Test report

FCC ID: PZ3-FM72

Test Report

Download: PDF
FCCID_183834

L.S. Compliance, Inc. W66 N220 Commerce Court Cedarburg, WI 53012 262-375-4400 _____________________________________________________________________________ COMPLIANCE TESTING OF: Quartex Synchronization Transmitter Model FM-72 PREPARED FOR: Quartex, Division of Primex, Inc. 965 Wells Street Lake Geneva, WI 53147 TEST REPORT NUMBER: 301190 T DATE(S) OF TESTING: October 19th and 30th, 2001 All results of this report relate only to the items that were tested. This report is not to be reproduced, except in full, without written approval of L. S. Compliance, Inc.

Table of Contents Section Description Test Page Type Index 2 1 L. S. Compliance in Review 3 2 A2LA Certificate of Accreditation 4 3 A2LA Scope of Accreditation 5 4 Validation Letter-U.S. Competent Body for EMC 6 Directive 89/336/EEC 5 Signature Page 7 6 Product and General Information 8 7 Product Description 8 8 Test Requirements 8 9 Summary of Test Report 9 10 Introduction 9 11 Purpose 9 12 Radiated Emissions Test, enclosure FCC 10-15 13 Conducted Emission Test, AC line FCC 16-20 14 Test Equipment List 21 Appendix A Part 90 Type Acceptance, Conducted Measurements 22 L.S. Compliance, Inc. Page 2 of 22 Test Report Number: 301190 T Prepared For: Quartex

1. L. S. Compliance In Review L. S. Compliance, Inc. is located in Cedarburg, Wisconsin – United States. We may be contacted by: Mail: L. S. Compliance, Inc. W66 N220 Commerce Court Cedarburg, Wisconsin 53012 Phone: 262-375-4400 Fax: 262-375-4248 E-mail: eng@lsr.com As an EMC Testing Laboratory, our Accreditation and Assessments are recognized through the following: A2LA – American Association for Laboratory Accreditation Accreditation based on ISO/IEC 17025 : 1999 with Electrical (EMC) Scope of Accreditation A2LA Certificate Number: 1255.01 U. S. Conformity Assessment Body (CAB) Validation Validated by the European Commission as a U. S. Conformity Assessment Body operating under the U. S. /EU, Mutual Recognition Agreement (MRA) operating under the European Union EMC Directive 89/336/EEC, Article 10.2. Date of Validation: January 16, 2001 Federal Communications Commission (FCC) – USA Listing of 3 Meter Semi-Anechoic Chamber based on 47CFR 2.948 FCC Registration Number: 90756 Listing of 3 and 10 meter OATS based on 47CFR 2.948 FCC Registration Number: 90757 Industry Canada On-file, 3 Meter Semi-Anechoic Chamber based on 47CRF 2.948 File Number: IC 3088 On-file 3 and 10 Meter OATS based on RSS-210 File Number: IC 3088-A L.S. Compliance, Inc. Page 3 of 22 Test Report Number: 301190 T Prepared For: Quartex

2. A2LA Certificate of Accreditation L.S. Compliance, Inc. Page 4 of 22 Test Report Number: 301190 T Prepared For: Quartex

3. A2LA Scope of Accreditation L.S. Compliance, Inc. Page 5 of 22 Test Report Number: 301190 T Prepared For: Quartex

4. Validation Letter – U.S. Competent Body for EMC Directive 89/336/EEC L.S. Compliance, Inc. Page 6 of 22 Test Report Number: 301190 T Prepared For: Quartex

5. Signature Page Prepared By: November 9, 2001 Teresa A. White, Document Coordinator Date Tested By: November 9, 2001 Kenneth L. Boston, EMC Lab Manager Date Tested By: November 9, 2001 Thomas T. Lee, EMC Engineer Date NARTE Test Lab Engineer, ALT-0064-E Approved By: November 9, 2001 Kenneth L. Boston, EMC Lab Manager Date PE#31926 Licensed Professional Engineer Registered in the State of Wisconsin, United States L.S. Compliance, Inc. Page 7 of 22 Test Report Number: 301190 T Prepared For: Quartex

6. Product and General Information Manufacturer: Quartex, Division of Primex, Inc. Model No.: FM-72 Serial No.: Pre-production Description: Data Transmitter Frequency Range: 72.0 – 73.0 MHz 7. Product Description The FM-72 is a data transmitter, which sends telemetry to various co-located paging receivers, which are located in wall clocks, for the purpose of time synchronization. It is provided for by 47 CFR, Part 90.238 as a telemetry device. 8. Test Requirements The following FCC requirements are met: 47 CFR, 2.1053, 90.257(b)(2), 90.210. L.S. Compliance, Inc. Page 8 of 22 Test Report Number: 301190 T Prepared For: Quartex

9. Summary of Test Report DECLARATION OF CONFORMITY The Equipment Under Test (EUT) was found to MEET the requirements as described within the specification of Title 47 CFR FCC, Part 90, Subpart J, and Part 2.1053 Radiated Spurious Emissions for a low-power non-broadcast transmitter. 10. Introduction On October 19, 2001 a series of Radiated Emission tests were performed on the EUT. These tests were performed using the procedures outlined in ANSI C63.4-2001 for unintentional radiators, and in accordance with the limits set forth in FCC Part 90 for a non-voice and other specialized operation transmitters. These tests were performed by Kenneth Boston, EMC Lab Manager and Thomas T. Lee, EMC Engineer/NARTE Test Lab Engineer of L.S. Compliance. 11. Purpose All Radiated Emission tests upon the EUT were performed to measure the emissions in the frequency bands described in title 47 CFR, FCC Part 90, including 90.210 (general technical parts) to determine whether these emissions are below the limits expressed within the standards. AC line Conducted Emissions were also measured and compared to the CFR, Part 15.207 limits, as additional technical data. These tests were performed in accordance with the procedure described in the American National Standard for methods of measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz (ANSI C63.4-2001). Another document used as a reference for the EMI Receiver specification was the Comite International Special Des Perturbations Radioelelectriques (CISPR) Number 16-1, 1993. L.S. Compliance, Inc. Page 9 of 22 Test Report Number: 301190 T Prepared For: Quartex

12. Radiated Emissions Test Test Setup The test setup was assembled in accordance with ANSI C63.4-2001. The Quartex FM-72 was placed on an 80cm high non-conductive table centered on a flush mounted 2-meter diameter turntable inside the 3 Meter Semi-Anechoic, FCC listed Chamber located at L. S. Compliance, Inc., Cedarburg, Wisconsin. The EUT was operated in normal mode, using AC power as provided by a wall transformer. The transmitter was set to operate continuously, on one channel (72.24 MHz), and a suitable artificial antenna load was connected to the antenna port for the duration of the radiated emissions tests. Signal levels that were seen to be close to the regulatory limits were verified using a substitution method, with a tuned Dipole. The applicable limits are provided at a 3 meter distance. The calculations to determine these limits are detailed in the following pages. Please refer to Appendix A for a list of the test equipment. Test Procedure Spurious radiation measurements were performed on the EUT in the 3 Meter Semi-Anechoic, FCC listed Chamber, located at L. S. Compliance, Inc. in Cedarburg, Wisconsin. The frequency range from 30 MHz to 1000 MHz was scanned, and levels were manually noted at the various fixed degree settings of azimuth on the turntable and antenna height. The EUT was placed on the non-conductive wooden table in the 3 Meter Semi-Anechoic Chamber, with the antenna mast placed such that the antenna was 3 meters from the test object. A Biconical Antenna was used to measure emissions from 30 MHz to 300 MHz, and a Log Periodic Antenna was used to measure emissions from 300 MHz to 1000 MHz. The maximum radiated emissions were found by raising and lowering the antenna between 1 and 4 meters in height, using both horizontal and vertical antenna polarities. L.S. Compliance, Inc. Page 10 of 22 Test Report Number: 301190 T Prepared For: Quartex

Test Equipment Utilized A list of the test equipment and antennas utilized for the Radiated Emissions test can be found in Appendix A. Included in this list are calibration information and equipment descriptions. All equipment is calibrated and used according to the operations manual supplied by the manufacturer. All calibrations of the antennas used were performed at an N.I.S.T. traceable site. In addition, the Connecting Cables were measured for losses using a calibrated Signal Generator and a HP 8546A EMI Receiver. The resulting correction factors and the cable loss factors from these calibrations were entered into the HP 8546A EMI Receiver database. As a result, the data taken from the HP 8546A EMI Receiver accounts for the antenna correction factor as well as cable loss or other corrections, and can therefore be entered into the database as a corrected meter reading. The HP 8546A EMI Receiver was operated with a bandwidth of 120 kHz for measurements below 1 GHz. Both the Peak and Quasi-Peak Detector functions were utilized. Test Results The EUT was found to MEET the Radiated Emissions requirements of Title 47 CFR, FCC Part 90.257(b)(2) for an unintentional radiator (Canada RSS-210). The frequencies with significant signals were recorded and plotted as shown in the Data Charts and Graphs. Notes: L.S. Compliance, Inc. Page 11 of 22 Test Report Number: 301190 T Prepared For: Quartex

Calculation of Radiated Emissions Limits FIELD STRENGTH OF SPURIOUS/HARMONIC FREQUENCIES In accordance with Section 90.210 (2.1053) All out of band spurious emissions must be below the mean power of the carrier by at least: 43 + 10 log(carrier power) which for a 1.0 watt rating on the test sample is: 43 + 10 log(1)) 43 = 43 dBc -43 dBc from 30 dBm = -13. dBm FIELD STRENGTH OF PART 90 LIMIT: AT R = 3 METERS DSTANCE FROM THE STANDARD REFERENCE FORMULA FOR P OWER TRANSMITTED VERSUS ELECTRIC FIELD: Pt = (R**) x E** / 30 Then to convert to dB: Pt = 20logE + 20log(R) - 10log(30) Insert additional terms to convert watts to milli-watts (in dB) and volts to micro-volts (in dBµV): Pt = 20logEµv -20 log(1,000,000) +10log(1000) +20log(3) - 10log(30) Pt = 20logEµv - 120 +30 +9.54 - 14.77 Pt = 20logEµv - 95.23 OR; 20logEµv = Pt (in dBm) + 95.23 E (in dBµV) = -13 dBm + 95.23 = 82.23 dBµV/m , at 3 meters Summary of Results and Conclusions Based on the procedures outlined in this report, and the test results included in Appendices A and B, it can be determined that the EUT does MEET the emission requirements of Title 47 CFR, FCC Part 15, Subpart B (Industry Canada RSS-210) for an unintentional radiator. The enclosed test results pertain to the samples of the test item listed, and only for the tests performed per the data sheets. Any subsequent modification or changes to the test items could invalidate the data contained herein, and could therefore invalidate the findings of this report. L.S. Compliance, Inc. Page 12 of 22 Test Report Number: 301190 T Prepared For: Quartex

Measurement of Electromagnetic Radiated Emissions upon a 3 Meter I. C. Listed Site Frequency Range inspected: 30 MHz - 1,000 MHz Date of Test: October 19, 2001 Manufacturer: Quartex, Div. Of Primex, Inc. Location of Test: L. S. Compliance, Inc. Model No.: FM-72 W66 N220 Commerce Court Cedarburg, WI 53012 Serial No.: Pre-Production Configuration: Continuous TX on 72.24 MHz Specifications: 90.257(b)(2), 2.1053 Detector(s) Used: Peak Distance: 3 Meters Equipment: HP 8546A EMI Receiver; EMCO 3115 Double-Ridged Waveguide Antenna; EMCO 3146A Log Periodic Antenna; EMCO 3110 Biconical Antenna The following table depicts the level of significant emissions found: Frequency Antenna Height Azimuth EMI Meter Reading Margin (MHz) Polarity Channel (meters) (0° - 360°) (dBµV/m) (dBµV/m) (dB) 90.1 V -- 1.0 180° 30.0 82.2 52.2 180.2 V -- 1.0 180° 25.0 82.2 57.2 723.0 V -- 1.0 180° 29.0 82.2 53.2 Notes: Emissions seen with antenna port terminated with a 50 ohm terminating load. All other signals seen were even further below the Part 90 limit of −13 dBµ except the fundamental, which is covered in the Appendix. L.S. Compliance, Inc. Page 13 of 22 Test Report Number: 301190 T Prepared For: Quartex

Photos Taken During Radiated Emissions Testing Test Setup for Radiated Emissions Testing in the 3 Meter Chamber View of the EUT during the Radiated Emissions Testing. Antenna in place, but port internally terminated with a 50 Ohm load. L.S. Compliance, Inc. Page 14 of 22 Test Report Number: 301190 T Prepared For: Quartex

Graphs made during Radiated Emissions Testing Signature Scan of Radiated Emissions Vertical Polarity, 30 MHz – 300 MHz Signature Scan of Radiated Emissions Horizontal Polarity, 30 MHz – 300 MHz L.S. Compliance, Inc. Page 15 of 22 Test Report Number: 301190 T Prepared For: Quartex

Signature Scan of Radiated Emissions Vertical Polarity, 30 MHz – 1000 MHz Signature Scan of Radiated Emissions Horizontal Polarity, 300 MHz – 1000 MHz L.S. Compliance, Inc. Page 16 of 22 Test Report Number: 301190 T Prepared For: Quartex

13. Conducted Emissions Test (AC Line) Test Setup The Conducted Emissions test was performed within the 3 Meter Semi-Anechoic, FCC listed Chamber, or FCC listed Shielded Room, located at L.S. Compliance, Inc. in Cedarburg, Wisconsin. The test area and setup are in accordance with ANSI C63.4-2001 and with Title 47 CFR, FCC Part 15, Subpart B (Industry Canada RSS-210). The EUT was placed on a non-conductive wooden table, with a height of 80 cm above the reference ground plane. The EUT’s power supply was plugged into a 50Ω (ohm), 50/250 µH Line Impedance Stabilization Network (LISN). The AC power supply of 120V was fed into the 3 Meter Semi-Anechoic Chamber via an appropriate broadband EMI Filter, and then to the LISN line input. Final readings were then taken and recorded. After the EUT was setup in the 3 Meter Semi- Anechoic Chamber and connected to the LISN, the RF Sampling Port of the LISN was cabled to a 10 dB Attenuator-Limiter, and then to the HP 8546A EMI Receiver. The EMCO LISN used has the ability to terminate the unused port with a 50Ω (ohm) load when switched to either L1 (line) or L2 (neutral). Test Procedure The appropriate frequency range and bandwidths were entered into the EMI Receiver, and measurements were made. The bandwidth used for these measurements is 9 kHz, as specified in CISPR 16-1 (1993), Section 1, Table 1, for Quasi-Peak and Average detectors in the frequency range of 150 kHz to 30MHz. Final readings were then taken and recorded. Test Equipment Utilized A list of the test equipment and accessories utilized for the Conducted Emissions test is found in Appendix A. This list includes calibration information and equipment descriptions. All equipment is calibrated and used according to the operations manual supplied by the manufacturer. Calibrations of the LISN and Limiter are traceable to N.I.S.T. All cables are calibrated and checked periodically for malfunction. The emissions are measured on the HP 8546A EMI Receiver, which has automatic correction for all factors stored in memory and allows direct readings to be taken. Test Results The EUT was found to MEET the Conducted Emissions requirements of FCC Part 15, Conducted Emissions. See the Data Charts and Graphs for more details of the test results. Notes: This test is not required of a Part 90 device, and was performed only as an additional step to insure a higher performance level in the environments for which this product is intended. L.S. Compliance, Inc. Page 17 of 22 Test Report Number: 301190 T Prepared For: Quartex

Measurement of Electromagnetic Conducted Emission in the Shielded Room Frequency Range inspected: 450 KHz to 30 MHz Date of Test: October 30, 2001 Manufacturer: Quartex, Div. Of Primex, Inc. Location of Test: L. S. Compliance, Inc. Model No.: FM-72 W66 N220 Commerce Court Cedarburg, WI 53012 Serial No.: Pre-Production Configuration: Continuous TX on 72.24 MHz Specifications: 15.207 used, not required Detector(s) Used: Quasi-Peak Distance: N/A Equipment: HP 8546A EMI Receiver; EMCO 3816nm L.I.S.N. Frequency EMI Reading Limit Margin (MHz) Line (dBµV/m) (dBµV/m) (dB) .597 L2 44.8 48.0 3.2 .897 L2 43.6 48.0 4.4 1.040 L2 43.8 48.0 4.2 .597 L1 47.3 48.0 0.7 .898 L1 46.2 48.0 1.8 1.370 L1 45.5 48.0 2.5 L.S. Compliance, Inc. Page 18 of 22 Test Report Number: 301190 T Prepared For: Quartex

Photos Taken During Conducted Emissions Testing Test Setup for Conducted Emissions Testing Views of the EUT during the Conducted Emissions Testing. L.S. Compliance, Inc. Page 19 of 22 Test Report Number: 301190 T Prepared For: Quartex

Graphs made during Conducted Emissions Testing Signature Scan of Conducted Emissions, Line 1 Signature Scan of Conducted Emissions, Line 2 L.S. Compliance, Inc. Page 20 of 22 Test Report Number: 301190 T Prepared For: Quartex

14. Test Equipment List Calibration Information Asset # Manufacturer Model # Serial # Description Date Due Date AA960004 EMCO 93146 9512-4276 Log-Periodic Antenna 02-28-01 02-28-02 AA960005 EMCO 3110B 9601-2280 Biconical Antenna 09-24-01 09-24-02 EE960004 EMCO 2090 9607-1164 Mast/Ttable Controller N/A N/A EE960013 HP 8546A 3617A00320 Receiver RF Section 11-01-00 11-01-01 EE960014 HP 85460A 3448A00296 Receiver Pre-Selector 11-01-00 11-01-01 N/A LSC Cable 0011 3 meter ½” Heliax Cable 12-07-00 12-07-01 N/A LSC Cable 0038 1 meter RG 214 Cable 12-07-00 12-07-01 N/A LSC Cable 0050 10 meter RG 214 Cable 12-07-00 12-07-01 N/A LSC Attenuator 10 db Attenuator Note 1* - Equipment calibrated within a traceable system. Table of Expanded Uncertainty Values, (K=2) for Specified Measurements Measurement Type Particular Configuration Uc Value in Appropriate Units Radiated Emissions 3 Meter Chamber, 4.24 dB Biconical Antenna Radiated Emissions 3 Meter Chamber, 4.80 dB Log Periodic Antenna Radiated Emissions 10 Meter OATS, 4.18 dB Biconical Antenna Radiated Emissions 10 Meter OATS, 3.92 dB Log Periodic Antenna Conducted Emissions Shielded Room/EMCO LISN 1.60 dB L.S. Compliance, Inc. Page 21 of 22 Test Report Number: 301190 T Prepared For: Quartex

APPENDIX A Part 90 Type Acceptance, Conducted Measurements L.S. Compliance, Inc. Page 22 of 22 Test Report Number: 301190 T Prepared For: Quartex


Document Created: 2019-07-02 16:25:42
Document Modified: 2019-07-02 16:25:42
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC