RF Exposure Info

FCC ID: PZK-36004R

RF Exposure Info

Download: PDF
FCCID_3882528

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Report No.: SZEM180400312002 Fax: +86 (0) 755 2671 0594 Page: 1 of 7 Email: ee.shenzhen@sgs.com 1 Cover page SAR Evaluation Report Application No.: SZEM1804003120CR Applicant: Summer Infant, Inc Address of Applicant: 1275 Park East Drive, Woonsocket, Rhode Island, United States Manufacturer: EXVISION INDUSTRIES LIMITED Address of Manufacturer: NO21, NANXING 3RD ROAD, NANFANG IND PARK, BEIZHA, HUMEN, DONGGUAN, CHINA P.R.C. Factory: EXVISION INDUSTRIES LIMITED Address of Factory: NO21, NANXING 3RD ROAD, NANFANG IND PARK, BEIZHA, HUMEN, DONGGUAN, CHINA P.R.C. Equipment Under Test (EUT): EUT Name: Audio Baby Monitor Model No.: 36004R FCC ID: PZK-36004R Trade mark: SUMMER Standard(s) : 47 CFR Part 1.1307 47 CFR Part 2.1093 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2018-04-23 Date of Test: 2018-04-27 to 2018-05-15 Date of Issue: 2018-05-18 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Keny Xu EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd Shenzhen Branch. Report No.: SZEM180400312002 Page: 2 of 7 2 Version Revision Record Version Chapter Date Modifier Remark 01 2018-05-18 Original Authorized for issue by: Leo Li /Project Engineer Eric Fu /Reviewer This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS—CSTC Standards Technical Services Co., Ltd Shenzhen Branch. Report No.: SZEM18os0081 2002 Page: s o7 3 Contents Page 1. covenprce 2 version s contents a eenena. inrormation, Wanalla 41. Generss DescurnonorEUt 42. TesrLocmon 43. TesrProumy 44. DevietionrmonStavomos 45. AevorteumessronSraronzoConomons 46. Omex InromamonReavesteosy meCustoner 51— RFExrosuseConpumeeRequnenes rrangtmaniee arvn on e a ennntonnnctenovna ocmsc iasrencmcmoncennaacutenmie n Ionpinolemoodomycocomunniencsicmilermecramemetemin

SGS-CSTC Standards Technical Services Co., Ltd Shenzhen Branch. Report No.: SZEM180400312002 Page: 4 of 7 4 General Information 4.1 General Description of EUT Power supply: Ni-MH battery：3.6V 800mAh rechargeable battery Adapter Model:P6 0750500 Input:AC 100~240V 50/60Hz 250mA Output:DC 7.5V 500mA Cable: DC cable: 195cm unshielded Spectrum Spread Frequency Hopping Spread Spectrum(FHSS) Technology: Antenna Gain 0 dBi Antenna Type PIFA Channel Spacing 3.375 MHz Number of Channels 19 Modulation Type GFSK Operation Frequency 2410.875 MHz to 2471.626 MHz This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd Shenzhen Branch. Report No.: SZEM180400312002 Page: 5 of 7 4.2 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. 4.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G- 20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Industry Canada (IC) Two 3m Semi-anechoic chambers and the 10m Semi-anechoic chamber of SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab have been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 4620C-1, 4620C-2, 4620C-3. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd Shenzhen Branch. Report No.: SZEM180400312002 Page: 6 of 7 4.4 Deviation from Standards None. 4.5 Abnormalities from Standard Conditions None. 4.6 Other Information Requested by the Customer None. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS—CSTC Standards Technical Services Co., Ltd Shenzhen Branch. Report No.: SZEM18os0081 2002 Page: 7 oi 5 SAR Evaluation 5.1 RF Exposure Compliance Requirement 5111. Standard Requirement According to KDB417498001 General RF Exposure Guidance 6 431. Stendalone SAR test exclusion considerations Unless specticaly required bythe publhed RF expocure KOBprocedures, sandalone 1—9 head orbody and 10.3 extremiy SAR avaluation for generalpopulaton exposure conditons, by messurement o numercalsimulation, is not required when the corresponding SA Exclusion Threshold condion,isted belon,is satitfed is The 1—4 and 10.4 SAR test exchision hresholdsfor 100 MHe to 6 GH attet separation distances £30 mm are determined by {(max. powero channel.including tune—uptoerance, mW (min.test separation ditance,mm}]® [M(GHe] # 3.0for 1 SAR and s 7.5 for 10. extrerty SAR, where 1(GHzis the RF channeltransmi requncy in GHtz Power and ditance are rounded to the nearest mW and mm before ealculaion*" The resul s rounded o one dacimal Bsce for comparion The test exclisions are appllable only when the mirimum test separaton ditance iss 50 mm and for bransmisionfrequencles between 100 MHz and & GHe. When the minimum test separaton distance is <5 mm, detance of 5 mm is appled to determine SAR test exclsion 518 EUT RF Exposure "The Mex. Average pover (ncliding tuneup telerance)is 5.78 cBm on he lowestcham22410875 GHz(*) 5.73 dBm legarthrmic terms convart to numerie rasult is nearly3.74 mW According to the formula. calculte thetst exclusionthrosholds General AFEsposurt (Wentoovgn teemef ctanaat ctsingurncaytamrnen200 n {FGiH) gnininrverstinrerermin) General AFEposure = @74 mW/mx f2—110875 6e =116 @ SAR requiremont s—30 @ m<@ So the SAreport s no required (*) Max. powerretarto Report No :S2EMT8O100T2001 —End ofthe Report — rrangtmaniee arvn on e oia ennntonnnctenovna ocmsc iasrencmcmoncennaacutenmie n Ionpinolemoodomycocomunniencsicmilermecramemetemin


Document Created: 2018-06-09 06:30:24
Document Modified: 2018-06-09 06:30:24
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC