RF Exposure Info (SAR)_Appendix A.pdf

FCC ID: PZWBHT1700QG

RF Exposure Info

Download: PDF
FCCID_4176591

FCC SAR Test Report Appendix A. SAR Plots of System Verification The plots for system verification with largest deviation for each SAR system combination are shown as follows. Report Format Version 5.0.0 Issued Date : Oct. 05, 2018 Report No. : SA180604C20

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/07/25 System Check_H750_180725 DUT: Dipole 750 MHz; Type: D750V3; SN: 1013 Communication System: CW; Frequency: 750 MHz;Duty Cycle: 1:1 Medium: H06T09N1_0725 Medium parameters used: f = 750 MHz; σ = 0.885 S/m; εr = 42.46; ρ = 1000 kg/m3 Ambient Temperature：23.7 ℃ ; Liquid Temperature：23.4 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3898; ConvF(10.63, 10.63, 10.63); Calibrated: 2018/06/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: Twin SAM Phantom_1653; Type: QD000P40; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=250mW/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.72 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 57.86 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 3.11 W/kg SAR(1 g) = 2.01 W/kg; SAR(10 g) = 1.32 W/kg Maximum value of SAR (measured) = 2.72 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/07/25 System Check_H835_180725 DUT: Dipole 835 MHz; Type: D835V2; SN: 4d121 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: H07T10N1_0725 Medium parameters used: f = 835 MHz; σ = 0.914 S/m; εr = 43.02; ρ = 1000 kg/m3 Ambient Temperature：23.7 ℃ ; Liquid Temperature：23.4 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3898; ConvF(10.07, 10.07, 10.07); Calibrated: 2018/06/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: Twin SAM Phantom_1653; Type: QD000P40; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 3.12 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 54.92 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 3.52 W/kg SAR(1 g) = 2.35 W/kg; SAR(10 g) = 1.55 W/kg Maximum value of SAR (measured) = 3.13 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/07/25 System Check_H1750_180725 DUT: Dipole 1750 MHz; Type: D1750V2; SN: 1055 Communication System: CW; Frequency: 1750 MHz;Duty Cycle: 1:1 Medium: H16T20N1_0725 Medium parameters used: f = 1750 MHz; σ = 1.328 S/m; εr = 41.493; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.1 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3898; ConvF(8.68, 8.68, 8.68); Calibrated: 2018/06/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: Twin SAM Phantom_1653; Type: QD000P40; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 14.4 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 100.8 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 16.9 W/kg SAR(1 g) = 9.26 W/kg; SAR(10 g) = 4.94 W/kg Maximum value of SAR (measured) = 14.2 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/07/25 System Check_H1900_180725 DUT: Dipole 1900 MHz; Type: D1900V2; SN: 5d036 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: H16T20N1_0725 Medium parameters used: f = 1900 MHz; σ = 1.459 S/m; εr = 40.97; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.1 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3898; ConvF(8.35, 8.35, 8.35); Calibrated: 2018/06/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: Twin SAM Phantom_1653; Type: QD000P40; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 16.3 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 109.7 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 20.0 W/kg SAR(1 g) = 10.6 W/kg; SAR(10 g) = 5.49 W/kg Maximum value of SAR (measured) = 16.6 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/07/25 System Check_H2450_180725 DUT: Dipole 2450 MHz; Type: D2450V2; SN: 869 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: H19T27N1_0725 Medium parameters used: f = 2450 MHz; σ = 1.862 S/m; εr = 37.942; ρ = 1000 kg/m3 Ambient Temperature：23.5 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3898; ConvF(7.59, 7.59, 7.59); Calibrated: 2018/06/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: Twin SAM Phantom_1653; Type: QD000P40; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=250mW/Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 21.0 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 102.5 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 26.2 W/kg SAR(1 g) = 12.5 W/kg; SAR(10 g) = 5.79 W/kg Maximum value of SAR (measured) = 21.2 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/07/31 System Check_H5250_180731 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1019 Communication System: CW; Frequency: 5250 MHz;Duty Cycle: 1:1 Medium: H34T60N1_0731 Medium parameters used: f = 5250 MHz; σ = 4.673 S/m; εr = 35.938; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3971; ConvF(5.24, 5.24, 5.24); Calibrated: 2018/03/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1431; Calibrated: 2018/03/16 - Phantom: Twin SAM Phantom_1653; Type: QD000P40; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 18.3 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 71.14 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 34.3 W/kg SAR(1 g) = 7.94 W/kg; SAR(10 g) = 2.28 W/kg Maximum value of SAR (measured) = 20.3 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/07/31 System Check_H5600_180731 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1019 Communication System: CW; Frequency: 5600 MHz;Duty Cycle: 1:1 Medium: H34T60N1_0731 Medium parameters used: f = 5600 MHz; σ = 5.08 S/m; εr = 35.374; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3971; ConvF(4.84, 4.84, 4.84); Calibrated: 2018/03/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1431; Calibrated: 2018/03/16 - Phantom: Twin SAM Phantom_1653; Type: QD000P40; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 21.6 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 74.00 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 41.0 W/kg SAR(1 g) = 8.83 W/kg; SAR(10 g) = 2.52 W/kg Maximum value of SAR (measured) = 23.0 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/07/25 System Check_H5800_180725 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1019 Communication System: CW; Frequency: 5800 MHz;Duty Cycle: 1:1 Medium: H34T60N1_0725 Medium parameters used: f = 5800 MHz; σ = 5.262 S/m; εr = 36.862; ρ = 1000 kg/m3 Ambient Temperature：23.7 ℃ ; Liquid Temperature：23.3 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3898; ConvF(5.09, 5.09, 5.09); Calibrated: 2018/06/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: Twin SAM Phantom_1653; Type: QD000P40; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 17.6 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 65.75 V/m; Power Drift = 0.19 dB Peak SAR (extrapolated) = 34.8 W/kg SAR(1 g) = 7.7 W/kg; SAR(10 g) = 2.19 W/kg Maximum value of SAR (measured) = 20.2 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/08/19 System Check_B750_180819 DUT: Dipole 750 MHz; Type: D750V3; SN: 1013 Communication System: CW; Frequency: 750 MHz;Duty Cycle: 1:1 Medium: B06T09N1_0819 Medium parameters used: f = 750 MHz; σ = 0.961 S/m; εr = 54.281; ρ = 1000 kg/m3 Ambient Temperature：23.9 ℃ ; Liquid Temperature：23.5 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(9.91, 9.91, 9.91); Calibrated: 2018/07/27 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1232; Calibrated: 2018/05/22 - Phantom: Twin SAM Phantom_1496; Type: QD000P40CA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=250mW/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.81 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 56.29 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 3.13 W/kg SAR(1 g) = 2.1 W/kg; SAR(10 g) = 1.39 W/kg Maximum value of SAR (measured) = 2.79 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/08/19 System Check_B835_180819 DUT: Dipole 835 MHz; Type: D835V2; SN: 4d121 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: B07T10N1_0819 Medium parameters used: f = 835 MHz; σ = 0.972 S/m; εr = 57.709; ρ = 1000 kg/m3 Ambient Temperature：23.9 ℃ ; Liquid Temperature：23.5 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(9.74, 9.74, 9.74); Calibrated: 2018/07/27 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1232; Calibrated: 2018/05/22 - Phantom: Twin SAM Phantom_1496; Type: QD000P40CA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 3.00 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 57.96 V/m; Power Drift = -0.06 dB Peak SAR (extrapolated) = 3.35 W/kg SAR(1 g) = 2.25 W/kg; SAR(10 g) = 1.48 W/kg Maximum value of SAR (measured) = 2.98 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/07/22 System Check_B1750_180722 DUT: Dipole 1750 MHz; Type: D1750V2; SN: 1055 Communication System: CW; Frequency: 1750 MHz;Duty Cycle: 1:1 Medium: B16T20N1_0722 Medium parameters used: f = 1750 MHz; σ = 1.442 S/m; εr = 51.72; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.1 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3971; ConvF(8.34, 8.34, 8.34); Calibrated: 2018/03/26; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1431; Calibrated: 2018/03/16 - Phantom: Twin SAM Phantom_1496; Type: QD000P40CA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 14.0 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 95.33 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 17.1 W/kg SAR(1 g) = 8.97 W/kg; SAR(10 g) = 4.7 W/kg Maximum value of SAR (measured) = 14.2 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/08/19 System Check_B1900_180819 DUT: Dipole 1900 MHz; Type: D1900V2; SN: 5d036 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: B16T20N1_0819 Medium parameters used: f = 1900 MHz; σ = 1.584 S/m; εr = 52.168; ρ = 1000 kg/m3 Ambient Temperature：23.9 ℃ ; Liquid Temperature：23.5 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(7.89, 7.89, 7.89); Calibrated: 2018/07/27 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1232; Calibrated: 2018/05/22 - Phantom: Twin SAM Phantom_1496; Type: QD000P40CA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 15.1 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 99.03 V/m; Power Drift = -0.09 dB Peak SAR (extrapolated) = 18.7 W/kg SAR(1 g) = 10.5 W/kg; SAR(10 g) = 5.54 W/kg Maximum value of SAR (measured) = 14.9 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/07/31 System Check_B2450_180731 DUT: Dipole 2450 MHz; Type: D2450V2; SN: 869 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: B19T27N1_0731 Medium parameters used: f = 2450 MHz; σ = 1.987 S/m; εr = 51.412; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.3 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3971; ConvF(7.7, 7.7, 7.7); Calibrated: 2018/03/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1431; Calibrated: 2018/03/16 - Phantom: Twin SAM Phantom_1652; Type: QD000P40; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=250mW/Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 20.7 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 105.5 V/m; Power Drift = -0.17 dB Peak SAR (extrapolated) = 25.9 W/kg SAR(1 g) = 12.3 W/kg; SAR(10 g) = 5.6 W/kg Maximum value of SAR (measured) = 20.9 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/07/25 System Check_B5250_180725 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1019 Communication System: CW; Frequency: 5250 MHz;Duty Cycle: 1:1 Medium: B34T60N1_0725 Medium parameters used: f = 5250 MHz; σ = 5.555 S/m; εr = 47.077; ρ = 1000 kg/m3 Ambient Temperature：23.5 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3898; ConvF(4.95, 4.95, 4.95); Calibrated: 2018/06/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: Twin SAM Phantom_1652; Type: QD000P40; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 18.5 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 66.63 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 35.8 W/kg SAR(1 g) = 7.93 W/kg; SAR(10 g) = 2.23 W/kg Maximum value of SAR (measured) = 20.6 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/07/25 System Check_B5600_180725 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1019 Communication System: CW; Frequency: 5600 MHz;Duty Cycle: 1:1 Medium: B34T60N1_0725 Medium parameters used: f = 5600 MHz; σ = 6.014 S/m; εr = 46.456; ρ = 1000 kg/m3 Ambient Temperature：23.5 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3898; ConvF(4.17, 4.17, 4.17); Calibrated: 2018/06/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: Twin SAM Phantom_1652; Type: QD000P40; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 20.5 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 69.56 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 37.4 W/kg SAR(1 g) = 8.43 W/kg; SAR(10 g) = 2.36 W/kg Maximum value of SAR (measured) = 22.1 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/07/25 System Check_B5800_180725 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1019 Communication System: CW; Frequency: 5800 MHz;Duty Cycle: 1:1 Medium: B34T60N1_0725 Medium parameters used: f = 5800 MHz; σ = 6.294 S/m; εr = 46.095; ρ = 1000 kg/m3 Ambient Temperature：23.5 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3898; ConvF(4.45, 4.45, 4.45); Calibrated: 2018/06/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: Twin SAM Phantom_1652; Type: QD000P40; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 18.8 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 55.87 V/m; Power Drift = -0.15 dB Peak SAR (extrapolated) = 35.1 W/kg SAR(1 g) = 7.64 W/kg; SAR(10 g) = 2.18 W/kg Maximum value of SAR (measured) = 20.3 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/08/10 System Check_B5250_180810 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1019 Communication System: CW; Frequency: 5250 MHz;Duty Cycle: 1:1 Medium: B34T60N3_0810 Medium parameters used: f = 5250 MHz; σ = 5.351 S/m; εr = 49.105; ρ = 1000 kg/m3 Ambient Temperature：23.8 ℃ ; Liquid Temperature：23.4 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN7346; ConvF(5.06, 5.06, 5.06); Calibrated: 2018/02/28 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn679; Calibrated: 2018/03/05 - Phantom: Twin SAM Phantom_1823; Type: QD000P40CD; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 19.8 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 69.80 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 32.5 W/kg SAR(1 g) = 7.81 W/kg; SAR(10 g) = 2.19 W/kg Maximum value of SAR (measured) = 19.8 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/07/31 System Check_B5600_180731 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1019 Communication System: CW; Frequency: 5600 MHz;Duty Cycle: 1:1 Medium: B34T60N1_0731 Medium parameters used: f = 5600 MHz; σ = 5.853 S/m; εr = 50.213; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.3 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3971; ConvF(4.08, 4.08, 4.08); Calibrated: 2018/03/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1431; Calibrated: 2018/03/16 - Phantom: Twin SAM Phantom_1652; Type: QD000P40; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 20.1 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 69.74 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 37.3 W/kg SAR(1 g) = 8.35 W/kg; SAR(10 g) = 2.34 W/kg Maximum value of SAR (measured) = 21.9 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/08/10 System Check_B5800_180810 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1019 Communication System: CW; Frequency: 5800 MHz;Duty Cycle: 1:1 Medium: B34T60N3_0810 Medium parameters used: f = 5800 MHz; σ = 6.074 S/m; εr = 48.636; ρ = 1000 kg/m3 Ambient Temperature：23.8 ℃ ; Liquid Temperature：23.4 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN7346; ConvF(4.52, 4.52, 4.52); Calibrated: 2018/02/28 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn679; Calibrated: 2018/03/05 - Phantom: Twin SAM Phantom_1823; Type: QD000P40CD; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 19.6 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 65.02 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 35.7 W/kg SAR(1 g) = 7.3 W/kg; SAR(10 g) = 2.02 W/kg Maximum value of SAR (measured) = 19.6 W/kg


Document Created: 2018-12-18 19:00:52
Document Modified: 2018-12-18 19:00:52
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC