User Manual

FCC ID: PZK-28030R

Users Manual

Download: PDF
FCCID_1385767

If you       rience a problem that is not noted In this manual,                                                                  20030/28035
please do not retum the product to the store. Our Customer                                                                       Pleaseread the
Sorvice Department ma have a simple solution to your problem.                                                               following instructions
Plouse contact us at 1—800—268—4237 or emall us at                                                                      ond warnings corefully.
customerservice@summerinfant.com,
                                                                                                                   Keep this instruetion manual
FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to                                                  for future reference.
the following two conditions: (1) This device may not causeharmful                                                             Tools required:
Interfarence,
and g').lhlu devico must accapt any Interferance recelved, Including                                                screwdriver (not included)
interference that may cause undesired operatlon.                                                       For technical support see back page.
CAUTION: Changes or modifications not expressly approved by Summer                                      For use with children from birth and up.
Infant may void the users authorty to operate this equipment.
NOTE;: This equipment has beentested and found to comply with the limits
for a Class B dightal device, pursuant to part 15 of the FCC: Rules. These
                                                                                                                          AWARNING:
limits are designed to            reasonable protection against harmful                                                   Adult assembly required.
interference in a residential nstallation, This equipment generates, vses                                              Keep small parts away from
and can radiate radio frequency energy and,i not installed and used in                                                  children when assembling.
accordance with the Instructions, may cause harmiulInterference to radlo
communications, However, thare is no guarantes that Intorforance will not
occur in a particular installation.I this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interlerence by one or more of the following measvres:
* Reorient or relocate the recelver
* Increase the separation between the equipment and the receiver                          s y                  ts
* Connect the equipment into an outlet on a circult different from that
  to which the receiver is connectad.
+ Consultthe clealer or an exparienced radlo/TV techniclan for halp
CAUTION: 1. To comply with FCC RF exposure compliance requirements, a
separation distance at least 20 cm must be maintained between the
antenna of this device and all persons, 2. This transmitter must not be
'co-locnkt‘s.fl or operating in conjunction with «y other antemna or
ransmitter
Summer Infant, Inc. Monttor Warranty Policy
SummerInfont, Inc. wl repalr or replace (at our option) your unit froe of
charge for 12 months from the date of purchase i the unit is defective in
workmanship or materlals. To clalm your repalt/raplacoment, the product                                                 a
must be retumed to Summer Infant along with a copy of the original                                                 Summer                    p
g:rcha!e receipt.In the absence of the purchase receipt, the warranty wl
   12 months from the date of manulacture. This warranty does not apply to
normal wear or damage from misuse, abuse, improper storage and
haneling, Installstlon, secident, uncuthorlzed repalt or altaretion. Placise
contact our CustomerSorvice Departmant by phone at 1—800—268.4237
or via e—mail at customerservice@summerinfant.com for details.



                             We LOVE our curtomers!                                  INSTRUCTION MANUAL
                       H    Cc
                      wwrw.summerinfant.com
                We at Summer Infnt stind behind all o our productsIf
                                                                                     BEST VIEW*" DIGITAL COLOR
                you are not completaly satisfed or have any quertione,
                  Jease contact our customer service depurtment ae                   VIDEO MONITOR
                     +2484337 or curtommeservice       mmerinfin.com
                       (For Europe call +44 (208 420 4429 or
                       customerserviceué@summerinfint.com)


Surumer Infant, Inc.      Svamer Infent Esrope, ITD.      @2010 Surmer Infors, Ic.
Ters ark Font Drve
Weomociat, 8 02895 USA
12
                          Ofice Sute 6 Second Flor        Crlors and ies may vary
                          BoumaballHoue, BoumahallRead Pecieretalninfomrton
                          Bushy, Hertordatine WDZS SHP UK ferhturtelerence.
                          +44 (0) 208 420 tz              MADE IN CHINA.. oo
                                                                                     A CAUTION:
                                                                   408—000647—00
                                                                                     KEEP SMALL PARTS QUT OF CHILD‘S REACH.




 IMPORTANT SAFETY INSTRUCTIONS                                                     A. BATTERY WARNING:
11) Power Lines— An outside antenna system should not be located in the            (continued)
vicinity of ovarhead powor lines or other aloctric light or powor circuits, or     * Do not short—circuit supply terminals.
where it can fall Into such power lines or clrcults as contact with them           * Only the recommended batteries or equivalent are
might be fatal.                                                                      to be used, voits and size.
12) Overtoading— Do not overtoad wall outlets, extension cords, or Integral
convenience receptacies as this can result in a risk of fire or aloctric           * Remove batteries when product is stored for long
shock.                                                                               periods of time or when batteries are exhausted.
13) Object and Liquid Entry— Never push objects of any kind into this              * Dispose of exhausted batteries properly.
product through openings as they may touch dangerous voitage points or             * Do not recharge non—rechargeable batteries.
shorl—out parts that could result in a fire o electric shock. Never spill liquid
of any kind on the product.                                                        * Rechargeable batteries are only to be charged
14) Servicing— Do not attempt to service this product yourseff as apening or         under adult supervision.
removing covers may expose you to dangerous voltage or other hazards.              * Keep all batteries away from children.
Refer all servicing to qualified service personnel.
15) Damage Requiring Servics— Unplug this product from the wall outiet             FEATURES & COMPONENTS
and refer servicing to qualified service personnel under the following             (for monitor):
conditions:
  a) When the power—supply cord or plug is damaged,                                MONITOR:
  b) it liquid has been spilled, or objacts have fallon Into                             Powor & low BatteryLED
     the product,
                                                                                         (Wsht wilinato cmber                      Monitar
                                                                                         when battor i lu}
  ) If the product has been exposed to rain or water,                                              2]—Onick View                             se
  ) If the product does not operate normally by following the                                                 ¥ideo Onon                s         o+
     operating instructions. Adjusting only those controls that are                                         :Sllll I.Ig..ib'.l
     covered by the operating Instructions as an Improper
     adjustment of other controls may result in damage and will
    often require extensive work by a qualifled technician to
    restore the product to it‘s normal operation,
  ) If the product has been dropped or damaged in any way, and
  f) When the product exhibits a distinct changein parformance—
     this Indicates a need for service.
16) Replacamont Parts— When replacoment parts are required, be sure the
service techniclan has used replacoment parts specified by the manufac—
turer or have the same charactoristics as tho original part, Unsuthorizad                       J
                                                                                                T AatGnuen
substffutions may result n fire, alectric shock, or other hazards.                              t [— Nighttime IED‘s
17) Safety Check— Upon completion of any service or repirs to the product,                                   (for darkaned room)
ask the service technician to perform safety chocks to determina that the                          az      |— Camera
                                                                                                        ——I— Mrophono
product is in proper operating condition.
18) Wall or Calling Mounting— The product should be mounted to a wall or
celling only as recommended by the manufacturer,                                            |—=—thotke
                                                                                                (on battomot unt)
19) Heat— The product should be situated away from heat sources such as
                                                                                   AC Aduptor ()             AV Cable
radiators, heat registers, stoves, or other products (including ampliiers)
that produce heat.

                                                                                            3


SET UP & USE:                                                          PROBLEM SOLVING:
CAMERA                                                                 No picture or sound on Monitor
                                                                        * Make sure the Monitor is turned on
Table Top or Wall Mounting:                                             * Make sure the AC Adapters are plugged in
                                                                        * Make sure the outlets are working
Determine a location for the Camera that will provide                   * Make sure Monitor and Camera are SYNCHED up.
the best view of your baby in his crib. Place the Camera on               {refer to "Synching MONTTOR and CAMERA® section on
a flat surface, such as a dresser, bureau, or shelf. Or mount
the Camera on a wall. CAUTION: BE SURE NOT TO PLACE
                                                                          page 7)
CAMERA IN CRIB OR WITHIN ARM‘S REACH OF BABY. Do                       Sound but no picture on Monitor
not place the Camera near open windows, direct sunlight or              * Press the Quick ViewVideo On/Off Button once to tum on
heat sources. Be sure to test reception and Camera                        video mode
positoning before mounting to a wall (see "Testing Your                 * Try adjusting the Brightness Control on the Monitor
Initial Set Up? section).                                               * Test reception by moving the Monitor and/or CAMERA to
                                                                          different locations
To Wall Mount:
                                                                       Picture but no sound
1} Pre—drill a hole in the wall                 jwad t—v‘(       X      * Turn up the valume on the Monitor using the Volume Control
   (3/716, 4.8mm, drill bit) (Figure A}.                     N
                                                                       Picture not clear
2) Insert the waill anchor (included)                                    * Position the Monitor closer to the CAMERA if necessary
   into the hole and with a hammer,                                      * Move Monitor away from other monitors, cordless phones,
   tap gently on the end until the wall                                    walkie—talkies, otc.
   anchor is flush with the wall,                                        * Try adjusting the Brightness Control on the Monitor
                                                                         * Test reception by moving the Monitor and/or CAMERA to
3) Insert the screw (included) into the                                   differentlocations
   wall anchor and tighten screw until
   only 1/4" (6.2mm)of the screw                                       Squeating sound
   is exposed.                                                           * Move the CAMERA and the Monitor furtheraway from
                                                                           each other
4) Insert AC Adapter into the Camera‘s
   AC Adapter Jack.

5) Slide the back of the Camera down onto the screw until
   the Camera is secure to the wall.
6) Plug the AC Adapter into a standard electrical outlet.

7) Secure the cord to the wall using the 6 Security Clips
   included to keep cord away from baby‘s reach (Figure B).

8) Siide switch on side of Camera to ON and the
    POWER ON LED will iluminate solid green.


MONITOR
To Use in Video and Audio Mode:
Step 1: Place the Monitor in the room from which you want to monitor
your baby (ie, bedroomor lving room). Plug an    Adapter into the
AC Adapter Jack and the other end into a standard electrical outlet.
top of the unit.

4




SET UP & USE (continued):                                                SET UP & USE (continued):
Testing Your Initlal Setup:                                              «* To conserve battery power, use AC Adapter whenever possible.
Be sure to test your Monitor‘s reception before initial use.                 Remove battery during long periods of non—use.
We also recommend testing your Monitor‘s reception periodically,
Please keep in mind that the Best View* Digital Color Video Monitor      + If battery is exhausted, remove immediately from the Monitor.
will not provide the same level of picture quality as your television
with cable, satellte dish, or digital service.                           * Properly dispose of exhausted battery.

To test reception you will need two adults. One adult should view the    Battery Installation:
picture on the Monitor while the other isin the nursry to adjust the
Camera. Often the quality of the reception can be improved by            Note: This stop is only needed if roplacing battory,
alightly repositioning the Camera, Monitor, or both. It may help to      1. Locate the battery compartment door on back of monitor.
place a stuffed animal or dal in the crib to simulate the position and   2. Remove battery door screw with flat head
size of your baby. Adjust the picture quality on the Monitor as             acrewdriver.
needed by using the Brightness Adjustment within monitor menu.           3. Remove battery door and battery.
                                                                         4. Insert new battery and replace battery door
To test sound qualty, have one adult speak in both a normaltone             (Figure C).
and a whisper near the crib. Adjust volume on the Monitor‘s
Volume Adjustment as needed.                                             Footrost:                                                E
                                                                         The Monitor has a bulltin footrest for tabletop
                                                                         convenience. Simply fllp out footrest and place                   \
To Use the Video Monitor in Portable Mode:                               the Monitor on a stable, level surface (Figure E}.
                                                                                                                                   /
For use in portable mode, the Monitor requires 1 3.7V LITHIUM—ION
rechargeable battery (included).                                         Synching Monitor and CAMERA:                              Cattaly"
Tips:                                                                    The Monitor and Camera are synched at the factory
                                                                         for privacy reasons. If the Monitor and Camera are
* Before using Monitor in portable mode (battery], be sure to            not synching with each other for any reason, please
  charge battery 12—16 hours.                                            sync them as described below.

* To charge battery, plug the Monitor AC Adapter into the                Step 1: Move the Monitor to the same area as the
  Monitor‘s AC Adapter Jack. Plug the other end into a standard          Camera. With both the Camera and Monitor on, press the *POWER®
  electrical outlet.                                                     button once and using Comera/Menu control panel scroll to the Right
                                                                         and Up to "ADD CAM". Then press the OK/Zoom button.
* After Initial 12—16 hour charge,to achieve optimal battery lffe,
  charge battery overnight and unplug all day during use,                Stop 2: The Power LED flashes green and within 8 seconds, press the
                                                                         "CODE" button once at the side of the camera.
* Note: Only charge battery when low indicator light comes on.
  Constant recharging of your battery before low battery indicator       Step 3: The Power LED on the camera will flash and you should then
  light comes on will decrease the life of your batteries.               see a picture from the Camera on the Monitor.

* When battery is low, the Power On LED williluminate amber,             Step 4: If this is unsuccessful, you should repeat steps above making
  inlicating that the battery needs to be recharged.                     sure the Camera and Monitor are close enough to each other for
                                                                         synching.



Document Created: 2019-09-18 11:40:44
Document Modified: 2019-09-18 11:40:44

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC