Document Created: 2019-01-31 17:13:17
Document Modified: 2019-01-31 17:13:17
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC