Test Report (NII)_spot check rev.pdf

FCC ID: PZWBHT1700QG

Test Report

Download: PDF
FCCID_4176583

FCC Test Report (Spot Check) Report No.: RF180102C33C-37 FCC ID: PZWBHT1700QG Original FCC ID: PZWBHT1700BQL Model: BHT-1700QWBG-2 Series Model: BHT-1700QWBG-1 (Refer to item 3.1 for the more details) Received Date: Jan. 02, 2018 Test Date: Jan. 22 ~ Jul. 19, 2018 Issued Date: Jul. 31, 2018 Applicant: DENSO WAVE INCORPORATED Address: 1, Yoshiike, Kusagi, Agui-cho, Chita-gun, Aichi, 470-2297 Japan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) FCC Registration/ 788550 / TW0003 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF180102C33C-37 Page No. 1 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................. 10 3.2.1 Test Mode Applicability and Tested Channel Detail........................................................................... 12 3.3 Duty Cycle of Test Signal .................................................................................................................. 13 3.4 Description of Support Units ............................................................................................................. 14 3.4.1 Configuration of System under Test .................................................................................................. 14 3.5 General Description of Applied Standards ........................................................................................ 14 4 Test Types and Results ...................................................................................................................... 15 4.1 Transmit Power Measurement .......................................................................................................... 15 4.1.1 Limits of Transmit Power Measurement ............................................................................................ 15 4.1.2 Test Setup .......................................................................................................................................... 15 4.1.3 Test Instruments ................................................................................................................................ 16 4.1.4 Test Procedure .................................................................................................................................. 16 4.1.5 Deviation from Test Standard ............................................................................................................ 16 4.1.6 EUT Operating Conditions................................................................................................................. 16 4.1.7 Test Result ......................................................................................................................................... 17 4.2 Occupied Bandwidth Measurement .................................................................................................. 22 4.2.1 Test Setup .......................................................................................................................................... 22 4.2.2 Test Instruments ................................................................................................................................ 22 4.2.3 Test Procedure .................................................................................................................................. 22 4.2.4 Test Result ......................................................................................................................................... 23 4.3 Peak Power Spectral Density Measurement .................................................................................... 24 4.3.1 Limits of Peak Power Spectral Density Measurement ...................................................................... 24 4.3.2 Test Setup .......................................................................................................................................... 24 4.3.3 Test Instruments ................................................................................................................................ 24 4.3.4 Test Procedures................................................................................................................................. 25 4.3.5 Deviation from Test Standard ............................................................................................................ 25 4.3.6 EUT Operating Conditions................................................................................................................. 25 4.3.7 Test Results ....................................................................................................................................... 26 4.4 Frequency Stability ............................................................................................................................ 27 4.4.1 Limits of Frequency Stability Measurement ...................................................................................... 27 4.4.2 Test Setup .......................................................................................................................................... 27 4.4.3 Test Instruments ................................................................................................................................ 27 4.4.4 Test Procedure .................................................................................................................................. 27 4.4.5 Deviation from Test Standard ............................................................................................................ 27 4.4.6 EUT Operating Condition .................................................................................................................. 27 4.4.7 Test Results ....................................................................................................................................... 28 4.5 6dB Bandwidth Measurement ........................................................................................................... 30 4.5.1 Limits of 6dB Bandwidth Measurement ............................................................................................. 30 4.5.2 Test Setup .......................................................................................................................................... 30 4.5.3 Test Instruments ................................................................................................................................ 30 4.5.4 Test Procedure .................................................................................................................................. 30 4.5.5 Deviation from Test Standard ............................................................................................................ 30 4.5.6 EUT Operating Condition .................................................................................................................. 30 4.5.7 Test Results ....................................................................................................................................... 31 5 Pictures of Test Arrangements .......................................................................................................... 32 Report No.: RF180102C33C-37 Page No. 2 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

Appendix – Information of the Testing Laboratories ................................................................................. 33 Report No.: RF180102C33C-37 Page No. 3 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

Release Control Record Issue No. Description Date Issued RF180102C33C-37 Original release. Jul. 31, 2018 Report No.: RF180102C33C-37 Page No. 4 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

1 Certificate of Conformity Product: Barcode Handy Terminal, 2D Code Handy Terminal Brand: DENSO Model: BHT-1700QWBG-2 Series Model: BHT-1700QWBG-1 (Refer to item 3.1 for the more details) Sample Status: Engineering sample Applicant: DENSO WAVE INCORPORATED Test Date: Jan. 22 ~ Jul. 19, 2018 Standards: 47 CFR FCC Part 15, Subpart E (Section 15.407) ANSI C63.10:2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Jul. 31, 2018 Pettie Chen / Senior Specialist Approved by : , Date: Jul. 31, 2018 Bruce Chen / Project Engineer Report No.: RF180102C33C-37 Page No. 5 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

2 Summary of Test Results 47 CFR FCC Part 15, Subpart E (Section 15.407) FCC Test Item Result Remarks Clause 15.407(a)(1/2/3) Max Average Transmit Power Pass Meet the requirement of limit. Occupied Bandwidth --- Pass Meet the requirement of limit. Measurement Meet the requirement of limit. 15.407(a)(1/2/3) Peak Power Spectral Density Pass (U-NII-3 Band only) 15.407(e) 6dB bandwidth Pass Meet the requirement of limit. 15.407(g) Frequency Stability Pass Meet the requirement of limit. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Expanded Uncertainty Measurement Frequency (k=2) (±) Conducted Emissions at mains ports 150kHz ~ 30MHz 2.94 dB 30MHz ~ 200MHz 3.63 dB 200MHz ~ 1000MHz 3.64 dB Radiated Emissions 1GHz ~ 18GHz 2.29 dB 18GHz ~ 40GHz 2.29 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF180102C33C-37 Page No. 6 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

3 General Information 3.1 General Description of EUT Product Barcode Handy Terminal, 2D Code Handy Terminal Brand DENSO Model BHT-1700QWBG-2 Series Model BHT-1700QWBG-1 Model Difference Refer to Note Sample Status Engineering sample 3.7Vdc (battery) Power Supply Rating 12Vdc (Cradle) Modulation Type 16QAM, QPSK, BPSK Modulation Technology OFDM 802.11a: 54/48/36/24/18/12/9/6Mbps Transfer Rate 802.11n: up to 150Mbps Operating Frequency 5180~5240MHz, 5260~5320MHz, 5500~5700MHz, 5745~5825MHz 5180~5240MHz: 802.11a, 802.11n (HT20): 4 802.11n (HT40): 2 5260~5320MHz: 802.11a, 802.11n (HT20): 4 802.11n (HT40): 2 Number of Channel 5500~5700MHz: 802.11a, 802.11n (HT20): 11 802.11n (HT40): 5 5745~5825MHz: 802.11a, 802.11n (HT20): 5 802.11n (HT40): 2 5180~5240MHz: 41.210mW 5260~5320MHz: 40.179mW Output Power 5500~5700MHz: 42.855mW 5745~5825MHz: 45.604mW Antenna Type Refer to note Antenna Connector Refer to note Accessory Device NA Cable Supplied NA Report No.: RF180102C33C-37 Page No. 7 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

Note: 1. Exhibit prepared for FCC Spot Check Verification report, the format, test items and amount of spot-check test data are decided by applicant's engineering judgment, for more details pleae refer to declaration letter exhibit. 2. All models are listed as below. Software LCD WLAN / WWAN / NFC LTE Model Name base module CPU Docomo OS 4" WLAN GPS LTE Antenna NFC IoT type BHT-1700QWBG-2 4inch WLAN/BT+LTE(USA) MSM8909 Android ○ ○ ○ ○ USA ○ ○ BHT-1700QWBG-1 4inch WLAN/BT+LTE(USA) MSM8909 Android ○ ○ ○ ○ USA ○ Audio Sensor Reading keyboard Model Name Main Sub Camera speaker Receiver IR Reader 2D 10Key MIC MIC (rear) BHT-1700QWBG-2 ○ ○ ○ ○ ○ ○ ○ ○ BHT-1700QWBG-1 ○ ○ ○ ○ ○ ○ ○ *Model: BHT-1700QWBG-2 was chosen for the final tests. *NFC Limited module (Brand: DENSO, Model: DWI002, FCC ID: PZWDWI002) collocated in EUT (model: BHT-1700QWBG-2). 3. The EUT provides 1 completed transmitter and 1 receiver. Modulation Mode TX Function 802.11a 1TX 802.11n (HT20) 1TX 802.11n (HT40) 1TX 4. The EUT with follow antennas gain is listed as table below. Cable Cable Length Antenna Gain(dBi) Frequency range Connecter Loss(dB) Brand Antenna Type (External Including cable loss (MHz to MHz) Type (External only) only) Metal 2.27 2.4~2.4835GHz PIFA 1 30cm shrapnel Metal 3.59 5.15~5.25GHz PIFA 1.7 30cm shrapnel Metal WHAYU 3.51 5.25~5.35GHz PIFA 1.7 30cm shrapnel Metal 4.13 5.47~5.725GHz PIFA 1.7 30cm shrapnel Metal 2.91 5.725~5.850GHz PIFA 1.7 30cm shrapnel 5. The EUT consumes power from the following battery. Battery 1 (For BHT-1700 Used) Brand DENSO Model BT-110LA Rating 2300mAh, 3.7Vdc,8.5Wh Battery 2 (For BHT-1700 Used) Brand DENSO Model BT-110L Rating 3450mAh, 3.7Vdc,12.8Wh *After pre-testing, battery 1 was the worst case for the final tests. Report No.: RF180102C33C-37 Page No. 8 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

6. The client provides the following cradles for tests. (Support unit only) LAN Cradle (For BHT-1700 Used) (Support unit) Brand DENSO Model CU-BL-17 Output Power 12Vdc, 4.16A, 50W USB Cradle (For BHT-1700 Used) (Support unit) Brand DENSO Model CU-BU1-17 Output Power 12Vdc, 4.16A, 50W Adapter for cradle (Support unit) Brand FSP GROUP INC. Model FSP050-DBAE1 Input Power 100-240Vac, 1.5A, 50/60Hz Output Power 12Vdc, 4.16A, 50W Power Line 1.2m non-shielded DC cable with 1 core attached on adapter *After pre-testing, USB cradle was the worst case for the final tests. 7. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: RF180102C33C-37 Page No. 9 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

3.2 Description of Test Modes 5180~5240MHz: 4 channels are provided for 802.11a, 802.11n (HT20): Channel Frequency Channel Frequency 36 5180 MHz 44 5220 MHz 40 5200 MHz 48 5240 MHz 2 channels are provided for 802.11n (HT40): Channel Frequency Channel Frequency 38 5190 MHz 46 5230 MHz 5260~5320MHz: 4 channels are provided for 802.11a, 802.11n (HT20): Channel Frequency Channel Frequency 52 5260 MHz 60 5300 MHz 56 5280 MHz 64 5320 MHz 2 channels are provided for 802.11n (HT40): Channel Frequency Channel Frequency 54 5270 MHz 62 5310 MHz 5500~5700MHz: 11 channels are provided for 802.11a, 802.11n (HT20): Channel Frequency Channel Frequency 100 5500 MHz 124 5620 MHz 104 5520 MHz 128 5640 MHz 108 5540 MHz 132 5660 MHz 112 5560 MHz 136 5680 MHz 116 5580 MHz 140 5700 MHz 120 5600 MHz 5 channels are provided for 802.11n (HT40): Channel Frequency Channel Frequency 102 5510 MHz 126 5630 MHz 110 5550 MHz 134 5670 MHz 118 5590 MHz Report No.: RF180102C33C-37 Page No. 10 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

5745~5825MHz: 5 channels are provided for 802.11a, 802.11n (HT20): Channel Frequency Channel Frequency 149 5745 MHz 161 5805 MHz 153 5765 MHz 165 5825 MHz 157 5785 MHz 2 channels are provided for 802.11n (HT40): Channel Frequency Channel Frequency 151 5755 MHz 159 5795 MHz Report No.: RF180102C33C-37 Page No. 11 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

3.2.1 Test Mode Applicability and Tested Channel Detail EUT Configure Applicable to Description Mode RE1G RE<1G PLC APCM A - - - √ Power from battery B - - - - Power from Cradle Where RE1G: Radiated Emission above 1GHz & Bandedge RE<1G: Radiated Emission below 1GHz Measurement PLC: Power Line Conducted Emission APCM: Antenna Port Conducted Measurement Note: “-” means no effect. Antenna Port Conducted Measurement: This item includes all test value of each mode, but only includes spectrum plot of worst value of each mode. Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Frequency Band Available Modulation Data Rate Mode Tested Channel Mode (MHz) Channel Technology (Mbps) 802.11a 36 to 48 36, 40, 48 OFDM 6.0 A 802.11n (HT20) 5180-5240 36 to 48 36, 40, 48 OFDM 6.5 802.11n (HT40) 38 to 46 38, 46 OFDM 13.5 802.11a 52 to 64 52, 60, 64 OFDM 6.0 A 802.11n (HT20) 5260-5320 52 to 64 52, 60, 64 OFDM 6.5 802.11n (HT40) 54 to 62 54, 62 OFDM 13.5 802.11a 100 to 140 100, 116, 140 OFDM 6.0 A 802.11n (HT20) 5500-5700 100 to 140 100, 116, 140 OFDM 6.5 802.11n (HT40) 102 to 134 102, 110, 134 OFDM 13.5 802.11a 149 to 165 149, 157, 165 OFDM 6.0 A 802.11n (HT20) 5745-5825 149 to 165 149, 157, 165 OFDM 6.5 802.11n (HT40) 151 to 159 151, 159 OFDM 13.5 Test Condition: Applicable to Environmental Conditions Input Power Tested by APCM 25deg. C, 60%RH 120Vac, 60Hz Chris Lin Report No.: RF180102C33C-37 Page No. 12 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

3.3 Duty Cycle of Test Signal Duty cycle of test signal is ≥ 98%, duty factor is not required. Duty cycle of test signal is < 98%, duty factor shall be considered. 802.11a: Duty cycle = 1.348/1.584 = 0.851, Duty factor = 10 * log(1/0.851) = 0.70 802.11n (HT20): Duty cycle = 1.276/1.476= 0.864, Duty factor = 10 * log(1/0.864) = 0.63 802.11n (HT40): Duty cycle = 0.628/0.828 = 0.758, Duty factor = 10 * log(1/0.758) = 1.20 802.11a 802.11n (HT20) 802.11n (HT40) Report No.: RF180102C33C-37 Page No. 13 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

3.4 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. FCC ID Remarks A. Notebook Lenovo 81A4 YD02TWF5 PPD-QCNFA435 - B. Cradle DENSO CU-BU1-17 NA NA Provided by manufacturer C. Adapter FSP GROUP INC. FSP050-DBAE1 NA NA Provided by manufacturer Note: All power cords of the above support units are non-shielded (1.8m). Shielding ID Descriptions Qty. Length (m) Cores (Qty.) Remarks (Yes/No) 1. USB cable 1 0.5 Y 0 - 2. DC cable 1 1.2 N 1 Provided by manufacturer 3.4.1 Configuration of System under Test Test Mode A EUT Test Mode B Cradle (B) Battery EUT (2) Adapter (C) (1) Notebook (A) 3.5 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart E (15.407) KDB 789033 D02 General UNII Test Procedure New Rules v02r01 ANSI C63.10:2013 All test items have been performed and recorded as per the above standards. Report No.: RF180102C33C-37 Page No. 14 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4 Test Types and Results 4.1 Transmit Power Measurement 4.1.1 Limits of Transmit Power Measurement Operation EUT Category LIMIT Band 1 Watt (30 dBm) (Max. e.i.r.p ≦ 125mW(21 dBm) at any elevation Outdoor Access Point angle above 30 degrees as measured from the horizon) U-NII-1 Fixed point-to-point Access Point 1 Watt (30 dBm) Indoor Access Point 1 Watt (30 dBm)  Mobile and Portable client device 250mW (24 dBm) U-NII-2A  250mW (24 dBm) or 11 dBm+10 log B* U-NII-2C  250mW (24 dBm) or 11 dBm+10 log B* U-NII-3  1 Watt (30 dBm) *B is the 26 dB emission bandwidth in megahertz 4.1.2 Test Setup For Power Output 802.11a, 802.11n (HT20), 802.11n (HT40) EUT Attenuator Power Sensor Power Meter For 26dB and Occupied Bandwidth Spectrum EUT Attenuator Analyzer Report No.: RF180102C33C-37 Page No. 15 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.1.3 Test Instruments Description & Model No. Serial No. Cal. Date Cal. Due Manufacturer Spectrum Analyzer FSP40 100040 Aug. 18, 2017 Aug. 17, 2018 ROHDE & SCHWARZ High Speed Peak Power ML2495A 0824012 Aug. 18, 2017 Aug. 17, 2018 Meter Power Sensor MA2411B 0738171 Aug. 18, 2017 Aug. 17, 2018 4.1.4 Test Procedure For Average Power Measurement For 802.11a, 802.11n (HT20), 802.11n (HT40) Method PM is used to perform output power measurement, trigger and gating function of wide band power meter is enabled to measure max output power of TX on burst. Duty factor is not added to measured value. For 26dB Bandwidth a. Set RBW = approximately 1% of the emission bandwidth. b. Set the VBW > RBW. c. Detector = Peak. d. Trace mode = max hold. e. Measure the maximum width of the emission that is 26 dB down from the peak of the emission. Compare this with the RBW setting of the analyzer. Readjust RBW and repeat measurement as needed until the RBW/EBW ratio is approximately 1%. For Occupied Bandwidth The transmitter output was connected to the spectrum analyzer through an attenuator. The bandwidth of the fundamental frequency was measured by spectrum analyzer with resolution bandwidth in the range of 1% to 5% of the anticipated emission bandwidth, and a video bandwidth at least 3x the resolution bandwidth and set the detector to Sampling. The width of a frequency band such that, below the lower and above the upper frequency limits, the mean powers emitted are each equal to a specified percentage 0.5 %of the total mean power of a given emission. 4.1.5 Deviation from Test Standard No deviation. 4.1.6 EUT Operating Conditions The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF180102C33C-37 Page No. 16 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.1.7 Test Result FCC ID: PZWBHT1700BQL (initial) Power Output: 802.11a Conducted Power Conducted Power Power Limit Chan. Freq. (MHz) Pass / Fail (mW) (dBm) (dBm) 36 5180 41.210 16.15 24.00 Pass 40 5200 40.551 16.08 24.00 Pass 48 5240 39.537 15.97 24.00 Pass 52 5260 40.179 16.04 24.00 Pass 60 5300 39.902 16.01 24.00 Pass 64 5320 40.087 16.03 24.00 Pass 100 5500 42.170 16.25 24.00 Pass 116 5580 42.855 16.32 24.00 Pass 140 5700 33.651 15.27 24.00 Pass 149 5745 45.604 16.59 30.00 Pass 157 5785 43.752 16.41 30.00 Pass 165 5825 42.170 16.25 30.00 Pass Note: For U-NII-2A, U-NII-2C Band: 1. 11dBm + 10log( 40.37 ) = 27.06 dBm > 24dBm 2. 11dBm + 10log( 41.33 ) = 27.16 dBm > 24dBm 3. 11dBm + 10log( 43.10 ) = 27.34 dBm > 24dBm 4. 11dBm + 10log( 41.02 ) = 27.13 dBm > 24dBm 5. 11dBm + 10log( 42.77 ) = 27.31 dBm > 24dBm 6. 11dBm + 10log( 41.85 ) = 27.22 dBm > 24dBm Report No.: RF180102C33C-37 Page No. 17 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

802.11n (HT20) Conducted Power Conducted Power Power Limit Chan. Freq. (MHz) Pass / Fail (mW) (dBm) (dBm) 36 5180 30.339 14.82 24.00 Pass 40 5200 30.974 14.91 24.00 Pass 48 5240 30.903 14.90 24.00 Pass 52 5260 32.434 15.11 24.00 Pass 60 5300 31.477 14.98 24.00 Pass 64 5320 30.974 14.91 24.00 Pass 100 5500 34.119 15.33 24.00 Pass 116 5580 34.435 15.37 24.00 Pass 140 5700 23.550 13.72 24.00 Pass 149 5745 34.356 15.36 30.00 Pass 157 5785 34.514 15.38 30.00 Pass 165 5825 31.842 15.03 30.00 Pass Note: For U-NII-2A, U-NII-2C Band: 1. 11dBm + 10log( 40.49 ) = 27.07 dBm > 24dBm 2. 11dBm + 10log( 40.87 ) = 27.11 dBm > 24dBm 3. 11dBm + 10log( 39.91 ) = 27.01 dBm > 24dBm 4. 11dBm + 10log( 42.95 ) = 27.33 dBm > 24dBm 5. 11dBm + 10log( 43.97 ) = 27.43 dBm > 24dBm 6. 11dBm + 10log( 45.90 ) = 27.62 dBm > 24dBm 802.11n (HT40) Conducted Power Conducted Power Power Limit Chan. Freq. (MHz) Pass / Fail (mW) (dBm) (dBm) 38 5190 25.942 14.14 24.00 Pass 46 5230 26.303 14.20 24.00 Pass 54 5270 26.242 14.19 24.00 Pass 62 5310 18.621 12.70 24.00 Pass 102 5510 15.596 11.93 24.00 Pass 110 5550 28.184 14.50 24.00 Pass 134 5670 28.249 14.51 24.00 Pass 151 5755 30.061 14.78 30.00 Pass 159 5795 28.840 14.60 30.00 Pass Note: For U-NII-2A, U-NII-2C Band: 1. 11dBm + 10log( 74.64 ) = 29.73 dBm > 24dBm 2. 11dBm + 10log( 63.52 ) = 29.03 dBm > 24dBm 3. 11dBm + 10log( 62.88 ) = 28.99 dBm > 24dBm 4. 11dBm + 10log( 89.00 ) = 30.49 dBm > 24dBm 5. 11dBm + 10log( 83.58 ) = 30.22 dBm > 24dBm Report No.: RF180102C33C-37 Page No. 18 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

PZWBHT1700QG (new) Power Output: 802.11a Conducted Power Conducted Power Power Limit Chan. Freq. (MHz) Pass / Fail (mW) (dBm) (dBm) 36 5180 39.902 16.01 24.00 Pass 40 5200 39.628 15.98 24.00 Pass 48 5240 38.637 15.87 24.00 Pass 52 5260 38.548 15.86 24.00 Pass 60 5300 38.548 15.86 24.00 Pass 64 5320 38.994 15.91 24.00 Pass 100 5500 40.832 16.11 24.00 Pass 116 5580 41.591 16.19 24.00 Pass 140 5700 31.989 15.05 24.00 Pass 149 5745 44.875 16.52 30.00 Pass 157 5785 42.658 16.30 30.00 Pass 165 5825 41.4 16.17 30.00 Pass Note: For U-NII-2A, U-NII-2C Band: 1. 11dBm + 10log( 40.37 ) = 27.06 dBm > 24dBm 2. 11dBm + 10log( 41.33 ) = 27.16 dBm > 24dBm 3. 11dBm + 10log( 43.10 ) = 27.34 dBm > 24dBm 4. 11dBm + 10log( 41.02 ) = 27.13 dBm > 24dBm 5. 11dBm + 10log( 42.77 ) = 27.31 dBm > 24dBm 6. 11dBm + 10log( 41.85 ) = 27.22 dBm > 24dBm Report No.: RF180102C33C-37 Page No. 19 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

802.11n (HT20) Conducted Power Conducted Power Power Limit Chan. Freq. (MHz) Pass / Fail (mW) (dBm) (dBm) 36 5180 29.785 14.74 24.00 Pass 40 5200 29.923 14.76 24.00 Pass 48 5240 29.854 14.75 24.00 Pass 52 5260 31.477 14.98 24.00 Pass 60 5300 29.992 14.77 24.00 Pass 64 5320 29.923 14.76 24.00 Pass 100 5500 33.189 15.21 24.00 Pass 116 5580 33.651 15.27 24.00 Pass 140 5700 22.387 13.50 24.00 Pass 149 5745 33.266 15.22 30.00 Pass 157 5785 33.42 15.24 30.00 Pass 165 5825 31.117 14.93 30.00 Pass Note: For U-NII-2A, U-NII-2C Band: 1. 11dBm + 10log( 40.49 ) = 27.07 dBm > 24dBm 2. 11dBm + 10log( 40.87 ) = 27.11 dBm > 24dBm 3. 11dBm + 10log( 39.91 ) = 27.01 dBm > 24dBm 4. 11dBm + 10log( 42.95 ) = 27.33 dBm > 24dBm 5. 11dBm + 10log( 43.97 ) = 27.43 dBm > 24dBm 6. 11dBm + 10log( 45.90 ) = 27.62 dBm > 24dBm 802.11n (HT40) Conducted Power Conducted Power Power Limit Chan. Freq. (MHz) Pass / Fail (mW) (dBm) (dBm) 38 5190 24.491 13.89 24.00 Pass 46 5230 25.41 14.05 24.00 Pass 54 5270 25.527 14.07 24.00 Pass 62 5310 17.906 12.53 24.00 Pass 102 5510 14.825 11.71 24.00 Pass 110 5550 27.102 14.33 24.00 Pass 134 5670 27.669 14.42 24.00 Pass 151 5755 29.309 14.67 30.00 Pass 159 5795 28.054 14.48 30.00 Pass Note: For U-NII-2A, U-NII-2C Band: 1. 11dBm + 10log( 74.64 ) = 29.73 dBm > 24dBm 2. 11dBm + 10log( 63.52 ) = 29.03 dBm > 24dBm 3. 11dBm + 10log( 62.88 ) = 28.99 dBm > 24dBm 4. 11dBm + 10log( 89.00 ) = 30.49 dBm > 24dBm 5. 11dBm + 10log( 83.58 ) = 30.22 dBm > 24dBm Report No.: RF180102C33C-37 Page No. 20 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

FCC ID: PZWBHT1700BQL (initial) 26dB Bandwidth: 802.11a Channel Frequency (MHz) 26dBc Bandwidth (MHz) 116 5580 42.77 Spectrum Plot of Worst Value 802.11a PZWBHT1700QG (new) 26dB Bandwidth: 802.11a Channel Frequency (MHz) 26dBc Bandwidth (MHz) 116 5580 40.59 Spectrum Plot of Worst Value 802.11a Report No.: RF180102C33C-37 Page No. 21 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.2 Occupied Bandwidth Measurement 4.2.1 Test Setup Spectrum EUT Attenuator Analyzer 4.2.2 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.2.3 Test Procedure The transmitter output was connected to the spectrum analyzer through an attenuator. The bandwidth of the fundamental frequency was measured by spectrum analyzer with resolution bandwidth in the range of 1% to 5% of the anticipated emission bandwidth, and a video bandwidth at least 3x the resolution bandwidth and set the detector to sampling. The width of a frequency band such that, below the lower and above the upper frequency limits, the mean powers emitted are each equal to a specified percentage 0.5 %of the total mean power of a given emission. Report No.: RF180102C33C-37 Page No. 22 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.2.4 Test Result FCC ID: PZWBHT1700BQL (initial) 802.11a Channel Frequency (MHz) Occupied Bandwidth (MHz) 149 5745 26.88 Spectrum Plot of Worst Value 802.11a PZWBHT1700QG (new) 802.11a Channel Frequency (MHz) Occupied Bandwidth (MHz) 149 5745 21.60 Spectrum Plot of Worst Value 802.11a Report No.: RF180102C33C-37 Page No. 23 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.3 Peak Power Spectral Density Measurement 4.3.1 Limits of Peak Power Spectral Density Measurement Operation Band EUT Category LIMIT Outdoor Access Point Fixed point-to-point Access Point 17dBm/ MHz U-NII-1 Indoor Access Point  Mobile and Portable client device 11dBm/ MHz U-NII-2A  11dBm/ MHz U-NII-2C  11dBm/ MHz U-NII-3  30dBm/ 500kHz 4.3.2 Test Setup Spectrum EUT Attenuator Analyzer 4.3.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. Report No.: RF180102C33C-37 Page No. 24 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.3.4 Test Procedures For U-NII-1, U-NII-2A, U-NII-2C band: Duty cycle of test signal is ≥ 98% Using method SA-1 1) Set span to encompass the entire emission bandwidth (EBW) of the signal. 2) Set RBW = 1MHz, Set VBW ≥ 3 MHz, Detector = RMS 3) Set Channel power measure = 1MHz 4) Sweep time = auto, trigger set to “free run”. 5) Trace average at least 100 traces in power averaging mode. 6) Record the max value Duty cycle of test signal is < 98% Using method SA-2 1) Set span to encompass the entire emission bandwidth (EBW) of the signal. 2) Set RBW = 1MHz, Set VBW ≥ 3 MHz, Detector = RMS 3) Set Channel power measure = 1MHz 4) Sweep time = auto, trigger set to “free run”. 5) Trace average at least 100 traces in power averaging mode. 6) Record the max value and add 10 log (1/duty cycle) For U-NII-3 band: Duty cycle of test signal is ≥ 98% Using method SA-1 1) Set span to encompass the entire emission bandwidth (EBW) of the signal. 2) Set RBW = 300 kHz, Set VBW ≥ 1 MHz, Detector = RMS. 3) Use the peak marker function to determine the maximum power level in any 300 kHz band segment within the fundamental EBW. 4) Scale the observed power level to an equivalent value in 500 kHz by adjusting (reducing) the measured 1) power by a bandwidth correction factor (BWCF) where BWCF = 10log(500 kHz / 300 kHz). 5) Sweep time = auto, trigger set to “free run”. 6) Trace average at least 100 traces in power averaging mode. 7) Record the max value. Duty cycle of test signal is < 98% 1) Set span to encompass the entire emission bandwidth (EBW) of the signal. 2) Set RBW = 300 kHz, Set VBW ≥ 1 MHz, Detector = RMS 3) Use the peak marker function to determine the maximum power level in any 300 kHz band segment within the fundamental EBW. 4) Scale the observed power level to an equivalent value in 500 kHz by adjusting (reducing) the measured power by a bandwidth correction factor (BWCF) where BWCF = 10log(500 kHz / 300 kHz) 5) Sweep time = auto, trigger set to “free run”. 6) Trace average at least 100 traces in power averaging mode. 7) Record the max value and add 10 log (1/duty cycle) 4.3.5 Deviation from Test Standard No deviation. 4.3.6 EUT Operating Conditions Same as 4.3.6. Report No.: RF180102C33C-37 Page No. 25 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.3.7 Test Results FCC ID: PZWBHT1700BQL (initial) 802.11a Freq. PSD W/O Duty Factor Duty Total PSD Limit Pass / Chan. (MHz) (dBm/300kHz) (dBm/500kHz) factor (dBm/500kHz) (dBm/500kHz) Fail 149 5745 -6.68 -4.46 0.70 -3.76 30.00 Pass NOTE: Refer to section 3.1 for duty cycle spectrum plot. Spectrum Plot of Worst Value 802.11a PZWBHT1700QG (new) 802.11a Freq. PSD W/O Duty Factor Duty Total PSD Limit Pass / Chan. (MHz) (dBm/300kHz) (dBm/500kHz) factor (dBm/500kHz) (dBm/500kHz) Fail 149 5745 -6.74 -4.52 0.70 -3.82 30.00 Pass NOTE: Refer to section 3.1 for duty cycle spectrum plot. Spectrum Plot of Worst Value 802.11a Report No.: RF180102C33C-37 Page No. 26 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.4 Frequency Stability 4.4.1 Limits of Frequency Stability Measurement The frequency of the carrier signal shall be maintained within band of operation 4.4.2 Test Setup Temperature Chamber Spectrum Analyzer AC Power Supply 4.4.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.4.4 Test Procedure a. The EUT was placed inside the environmental test chamber and powered by nominal AC voltage. b. Turn the EUT on and couple its output to a spectrum analyzer. c. Turn the EUT off and set the chamber to the highest temperature specified. d. Allow sufficient time (approximately 30 min) for the temperature of the chamber to stabilize, turn the EUT on and measure the operating frequency after 2, 5, and 10 minutes. e. Repeat step 2 and 3 with the temperature chamber set to the lowest temperature. f. The test chamber was allowed to stabilize at +20 degree C for a minimum of 30 minutes. The supply voltage was then adjusted on the EUT from 85% to 115% and the frequency record. 4.4.5 Deviation from Test Standard No deviation. 4.4.6 EUT Operating Condition Set the EUT transmit at un-modulation mode to test frequency stability. Report No.: RF180102C33C-37 Page No. 27 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.4.7 Test Results FCC ID: PZWBHT1700BQL (initial) Frequency Stability Versus Temp. Operating Frequency: 5180MHz 0 Minute 2 Minute 5 Minute 10 Minute Temp. Power Supply Measured Measured Measured Measured (℃) (Vac) Frequency Result Frequency Result Frequency Result Frequency Result (MHz) (MHz) (MHz) (MHz) 50 120 5179.9880 Pass 5179.9880 Pass 5179.9850 Pass 5179.9860 Pass 40 120 5179.9918 Pass 5179.9906 Pass 5179.9922 Pass 5179.9880 Pass 30 120 5179.9876 Pass 5179.9898 Pass 5179.9900 Pass 5179.9902 Pass 20 120 5180.0115 Pass 5180.0139 Pass 5180.0132 Pass 5180.0136 Pass 10 120 5179.9819 Pass 5179.9821 Pass 5179.9811 Pass 5179.9831 Pass 0 120 5179.9769 Pass 5179.9788 Pass 5179.9782 Pass 5179.9795 Pass -10 120 5180.0095 Pass 5180.0081 Pass 5180.0059 Pass 5180.0068 Pass -20 120 5179.9958 Pass 5179.9959 Pass 5179.9952 Pass 5179.9955 Pass -30 120 5179.9802 Pass 5179.9810 Pass 5179.9836 Pass 5179.9804 Pass Frequency Stability Versus Voltage Operating Frequency: 5180MHz 0 Minute 2 Minute 5 Minute 10 Minute Temp. Power Supply Measured Measured Measured Measured (℃) (Vac) Frequency Result Frequency Result Frequency Result Frequency Result (MHz) (MHz) (MHz) (MHz) 138 5180.0111 Pass 5180.0136 Pass 5180.0132 Pass 5180.0144 Pass 20 120 5180.0115 Pass 5180.0139 Pass 5180.0132 Pass 5180.0136 Pass 102 5180.0113 Pass 5180.0137 Pass 5180.0132 Pass 5180.0131 Pass Report No.: RF180102C33C-37 Page No. 28 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

FCC ID: PZWBHT1700QG (new) Frequency Stability Versus Temp. Operating Frequency: 5180MHz 0 Minute 2 Minute 5 Minute 10 Minute Temp. Power Supply Measured Measured Measured Measured (℃) Frequency Result Frequency Result Frequency Result Frequency Result (Vac) (MHz) (MHz) (MHz) (MHz) 50 120 5180.0253 PASS 5180.0242 PASS 5180.027 PASS 5180.0237 PASS 40 120 5179.9896 PASS 5179.991 PASS 5179.9925 PASS 5179.9911 PASS 30 120 5180.0198 PASS 5180.0178 PASS 5180.018 PASS 5180.0208 PASS 20 120 5180.0138 PASS 5180.0128 PASS 5180.0095 PASS 5180.0096 PASS 10 120 5179.9878 PASS 5179.9875 PASS 5179.9909 PASS 5179.9874 PASS 0 120 5179.9748 PASS 5179.9748 PASS 5179.9775 PASS 5179.9766 PASS -10 120 5180.0178 PASS 5180.02 PASS 5180.02 PASS 5180.0169 PASS -20 120 5179.9752 PASS 5179.976 PASS 5179.9758 PASS 5179.9771 PASS -30 120 5179.9897 PASS 5179.987 PASS 5179.9869 PASS 5179.9894 PASS Frequency Stability Versus Voltage Operating Frequency: 5180MHz 0 Minute 2 Minute 5 Minute 10 Minute Power Temp. Supply Measured Measured Measured Measured (℃) Frequency Result Frequency Result Frequency Result Frequency Result (Vac) (MHz) (MHz) (MHz) (MHz) 138 5180.0132 PASS 5180.0135 PASS 5180.0088 PASS 5180.0089 PASS 20 120 5180.0138 PASS 5180.0128 PASS 5180.0095 PASS 5180.0096 PASS 102 5180.0133 PASS 5180.0129 PASS 5180.0088 PASS 5180.0088 PASS Report No.: RF180102C33C-37 Page No. 29 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.5 6dB Bandwidth Measurement 4.5.1 Limits of 6dB Bandwidth Measurement The minimum of 6dB Bandwidth Measurement is 0.5MHz. 4.5.2 Test Setup Spectrum EUT Attenuator Analyzer 4.5.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.5.4 Test Procedure Measurement Procedure REF a. Set resolution bandwidth (RBW) = 100kHz b. Set the video bandwidth (VBW) ≥ 3 x RBW, Detector = Peak. c. Trace mode = max hold. d. Sweep = auto couple. e. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission 4.5.5 Deviation from Test Standard No deviation. 4.5.6 EUT Operating Condition The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF180102C33C-37 Page No. 30 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

4.5.7 Test Results FCC ID: PZWBHT1700BQL (initial) 802.11a 6dB Bandwidth Minimum Limit Channel Frequency (MHz) Pass / Fail (MHz) (MHz) 149 5745 16.43 0.5 Pass Spectrum Plot of Worst Value 802.11a PZWBHT1700QG (new) 802.11a 6dB Bandwidth Minimum Limit Channel Frequency (MHz) Pass / Fail (MHz) (MHz) 149 5745 16.41 0.5 Pass Spectrum Plot of Worst Value 802.11a 802.11n (HT20) Report No.: RF180102C33C-37 Page No. 31 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF180102C33C-37 Page No. 32 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10

Appendix – Information of the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF180102C33C-37 Page No. 33 / 33 Report Format Version:6.1.1 Reference No.: 180102C33, 180420C16, 180604C10


Document Created: 2019-03-27 02:01:29
Document Modified: 2019-03-27 02:01:29
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC